Certain rifles can fire a bullet with a speed of 950 m/s just as it leaves the muzzle (this speed is called the muzzle velocity). The muzzle is 75.0 cm long and the bullet is accelerated uniformly from rest within it. What is the acceleration (in {g}'s) of the bullet in the muzzle? If, when this rifle is fired vertically, the bullet reaches a maximum height {H}, what would be the maximum height (in terms of H) for a new rifle that produced half the muzzle velocity of this one?

Answer:

B = 4.51×10⁻⁵ T

Explanation:

Given that,

The average magnetic field strength of the Earth is 0.0000451 T.

We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :

N=a×bⁿ

Where

n is any integer and a is a real no

So,

0.0000451 = 4.51×10⁻⁵ T

So, the required answer is equal to 4.51×10⁻⁵ T.

Answer:

Explanation:

since it is connected in parallel combination

use this formula

[tex]\frac{1}{R} = \frac{1}{R1} + \frac{1}{R2}[/tex]

[tex]\frac{1}{R} = \frac{1}{2} + \frac{1}{4}[/tex]

[tex]\frac{1}{R} = \frac{4+2}{2}[/tex]

[tex]\frac{1}{R} = \frac{6}{2}[/tex]

[tex]\frac{1}{R} = 3[/tex] ohm

therefore resistence = 3 ohm

then we should find power

P = VI

P = 12*3

P = 24 watt

now to find current use formula power = current * voltage

24 = current * 12

24/12 = current

2 = current

therefore current is 2 ampere (A).

to find potential difference (emf) use formula

V = IR

V = current * resistence

V = 2 * 3

V = 6 volt .

therefore potential difference is 6 volt.

Answer:

below

Explanation:

Part A) This engine works  per cycle is 254.9 J.

Part B) The thermal efficiency is  23.42%

The thermal efficiency of any heat engine is represented in percentage of heat energy converted into work.

For isothermal expansion, work done is

W₁ =nRT₁ x ln(V₂/V₁)

W₁ = 0.1 x 8.314 x 800 x ln(5000/3000)

W₁ = 339.8 J =Q₁

For isochoric cooling ,

W₂ =0

Q₂ =nCvdT = 0.1 x 3R/2 x (T₂-T₁)

Q₂ = -748.3 J

For isothermal compression,

W₃ =nRT₂ ln (V₄/V₃)

W₃  = 0.1 x 8.314 x 200 x ln(3000/5000)

W₃ = -84.9J

For isochoric heating

W₄ =0

Q₄ =nCvdT = 0.1 x 3R/2 x (800-200)

Q₄  = -748.3 J

Total work done in all the process W = W₁ +W₂ +W₃ +W₄

W =254.9 J

Thus, the work done is 254.9 J

Thermal efficiency = Work done/Heat taken

η = W/ Q₁ +Q₄

η = [254.9 / 339.8 +748.3 ] x 100 %

η = 0.2342 x 100 %

η = 23.42%

Thus, the thermal efficiency is 23.42%

Learn more about thermal efficiency.

https://brainly.com/question/13039990

#SPJ2

'

Answer: Members of the Flat Earth Society claim to believe the Earth is flat. Walking around on the planet's surface, it looks and feels flat, so they deem all evidence to the contrary, such as satellite photos of Earth as a sphere, to be fabrications of a "round Earth conspiracy" orchestrated by NASA and other government agencies.

♛ Mark me as Brainliest if I’m right

Answer:

2.86×10⁻¹⁸ seconds

Explanation:

Applying,

P = VI................ Equation 1

Where P = Power, V = Voltage, I = Current.

make I the subject of the equation

I = P/V................ Equation 2

From the question,

Given: P = 0.414 W, V = 1.50 V

Substitute into equation 2

I = 0.414/1.50

I = 0.276 A

Also,

Q = It............... Equation 3

Where Q = amount of charge, t = time

make t the subject of the equation

t = Q/I.................. Equation 4

From the question,

4.931020 electrons has a charge of (4.931020×1.6020×10⁻¹⁹) coulombs

Q = 7.899×10⁻¹⁹ C

Substitute these value into equation 4

t =  7.899×10⁻¹⁹/0.276

t = 2.86×10⁻¹⁸ seconds

Answer:

450N

Explanation:

weight= m*g

weight=45*10

weight=450N

Explanation:

the answer is in the above image

(a) The maximum voltage V is  190 Volts.

(b) The rms voltage V is 95√2 Volts.

(c) The rms current in Amperes is  7.9 A.

(d) The peak current Amperes is  11.18 A.

(e)The current when t = 0.0045 s is 7.26 A.

The current is the stream of charges which flow inside the conductors when connected across the end of voltage.

Given is an AC source is connected across a 17.0 Ω resistor, the output voltage is given by Δv = (190 V)sin(50πt).

(a) From the given voltage equation, maximum voltage V is 190 Volts.

(b) rms voltage =Vmax/√2

Put the values, we get

Vrms = 190/√2 = 95√2 Volts

(c) rms current = Vrms/Resistance

Put the values, we get

Irms =  95√2 /17

Irms = 7.9 Amperes.

(d) peak current  =√2 Irms

Substitute the values, we get

Peak current = 7.9 √2 = 11.18 A

(e) The current when t = 0.0045 s is written as

I =  (190 V)sin(50πt)/R

Substitute the values, we have

I =  (190 )sin(50π x0.0045)/17

I = 7.26 A.

Learn more about current.

brainly.com/question/10677063

#SPJ2

Answer:

16.33°C

Explanation:

Applying,

Heat lost by copper = heat gained by water

cm(t₁-t₃) = c'm'(t₃-t₂).............. Equation 1

Where c = specific heat capacity of copper, m = mass of copper, c' = specific heat capacity of water, m' = mass of water, t₁ = initial temperature of copper, t₂ = initial temperature of water, t₃ = final equilibrium temperature.

From the question,

Given: m = 50 kg, t₁ = 140°C, m' = 90 L = 90 kg, t₂ = 10°C

Constant: c = 385  J/kg°C, c' = 4200J/kg°C

Substitute these values into equation 1

50(385)(140-t₃) = 90(4200)(t₃-10)

(140-t₃) = 378000(t₃-10)/19250

(140-t₃) = 19.64(t₃-10)

140-t₃ = 19.64t₃-196.6

19.64t₃+t₃ = 196.4+140

20.64t₃ = 336,4

t₃ = 336.4/20.6

t₃ = 16.33°C

Answer:

the correct answer is B

Explanation:

Let's propose the solution of the problem, for this we form a system formed by the two cars, so that the forces during the collision are internal, the momentum is conserved

instantly starts. Before the crash

         p₀ = M v +0

final instant. After the crash

        m_f = (M + M) v_f

the moment is preserved

        p₀ = p_f

        M v = 2 M v_f

        v_f = v / 2

let's look for kinetic energy

before the crash

       K₀ = ½ M v²

after the crash

       K_f = ½ 2M (v_f)²

       K_f = ½ 2M (v/2)²

       K_f = (½ M v²) ½

       K_f = K₀ / 2

therefore the correct answer is B

Answer:

because density of iron is more than that of water but less then that of Mercury

hope it's helpful

Answer:

The wave speed is 2.8 m.

Explanation:

Wavelength = 1.4 m

frequency, f = 2 Hz

the wave speed is given by

wave speed = wavelength x frequency

wave speed = 1.4 x 2 = 2.8 m

option (D) is correct.  

Answer:

3.86×10⁶ Newton/coulombs

Explaination:

Applying,

E = F/q....................... Equation 1

Where E = Electric Field, F  = Force, q = charge.

From the question,

Given: F = 5.4×10⁻¹ N, q = -1.4×10⁻⁷ coulombs

Substitute these values into equation 1

E = 5.4×10⁻¹/ -1.4×10⁻⁷

E = -3.86×10⁶ Newtons/coulombs

Hence the magnitude of the electric field created by the

negative test charge is 3.86×10⁶ Newton/coulombs

Answer:

Total probability = 3/8

Explanation:

Below is the calculation:

Number of molecules in the container = 3

The probability of one molecule in the left half, P = 3 / 2 = 1.5 or 1/2

The probability of second molecule in the left half, P1 = (3/4)

Total probability = P x P1

Total probability = (1/2) x (3/4)

Total probability = 3/8

Answer:

B) True. By changing the length get a different period and with a graph you can find the best value of the gravity pull

Explanation:

The student is reacting a simple pendulum experiment where he can determine the value of the relationship of gravity with the expression

              T = 2π [tex]\sqrt{\frac{L}{g} }[/tex]

let's analyze each statement

A) False. The mass is not a paramer of the period expression

B) True. By changing the length get a different period and with a graph you can find the best value of the gravity pull

C) False. The angle while it is small does not influence the period

D) True. By changing the number of oscillations the period does not change, so you can get the value of the pull of gravity.

We can see that the expressions B and d are true, the most exact value is obtained using procedure B since the graphs allow to reduce the errors

Answer:

θ = 12.5 rotations

Explanation:

The number of rotations can be found by using the second equation of motion:

[tex]\theta = \omega_i t + \frac{1}{2}\alpha t^2\\\\[/tex]

where,

[tex]\theta[/tex] = angular displacement = ?

ωi = initial angular speed = 0 rad/s

t = time = 5 s

α = angular acceleration = 2π rad/s²

Therefore,

[tex]\theta = (0\ rad/s)(5\ s)+\frac{1}{2}(2\pi\ rad/s^2)(5\ s)^2\\\\\theta = 78.54\ rad[/tex]

converting it to no. or rotations:

[tex]\theta = (78.54\ rad)(\frac{1\ rotation}{2\pi\ rad})[/tex]

θ = 12.5 rotations

Answer:

Economists, I guess.

Explanation:

Answer:

stress = 1.225 x 10^8 N/m^2

strain = 1/5

Young's modulus = 6.125 x 10^8 N/m^2

Explanation:

mass, m = 500 kg

length, L = 5 m

Area, A = 0.4 x 10^-4 m^2

Final length, L' = 6 m

extension, x = L'-L= 6 - 5 = 1 m

Stress is defined as force per unit area.

[tex]stress =\frac{Force}{Area}\\\\stress =\frac{500\times 9.8}{0.4\times 10^{-4}}\\\\stress = 1.225\times 10^8 N/m^2[/tex]

Strain is defined as the ratio of change in length to the original length.

[tex]strain =\frac{x}{L}\\\\strain = \frac{1}{5}[/tex]

Young's modulus is given by the ratio of stress to the strain.

[tex]Y = \frac{1.225 \times 10^8}{\frac{1}{5}}\\\\Y = 6.125\times 10^8 N/m^2[/tex]

1) (40 N) cos(30°) ≈ 34.6 N

2) (40 N) sin(30°) = 20 N

3) (65 kg) g = (65 kg) (9.80 m/s²) = 585 N

4) The net force on the sled acting in the vertical direction is made up of

• the sled's weight, 585 N, pointing downward

• the vertical component of the applied force, 20 N, pointing upward

• the normal force, with magnitude n, also pointing upward

The sled does not move up or down, so by Newton's second law,

∑ F = n + 20 N - 585 N = 0   ==>   n = 565 N

5) The net force in the horizontal direction consists of

• the horizontal component of the applied force, 34.6 N, acting in the direction the sled's movement (call this the positive direction)

• kinetic friction, with magnitude f, pointing in the opposite and negative direction

By Newton's second law,

∑ F = 34.6 N - f = 0   ==>   f ≈ 34.6 N

Now if µ is the coefficient of kinetic friction, then

f = µn   ==>   µ = f/n = (34.6 N) / (565 N) ≈ 0.0613

The component of the force is the effective part of that force in that direction.

The component of the force is the effective part of that force in that direction.

1) The horizontal component of a force = 40 N cos 30 degrees = 34.6 N

2) The vertical component of the force = 40 N sin 30 degrees = 20 N

3) The magnitude of the gravitational force = mg cos 30 degrees  = 65 Kg * 9.8 m/s^2 * cos 30 degrees = 551.7 N

4) The normal force = 551.7 N

5) The coefficient of friction = F/R =  40 N /551.7 N = 0.07

Learn more about component of a force:https://brainly.com/question/15529350

#SPJ6

Answer:

hey. i dont know what you tryna say but if u replying to someone else, you should use the comments section. in that way you won't lose points.

Answer:

To produce a single sugar molecule a plant must use a molecule of water (H2O) and carbon dioxide (CO2) and sunlight. To get 4 molecules, you simple use 4 molecules of water and 4 molecules of carbon dioxide

Answer:

17280 J and 1080 J

Explanation:

Given :

R= 40 ohm

I=1.2A

t= 5 min=60×5=300 sec

Now,

Total energy can be calculated as:

[tex]E=I^{2} Rt\\E=(1.2)^{2} *40*300\\E=17280 J[/tex]

Now,

V=12V

R=40 Ohm

[tex]E=\frac{V^{2} }{R} *t\\E=\frac{(12)^{2} }{40} *300\\E=1080 J[/tex]

Total energy  is 17280 J and 1080 J

Explanation:

The torque [tex]\tau[/tex] is given by

[tex]\tau=Fd = (65\:\text{lbs})(\frac{8}{12}\:\text{ft}) = 43.3\:\text{lbs-ft}[/tex]

Answer:

x = 4.45 * 10 ^22  Note. Technically, this should be rounded to 4.5 * 10^22. There are only 2 sig digits.

Explanation:

You have to assume that the coin is pure copper, which I doubt.  What a coin is actually made of  depends on when it was minted. But for the sake of this question, we'll assume coins are pure copper.

Copper has an atomic mass of 63.546 grams / mol

So 4.7 g of copper = 4.7 / 63.545 mol

We have 0.07396 mol of copper

1 mol of anything = 6.02 * 10^23 atoms (in this case).

0.07396 mol        = x

Cross Multiply

1 * x = 0.07396 * 6.02 * 10^23

x = 4.45 * 10 ^22  atoms of copper

Answer:

D and E

Ionic bonds are formed between metals and non-metals and both of those are metals

Answer:

His height is 6.66 feet or 79.92 inches.

Explanation:

Given that,

An AAMU basketball player is 2.03 meters tall.

Let h is the height.

We know that,

1 m = 3.28 feet

So,

2.03 m = 6.66 feet

Also,

1 m = 39.37 inches

2.03 m = 79.92 inches

Hence, this is the required solution.

Answer:

air  f = 4.6527 10¹⁴ Hz

water f = 3.4914 10¹⁴ Hz

glass f = 3.1027 10¹⁴ Hz

Explanation:

The refractive index of a material is given by

         n = c / v

where c is the speed of light in a vacuum c = 3 108 m / s and v is the speed of light in the material medium.

the speed of the wave is

         v = λ f

we substitute

         c / n = λ f

          f = [tex]\frac{c}{n \ \lambda}[/tex]

The refractive indices are

air 1,00029

water 1.3330

glass 1.5

let's calculate the frequencies

vaccum

         f = 3 10⁸ / 1 644.6 10⁻⁹

         f = 4.6540 10¹⁴ Hz

air

         f = 3 10⁸ / 1,00029 644.6 10⁻⁹

         f = 4.6527 10¹⁴ Hz

Water

         f = 3 10⁸ / 1.333 644.6 10⁻⁹

         f = 3.4914 10¹⁴ Hz

glass

        f = 3 10 ^ 8 / 1.5 644.6 10⁻⁹

        f = 3.1027 10¹⁴ Hz