Can someone plz help me?

SIZE

400

UNIT OF MEASURE

meters

BASED ON LANE

1

To begin, you must do Steps 1-3 to enter (or verify) the correct information for the track being used. Frequently-used values have been pre-entered in all three steps. Change them only if required.

Step 1. ENTER THE TRACK SIZE (i.e., the distance covered when completing one lap - normally in Lane 1) and select the unit of measure.

 most outdoor tracks are either 400 meters or 440 yards (4 laps to a mile)

 most indoor tracks are either 200 meters or 220 yards (8 laps to a mile)

See NOTE 3 for determining track size. Also note that a very small number of tracks use a lane other than Lane 1 to define the track size (see NOTE 4). If the size you entered is not based on Lane 1, select the lane number upon which the size is based.

Step 2. ENTER THE LANE WIDTH of lanes on the track (they should all be the same width). While the best tracks (IAAF, Olympic, etc.) have lanes that are 1.22m to 1.25m wide, most high school and college tracks have lane widths measured in inches (e.g., 42"). See NOTE 5 for information on how to measure lane width. LANE WIDTH

42

Step 3. IS THERE A RAISED CURB on the inside of Lane 1 (normally 2" - 2.5" high)? If there is, select "yes." If the inside edge of Lane 1 is defined only by a painted line, select "no." See NOTE 6 for further information about curbs.

no

Now that you have completed Steps 1 - 3, select a calculation section below, enter the requested parameter(s), and click on the "click here" calculation button for that section. After noting (or printing) the results, enter different parameters for the same calculation or proceed to another calculation section.

ANWERS: 42  

Answer:

Six times.

Step-by-step explanation:

Find the perimeter: 100+100+150+150= 500 m all the way around

3 km = 3000 m

3000 divided by 500 is 6 times.

Answer:

Step-by-step explanation:

[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]

Answer:

14 Sq ft

Step-by-step explanation:

9×9=81

5×5=25

81-25=56

56÷4=14

Answer:

(2, - 6 )

Step-by-step explanation:

Use the mid point formula and equate to each coordinate of the midpoint

with endpoints (x₁, y₁ ) and (x₂, y₂ ) then

midpoint = ( [tex]\frac{x_{1}+x_{2} }{2}[/tex] , [tex]\frac{y_{1}+y_{2} }{2}[/tex] )

let S = (x, y) , then

[tex]\frac{x+0}{2}[/tex] = 1 ( multiply both sides by 2 )

x = 2

and

[tex]\frac{y+2}{2}[/tex] = - 2 ( multiply both sides by 2 )

y + 2 = - 4 ( subtract 2 from both sides )

y = - 6

Then S (2, - 6 )

Answer:

256, 254

Step-by-step explanation:

The fraction that is equal to 0.375 is 3/8.

Hope this helps! :)

Answer:

Answer:

-2 + 4f

Step-by-step explanation:

6 - 8 + 6f - 2f​

2(3 - 4 + 3f -f)     [Distributive Property]

=> 2(-1 + 3f - f)

=> 2(-1 + 2f)

=> -2 + 4f

Answer:

4f-2

Step-by-step explan:

6-8+6f-2f

6-8+4f

4f-2

Answer:

16 labourers complete the construction

in 30 days

Step-by-step explanation:

mark me as a brainlist answer

Answer:

A constant you need to find when given what the equation is equal to.

Answer:

Here, 'd' is the variable of 2.

Answer:

Step-by-step explanation:

The opposite side (the one not connected to A) = 4

The hypotenuse is 5

The adjacent side needs to be found for the cosine and the tangent.

a^2 + b^2 = c^2

a = opposite side = 4

b = adjacent side = ?

c = hypotenuse = 5

4^2 + x^2 = 5^2

16 + x^2 = 25          

x^2 = 25 - 16

x^2 = 9

x = sqrt(9)

x = 3

cos(A) = adjacent / hypotenuse = 3/5

Tan(A) = opposite / adjacent = 4/3

cos(A) + tan(A) = 3/5 + 4/3

cos(A) + tan(A) = 9/15 + 20/15 = 29/15

Answer:182

Step-by-step explanation:

47+39+52+44 = 182

Answer:

Step-by-step explanation:

Time spend on doing homework = 47 + 39 + 52 + 44 = 182 minutes

                 = 182 ÷ 60 = 3 hours 2 minutes

Step-by-step explanation:

b/c -|9|

first we will out the number from absolut value

then it will give as -9

Answer:

So she earned 148 dollars and 50 cents or 148.5

Step-by-step explanation:

The shaded region of a circle formed by one line as shown in the image is called a segment.

Answer: segment

By looking at the dot graph, we can see that the single dot above 12 in the Stony Brook graph, means that the ecologist find that in one of the 42 places measured in the Stony Brooks lake, the nitrate concentration was 12 mg/L

To understand this, first I want to give a brief explanation of how these graphs work.

You know that the ecologist did study the Nitrate pollution at 42 places in two lakes.

Each of these 42 places is represented with a dot in the corresponding graph.  Now looking at the graph, the position of the dots represents the nitrate concentration (you can see it in the horizontal axis) on one of these 42 places (42 dots for 42 places).

So, having a single dot above 12 in the Stony Brook graph, means that the ecologist find that in one of the 42 places measured in the Stony Brooks lake, the nitrate concentration was of 12 mg/L

If you want to learn more, you can read:

https://brainly.com/question/16354226

Answer:

1/94

Step-by-step explanation:

2/188 = 1/94

Answer:

0.01063829787.

Step-by-step explanation:

Caculator.

Answer:

32

Step-by-step explanation:

3x+1=8x-24

25=5x

x=5

3 times 5 plus 1 is 16 and so the length is 32

comment section:

XM=MY because MN is segment bisector

XM=3x+1=3*5+1=16=MY and since XM+MY=XY 16+16=32

Answer:

A

Step-by-step explanation:

edge 2021

Answer:

It is A

Step-by-step explanation:

I got it right on the test Edge 2022.

Answer:

figure 1

3 + 3 + 3 + 1 + 1 + 1= 12 units

area is 3x1 + 1x1 + 3x1 = 7 sq units

figure 2

perimeter do the same as figure 1 and youll get

32 units i assume

area do the same as figure

then bueno

Answer:

[tex]x=14[/tex]

Step-by-step explanation:

If two values are inversely proportional, their product must be maintained. That way, if one value goes up, the other goes down by the same extent.

Therefore, if [tex](x-4)[/tex] and [tex](y+3)[/tex] vary inversely, their product will be the same for all values of [tex]x-4[/tex] and [tex]y+3[/tex].

Let [tex]x=8[/tex] and [tex]y=2[/tex] as given in the problem. Substitute values:

[tex](8-4)(2+3)=(4)(5)=20[/tex]

Hence, the maintained product is [tex]20[/tex].

Thus, we have the following equation:

[tex](x-4)(y+3)=20[/tex]

Substitute [tex]y=-1[/tex] to find the value of [tex]x[/tex] when [tex]y=-1[/tex]:

[tex](x-4)(-1+3)=20,\\(x-4)(2)=20,\\x-4=10,\\x=10+4=\boxed{14}[/tex]

Answer:

May be the ans is option C and A

Answer:

15

Brainliest, please!

Step-by-step explanation:

r = kp/(st)

p = 12, t = 2, s = 5, r = 18

18 = k(12)/(2)(5)

18 = 12k/10

12k = 180

k = 15

Answer:

n - 10

Step-by-step explanation:

10 is less than n so subtract 10 from n

Answer:

-12

Ydbzushsbsksjsbsksudjeke

Answer:

4.2

Step-by-step explanation:

d=sqrt[(x1-x2)^2+(y1-y2)^2]

d=sqrt[(5-8)^2+(-5+8)^2]

d=sqrt[(-3)^2+(3)^2]

d=sqrt[9+9]

sqrt18=4.24

25x² - 36x +9, when x = 2

(25 × 2)² - (36 × 2) + 9

50² - 72 + 9

2 500 - 72 + 9

using BODMAS

2 500 + 9 - 72

2 509 - 72

= 2 437

Answer:

Step-by-step explanation:

25(2)^2-36(2)+9

25(4)-72+9

100-72+9

28+9

37

Answer:

yeah, because it doesnt have a constant rate of change -  if it did, then it would be linear

Step-by-step explanation:

Answer:

4.2

Step-by-step explanation:

0.4+0.3=0.7

0.7x6=4.2

Answer:

4.2

Step-by-step explanation:

6(0.4+0.3)

=> 6(0.7)

=> 6 x 0.7

=> 4.2