Can someone help with this please

Answer:

I believe nitrogen would act as the solvent, I know this because there is a higher percentage of it than oxygen and other.

In the air composition provided, nitrogen is the solvent, while oxygen and the other gases are the solutes dissolved within the nitrogen solvent.

In a solution, the solute is the substance that is present in a smaller quantity and is dissolved in a larger quantity of another substance called the solvent. The solute may dissolve in the solvent to create a homogeneous mixture.

In the given case, air is a mixture of gases, and the major components are nitrogen (78%) and oxygen (21%), with a small percentage of other gases (1%). Here, nitrogen and oxygen are the solutes, and the remaining gases are also solutes, but in a smaller proportion.

The solvent is the component that dissolves the solute, and in the case of air, nitrogen is acting as the solvent. Nitrogen, being the most abundant gas in the mixture, forms the "base" or "carrier" for the other gases to be mixed within. Oxygen and the other gases dissolve or mix into nitrogen gas, creating a homogeneous mixture that we breathe.

Thus, in the air composition provided, nitrogen is the solvent, while oxygen and the other gases are the solutes dissolved within the nitrogen solvent.

Learn more about the solvents here:

https://brainly.com/question/11985826

#SPJ3

Answer:

C is the correct answer

Explanation:

most probably

Answer:

Chromium(III) Sulfite Cr2(SO3)3 Molecular Weight

Mg(ClO)2 - PubChem

Ni(NO3)2

Answer:

The answer is "Auger".

Explanation:

The Auger effect is an effect size when the vacancy of even an atom throughout the inner shell was complemented by the release of even an electron from the same atom. Whenever a central electron is lost, a higher energy level electron can drop into the void and release energy, which can be the result.

Answer:

0.00286

Explanation:

Hope this helps!

Answer:

0.00286

Explanation:

:)

Answer:

its D

Explanation:

Took the test

The specie whose concentration is plotted is D. The rate of reaction is how quickly or slowly hat a reaction proceeds.

The term rate of reaction refers to how quickly or slowly hat a reaction proceeds. A reaction rate plot involves the concentration of the species plotted against time.

Now we can see from the plot that concentration is increasing with time. Since the concentration of products increases with time, then the specie whose concentration is plotted is D.

Learn more about rate of reaction: https://brainly.com/question/11256472

Answer:

BHAI SECOND OPTION HOGA

Answer:b

Explanation:

Answer:

atomic mass of sulfur is 32.06 g/mol

Explanation:

both electronegativity and ionization energy increase from bottom to top and from left to right

on the periodic table.

Answer:

If you're indoors, stay inside. If you're outside, stay outside. If you're indoors, stand against a wall near the center of the building, stand in a doorway, or crawl under heavy furniture (a desk or table). Stay away from windows and outside doors.

Answer

Answer:

A water molecule is composed of two hydrogen atom and one oxygen atom but you can't simply take two hydrogen atom stick them onto an oxygen atom

1. Cl2 + H2O → HOCl + HCl

2. Tooth decay starts when when the pH of the mouth is lower than 5.5. Tooth enamel is made up of calcium phosphate and it is one of the hardest substances of the body. But it is corroded when the pH is less than 5.5. The bacteria of our mouth produce acids by degradation of sugar and food particles remaining in our mouth after eating food.

3. Fluorine salts are added in toothpaste to protect our teeth from tooth decay. Fluorine salts are mildly basic, so they neutrelise the acid in our mouth that leads to tooth decay.

4. Tincture of iodine is iodine, pottasium iodide and sodium iodide dissolved in ethanol. Iodine acts in an antiseptic manner by destroying microbial proteins and DNA.

5. Tincture of iodine is clear and reddish brown liquid.

Answer:

∆H0 = -222kJ/mol

Explanation:

Using Hess's law, we can find the ΔH of a reaction from the sum of another related reactions as follows:

Using the reactions:

(1) C(s) + O2(g) → CO2(g) ∆H0= -394 KJ/mol

(2) CO(s) + 1/2 O2(g) → CO2(g) ∆H0= -283 KJ/mol

Twice (1):

2C(s) + 2O2(g) → 2CO2(g) ∆H0= 2*-394 KJ/mol = -788kJ/mol

The inverse reaction of (2):

-(2) CO2(g) → CO(g) + 1/2 O2(g) ∆H0= 283 KJ/mol

Twice this reaction:

2*-(2) 2CO2(g) → 2CO(s) + O2(g) ∆H0= 2*283 KJ/mol= 566kJ/mol

Now, the sum of 2*(1) - 2*(2) produce:

2C(s) + 2O2(g) + 2CO2(g)→ 2CO2(g) + 2CO(g) + O2(g) ∆H0= -788kJ/mol +  566kJ/mol

Subtracting the molecules that ar in both sides of the reaction:

2C(s) + O2(g) → 2CO(g) ∆H0 = -222kJ/mol

Answer:

2500grams

hope this helps

Answer: 2500 gram

Explanation:

Concept:

Here, we need to know the idea of unit conversion.

Unit conversion is the conversion between different units of measurement for the same quantity, typically through multiplicative conversion factors.

1 kg = 1000 g

Solve:

1kg = 1000g

2.5kg = 2.5 × 1000 = 2500g

Hope this helps!! :)

Please let me know if you have any questions

Answer:

I would

Explanation:

I would support the change to the metric system only because it allows children to understand smaller forms of units and measurements. Also, it will allow people in the math and science fields to broaden their knowledge of equations and formulas. Meaning that the scientist and mathematicians will be able to solve more problems in the world right now.  Overall, the education system for the children of the United States would benefit from the change in the measurement system.

Answer:

0.017g/mol

Explanation:

according to the mole concept to calculate the number of moles of a substance you use the formula

number of moles= mass/molecular mass

=4.5g/254g/mole

=0.017moles

I hope this helps and sorry if it's wrong

Answer:

15g

Explanation:

First, you need to correct the answer to the previous question. The percentage by mass of Mg in MgO =

Mg = 24.3 amu

O = 16.0 amu

The total mass of MgO = 40.3 amu

To calculate the percent composition of Mg:

% = 24.3/40.3 x 100

% = 60

To calculate the mass of Mg needed to make 25g of MgO:

x/25g = 60%/100%

100x = (25)(60)

100x = 1500

x = 15g

Answer:

132.17amu

Explanation:

(14.01+1.01 multiplied by 4)=18.05×2=36.1

36.1+32.07= 68.17

16.00×4=64

68.17+64=132.17

Answer:

132.17 amu

Explanation:

just took the test. got 100

Answer:

Initial temperature, T1 = 99.4 Kelvin

Explanation:

Given the following data;

To find the initial temperature (T1), we would use Charles' law;

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles' law is given by the formula;

[tex] \frac {V}{T} = K [/tex]

[tex] \frac {V_{1}}{T_{1}} = \frac {V_{2}}{T_{2}} [/tex]

Making T1 as the subject formula, we have;

[tex] T_{1} = \frac {V_{1}T_{2}}{V_{2}} [/tex]

Substituting the values into the formula, we have;

[tex] T_{1} = \frac {65.8 * 200}{132.4} [/tex]

[tex] T_{1} = \frac {13160}{132.4} [/tex]

Initial temperature, T1 = 99.4 Kelvin

Answer:

A

Explanation:

Hydrogen bonds are intermolecular forces of interaction that exist between molecules of a substance in which hydrogen is bonded to a highly electronegative atom. Hydrogen bonds are strong intermolecular forces and account for high melting and boiling points of small molecules such as water. They stem from dipole-dipole interaction between molecules of a substance.

Metallic bonds are bond forces which exist in a metal. Metal cations are held together by a sea of electrons via electrostatic interaction.

The ionic bond is formed by transfer of electrons from one atom to another leading to the formation of an ion pair held together by electrostatic attraction.

Metallic bonds and hydrogen bonds are much weaker than ionic bonds. Ionic compounds are known to have high melting and boiling points.

Answer:

A

Explanation:

The instrument in which the washer works as a valve is  A ; syringe

Each instrument listed have a washer and a valve, but of all the instruments listed above the instrument that its washer works also as a valve is the syringe.

A syringe is composed of a thin tube and a thinner hollow needle attached to the end of the thin tube. the needle is used and take in liquids and also expel liquids from the syringe ( i.e. washer and valve )

hence the instrument that its washer also functions as a valve is the syringe.

learn more about syringe : https://brainly.com/question/24283167

Answer:

Answer: They are attracted to each other due to their electrostatic attraction. All that means is the hydrogen atom is positively charged, while the oxygen atom is negatively charged. ... The hydrogen of one water molecule will bond to the oxygen atom of another molecule.

Answer:

They are attracted to each other due to their electrostatic attraction. All that means is the hydrogen atom is positively charged, while the oxygen atom is negatively charged. ... The hydrogen of one water molecule will bond to the oxygen atom of another molecule.

Explanation:

Answer:

irregular galaxy

pls give brainliest :)

Answer:

irregular galaxy

it is undefined shape

Answer:

Explanation:

4,5 diethyl-2 fluoro-3-methylheptanal

Answer: The volume of 9.7 tons of given ethylene glycol is 0.0079 [tex]m^{3}[/tex].

Explanation:

Given: Density = 1.11 [tex]g/cm^{3}[/tex]

Mass = 9.7 tons

Convert tons into lb as follows.

[tex]1 ton = 2 \times 10^{3} lb\\9.7 ton = 9.7 ton \times 2 \times 10^{3} \frac{lb}{1 ton}\\= 19.4 \times 10^{3} lb[/tex]

Now, lb is converted into kg as follows.

[tex]1 kg = 2.2046 lb\\1 lb = 0.453592 kg\\19.4 \times 10^{3} lb = 19.4 \times 10^{3} lb \times 0.453592 \frac{kg}{1 lb}\\= 8.79 kg[/tex]

1 kg = 1000 g

So, 8.79 kg = 8790 g

Density is the mass of a substance divided by its volume. Hence, volume of ethylene glycol is calculated as follows.

[tex]Density = \frac{mass}{volume}\\1.11 g/cm^{3} = \frac{8790 g}{volume}\\volume = 7918.92 cm^{3} (1 cm^{3} = 10^{-6} m^{3})\\= 0.0079 m^{3}[/tex]

Thus, we can conclude that the volume of 9.7 tons of given ethylene glycol is 0.0079 [tex]m^{3}[/tex].

Answer:

The Cavendish experiment, performed in 1797–1798 by English scientist Henry Cavendish, was the first experiment to measure the force of gravity between masses in the laboratory and the first to yield accurate values for the gravitational constant

Explanation:

I think that's correct