Calculate the individual percent recoveries of benzoic acid, naphthalene and 3-nitroaniline if you were able to collect 9.75 g of benzoic acid, 6.41 g of naphthalene, and 7.71 g of 3-nitroaniline from a set of extractions. The starting mass of the mixture was 26.24 g. (0.6 pt)

Answer:

we don't understand why humans have only 46 chromosomes

Answer:

46 chromosomes is what we don't understand

Copper tube is used in EBRT.

Copper tube is used in EBRT.

To learn more about External Beam Radiation. Therapy (EBRT) refer:https://brainly.com/question/1889767

#SPJ2

Answer:

See detailed explanation.

Explanation:

Hello there!

In this case, for the given scenario, we will proceed as follows:

1. Here, we infer that the products are iron (III) hydroxide (precipitate) and calcium chloride:

[tex]3Ca(OH)_2+2FeCl_3\rightarrow 3CaCl_2+2Fe(OH)_3[/tex]

2. In this step we firstly calculate the moles of both reactants, by using their molar masses 74.093 and 162.2 g/mol respectively:

[tex]14.0gCa(OH)_2*\frac{1molCa(OH)_2}{74.093gCa(OH)_2}=0.189molCa(OH)_2 \\\\17.0gFeCl_3*\frac{1molFeCl_3}{162.2gFeCl_3}=0.105molFeCl_3[/tex]

Now, we calculate the moles of calcium hydroxide consumed by 0.105 moles of iron (III) chloride by using the 3:2 mole ratio between them:

[tex]0.105molFeCl_3*\frac{3molCa(OH)_2}{2molFeCl_3} =0.157molCa(OH)_2[/tex]

Thus, we infer that calcium hydroxide is in excess as 0.189 moles are available for it but just 0.157 moles react and therefore, iron (III) chloride is the limiting reactant.

3. Here, we use the moles of iron (III) chloride we've just computed, the 2:2 mole ratio with iron (III) hydroxide and its molar mass (106.867 g/mol) as shown below:

[tex]0.105molFeCl_3*\frac{2molFe(OH)_3}{2molFeCl_3} *\frac{106.867gFe(OH)_3}{1molFe(OH)_3} \\\\=11.2gFe(OH)_3[/tex]

Regards!

not 100% sure but I think its C

The correct name for the given alkane molecule is 2,2-dimethylpropane. (Option C)

The given alkane molecule is composed of three carbon atoms. The central carbon atom is bonded to two methyl groups (CH₃) on either side. This results in a branched structure where the methyl groups are attached to the same carbon atom.

According to the rules of IUPAC nomenclature, the prefix "2,2-" indicates that the methyl groups are attached to the second carbon atom in the main chain. The parent chain, which consists of three carbon atoms, is named propane. Since there are two identical methyl groups attached to the second carbon atom, the compound is named 2,2-dimethylpropane.

Hence, the name of the given alkane molecule is 2,2-dimethylpropane.

Learn more about IUPAC here:

https://brainly.com/question/16631447

#SPJ 6

Answer:

molecules of real gases occupy no volume.

Explanation:

Answer:

12.5 %

Explanation:

In CCP, the effective number of anion is 4

That is there are 4 I- present in 1 unit cell

Number of tetrahedral void = 2*effective number of anion

= 2*4

= 8

In ZrI4, for every 4 anion, there are only 1 Zr atom.

So, one tetrahedral void is occupied per unit cell out of 8

% tetrahedral void occupied = 1*100/8

= 12.5 %

Answer: 12.5 %

A leaking tap that drops water at the rate of 3 drops every second, will leak 259.2 L in a day.

We know that a leaking tap drops water at the rate of 3 drops every second and that each drop is approximately 1 ml. The milliliters of water dropped every second are:

[tex]\frac{3drop}{1s} \times \frac{1mL}{1drop} = \frac{3mL}{1s}[/tex]

We want to know the number of seconds in 1 day. We will use the following conversion factors:

[tex]1day \times \frac{24h}{1day} \times \frac{60min}{1h} \times \frac{60s}{1min} = 86400 s[/tex]

3 mL of water are dropped every second. The mL of water dropped in 86400 s are:

[tex]86400 s \times \frac{3mL}{1s} = 259200 mL[/tex]

Finally, we will convert mL to L using the conversion factor 1 L = 1000 mL.

[tex]259200 mL \times \frac{1L}{1000 mL} = 259.2 L[/tex]

Approximately 259.2 L of water will be dropped in 1 day.

You can learn more about unit conversions here: https://brainly.com/question/19420601

The special properties of surface layers, that is, the thin layers of a substance at the boundary of contiguous bodies, mediums, or phases. These properties result from the excess free energy of the surface layer and from the special features of the layer's structure and composition.

HOPE IT'S HELPFUL FOR U MATE...

Lester Brown thinks reducing carbon dioxide emissions 80% by 2050 is not fast enough.

Lester Brown is an American environmentalist who has focused on studying the environment and its protection. In recent years, he has made alerts for world leaders and large industries to strive to stop CO2 emissions because this greenhouse gas has a massive influence on global warming.

Therefore, Lester Brown considers that the projections of reduction of greenhouse gases (especially CO2) made by the world powers for the year 2050, ignore the reality because he considers that CO2 emissions must decrease by at least one 80% in 2020 to avoid drastic consequences in current living conditions. Therefore, the answer is B.

Learn more in: https://brainly.com/question/1577730?referrer=searchResults

Taking into account the definition of molarity and the stoichiometry of the reaction, the correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

The balanced reaction is:

H₃PO₄ (aq) + 3 NaOH (aq) → Na₃PO₄ (aq) + 3 H₂O(aq)

Then, by stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Molarity is the number of moles of solute that are dissolved in a given volume.

Molarity is determined by:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

 Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, 0.42 L of 2.39 M phosphoric acid reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]2.39 \frac{moles}{liter}=\frac{number of moles of phosphiric acid}{0.42 liters}[/tex]

Solving:

number of moles of phosphiric acid= 2.39 [tex]\frac{moles}{liter}[/tex]* 0.42 liters

number of moles of phosphiric acid= 1.0038 moles ≅ 1 mole

Approaching 1 mole of the amount of phosphoric acid required, then by stoichiometry of the reaction, 3 moles of NaOH are necessary to react with 1 mole of the acid.

Then by definition of molarity and knowing that 6.9 M NaOH is needed, you can calculate the necessary volume amount of NaOH by:

[tex]6.9 \frac{moles}{liter} =\frac{3 moles}{volume}[/tex]

Solving:

6.9 [tex]\frac{moles}{liter}[/tex]* volume= 3 moles

[tex]volume=\frac{3 moles}{6.9\frac{moles}{liter} }[/tex]

volume= 0.44 L

The correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

Learn more about molarity with this example: https://brainly.com/question/15406534?referrer=searchResults

C₁₀H₁₄N₂ is the empirical formula of the compound whose mass is 40.57 present in 0.2500 moles.

Alkaloid compounds are those naturally present organic compounds in which nitrogen is present.

First we calculate the molecular mass of wanted compound by using the below formula:

n = W/M, where

n = no. of moles = 0.2500 moles (given)

W = given mass = 40.57 grams (given)

M = molar mass = 40.57 grams/= 0.2500 moles = 162.28 g/mole

In the question, given that:

% composition of carbon = 74.02%

% composition of hydrogen = 8.710%

% composition of nitrogen = 17.27%

Now we calculate the mass of these composition by using the below formula:

Composition mass = compound mass * % composition / 100

Mass of carbon = 162.28 * 74.02 / 100 = 120.11g

Mass of hydrogen = 162.28 * 8.710 / 100 = 14.13g

Mass of nitrogen = 162.28 * 17.27 / 100 = 28.02g

Now we calculate the moles of these composition to made empirical formula as:

Moles of carbon = 120.11 / 12 = 10

Moles of hydrogen = 14.13 / 1 = 14

Moles of nitrogen = 28.02 / 14 = 2

Thus, the empirical formula of the compound is C₁₀H₁₄N₂.

To know more about empirical formula, visit the below link:

https://brainly.com/question/1603500

According to Arrhenius definition of acids, [tex]NH4^+[/tex] is an acid.

According  to Arrhenius  definition of acids and bases, acid is any substance that produces hydrogen ion in solution as its only positive ion.

Following this definition, let us now consider what happens when [tex]NH4^+[/tex] is introduced into a water;

[tex]NH4^+[/tex](aq)-------> NH3(aq) + [tex]H^+[/tex](aq)

Hence, according to Arrhenius definition of acids, [tex]NH4^+[/tex] is an acid.

For another example of Arrhenius acids, see

https://brainly.com/question/516295

Answer:

[tex]\boxed {\boxed {\sf 0.14 \ mol \ CaCl_2}}[/tex]

Explanation:

We are asked to calculate the number of moles of 15 grams of calcium chloride (CaCl₂).

To convert from grams to moles, we use the molar mass, or the mass of 1 mole of a substance. Molar masses are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead of atomic mass units.

Look up the individual elements in the compound: calcium and chloride.

Notice the chemical formula has a subscript of 2 after Cl or chlorine. There are 2 moles of chlorine in every 1 mole of calcium chloride. We must multiply chlorine's molar mass by 2 before adding calcium's molar mass.

We will convert using dimensional analysis, so we must create a ratio using the molar mass.

[tex]\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

We are converting 15 grams of calcium chloride to moles, so we must multiply the ratio by this value.

[tex]15 \ g \ CaCl_2 *\frac {110.98 \ g \ CaCl_2}{ 1 \ mol \ CaCl_2}[/tex]

Flip the ratio so the units of grams of calcium chloride cancel.

[tex]15 \ g \ CaCl_2 *\frac { 1 \ mol \ CaCl_2}{110.98 \ g \ CaCl_2}[/tex]

[tex]15 *\frac { 1 \ mol \ CaCl_2}{110.98}[/tex]

[tex]\frac { 15}{110.98} \ mol \ CaCl_2[/tex]

[tex]0.1351594882\ mol \ CaCl_2[/tex]

The original measurement of grams (15) has 2 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the thousandth place tells us to round the 3 up to a 4.

[tex]0.14 \ mol \ CaCl_2[/tex]

15 grams of calcium chloride is approximately 0.14 moles of calcium chloride.

Answer:B) 1s 2s 2p 3s 3p 4s 3d

Explanation:

The ground state electron configuration shows how the electrons in the atomic orbitals of an atom are in their lowest , most stable energy arrangements and since Electrons must be filled following the Aufbau's principle(electrons fill lowest energy shells first)

Now, Titanium lies in period IV and  group 4 of the periodic table with 22 as its atomic number

Thus, the ground-state electron configuration of a neutral atom of titanium is 1s²2s²2p⁶3s²3p⁶4s²3d².  

The freezing of water into ice and the dehydration of copper sulfate are both reversible. The correct options are C and D.

They are reactions in which the reverse can occur.

The freezing of water into ice can be undone. That is, the ice can be thawed back to water.

The dehydration of copper sulfate involves the removal of water molecules. As soon as water becomes available again, the reaction is reversed.

More on reversible reactions can be found here: https://brainly.com/question/16614705

#SPJ1

Explanation:

The standard entropy change of a reaction has a positive value. This reaction results in an increase in entropy.

Positive entropy means the system has increased its degree of disorderness.

Answer:

F 64.6 percent of carbon may be

The concentration of CO₃²⁻ ions will be higher

To explain, I want you to imagine H₂CO₃ in water.

we know that it will lose 2 of it's protons, and form 2 ions

The ion which is more stable will have a higher concentration because that ion will refuse to react with anything else, so once something turns into that specific ion, it's not going back... unless there's a more stabler ion possible

In this case, the 2 ions formed are: HCO₃⁻ and CO₃⁽²⁻⁾, drawing the structures of both the ions tells us that both of them have resonance, but the CO₃⁽²⁻⁾ ion has more resonance structures and hence is more stable

Answer:

b. radicals form easily in the presence of chlorine radicals.

Explanation:

Chlorine radicals perform the first propagation step: because "radicals form easily in the presence of chlorine radicals."

This is because the first propagation step consumes a CHLORINE RADICAL while the second propagation step regenerates a CHLORINE RADICAL. In this way, a chain reaction occurs, whereby one CHLORINE RADICAL can ultimately cause thousands of molecules of methane to be converted into chloromethane with C12 present.

Hence, in this case, the correct answer is that "radicals form easily in the presence of chlorine radicals."

N₂ + 3H₂ ⇄ 2NH₃ + heat

In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat

but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached

where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially

Answer:

Explanation:

heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction

decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment

so equilibrium will shift towards the products

Answer:

Exothermihic chart

Explanation:

Answer:

ag and au are sure not to react. but hg and sn might or might not

Answer:

It would look bigger and brighter

Explanation:

It would look bright as sunlight

Answer:

ethyl - 3- heptanol mouthing

Answer:

a. 2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

b. i. NO₂⁻ is the oxidizing agent

ii. NO₃⁻ is the reducing agent.

Explanation:

a. Balance the following skeleton reaction

The reaction is

NO₂ (g) → NO₃⁻ (aq) + NO₂⁻ (aq)

The half reactions are

NO₂ (g) → NO₃⁻ (aq)  (1) and

NO₂ (g) → NO₂⁻  (aq) (2)

We balance the number of oxygen atoms in equation(1) by adding one H₂O molecule to the left side.

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq)

We now add two hydrogen ions 2H⁺ on the right hand side to balance the number of hydrogen atoms

NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq)

The charge on the left hand side is zero while the total charge on the right hand side is -1 + 2 = +1. To balance the charge on both sides, we add one electron to the right hand side.

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq) + e⁻  (4)

Since the number of atoms in equation two are balanced, we balance the charge since the charge on the left hand side is zero and that on the right hand side is -1. So, we add one electron to the left hand side.

So, NO₂ (g) + e⁻ → NO₂⁻  (aq) (5)

We now add equation (4) and (5)

So, NO₂ (g) + H₂O (l) → NO₃⁻ (aq) + 2H⁺ (aq) + e⁻  (4)

+  NO₂ (g) + e⁻ → NO₂⁻  (aq) (5)

2NO₂ (g) + H₂O (l) + e⁻ → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq) + e⁻  (4)

2NO₂ (g) + H₂O (l)  → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq)  

We now add two hydroxide ions to both sides of the equation.

So, 2NO₂ (g) + H₂O (l) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H⁺ (aq) + 2OH⁻ (aq)

The hydrogen ion and the hydroxide ion become a water molecule

2NO₂ (g) + H₂O (l) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + 2H₂O (l)

2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

So, the required reaction is

2NO₂ (g) + 2OH⁻ (aq) → NO₃⁻ (aq) + NO₂⁻  (aq) + H₂O (l)

b. Identify the oxidizing agent and reducing agent

Since the oxidation number of oxygen in NO₂ is -2. Since the oxidation number of NO₂ is zero, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = 0

x + 2(-2) = 0

x - 4 = 0

x = 4

Since the oxidation number of oxygen in NO₂⁻ is -1. Since the oxidation number of NO₂⁻ is -1, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = 0

x + 2(-2) = -1

x - 4 = -1

x = 4 - 1

x = 3

Also, the oxidation number of oxygen in NO₃⁻ is -1. Since the oxidation number of NO₃⁻ is -1, we let x be the oxidation number of N.

So, x + 2 × (oxidation number of oxygen) = -1

x + 3(-2) = -1

x - 6 = -1

x = 6 - 1

x = 5

i. The oxidizing agent

The oxidation number of N changes from +4 in NO₂ to +3 in NO₂⁻. So, Nitrogen is reduced and thus  NO₂⁻ is the oxidizing agent

ii. The reducing agent

The oxidation number of N changes from +4 in NO₂ to +5 in NO₃⁻. So, Nitrogen is oxidized and thus and  NO₃⁻ is the reducing agent.

Answer:

A) XY3

In both of the atom, they want to have 8 valence electrons on the outer shell so they can become stable.

Answer:

A

Explanation:

I'm assuming this question implies that the surface area is in relation to the volume of the pieces. In that case, the SMALLER the size of each piece, the larger the surface area. This is because more particles are able to fit into the container if they are smaller, leading to more surface area. Since more pieces can fit into the container, MORE collisions happen according to collision theory. I cannot add a link, but for a helpful analogy, look up "How To Speed Up Chemical Reactions (and get a date) - Aaron Sams.

Answer: A. smaller, more

Explanation: Founders Educere answer