Answer:
Ohm's law verifies that current directly varies with voltage, when resistance increases, current current decreases.
When temperature increases, the electrons gain more average kinetic energy increases and current increases as well.
In the same situation, resistance also increases because atoms of a component vibrate at higher amplitudes about their mean positions hence reducing the free path of electrons. This increases resistance, hence ohms law violated or disobeyed.
This generates the temperature coefficient of resistance
Amelia is doing an experiment in which she is
going to burn various solid chemicals to see the
colors of flames they produce. For this laboratory
experiment, what types of safety precautions
should she take?
tie hair back
leave open flame unattended to get a drink
only burn the amount of chemicals as
directed by the lab procedure
put out the flame with water from the eyewash
station
Answer:
tie hair back
only burn the amount of chemicals as
directed by the lab procedure
Explanation:
The correct safety precautions for Amelia to take from the options would be to tie her hair back and to only burn the amount of chemicals recommended by the lab procedure.
With her hair left flowing freely, Amelia runs the risk of the hair catching flame while trying to burn the chemicals according to the procedure. Hence, tying her hair up into one neat bunch will limit the risk of it catching fire while working in the lab.
Also, burning less or more than the amount of chemicals recommended by the procedure may be dangerous or hinder Amelia from getting the right result.
Answer:
1,3
Explanation:
just did it
What is the three-body problem? Explain at a level so an 8th grader could understand
Answer:
In physics and classical mechanics, the three-body problem is the problem of taking the initial positions and velocities (or momenta) of three point masses and solving for their subsequent motion according to Newton's laws of motion and Newton's law of universal gravitation.[1] The three-body problem is a special case of the n-body problem. Unlike two-body problems, no general closed-form solution exists,[1] as the resulting dynamical system is chaotic for most initial conditions, and numerical methods are generally required.
Hope this answer is right!
Dad, if you are seeing this, then I have run away. Angie has been torturing me ever since you started dating her, and I have had enough of it. I have been trying to tell you, but you would never listen. Goodbye, and Angie, if you are seeing this, I posted this on here, so you will not be able to delete anything. Have a nice life
Answer:
hey are you ok!?!?!?!
Explanation:
Is Angie your Dad new gf or wife???
Answer:
:(
Explanation:
u ok?
running away from problems only makes things worse. Your teaching urself to run. but I dont blame u
anyway hope u find what ur looking for out there!!
Which force determines if an object is going to move or stay at rest?
a. Friction Force
b. Normal Force
c. Applied Force
d. Net Force
Answer:
a
Explanation:
because it's need someone moving it so it can move somewhere else
A motor has an internal resistance of 12.1 Ω. The motor is in a circuit with a current of
4.0 Amps
What is the voltage?
Answer:
Explanation:
V = I * R
V = 4 * 12.1 = 48.4 v
When do we say that work is done?
Answer:
Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.
Answer:
Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position
hey everyone
what is optics??
Explanation:
Optics is a branch of physics that is the study of light and vision. ... The branch of physics dealing with the nature and properties of electromagnetic energy in the light spectrum and the phenomena of vision. In the broadest sense, optics deals with infrared light, visible light, and ultraviolet light.
5. A wire, resistance 23.6 carries a current. 5.9 A. What is the
potential difference across the wire?
a. V = 139 V
c. V=4V
b. V = 17.7 V
d. V = 0.25 V
Answer:
d
Explanation:
Answer:
B
Explanation:
what current flows between a voltage of 120v across a resistance of 30Ω?
Answer:
4 amp
Explanation:
From ohm's law,
V=IR
so,
I=V/R
I=120/30
I=4amp ans..
please helpppp... thank u ❤️
Answer:
For Ryan:
[tex]at \: highest \: point : v = 0 \\ velocity = 0 \: {ms}^{ - 1} [/tex]
For the football kicked:
[tex]s = ut - \frac{1}{2} g {t}^{2} \\ for \: range : s = 0 \\ u \sin( \theta) = \frac{gt}{2} \\ t = \frac{2u \sin(\theta) }{g} \\ range(x) = ut \\ x = \frac{ {2u {}^{2} \sin(\theta) }^{} }{g} \\ \frac{50 \times 9.8}{ {2318.9}^{} } = \sin(\theta) \\ \\but \: 0 = u \sin(25) - 2 \times 9.8 \times 50 \\ u = 2318.9 \: {ms}^{ - 1} \\ \theta = 12.2 \degree[/tex]
Answer:
the highest point for the first question is 0 meters per second
the answer for question 2 is 45 degrees
Which best describes the energy of a sound wave as it travels through a medium? It increases. It decreases. It remains the same. It depends on the medium.
Answer:
It depends on the medium
Explanation:
2021 edge
The energy of a sound wave decreases as it travels through a medium to another medium. Thus, the correct option is D.
What is a Sound wave?A sound wave is the pattern of disturbance which is caused by the energy which is travelling away from the source of the sound in that medium. Sound waves are the longitudinal waves. This means that the propagation of these vibration of particles is parallel to the energy which this wave propagation direction has. When the atoms in the medium are set in vibration then they move back and forth in a direction. This continuous to occur in back and forth motion resulting in a high-pressure and a low-pressure region in the medium and thus propagating sound.
Sound wave is the physical vibration wave which travel through the air to reach the ears of organisms. Sound energy is the result when force makes an object to vibrate. A wave can lose energy as it travels through a medium because the medium can also absorb the energy from the wave. The medium changes some of the acoustic energy of the sound wave into heat energy.
Therefore, the correct option is D.
Learn more about Sound wave here:
https://brainly.com/question/21995826
#SPJ2
5. What type of chemical reaction is shown?
1 point
2 AgNO3 + CuCl2
-
2 AgCl + 2 Cu(NO3)2
Synthesis
Decomposition
Singe Replacement
Double Replacement
Combustion
Answer:
double Replacement
Explanation:
The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.
General equation : AB+CD = AD +B
A car has a kinetic energy of 103kJ.
The speed of the car is 13.1 m/s.
Calculate the mass of the car.
Give your answer to 2 significant figures.
Answer: 1200kg
Explanation:
KE = (1/2)mv^2
103kJ = 103000J
103000J = (1/2) * m * (13.1m/s)^2
Solve for m
A car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.
A car has a kinetic energy of 103 kJ. The speed of the car is 13.1 m/s,
The kinetic energy of the car = 1/2 × mass × velocity
103000 =0.5 × mass × (13.1) ²
The mass of the car = 1200 Kilogram
Thus, if a car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.
To learn more about mechanical energy, refer to the link;
https://brainly.com/question/2409175
#SPJ5
I am confused and need help with the question above??
According to Archimedes' principle, when will an object float in water?
A. When its volume is less than the volume of water it displaces
B. When its weight is equal to the buoyant force exerted by the water
C. When its density is greater than the density of water
D. When its weight is greater than the weight of water it displaces
Answer:
Its B
Explanation:
a p e x
Which state has the most fixed shape?
O A. Gas
O B. Solid
O C. Liquid
O D. Plasma
Answer: Liquid
“A substance will take on the shape of an open container if it is a Liquid. Explanation: The major state of matter are solid, liquid and gas. Liquid usually have a definite volume.”
Answer:
solid
Explanation:
Solids are fixed and solid.
Select the correct answer
If the resistance in a circuit remains constant, what happens to the electric power when the current increases?
OA. The power will increase.
OB.
The power will decrease,
OC. There will be no power.
OD
The current does not affect the power,
Reset
Next
[tex]\large\mathrm{A. Power\:\: will \:\:Increase }[/tex]
Explanation :We know that,
[tex]\large \mathrm{ \boxed{P = I²R}}[/tex]
where,
P = electric powerR = resistanceI = electric currentAnd when resistance is constant, the power of the circuit will change proportionally with the change in electric current. therefore, if current increases then the electric power of the circuit will increase too.
[tex]\large\mathfrak{{\pmb{\underline{\orange{hope \: \: i t \: \: helps \: \: you}}{\orange{.....}}}}}[/tex]
The two waves shown here are the same distance from point X and are traveling toward each other.
An illustration with a crest 2.0 centimeters high traveling to the right and a second 2.0 centimeters trough traveling toward the left toward point X in the material.
What is the amplitude of the resulting wave when the two waves meet at point X?
0.0 cm
1.0 cm
2.0 cm
4.0 cm
Answer:
(C) on edge.
Explanation:
Answer:
2.0
Explanation:
trust the process.
Q) A farmer moves along the boundary of a
square field of side 10 min 40 s .What will
be the magnitude of displacement of the
farmer at the end of 2 minutes 20 seconds
from his initial position?
If you want to decrease the current created by a generator what can you do?
Answer:
To decrease the current;
1) Use fewer loops or number of turns
2) Use a lower speed of rotation of the coil in the magnetic field
3) Use a weaker magnetic
Explanation:
According to Faraday's Law of induction, which is the basis of the electromagnetism, electromagnetic induction and therefore the basis of the electric generator, can be written as follows;
[tex]\epsilon = -N \cdot \dfrac{\Delta \phi}{\Delta t}[/tex]
Where;
ε = The induced voltage
N = The number of turns (loops)
ΔФ = The change in the magnetic flux
Δt = The change in the time (the duration)
Given that voltage is directly related to the current, decreasing the voltage, decreases the current
To decrease the voltage, and therefore, the current we can;
1) Reduce the number of loops in the coil
2) Increase the time change per unit change in flux by slowing down the speed of rotation of the generator
3) Decrease the amount of change in the magnetic field per turn, by using a weaker magnetic
Croquet balls must have a mass of 0.50 kg. A red croquet ball is moving at 5 m/s. It strikes an at-rest green croquet ball head-on and then continues to move in the same direction, but with a speed of 2 m/s. What is the final speed of the green ball?
A.
5 m/s
B.
0.5 m/s
C.
2 m/s
D.
3 m/s
Answer:
Explanation:
The Law of Momentum Conservation for us has the equation
[tex][m_rv_r+m_gv_g]_b=[m_rv_r+m_gv_g]_a[/tex] and filling in:
[tex][(.50)(5.0)+(.50)(0)]=[(.50)(2.0)+(.50)v_g][/tex] and
2.5 = 1.0 + .50v and
1.5 = .50v so
v = 3 m/s
The final speed of the green ball is 3m/s. This can be calculated by the law of conservation of momentum. Thus, the correct option is D.
What is the law of Conservation of Momentum?
The principle of the law of conservation of momentum states that if any two objects undergo collision, then the total momentum of the objects before and after the collision will be the same if there is no external force acting on the colliding objects.
The Law of Conservation of Momentum has the equation which is:
m₁ × u₁ + m₂ × u₂ = m₁ × v₁ + m₂ × v₂
where, m₁ = mass of object 1,
u₁ = initial velocity of object 1 before collision,
m₂ = mass of object 2,
v₁ = final velocity of object 1 after collision,
v₂ = final velocity of the object 2 after collision.
0.50 × 5 + 0.50 × 0 = 0.50 × 2 + 0.50 × v₂
2.5 + 0 = 1.0 + 0.50 × v₂
2.5 - 1.0 = 0.50 × v₂
1.5 = 0.50 × v₂
1.5/ 0.5 = v₂
v₂ = 3m/s
Therefore, the correct option is D.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ2
What's the meaning of longitudinal?
Answer:
A longitudinal study is a research design that involves repeated observations of the same variables over short or long periods of time. It is often a type of observational study, although they can also be structured as longitudinal randomized experiments.
Explanation:
Convergent boundaries are responsible for
Answer:
A
Explanation:
The plate collisions that occur in these areas can produce earthquakes, volcanic activity, and crustal deformation.
hope it helps you
What is a sound wave?
Using a 100 year time frame,what is the CO2e of 1 tonne of CO2,2 tonne or methane,and 3 tonnes of nitrous oxide
Well, let's see what we've got here:
( 4⁻³ · 3⁴ · 4² ) / ( 3⁵ · 4⁻² ) .
The two simple rules of exponents that we're
going to use here are:
-- Two multiply two numbers with the same base,
add their exponents. Like (A³) · (A²) = A⁵ .
But the bases have to be the same.
-- A negative power just means it belongs in the
other section of a fraction.
A negative power on top means it belongs on the bottom.
A negative power on the bottom means it belongs on top.
Like A⁻² means 1/A² . And 1/B⁻³ means B³ .
That's all you need in order to clean up the big fraction
in the question. But in order to see where you can use
these rules, you need to re-arrange things first.
Original: ( 4⁻³ · 3⁴ · 4² ) / ( 3⁵ · 4⁻² )
Let's send the 4⁻³
to the bottom
where it belongs: ( -- 3⁴ · 4² ) / 4³ · ( 3⁵ · 4⁻² )
Not take that 4⁻² from
the bottom, and put it on
top, where it belongs: ( 4² · 3⁴ · 4² ) / 4³ · ( 3⁵ -- )
Multiply the 4²s on top: ( 4⁴ · 3⁴ ) / ( 4³ · 3⁵ )
Now let me break this up.
Not changing anything, just
writing it in a different way: ( 4⁴ / 4³ ) · ( 3⁴ / 3⁵ )
Look at the first fraction: 4⁴ / 4³ .
Divide top and bottom by 4³ , and it becomes just 4 .
Now look at the second fraction: 3⁴ / 3⁵ .
Divide top and bottom by 3⁴ , and it becomes just 1/3 .
So in the end, we're left with just 4 / 3 .
And THAT is exactly equal to the original big messy fraction
in the question. It has exactly the same numerical value, but
you'd never know it when you see it, because it's a lot simpler.
There are a lot of other ways we could have manipulated and
massaged the original fraction, but the steps are the same:
-- Multiply numbers with the same base, by adding the exponents.
-- Remember that a number with a negative exponent belongs
in the other section of the fraction, with a positive exponent.
Please help me :))
Which golf ball would hit the surface with the greatest impact: a ball that fell one meter above the surface of the Earth or a ball that fell one meter above the surface of the Moon?
Answer:
the one above the surface of earth
Explanation:
earth has gravity the ball of the moon would float away
The wind blows a leaf at 37.9 m/s for 118 s left. How are does the leaf go in that period of time.
A) 3.11 m, left
B) 4470 m, left
C) 80.1 m, left
D) 0.321 m, left
Explanation:
distance = velocity * time
d = 37.9 * 118
distance = 4472.2
give an example of a body with uniform acceleration
Answer:
A ball rolling down the slope.
A bicycle rider is riding the bicycle on tthe slope where both pedals are engaged.
A trip is taken that passes through the following points in order
Point A Om
Point B 15.0 m
Point C -30.0 m
Point D 20.0 m
Point E -10.0 m
Point F 5.0 m
What is the displacement from Point B to Point E?
A) 5.0 m right
B) 85 m right
C) 25.0 m left
D) 85 m left
Answer:
The displacement from point B to point E is 25.0 m left
As an IT technician for your company, you have been notified that the Windows domain does not seem to be functioning properly. Being familiar with domains, you are fairly confident you know what the issue is. But just to be safe, you take the applicable time to gather additional information and to identify what, if anything, has changed.
Which of the following is the BEST next step?
A. Determine the appropriate fix.
B. Create a hypothesis.
C. Implement the fix.
D. Identify what has changed.
E. Gather information.
Answer: Create a hypothesis
Explanation:
From the information given, information has been gathered and the identification to ascertain if there's a change. Then, an hypothesis has to be created in order to know what the problem is.
One has to carry out some research in order to know what went wrong and should also validate the hypothesis by consulting with ones peers. By doing this, the most likely causes of the issues will be gotten.
