Answers
Answer:
I think around 77
Explanation:
hold on let me look more into it
Given 0.10M NaOH (0.10mol/lit NaOH)
0.2M H3PO4 ( 0.2 mol/lit H3PO4)
15 ml of H3PO4 or 0.015 lit of H3PO4
Find the volume of NaOH needed to neutralize the solution
Relate moles of H3PO4 with the moles of NaOH with the help of coefficients in front of NaOH and H3PO4 seen in balanced equations.
moles ↔ Litre use the definition of molarity (moles/liters)
Start with what is given for H3PO4
0.015 lit of H3PO4 x 0.2 moles of H3PO4 / lit of H3PO4 x 3 moles of NaOH/1 mole of H3PO4 x lit of NaOH/0.1 mol of NaOH = 0.09 lit or 90 ml.
What does the word neutralize mean?Definition of neutralizing
transitive verb. 1: to make it chemically neutral. 2a: to counteract the activity or effect of making ineffective propaganda that is difficult to neutralize. b: kill, destroy.
Learn more about neutralizing at
https://brainly.com/question/23008798
#SPJ2
Related Questions
1. Calculate the density of an object that is has a mass of 24 grams and a volume of 6 cm cubed
Answers
Answer:
4g/cm cubed
Explanation:
density=mass/volume
d=24/6
d=4
A solution of HF is titraited with a 0.150M NaOH solution. The pH at the half equivalence point is ? The Ka of HF I 0.00068.
Answers
Answer:
don't know00000⁰0000000
Chemistry help!
How much 1.50 M H3PO4, in mL, would you need to add to 50.00 mL of 3.50 M Ca(OH)2 in order to neutralize the solution?
_____ of mL of H3PO4
Answers
Answer:
Use the formula below
Explanation:
use the moles ratio for this by writing down the reaction and balancing the equation
What is the osmotic pressure of a solution made by dissolving 35.0 g of glucose, C6H12O6, in enough water to form 800.0 mL of solution at 11.0 ∘C ?
Answers
Answer:
Osmotic pressure, a colligative property can be determined from
π = iMRT
π = osmotic pressure in atm
i = van't Hoff factor = 1 for glucose, a non electrolyte
M = molarity = 30.0 g x 1 mol/180 g x 1/0.650 L = 0.2564 M
R = gas constant = 0.0821 Latm/Kmol
T = temperature Kelvin = 14.0º + 273 = 287K
Explanation:
What is the concentration of H+ in a 2.5 M HCl solution?
Answers
Answer:
The concentration of H⁺ in a 2.5 M HCl solution is 2.5 M
Explanation:
As HCl is a strong acid and hence a strong electrolyte, it will dissociate as
HCl ⟶ H⁺ + Cl⁻
So, The concentration of H⁺ will be 2.5 M (same as HCl)
Thus, The concentration of H⁺ in a 2.5 M HCl solution is 2.5 M
-TheUnknownScientist 72
A cars is moving at 12 m/s and has a mass of 600 kg. What is the kinetic energy for the car? (Formula:KE= 1/2 MV2) 36,300J 43,200J 72,600J 86,400J
Answers
Explanation:
ano po topic nyo para maayos sagut
First make sure everything has the correct unit, in this case the unit all are S.I Units. Then, just compute the data into the Kinetic Energy formula. Its direct.
0.500 mol aluminium hydroxide, Al(OH)3 reacts with 0.500 mol sulphuric acid, H2SO4 to produce aluminium sulphate and water.
a) Write the balanced equation for the reaction.
b) Which reactant is limiting reactant?
c) How many moles of excess reactant is used in the experiment?
d)Determine how many moles of aluminium sulphates was obtained if the percentage yield of aluminium sulphate during the experiment is 77%. [9 marks]
Answers
The number of moles of excess reactant is used in the experiment is 0.33 moles. The number of moles of aluminium sulphates was obtained 0.129 moles if the percentage yield is 77%.
2Al(OH)3(aq) + 3H2SO4(aq) -----> Al2(SO4)3(aq) + 6H2O(l)
Number of moles of Al(OH)3 = 0.500 mol
Number of moles of H2SO4 = 0.500 mol
We have to determine the limiting reactant as follows;
2 moles of Al(OH)3 reacts with 3 moles of H2SO4
0.500 moles of Al(OH)3 reacts with 0.500 moles × 3 moles/2 moles
= 0.75 moles of H2SO4.
This means that H2SO4 is limiting reactant
Since 3 moles of H2SO4 reacts with 2 moles of Al(OH)3
0.500 moles of H2SO4 reacts with 0.500 × 2 moles /3 moles
= 0.33 moles
Only 0.33 moles of excess reactant was used in the experiment.
3 moles of H2SO4 yields 1 mole of Al2(SO4)3
0.500 moles of H2SO4 yields 0.500 moles × 1 mole/3 moles = 0.167 moles
Theoretical yield of Al2(SO4)3 = 0.167 moles
% yield = actual yield/Theoretical yield × 100/1
Actual yield = % yield × Theoretical yield /100
Actual yield = 77 × 0.167/100
Actual yield = 0.129 moles
Learn more: https://brainly.com/question/11155928
If there is no external force on a moving object, it will
A keep moving with constant velocity.
B gradually slow down until it stops.
c gradually speed up.
D maintain the same state of motion.
Estop moving
Answers
Answer:
B
Explanation:
B is the answerrrrr i think sooo
How much do 3.01 x 1023 atoms of Helium weigh?
Answers
Answer:
4.0 grams
Explanation:
I hope that helped!!
How many mols in 22.45g of water?
Answers
Answer:
1.247mol
Explanation:
moles=mass/molar mass
molar mass of water = 1+1+16=18
mass = 22.45
22.45÷18
= 1.247 moles of water
Answer:
Explanation:
Explanation
Periodic tables vary in how many places of sig digits they show. I always use approximate values which means that you will have to redo the question using your values
Water (1 mole)
2 * H = 1.01 * 2 = 2.02
1 * O = 16 * 1 = 16.00
Mass 1 mole = 18.02
Moles water
given mass = 22.45
molar mass = 18.02
moles = given mass/ molar mass
moles = 22.45 / 18.02
moles = 1.246 moles
Genes that confer resistance to antibiotics provide a selective advantage to organisms that are exposed to antibiotics. true or false
Answers
Answer:
True
Genes providing resistance to antibiotics will provide an organism protection against the antibiotics, which are used to kill it, therefore it is indeed an advantage for their survival
Karl likes to use cruise control when he drives on
the highway. After setting cruise control at 33.53
m/s (75 mph). At this speed, how long would it
take Karl to travel 8 kilometers?
Answers
Answer:
3.96 MINUTES
Explanation:
Karl likes to use cruise control when he drives on
the highway. After setting cruise control at 33.53
m/s (75 mph). At this speed, how long would it
take Karl to travel 8 kilometers?
VELOCITY = DISTANCE/TIME
OR
V=D/T
SO
VT=D
SO
T=D/V
THE DISTANCE IS 8 KM
THE VELOCITY IS 75 MPH
THERE ARE 1.61 KM PER MILE
SO
75M[H =
75 X 1.61 KM/H =
121 KM/HR
T=D/V
T=8/121 =0.066 HOUR =
0.066 X 60 MINUTES =
3.96 MINUTES
CHECK
75 MPH =
(75 X 1.61) KM/60 MINUTES =
120,75 KM/60 MINUTES=
2.01 KM/MINUTE
to travel 8 K,M WILL TAKE
8/2.01 = 3.98 minutes
What is happening when scientists use their five senses to learn new
information?
A. Drawing a conclusion
B. Forming a hypothesis
C. Making observations
C
D. Making predictions
VIOUS
Answers
Answer:
A, drawing a conclusion
Explanation:
Can all alkyl halides react with water to give alcohols?
Answers
Not all acid-catalyzed conversions of alcohols to alkyl halides proceed through the formation of carbocations. Primary alcohols and methanol react to form alkyl halides under acidic conditions by an SN2 mechanism.
Not all acid-catalyzed conversions of alcohols to alkyl halides proceed through the formation of carbocations. Primary alcohols and methanol react to form alkyl halides under acidic conditions by an SN2 mechanism.
In these reactions the function of the acid is to produce a protonated alcohol. The halide ion then displaces a molecule of water (a good leaving group) from carbon; this produces an alkyl halide:
Again, acid is required. Although halide ions (particularly iodide and bromide ions) are strong nucleophiles, they are not strong enough to carry out substitution reactions with alcohols themselves. Direct displacement of the hydroxyl group does not occur because the leaving group would have to be a strongly basic hydroxide ion:
We can see now why the reactions of alcohols with hydrogen halides are acid-promoted.
Carbocation rearrangements are extremely common in organic chemistry reactions are are defined as the movement of a carbocation from an unstable state to a more stable state through the use of various structural reorganizational "shifts" within the molecule. Once the carbocation has shifted over to a different carbon, we can say that there is a structural isomer of the initial molecule. However, this phenomenon is not as simple as it sounds.
- BRAINLIEST answerer
Um Is it in third period and has three electrons in its highest P orbitals
Answers
Answer:
Shut yo musty dusty ah up zaddy
Explanation:
come here big mami
Each element can be indentified by the number of _______ found in its nucleus, which also equals the elements _______ _______.
Answers
Answer:
Protons, Atomic number
What is the difference between speed and velocity?
Answers
Answer:
Speed is how far something goes in a unit of time.
Velocity is the same as speed but with direction.
Explanation:
if n=3, what are the quantam numbers l and m
Answers
Answer:
1=n yan ang alam heheheheh sorry kong mali
0.500 mol aluminium hydroxide, Al(OH)3 reacts with 0.500 mol sulphuric acid, H2SO4 to produce aluminium sulphate and water.
a) Write the balanced equation for the reaction.
b) Which reactant is limiting reactant?
c) How many moles of excess reactant is used in the experiment?
d)Determine how many moles of aluminium sulphates was obtained if the percentage yield of aluminium sulphate during the experiment is 77%.
[9 marks]
Answers
a) The balanced equation for the reaction would be as follows:
[tex]2 Al(OH)_3 + 3 H_2SO_4 ---> Al_2(SO_4)_3 + 6 H_2O[/tex]
b) The mole ratio of aluminum hydroxide to sulfuric acid is 2:3. This means that every 1 mole of the aluminum hydroxide would require 1.5 moles of sulfuric acid.
0.5 mole aluminum hydroxide would require:
0.5 x 3/2 = 0.75 moles of sulfuric acid.
But only 0.500 moles of sulfuric acid is present. Thus, the limiting reagent is sulfuric acid.
c) With 0.5 moles sulfuric acid, the mole of aluminum hydroxide required would be:
0.5 x 2/3 = 0.33
Excess moles of aluminum hydroxide = 0.5 - 0.33
= 0.17 moles
d) The mole ratio of sulfuric acid to aluminum sulfate produced is 3:1. With 0.5 moles sulfuric acid, the mole of aluminum sulfate produced would be:
0.5 x 1/3 = 0.17 moles
But the percentage yield is 77%
77/100 x 0.17 = 0.13 moles
Thus, the moles of aluminum sulfate that would be obtained with a percentage yield of 77% would be 0.13 moles.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
I need help wit this
Answers
#1
[tex]\\ \sf\longmapsto2 Ca+O_2\longrightarrow 2CaO[/tex]
Balanced
#2
[tex]\\ \sf\longmapsto N_2+3H_2\longrightarrow 2NH_3[/tex]
Balanced
#3
[tex]\\ \sf\longmapsto 2Cu_2O+C\longrightarrow 4Cu+CO_2[/tex]
Balanced
#4
[tex]\\ \sf\longmapsto H_2O_2\longrightarrow H_2O+O_2[/tex]
Already balanced
How many particles are in 3.5 g of P
Answers
Explanation:
Hence an atom is made up of three particles called electrons, protons and neutrons and 1 mol exactly contains 6.02214076×1023 atoms or particles. Thus 2.11×1024 atoms are present in 3.5 mol of arsenic.
In which substance are the electrostatic forces between molecules the strongest?
(1 point)
O acetone
O propane
turpentine
glycerin
Answers
The Whole Electrical Bonding Investigation Plan Quick check
1) B. boiling point, surface tension, vapor pressure
2) A. glycerin
3) C. the temperature at which additional heat energy causes the substance to change from a liquid to a gas
4) D. Heat each substance in liquid form to its boiling point. Measure the temperature of each substance
5) A. A liquid boils when the vapor pressure equals the atmospheric pressure.
The substance with the strongest electrostatic force has been Glycerin.
The boiling point has been the temperature required for the conversion of the liquid phase to the gaseous phase. The boiling point has been dependent on the intermolecular forces between the molecule.
The molecule with the higher interactions have a higher boiling point, and the molecules with the weaker interaction forces have a lower boiling point.
Among the given compounds, Glycerin has been the compound with the highest boiling point, thus the interactions within the glycerin molecules have been the greatest.
For more information about electrostatic interaction, refer to the link:
https://brainly.com/question/13555353
Giving brainly for correct answer! :)
Answers
Answer: I think its in order, not really sure. First answer on top. Next answer on the left and the Last answer on the right.
Which procedure would produce the best data for comparing the electrostatic forces between the molecules of different
substances? (1 point)
O Heat each substance in solid form for the same amount of time. Measure the temperature of each substand
O Heat each substance in liquid form to its boiling point. Measure the temperature of each substance
O Heat each substance in liquid form for the same amount of time. Measure the temperature of each substand
Heat each substance in solid form to its melting point. Measure the quantity of each substance that has
melted
Answers
The Whole Electrical Bonding Investigation Plan Quick check
1) B. boiling point, surface tension, vapor pressure
2) A. glycerin
3) C. the temperature at which additional heat energy causes the substance to change from a liquid to a gas
4) D. Heat each substance in liquid form to its boiling point. Measure the temperature of each substance
5) A. A liquid boils when the vapor pressure equals the atmospheric pressure.
Statement that explains the procedure would give the best data when making comparism of electrostatic forces that exist between the molecules of different substance is C: Heat each substance in liquid form for the same amount of time. Measure the temperature of each substand.
Electrostatic force can be regarded as attractive or repulsive forces that exist between particles, and this as a result of their electric charges. When making comparisons about electrostatic forces that exist between the molecules of different substance. Then the substance has to be heated in their liquid form with sane time period , then followed by measurements of the temperature of each stand.Therefore, option C is correct.
Learn more at:
https://brainly.com/question/9774180?referrer=searchResults
Which BEST explains why the Earth has layers?
A.The Earth's layers formed because the heaviest materials (like iron and nickel) float on top of the lighter materials that make up the frost.
B.The Earth's layers formed because the heaviest materials (like iron and nickel) sink below the lighter materials that make up the crust.
Answers
Answer:
B
Explanation:
I know im right I forgot some of the lessons cause this was still in grade 3 now Im grade 6....
All the participants in the Genius Dog Challenge are
border collies, which some experts think are the ____
breed of dog. (This was for chemistry class so dont ask why its under chemistry)
Answers
All the participants in the Genius Dog Challenge are Border Collies, which some experts believe to be the intelligent breed of dog.
Border Collie is the name of a breed of dog that is characterized by:
It arose on the border between Scotland and England.Its main use is shepherd dog.It is a dog considered one of the most intelligent and obedient.Border Collies have physical characteristics such as:
Medium sizeCoat: double coat of thick hair that sheds often.Colors: most common are black and white.Learn more in: https://brainly.com/question/18670592
Which candle burned the longest time why
Answers
Answer:
The one that burned longer because it burned longer
Explanation:
Why: slowest due to the hardness of the wax and the high temperature needed to melt the wax
How many moles of NO₂ would be required to produce 5.73 moles of HNO₃ in the presence of excess water in the following chemical reaction?
3 NO₂(g) + H₂O (l) → 2 HNO₃(g) + NO(g)
Answers
Answer:
8.595 mol NO2
Explanation:
5.73 mol HNO3 * [tex](\frac{3 mol NO2}{2 mol HNO3})[/tex] = 8.595 mol NO2
What best describes the transition from gas to liquid
Answers
It's condensation in which gas particles have a higher kinetic energy..
how many atoms of carbon atoms are in the reactant
Answers
Answer:
8
Explanation:
There are 8 carbon atoms in the reactants' side, because you multiply the 2 in front of C4H10 and the 4 under the C atom, and that gives you 8. So, 8 carbon atoms.
