Can solid FeBr2 react with Cl2 gas to produce solid FeCl2 and Br2 gas? Why or why not?

Answer:

Depends on the reaction.

Explanation:

Hello,

In this case, the answer is depends on the reaction since the ratios between the rates of both consumption and formation depend upon the stoichiometric coefficients in the chemical reaction. For instance, for the reaction:

A -> 2B

The relationship is:

[tex]\frac{1}{-1}r_A =\frac{1}{2} r_B[/tex]

Therefore, we can see that the rate of consumption of A half the rate of formation of B, but is we consider the following chemical reaction:

2A -> B

The relationship is:

[tex]\frac{1}{-2}r_A =\frac{1}{1} r_B[/tex]

Therefore we can see that the rate of consumption of A doubles the rate of consumption of B.

Best regards.

Answer:

Boiling

Explanation:

When a liquid is heated, the vapor pressure rises steadily. When water attains a temperature of 100°C or 212°F its vapor pressure is now equal to the atmospheric pressure at sea level, this is what we mean by boiling.

When this occurs, water continues to evaporate untill the vapor pressure inside the bubbles becomes high enough to stop water bubbles from collapsing again from the pressure of the water around it so the bubbles rise and break the surface.

Lakes, oceans, glaciers, clouds, etc. It categorizes all forms of water on earth.

hydro = water

Answer:

Lakes, streams, ground water, polar ice caps, glaciers, water vapor, and rivers!

Explanation:

The hydrosphere is made up of all the water on Earth. So anything that is water, like oceans, can be found in the hydrosphere:)

Answer:

mol LiCl = 4.83 m

Explanation:

GIven:

Solution of LiCl in water XLiCl = 0.0800

Mol of water in kg = 55.55 mole

Find:

Molality

Computation:

mole fraction = mol LiCl / (mol water + mol LiCl)

0.0800 = mol LiCl / (55.55 mol + mol LiCl)

0.0800 mol LiCl + 4.444 mol = mol LiCl

mol LiCl - 0.0800 mol LiCl = 4.444 mol

0.92 mol LiCl = 4.444 mol

mol LiCl = 4.83 m

Answer:Cobb

Explanation:What y'all

Answer:

The correct option is C.

Note the full question and structure of the moleculesis found in the attachment below.

Explanation:

Triglycerides or triacylglycerols are non-polar, hydrophobic lipid molecules composed of three fatty acids linked by ester bonds to a molecule of glycerol.

The fatty acids linked to the glycerol molecule are denoted by R and may be of the same kind or different. when the R group is the same, the R is attached in all the three positions for ester bonding in the glycerol molecule but when they are different are denoted by R, R' and R'' respectively.

During the hydrolysis of triglycerides, the three fatty acids molecules are obtained as well as a glycerol molecule.

From the question, when 1 mole of the triglyceride is hydrolysed, 2 moles of RCOOH, 1 mole of R'COOH and 1 mole of glycerol is obtained. The triglyceride must then be composed of two fatty acids which are the same denoted by R, and a different fatty acid molecule denoted by R'.

The correct option therefore, is C

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

Answer:

b. carbon diamond turning to carbon graphite at normal pressure.

Explanation:

Graphite is the stable form of the carbon element under normal ambient pressure.  The process of conversion of carbon diamond to carbon graphite is a spontaneous process under typical ambient conditions, since diamonds are said to be thermodynamically unstable but kinetically stable under ambient conditions, and the process of conversion can take place without a continuous input of energy from an external source.

Answer:

It will react with water

Explanation:

I know this is an older question, but I just wanted to provide the correct answer.

Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.

The conjugate base of a weak acid affect pH because it will react with hydronium ion.

A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.

Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;

CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)

We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.

Learn more: https://brainly.com/question/8592296

Missing parts;

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above

Answer:

In basic conditions that is ( pH > 7 ), the equilibrium shifts towards right and produces a lot of (-ve) negatively charged fatty acids which are polar, In water, since they have long hydrophobic hydrocarbon part, this form micelles where the hydrocarbon part  remain inside the  sphere and -coo- group remain outside the sphere due to H-bonding interaction with water.

At ( pH < 5 ) I.e acidic conditions, the equilibrium shift to the left giving neutral molecules which can not have stronger H-bonding interaction .

So micelles cant form as they become insoluble.

The two layers are part of the thermosphere are  exosphere and ionosphere.

The Exosphere is the topmost layer of the Earth's atmosphere.

and its gradually disappear into the vacuum of space.

It consist two parts that are:

exosphere and ionosphere.

Thus, option "A" is correct, the rest of the option is not a part of thermosphere.

To learn more about  atmospheric layers click here:

https://brainly.com/question/25881294

#SPJ2

Answer:

hi hope your doing great the answer is A

Explanation:

its on Edge 2020

hope i helped :)

Answer: It's the anode broski (B)

Explanation: I'm taking the Chem summer course too broski, this was the correct answer. Cheers broski

Answer:

[OH-] = 1.0 x 10-10 M

Explanation:

The acidity of a solution can be determined directly from the concentration of the hydrogen ions and indirectly from the concentrations of the hydroxide ions.

Generally, for a neutral solution we have;

[H3O+] = [OH-] = 1.0 x 10-7 M

For an acidic solution;

[H3O+] > 1.0 x 10-7 M

[OH-] < 1.0 x 10-7 M

Comparing the options the correct option is;

[OH-] = 1.0 x 10-10 M

Answer:

Atomic mass = 127.198 amu

Explanation:

The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.

Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)

Atomic mass = 8.05365 +  29.19403 + 89.95032

Atomic mass = 127.198 amu

Answer:

AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Explanation:

If a student mixes 1.0 mL of aqueous silver nitrate AgNO3 (aq)  with 1.0 mL of aqueous sodium chloride, NaCl (aq), in a clean test tube.

The sodium chloride is being acidified with dilute trioxonitrate (V) acid. Then a few drops of  silver trioxonitrate(V) is added afterwards. A  white precipitate of silver chloride, which dissolves readily in aqueous ammonia indicates the presence of sodium chloride.

The reaction proceeds as follows:

[tex]\mathtt{AgNO_{3(aq)} + NaCl _{(aq)} \to AgCl _{(s)} + NaNO_3_{(aq)}}[/tex]

From the reaction between AgNO3 (aq) and NaCl (aq), AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Answer:

See explanation

Explanation:

1)

Mg3N2(s) + 6H2O(l) ------------> 3Mg(OH)2 + 2NH3(g)

Number of moles of magnesium nitride= mass/molar mass= 4.86g/100.9494 g/mol = 0.048 moles

1 mole of magnesium nitride yields 3 moles of magnesium hydroxide

0.048 moles of magnesium nitride yields 0.048 moles × 3= 0.144 moles of magnesium hydroxide

Theoretical yield of magnesium hydroxide = 0.144 moles × 58.3197 g/mol = 8.398 g

Percent yield= actual yield/ theoretical yield × 100

Percent yield= 7.18/8.398 × 100/1 = 85.5%

2)

N2(g) + 3H2(g) -------> 2NH3(g)

Number of moles of hydrogen gas = mass/ molar mass = 6.41g/ 2gmol-1 = 3.205 moles of hydrogen gas.

From the balanced reaction equation;

3 moles of hydrogen gas yields 2 moles of ammonia

3.205 moles of hydrogen gas yields 3.205 × 2/3 = 2.1367 moles of ammonia

Theoretical yield of ammonia = 2.1367 moles × 17 gmol-1 = 36.3 g

Percent yield = actual yield/ theoretical yield ×100

Percent yield = 26.2/36.3 ×100

Percent yield = 72.2%

3)

3Cl2(g) + 3H2O(l) ------> HOCl3(aq) + 5HCl(aq)

Number of moles of water= mass/ molar mass = 3.79g/18 gmol-1 = 0.21 moles

Since

3 mole of water yields 5 mole of HCl

0.21 moles of water yields 0.21 × 5/3 = 0.35 moles of HCl

Theoretical yield of HCl = 0.35 moles × 36.5 gmol-1 = 12.775 g

Percent yield = actual yield/ theoretical yield × 100/1

Percent yield = 8.70/12.775 ×100

Percent yield = 68.1%

Answer:

im pretty sure its the anode

Explanation:

To solve such, we must know the concept of electrolysis reaction. The correct option is option D among all given options. At anode electrode oxygen forms.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

Electrolysis is the process of passing an electric current through a material to cause a chemical change. A chemical change occurs when a material loses or acquires the electron. To refine aluminum from its ore, aluminum oxide is electrolyzed to form aluminum and oxygen. At anode electrode oxygen forms.

Therefore, the correct option is option D among all given options. At anode electrode oxygen forms.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer:

The temperature at which the vapor pressure would be 0.350 atm is 201.37°C

Explanation:

The relationship between variables in equilibrium between phases of one component system e.g liquid and vapor, solid and vapor , solid and liquid can be obtained from a thermodynamic relationship called Clapeyron equation.

Clausius- Clapeyron Equation can be put in a more convenient form applicable to vaporization and sublimation equilibria in which one of the two phases is gaseous.

The equation for Clausius- Clapeyron Equation can be expressed as:

[tex]\mathtt{In \dfrac{P_2}{P_1}= \dfrac{\Delta \ H _{vap}}{R} \begin {pmatrix} \dfrac{T_2 -T_1}{T_2 \ T_1} \end {pmatrix} }[/tex]

where ;

[tex]P_1[/tex] is the vapor pressure at temperature 1

[tex]P_ 2[/tex] is the vapor pressure  at temperature 2

∆Hvap = enthalpy of vaporization

R = universal gas constant

Given that:

[tex]P_1[/tex] = 1 atm

[tex]P_ 2[/tex]  = 0.350 atm

∆Hvap = 28.5 kJ/mol = 28.5 × 10³ J/mol

[tex]T_1[/tex] = 282 °C  = (282 + 273) K = 555 K

R = 8.314 J/mol/k

Substituting the above values  into the Clausius - Clapeyron equation, we have:

[tex]\mathtt{In \dfrac{P_2}{P_1}= \dfrac{\Delta \ H _{vap}}{R} \begin {pmatrix} \dfrac{T_2 -T_1}{T_2 \ T_1} \end {pmatrix} }[/tex]

[tex]\mathtt{In \begin {pmatrix} \dfrac{0.350}{1} \end {pmatrix} } = \dfrac{28.5 \times 10^3 }{ 8.314 } \begin {pmatrix} \dfrac{T_2 - 555}{555T_2} \end {pmatrix} }[/tex]

[tex]\mathtt{In \begin {pmatrix} \dfrac{0.350}{1} \end {pmatrix} } = \dfrac{28.5 \times 10^3 }{ 8.314 } \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]

[tex]- 1.0498= 3427.953 \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]

[tex]\dfrac{- 1.0498}{3427.953}= \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]

[tex]- 3.06246906 \times 10^{-4}= \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]

[tex]\dfrac{1}{T_2} = \begin {pmatrix} \dfrac{1}{555}+ (3.06246906 \times 10^{-4} ) \end {pmatrix} }[/tex]

[tex]\dfrac{1}{T_2} = 0.002108048708[/tex]

[tex]T_2 = \dfrac{1}{0.002108048708}[/tex]

[tex]\mathbf{T_2 }[/tex] =  474.37 K

To °C ; we have [tex]\mathbf{T_2 }[/tex] =   (474.37 - 273)°C

[tex]\mathbf{T_2 }[/tex] =  201.37 °C

Thus, the temperature at which the vapor pressure would be 0.350 atm is 201.37 °C

The temperature of the liquid at the given vapor pressure is 201.5 ⁰C.

The given parameters;

The temperature of the liquid will be determined by applying Clausius- Clapeyron Equation;

[tex]ln(\frac{P_2}{P_1} ) = \frac{\Delta H}{R} (\frac{T_2 -T_1}{T_1T_2} )[/tex]

where;

[tex]ln(\frac{P_2}{P_1} ) = \frac{\Delta H}{R} (\frac{T_2 -T_1}{T_1T_2} )\\\\ln(\frac{0.35}{1} ) = \frac{28.5 \times 10^3}{8.314} (\frac{T_2 - 555}{555T_2} )\\\\-1.049 = 6.176- \frac{3427.95}{T_2} \\\\\frac{3427.95}{T_2} = 6.176 + 1.049\\\\\frac{3427.95}{T_2} = 7.225\\\\T_2 = \frac{3427.95}{7.225} \\\\T_2 = 474.5 \ K\\\\T_2 = 474.5 - 273 = 201.5 \ ^0C[/tex]

Thus, the temperature of the liquid at the given vapor pressure is 201.5 ⁰C.

Learn more here:https://brainly.com/question/1077674

Answer : HBr polar

please add me to brainalist

Answer: So other scientist can replicate the experiment and see if they get the same results in other words, test reliability.

Explanation:

Answer:

Depends on the chemicals.

Explanation:

The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is  a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.

Answer:

C10H22

Explanation:

Graphite is known as an allotrope of carbon. Its characteristics include being black and slippery and as used as lubricants.

Gold (Au) is an element on the periodic table with atomic number 79 and a mass number 197 which exists as a metal due to its hydrogen bonds.

C10H22 which is also known as decane belongs to the Alkane family.The General forces of attraction between the alkane family are weak but in the case of decade there is Van der waal force which makes Decane C10H22 a Molecular Solid.

Answer:

anilinium ion > ammonium ion > amide > aniline > secondary amine

Explanation:

Acidity of amine derivatives can derived from their pKa values.

The rule of thumb for acidity with relation to pKa values is that:

As the pKa decreases the acid strength increases and the conjugate base decreases. Similarly, as the pKa increases, the acid strength decreases and the conjugate base increase.

Hence the stronger the acid , the  lower pKa value  and the weaker the acid , the stronger the pKa value.

So the pKa value for anilinium ion = 4.6

ammonium ion = 9.4

Amide = 15

Similarly, for aniline and secondary amine, in order to determine the derivative with the higher acidity, we will consider the electron withdrawing substituent group.

The more difficult the electron are being withdraw from the electron withdrawing substituent , the more acidic the compound.

In aniline , the stabilized benzene ring attached to NH₂ makes it a less electron withdrawing group compared to the straight chains structure found in secondary amine where electron are easily withdraw by nucleophilic substitution reactions.

Thus, from highest acidity (lowest pKa value) to lowest acidity (highest pKa value).

the amine derivatives ranking is as follows:

anilinium ion > ammonium ion > amide > aniline > secondary amine

Explanation:

Entropy refers to the degree of disorderliness of a system.

a. A snowman melts on a spring day.

Entropy is increasing because there is a change in state of matter from solid to liquid. Liquid particles have more freedom f movement compared to solids.

b. A document goes through a paper shredder.

Entropy increases because random, disorganized bits of paper are left.

c. A water bottle cools down in a refrigerator.

Entropy  decreases because temperature is directly proportional to entropy.

d. Silver tarnishes

Entropy increases because random bits of the sliver particles are formed.

e. Dissolved sugar precipitates out of water to form rock candy.

Entropy decreases because the random dissolved sugar precipitates are ordered into a rock candy.

Answer:

[tex]E=2.06\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The wavelength of electromagnetic radiation is 963.5 nm.

We need to find the energy of a photon with this wavelength.

The formula used to find the energy of a photon is given by :

[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]

So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].

Answer:

406 K.

Explanation:

The following data were obtained from the question:

Number of mole (n) = 0.750 mole

Volume (V) = 10.0 L

Pressure (P) = 2.50 atm

Temperature (T) =.?

Note: Gas constant (R) = 0.0821 atm.L/Kmol

The temperature, T can be obtained by using the ideal gas equation as follow:

PV = nRT

2.5 x 10 = 0.75 x 0.0821 x T

Divide both side by 0.75 x 0.0821

T = (2.5 x 10) /(0.75 x 0.0821 )

T = 406 K.

Therefore, the temperature is 406 K.

Answer: 406 K

Explanation:

We can rewrite the ideal gas law to solve for T:

PV = nRT

T=PV / nR

We are given the following from the problem:

n=0.750 mol P=2.50 atm V=10.0 L

Plugging in our values and using R=0.08206 L⋅atm / K⋅mol we get:

T=(2.50 atm)(10.0 L) / (0.750 mole)(0.08206L ⋅ atm ⋅ mole K) = 406 K

Answer:

0.05 mole of Br2.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

C2H4 + Br2 —› C2H4Br2

From the balanced equation above,

1 mole of C2H4 reacted with 1 mole of Br2 to produce 1 mole of C2H4 Br2.

Finally, we shall determine the number of moles bromine that will react with 0.05 mole of C2H2.

The number of mole of Br2 needed for the reaction can be obtained as follow:

From the balanced equation above,

1 mole of C2H4 reacted with 1 mole of Br2.

Therefore, 0.05 mole of C2H4 will also react with 0.05 mole of Br2.

Therefore, 0.05 mole of Br2 is needed for the reaction.

Answer:

NSAIDs are steroidal anti-inflammatories, their action is on the phospholipase A2 enzyme, this enzyme is responsible for breaking down the phospholipids of the membrane to trigger an inflammatory response. This is how steroidal anti-inflammatory drugs inhibit ALL inflammatory pathways (not like NSAIDs that they only inhibit the COX pathway).

These corticosteroid drugs cannot exceed the systemic mineralocorticoid value 1 in the body, since this corticosteroid hormone is also released by the adrenal cortex.

The NSAIDs generate: sporadic peaks in blood glucose, hypertension, fluid retention, increase in body fat mass, possible suppression of the adrenal cortex over time, inhibiting endogenous synthesis of corticosteroids.

On the other hand, naproxen and ibuprofen are NSAIDs, that is, non-steroidal anti-inflammatory drugs that do not influence both routes of inflammation, but only COX, this enzyme is abbreviated as COX but is called cyclooxygenase, and is responsible for a single route of inflammation.

NSAIDs such as naproxen and ibuprofen can cause gastric disorders such as ulcers or gastritis if they are consumed in a very repetitive manner.

In addition, both drugs are anti-inflammatory, analgesic and antipyretic. Although its two main functions are the first two, it was shown to have an effect in lowering body temperature.

That they are anti-inflammatory means that they inhibit the path of inflammation and analgesics the path of pain.

Explanation:

Both types of drugs generate the same effect but by different mechanisms.

Some are steroids and others are not, although steroids are considered to have a greater risk of benefit that is why they are administered against more systematically compromised instances such as anaphylactic shock.

NSAIDs such as naproxen and ibuprofen are the most prescribed today, since they have few risks and very good benefits, meaning that their adverse effects are not lethal or highly relevant and have a good effect on symptoms.

Both must be administered with care when treating a diabetic patient since corticosteroids generate glycemic peaks or increase in blood glucose, and NSAIDs compete for plasma protein with oral hypoglycemic agents, thus generating that these are in higher free concentrations. high diffusing better through the tissues and increases the potency of the adverse effects of these.

Answer:

Temperature of the water

Explanation:

In every study, there must be independent and dependent variables. An independent variable is the variable that is changed in order to obtain a response. In this case, the temperature of the water is being changed, the response in this experiment is the respiration rate of the goldfish.

Thus the respiration rate of the goldfish is the dependent variable because it is controlled by the temperature of the water and changes accordingly.

Summarily, the independent variable is the temperature of the water while the dependent variable is the respiration rate of the goldfish.

Answer:

Lithium chloride (LiCl), carbon dioxide, and water

Explanation:

Li₂CO₃ + HCl ⇒ LiCl + CO₂ + H₂O

When lithium carbonate reacts with hydrochloric acid, lithium chloride, water, and bubbles of carbon dioxide gas are given off. This is the result of a double displacement reaction followed by a decomposition reaction.

Hope that helps.