can you answer with working out ​

Answer:

the uses of exothermic reactions are:

1) lighting of stove

2) self heating cans

3) hand warmers

4) in some case exothermic process can be used to cook food such as rice  (by adding calcium oxide to water heat is evolved and it helps to cook food )

Explanation:

hope this helps you pls mark me as brainilst

Answer:

milk and starch solution are the colloids, hence these will show the tyndall effect

Answer:

milk and starch solution

Explanation:

Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.

Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.

Answer:

s orbital

Explanation:

it has the lowest energy because

Paulis law state that orbitals with lower energy must be fill first before that of higher energy

and the s orbital is filled first

Answer:

Acetone is captured and cooled.

Explanation:

The boiling point of acetone is lower than that of water, so it will vaporise before water. Then acetone will be captured and cooled to separate it from its mixture with water.

The statement which is correct about distilling a mixture of acetone and water is as follows:

Thus, the correct option is C.

Distillation may be defined as a procedure that generally involves the conversion of a liquid into a vapor that is eventually condensed back to liquid form. With the help of this process, the separation of components or substances from a liquid mixture by using selective boiling and condensation occurs.

Acetone has the lowest boiling point as compared to water. So, it boils faster than that water and vaporizes before water. After the termination of this process, the acetone will be predominantly captured and cooled to separate it from its mixture with water.

Therefore, the correct option for this question is C.

To learn more about the Boiling point of acetone, refer to the link:

https://brainly.com/question/17467265

#SPJ2

Answer:

The answer is in the explanation.

Explanation:

The KHP is an acid used as standard in titrations to find concentration of bases as NaOH.

The reaction that explain this use is:

KHP + NaOH → KNaP + H2O

where 1 mole of KHP reacts per mole of NaOH

That means, at equivalence point of a titration in which titrant is NaOH, the moles of KHP = Moles of NaOH added

With the moles of KHP = Moles of NaOH and the volume used by titrant we can find the molar concentration of NaOH.

The moles of KHP are obtained from the volume and the concentration as follows:

Volume(L)*Concentration (Molarity,M) = moles of KHP

If the concentration is more or less than 0.100M, the moles will be higher or lower. For that reason, we need to know the concentration of KHP but is not necessary to be 0.100M.

Answer:

Is water the only liquid? If not, name 5 more

Water, ethanol, household bleach, blood, paint, milk, gasoline, mineral oil, acetone and butyl alcohol are examples of liquids. Liquids' properties allow them to flow or be poured easily into containers, lava

water is not the only liquid.

Answer:

apple juice, milk, smoothie, blood, urine

Answer:

Hi! hopefully this helps you

Explanation:

You can make a buffer solution for a specific pH (potential of hydrogen) by mixing together a weak acid like acetic acid HC2H3O2 with a salt that contains the conjugate base like sodium acetate NaC2H3O2. A neutralization reaction would occur as you are mixing a weak acid and a strong base.

When you add the base to an acidic solution, the solution becomes less acidic and moves toward the middle of the pH scale. Aka neutralization

Hope this helps! best of luck <3

Answer:

im a just achild

Explanation:

Answer:

c

Explanation:

0.5dm³

follow me if you want

Answer:

11.92 Liters O₂(g) at STP

Explanation:

For most stoichiometry problems, if one will convert all given data into moles, solve by rxn ratios, then finish by converting to needed dimensions to complete problem.

2Pb(NO₃)₂ => 2PbO + 4NO₂ + O₂

Given 237.5 grams PbO formed in reaction = 237.5 g/223.2 g/mole = 1.064 mole PbO

From equation ratios, moles O₂ formed = 1/2(moles PbO) = 1/2(1.064 moles O₂) = 0.532 mole O₂

0.532 mole O₂ = 0.532 mole x 22.4  liters/mole at STP = 11.91756272 liters (calculator answer) ≅ 11.92 liters O₂ at STP (4 sig.figs. based on given 237.5g PbO)

cubic unit cell is the smallest repeated unit which have all angles equal to 90 and all have edge lengths equal

It is the type of the Unit cell which is having all angles equal to 90 and all sides equal to each other

it's is a unit cell with cubic structure

The products formed during electrolysis of concentrated sodium chloride solution are SODIUM HYDROXIDE and HYDROGEN GAS.

ELECTROLYSIS is the process by which electrolytes allows electric current to pass through it and is decomposed on the process.

CHLORINE is an element which can be produced industrially through the process of electrolysis of brine (concentrated sodium chloride solution). When sodium chloride is dissolved in water, it's ions separate and are capable of conducting electricity.

The products formed during this process includes:

CHLORINE: this is released at the positive electrode during electrolysis. It is used for the following purposes:

SODIUM HYDROXIDE: this remains in the solution during electrolysis. It is used for the following:

HYDROGEN GAS:this is released at the negative electrode during electrolysis. this is used for the following:

Therefore other products during electrolysis of concentrated sodium chloride solution are SODIUM HYDROXIDE and HYDROGEN GAS.

learn more here:

https://brainly.com/question/13123512

Answer:

The Noble Gases have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.

Hope this helps!

Answer:

Explanation:

48000 minutes [ 1 hour  / 60 min ] 1 day / 24 hours ] [365 days / year]

48000 * [ 1/(60 * 24 * 365)]

48000 * [1 / 525600]

There are 0.0930954years in 48000 minutes

Answer:

B.electrostatic repulsion by gold nuclei

Explanation:

According to Rutherford's experiment, a thin gold foil was bombarded with alpha particles. Some of the particles passed through the foil undeviated, some were scattered through large angles while some bounced backwards.

It follows that the particles that bounced backwards must have encountered a massive particle of like charge.

The atom is composed of a nucleus which contains positively charged particles. Some of the alpha particles which are positively charged particles bounced back when they encountered the positively charged particles in the nucleus.

Answer: The correct option is B (electrostatic repulsion by gold nuclei).

Explanation:

In the Rutherford's experiment, he used positively charged particles called alpha particles to bombard an atom in order to find out what is inside the atom. Together with two other scientists, Geiger and Marsden, they used a narrow beam of alpha particles emitted from a radioactive source to bombard a thin gold foil. The scattering of the particles from the gold foil was detected by a movable zinc sulphide screen which could be rotated to various positions around the foil.

Each time an alpha particle hit the screen, a visible flash of light or scintillation was produced. This was observed by a microscope attached to the screen. It was then observed that some of the particles followed a straight path through the gold foil while a few where scattered in a backward direction. This was as a result of electrostatic repulsion by gold nuclei which occurs due to the greater part of the mass of the atom was concentrated in a minute nucleus with positive charge.

Answer:

1. 3-methylpentane

2. 2-bromo-3-chloropentane

3. 2,2,4-trimethylpentane

Explanation:

1. CH3CH2CH(CH3)CH2CH3.

Methyl group is in the third carbon atom in the long chain. The organic compound has five(5) carbon atoms thus it is named as pentane.

Therefore the name of the compound is

3-methylpentane

2. CH3CH(Br)CH(Cl)CH2CH3

The compound has Chlorine and Bromine in the carbon chain. Chlorine is given as chloro-, Bromine is given as bromo, depending on the position in the carbon chain. Bromine is located in 2 carbon atom and chlorine is in third(3) carbon atom in the long chain. The long chain has five carbon atoms thus pentane.

Naming of the compound we begin with the on lowest in the alphabet. The name of the organic compound is therefore;

2-bromo-3-chloropentane

3. CH3CH(CH3)3CH(CH3)CH2CH3

In this long chained organic compound, methyl-group is found in 2,2 and 4th positions. Since this is still pentane, naming the organic compounds, we start with the one with the lowest carbon. Therefore this becomes;

2,2,4-trimethylpentane

I hope this helps you to know how to name the organic compounds.

Answer:

chắc là câu B í

Explanation:

i) Be has a fully filled 2s level.

ii) This is because chlorine is larger than fluorine.

iii) Fluorine needs only one electron to attain the octet configuration.

Electron affinity is the ability of an electron to accept  gaseous electrons to yield gaseous ions with a negative charge.  

Electron affinity depends on the size of an atom. Larger atoms have a higher electron affinity because they are better able to accept electrons.

The drop between Li and Be is because the 2s orbital in Be is already fully filled while Li has incompletely filled 2s level. electrons do not easily go into the higher energy 2p level.

The higher peak of chlorine is because chlorine is larger than fluorine hence the electron affinity of fluorine is less than that of chlorine. The smaller the ion the lesser the electron affinity.

Fluorine has the highest electron affinity in period 2 because it needs only one electron to attain the octet structure.

https://brainly.com/question/11755303

Answer:

one atom of oxygen is not equal to oxygen

Answer:

337.5kPa ~ 338kPa

Explanation:

Using the ideal gas law PV=nRT we have the following definitions from the problem:

V(initial) = 20cm³

P(initial) = ?kPa

V(final) = 75cm³

P(final) = 90kPa

Since we know that the number of moles of the sample did not change, nor did the temperature, nor does the ideal gas constant (R) we can rewrite this equation to state:

P(initial)V(initial) = nRT =P(final)V(final) ~  P(initial)V(initial) = P(final)V(final)

Rearranging this equation as we are solving for the initial pressure we find that:

P(initial) = (P(final)V(final))/V(initial)

P(initial) = ((90kPa)(75cm³))/20cm³

P(initial) = 337.5kPa ~ 338kPA

Answer:

The answer is "Option i"

Explanation:

In this question, only option (i) is correct, and others were wrong which can be defined as follows:

In option (ii):

[tex]Na^+\ (aq)+Cl^- \ (aq) +Ag^+ \ (aq)+NO_3^- \ (aq) \to AgCl\ (s)+Na^+ \ (aq)+NO_3^-\ (aq) \\\\[/tex]

It is the complete ionic equation.

In option (iii):

[tex]CH_3OH\ (g)+O_2\ (g) \to CO_2\ (g)+H_2O\ (g)[/tex]

It is the combustion reaction but a not balanced equation.

In option (iv):

[tex]2H_2O\ (l) \to 2H_2\ (g)+O_2\ (g)[/tex]

It is the  decomposition equation.

In option (v):

[tex]H^+\ (aq) +OH^-\ (aq)\to H_2O\ (l)[/tex]

It is the complete ionic equation.

Answer:

The amount of acid rain caused by the burning of fossil fuels can be reduced by creating nitrogen oxides in the process of burning coal and other fossil fuels, some power plants are changing the way they burn coal. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power.

Answer:

It is based on testable and replicable evidence.

KMnO4 + H2O = MnO2 + O2 + KOH

Must click thanks and mark brainliest

Answer:

The label may instruct you to shake a liquid medicine before using so that the active ingredients are evenly distributed throughout it.

Explanation:

Answer:

maybe because if somehow the liquids get separated then shaking them up would mix them back to how they are suppose to be originally.

Explanation:

Answer:

53.9541 pound force...

Answer:

c2h4 (etthane........

bexcuse it has 6 bond of hydrogen

C₂H₄ molecules contains six bonding electrons. Therefore, option A is correct.

Chemical bonding is the process through which two or more atoms, molecules, or ions establish a chemical link to create a chemical compound. The atoms in the resultant molecule are held together by these chemical bonds.

Chemical bonds have three basic characteristics that must be taken into account: their strength, length, and polarity. The distribution of electrical charge among the atoms connected by a bond determines its polarity.

C₂H₄ molecules has six bonding electrons. This molecule is called as Ethylene. When bonding is done between two atoms, each atom shares a pair of electrons with each other.

Hence, for every one bond, two electrons are shared between two atoms

Thus, option A is correct.

To learn more about the bonding, follow the link;

https://brainly.com/question/10777799

#SPJ6

If I could change something in my previous science classes, it would have been the fact that I struggled in the question concerning exponents. It was simple one, but I don't know how I didn't understood that. For example, if there is a question with a calculation "xy²", then I would first multiply x and y, and then calculate the exponent. I did 3 of the questions wrong because of this, it was when I was in 7th grade. I wish I had not done this kind of silly mistake. I an in 10th grade and understand it well now, though.

Answer:

D- Release of dust during volcanic eruption

Explanation:

During major explosive eruptions huge amounts of volcanic gas, aerosol droplets, and ash are injected into the stratosphere. Injected ash falls rapidly from the stratosphere -- most of it is removed within several days to weeks -- and has little impact on climate change. But volcanic gases like sulfur dioxide can cause global cooling, while volcanic carbon dioxide, a greenhouse gas, has the potential to promote global warming.

answer:

a - decrease in the suns energy.

explanation:

although the other options do discuss climate, temperature, etc., the sun DIRECTLY influences the earth's climate and would most likely affect it on a larger scale. for example, warm and cold ocean currents would affect the temperature of the ocean and could touch bay cities or islands, but they would not dictate the overall climate of the earth :)

♡ hopefully my reply helped you come to an answer~ please keep in mind that my response is purely that... MY response! i still have lots to learn, so please correct/educate me if you have found otherwise ♡