Answer:
final-intial temperature= enthalpy change
Identify each of the following half-reactions as either an oxidation half-reaction or a reduction half-reaction.
half-reaction identification
Cu+(aq)--->Cu2+(aq) + e- _________
I2(s) + 2e--->2I-(aq) _________
Answer:
Cu+(aq)--->Cu2+(aq) + e- : oxidation
reason: there is loss of electrons.
I2(s) + 2e--->2I-(aq) : reduction
reason: There is reduction of electrons.
What will be the equilibrium temperature when a 245 g block of lead at 300oC is placed in 150-g aluminum container containing 820 g of water at 12.0oC?
Answer:
The correct approach is "12.25°C".
Explanation:
Given:
Mass of lead,
mc = 245 g
Initial temperature,
tc = 300°C
Mass of Aluminum,
ma = 150 g
Initial temperature,
ta = 12.0°C
Mass of water,
mw = 820 g
Initial temperature,
tw = 12.0°C
Now,
The heat received in equivalent to heat given by copper.
The quantity of heat = [tex]m\times s\times t \ J[/tex]
then,
⇒ [tex]245\times .013\times (300-T) = 150\times .9\times (T-12.0) + 820\times 4.2\times (T-12.0)[/tex]
⇒ [tex]3.185(300-T) = 135(T-12.0) + 3444(T-12.0)[/tex]
⇒ [tex]955.5-3.185T=135T-1620+3444T-41328[/tex]
⇒ [tex]43903.5 = 3582.185 T[/tex]
⇒ [tex]T = 12.25^{\circ} C[/tex]
What is the major product in this reaction
Answer:
I think option A is right answer
g A high altitude balloon is filled with 1.41 x 104 L of hydrogen gas (H2) at a temperature of 21oC and a pressure of 745 torr. What is the volume of the balloon at a height of 20 km, where the temperature is -48oC and the pressure is 63.1 torr
Answer:
1.27 × 10⁵ L
Explanation:
Step 1: Given data
Initial pressure (P₁): 745 TorrInitial volume (V₁): 1.41 × 10⁴ LInital temperature (T₁): 21 °CFinal pressure (P₂): 63.1 TorrFinal volume (V₂): ?Final temperature (T₂): -48 °CStep 2: Convert the temperatures to the Kelvin scale
We will use the following expression.
K = °C + 273.15
K = 21 °C + 273.15 = 294 K
K = -48 °C + 273.15 = 225 K
Step 3: Calculate the final volume of the balloon
We will use the combined gas law.
P₁ × V₁ / T₁ = P₂ × V₂ / T₂
V₂ = P₁ × V₁ × T₂/ T₁ × P₂
V₂ = 745 Torr × 1.41 × 10⁴ L × 225 K/ 294 K × 63.1 Torr
V₂ = 1.27 × 10⁵ L
Identify the oxidation half-reaction for this reaction:
Fe(s) + 2HCl(aq) → FeCl2(aq) + H2(g)
A. Fe2+ + 2e → Fe(s)
O B. H2(g) → 2H+ + 2e
O C. Fe(s) → Fe2+ + 2e
O D. 2H+ + 2e → H2(9)
Answer:
Fe(s)->Fe2+2e-
Explanation:
A.p.e.x
The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct
What is Oxidation reaction ?Oxidation reaction is a chemical reaction which can be described as follows ;
Addition of oxygen Removal of hydrogen Loss of ElectronAddition of electronegative atomRemoval of Electropositive elementIn the given reaction ;
Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)
Fe at RHS got converted to Fe²⁺ state at LHS which shows the gain of electron by Fe with in the reaction.
Therefore,
The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct
Learn More about redox reaction here ;
https://brainly.com/question/13978139
#SPJ2
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon.
The question is incomplete, the complete question is;
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon
a) electronic excitation
b) bond breakage
c) molecular vibration
d) molecular rotation
Answer:
molecular rotation
Explanation:
Microwaves are part of the electromagnetic spectrum. They are lower energy, lower frequency radiation.
When molecules absorb infrared radiation, they transition between the rotational states of the molecule.
Hence, the highest energy molecular process that occurs when a molecule absorbs a microwave photon is molecular rotation.
2.50 L of 0.700 M phosphoric acid reacts with 5.25 moles of sodium hydroxide. How many moles of hydrogen ions will completely neutralize the moles of hydroxide ions present in this amount of sodium hydroxide? a) 0.583 b) 1.75 c) 3.00 d) 15.75 e) 5.25
Answer:
5.25 moles of protons. Option e
Explanation:
Reaction between phosphoric acid and sodium hydroxide is neutralization.
We can also say, we have an acid base equilibrium right here:
H₃PO₄ + 3NaOH → Na₃PO₄ + 3H₂O
Initially we have 5.25 moles of base.
We have data from the acid, to state its moles:
M = mol/L, so mol = M . L
mol = 1.75 moles of acid
If we think in the acid we know:
H₃PO₄ → 3H⁺ + PO₄⁻³
We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)
If we have 1.75 moles of acid, we may have
(1.75 . 3) /1 = 5.25 moles of protons
These moles will be neutralized by the 5.25 moles of base
H₃O⁺ + OH⁻ ⇄ 2H₂O Kw
In a titration of a weak acid and a strong base, we have a basic pH
What is true about the properties of liquids and gases?
Gas particles are much more densely packed than liquid particles.
The crystal lattice structure of liquids is more defined than in gases.
Liquids form amorphous crystals while gases do not.
There are strong intermolecular forces between particles that make up liquids, but not gases.
Answer:
There are strong intermolecular forces between particles that make up liquids, but not gases.
Explanation:
Solids, liquids and gases are the three states of matter that exists. However, they possess varying properties that distinguishes them from one another. One of these properties is the strength of the intermolecular forces that hold their molecules together.
The intermolecular forces of each state of matter becomes weak in this order: solid>liquid>gas.
- Intermolecular forces in solid molecules are very strong, hence making them compact and well attached to each other.
- Intermolecular forces in liquid molecules are not too strong, hence, cannot exist in a fixed position but tend to flow.
- Intermolecular forces in gaseous molecules are very weak, hence, gases can move easily and rapidly in any given space.
why beta carbon hydrogen is easily replaceable but not alpha carbon hydrogen
Answer:
Four common types of reactions involving carbonyl reactions: 1) nucleophilic addition; 2) nucleophilic acyl substitution; 3) alpha substitution; 4) carbonyl condensations. The first two were previously discussed and the second two involve the properties of the carbon directly adjacent to the carbonyls, α carbons.
Alpha-substitution reactions results in the replacement of an H attached to the alpha carbon with an electrophile.
The nucleophile in these reactions are new and called enols and enolates.
Explanation:
The carbon in the carbonyl is the reference point and the alpha carbon is adjacent to the carbonyl carbon.
Hydrogen atoms attached the these carbons denoted with Greek letters will have the same designation, so an alpha hydrogen is attached to an alpha carbon.
Aldehyde hydrogens not given Greek leters.
α hydrogens display unusual acidity, due to the resonance stabilization of the carbanion conjugate base, called an enolate.
Tautomers are readily interconverted constitutional isomers, usually distinguished by a different location for an atom or a group, which is different than resonance.
The tautomerization in this chapter focuses on the carbonyl group with alpha hydrogen, which undergo keto-enol tautomerism.
Keto refers to the tautomer containing the carbonyl while enol implies a double bond and a hydroxyl group present in the tautomer.
The keto-enol tautomerization equilibrium is dependent on stabilization factors of both the keto tautomer and the enol tautomer, though the keto form is typically favored for simple carbonyl compounds.
The 1,3 arrangement of two carbonyl groups can work synergistically to stabilize the enol tautomer, increasing the amount present at equilibrium.
The positioning of the carbonyl groups in the 1,3 arrangement allows for the formation of a stabilizing intramolecular hydrogen bond between the hydroxyl group of the enol and the carbonyl oxygen as well as the alkene group of the enol tautomer is also conjugated with the carbonyl double bond which provides additional stabilization.
Aromaticity can also stabilize the enol tautomer over the keto tautomer.
Under neutral conditions, the tautomerization is slow, but both acid and base catalysts can be utilized to speed the reaction up.
Biological enol forming reactions use isomerase enzymes to catalyze the shifting of a carbonyl group in sugar molecules, often converting between a ketose and an aldose in a process called carbonyl isomerization.
How many atoms are in .45 moles of P4010
Answer:
5×6.02×1023
Explanation:
there are 5×6.02×1023 molecules of p4010 in 5mole. there are four P atoms in a single molecule of p4010
A molecule of acetone and a molecule of propyl aldehyde are both made from 3 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The molecules differ in their arrangement of atoms. How do formulas for the two compounds compare? Both compounds have the same molecular formula, but have unique structural formulas. Both compounds have unique molecular formulas and structural formulas. Both compounds have the same structural formula, but have unique molecular formulas.
Explanation:
The structures of both acetone and propanal are shown below:
In the formula of propanal there is -CHO functional group at the end.
In acetone -CO- group is present in the middle that is on the second carbon.
The molecular formula is C3H6O.
Both have same molecular formula but different structural formulas.
Balance the following chemical equation.
CCl4 -> ___ C+ ___ Cl2
Answer:
Explanation:
CCl4 => C + 2Cl2
A rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. If the mass of the plastic rectangle is 64.6 g, what is its density in g/mL?
Answer:
0.92g/mL
Explanation:
Density of a substance is calculated as follows:
Density = mass (m) ÷ volume (V)
According to this question, a rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. Using the formula; L × W × H, the volume of the plastic can be calculated
V = L × W × H
V = 8.8 × 4.2 × 1.9
V = 70.2cm³
The mass of the plastic is 64.6g, hence, its density is:
Density = 64.6g ÷ 70.2cm³
Density of the rectangular plastic = 0.92g/cm³ or 0.92g/mL
Classify each molecule as an alcohol, ketone, or aldehyde based on its name. Propanone (acetone) Choose... Ethanal Choose... 3-phenyl-2-propenal Choose... Butanone Choose... Ethanol Choose... 2-propanol Choose...
Answer:
1.) Propanone (ketone)
2.) Ethanal( aldehyde)
3.) 3-phenyl-2-propenal (aldehyde)
4.) Butanone (ketone)
5.) Ethanol ( alcohol)
6.) 2-propanol (alcohol)
Explanation:
In organic chemistry, ALCOHOL ( also known as alkanol) are compounds in which hydroxyl groups are linked to alkyl groups. They can be considered as being derived from the corresponding alkanes by replacing the hydrogen atoms with hydroxyl groups. The hydroxyl group is the functional group of the alcohol as it is responsible for their characteristic chemical properties. A typical example of alcohol is ethanol and 2-propanol.
Alkanals or ALDEHYDES have the general formula RCHO while alkanones or KETONES have the general formula RR'CO where R and R' may be alkyl or aryl groups. The main similarity between these two classes of compounds is the presence of the carbonyl group. In aldehydes, there is a hydrogen atom attached to the carbon In the carbonyl group while there is none on the ketones.
Some common examples of ketones are Propanone, Butanone while examples of aldehydes are Ethanal and 3-phenyl-2-propenal
Calculate the molarity of a 17.5% (by mass) aqueous solution of nitric acid. Select one: a. 2.74 m b. 4.33 m c. 0.274 m d. 3.04 m e. The density of the solution is needed to solve the problem.
Answer:
Option e.
Explanation:
Molarity is the concentration that indicates moles of solute in 1 L of solution.
We have another concentration, percent by mass.
Percent by mass indicates mass of solute in 100 g of solution.
Our solute is HNO₃, our solvent is water.
17.5 g of nitric acid is the mass of solute. We can convert them to moles:
17.5 g . 1mol / 63g = 0.278 moles
We do not have volume of solution. We assume the mass is 100 g because the percent by mass but we need density to state the volume.
Density = Mass / Volume
Mass / Density = Volume
Once we have the volume, we need to be sure the units is in L, to determine molarity
M = mol /L
A hypothetical A-B alloy of composition 53 wt% B-47 wt% A at some temperature is found to consist of mass fractions of 0.5 for both and phases. If the composition of the phase is 92 wt% B-8 wt% A, what is the composition of the phase
Answer:
the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
Explanation:
Given the data in the question;
Co = 53 or [ 53 wt% B-47 wt% A ]
W∝ = 0.5 = Wβ
Cβ = 92 or [ 92 wt% B-8 wt% A ]
Now, lets set up the Lever rule for W∝ as follows;
W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]
so we substitute our given values into the expression;
0.5 = [ 92 - 53 ] / [ 92 - C∝ ]
0.5 = 39 / [ 92 - C∝ ]
0.5[ 92 - C∝ ] = 39
46 - 0.5C∝ = 39
0.5C∝ = 46 - 39
0.5C∝ = 7
C∝ = 7 / 0.5
C∝ = 14 or [ 14 wt% B-86 wt% A ]
Therefore, the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
C. A sample may contain any or all of the following ions Hg2 2, Ba 2, and Al 3. 1) No precipitate forms when an aqueous solution of NaCl was added to the sample solution. 2) No precipitate forms when an aqueous solution of Na2SO4 was added to the sample. 3) A precipitate forms when the sample solution was made basic with NaOH. Which ion or ions were present. Write the net ionic equation(s) for the the reaction (s).
Answer:
Al^3+
Explanation:
Solubility rules tell us what substances are soluble in water. Since NaCl was added and no precipitate was observed, the mercury II ion is absent.
Addition of Na2SO4 does not form a precipitate meaning that Ba^2+ is absent.
If a precipitate is formed when NaOH is added, the the ionic reaction is as follows;
Al^3+(aq) + 3 OH^-(aq) ------> Al(OH)3(s)
Help!!!!!!!!!
I'm using plato
Answer:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Explanation:
Hey there!
In this case, according to the given information, we can firstly bear to mind the fact that each ball color represents a different element, for that reason we can tell the following:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Regards!
9. How can you separate sugar from a sugar solution contained in a glass without taste? Explain
Answer:
See explanation
Explanation:
Sugar is a polar crystalline substance. The sugar crystal is capable of dissolving in water since it is polar.
When sugar dissolves in water, a sugar solution is formed. If I want to separate the sugar from the water in the solution, I have to boil the solution to a very high temperature.
When I do that, the water in the sugar solution is driven off and the pure sugar crystal is left behind.
The reversible reaction: 2SO2(g) O2(g) darrow-tn.gif 2SO3(g) has come to equilibrium in a vessel of specific volume at a given temperature. Before the reaction began, the concentrations of the reactants were 0.060 mol/L of SO2 and 0.050 mol/L of O2. After equilibrium is reached, the concentration of SO3 is 0.040 mol/L. What is the equilibrium concentration of O2
Answer:
[tex][O_2]_{eq}=0.030M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing out the mathematical expression for the concentration of oxygen at equilibrium, given the initial one and the change due to the reaction extent:
[tex][O_2]_{eq}=0.050M-x[/tex]
Whereas [tex]x[/tex] can be found considering the equilibrium of SO3:
[tex][SO_3]_{eq}=2x=0.040M[/tex]
Which means:
[tex]x=\frac{0.040M}{2} =0.020M[/tex]
Thus, the equilibrium concentration of oxygen gas turns out:
[tex][O_2]_{eq}=0.050M-0.020M=0.030M[/tex]
Regards!
2. How many joules of heat are released when 32g of water cools down from 71%
specific heat of water is 4.184 J/gºC)
How many kilojoules is this?
he says he doesnt know sorry
How many atom in protons
Answer:
Its atomic number is 14 and its atomic mass is 28. The most common isotope of uranium has 92 protons and 146 neutrons. Its atomic number is 92 and its atomic mass is 238 (92 + 146).
You will observe a weak acid-strong base titration in this experiment. Select all statements that are true about weak acid-strong base titrations.
A. Weak acid-strong base titrations always start at a higher pH than strong acid-strong base titrations, no matter the initial concentration.
B. The pH is less than 7 at the equivalence point.
C. The pH is greater than 7 at the equivalence point.
D. Half way to the equivalence point, a buffer region is observed.
Answer:
The pH is greater than 7 at the equivalence point.
Explanation:
Equivalence point is the point where the acid reacts with the base as stipulated in the equation of the reaction.
When a weak acid and a strong base are titrated, the pH of the solution at equivalence point is actually found to be around about pH ~ 9.
Hence, for a weak acid and strong base titration, The pH is greater than 7 at the equivalence point.
A titration between a weak acid and a strong base yields a solution whose pH is greater than 7 at the equivalence point.
What are weak acids?Weak acids are acids which only ionize partially in aqueous solutions.
When weak acids are dissolved in water, they produce only few hydrogen ions.
A strong base on the other hand ionizes completely to produce hydroxide ions in aqueous solutions.
The titration of a weak acid and a strong base gives a solution whose pH is greater than 7 at equivalence point.
Learn more about equivalence point at: https://brainly.com/question/18933025
complete the following steps.
Remember to follow lower numbered rules first.
Na2CO3(aq) + Pb(OH)2(aq) → NaOH (?) + PbCO3(?)
a. Write a balanced chemical equation. (1 pt)
b. If a reaction occurs, write the balanced
chemical equation with the proper states of matter
(i.e. solid, liquid, aqueous) filled in. If no reaction
occurs, write “No reaction.” (1 pt)
c. If a reaction occurs, write the net ionic equation
for the reaction. If no reaction occurs, write "no
reaction.” (1 pt)
Answer:
See explanation
Explanation:
a) The balanced reaction equation is;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3
b) When we include states of matter;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)
c) Complete ionic equation;
2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)
Net Ionic equation;
Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)
How many electrons are shown in the following electron
configuration: 1s22s22p63s 23p64s23d104p65s24d105p66s2 ?
Express your answer numerically as an integer.
Answer:
1s22s22p6
Explanation:
Neon is an element in the periodic table and has an atomic number of 10, which means it has 10 protons in its nucleus and thus since the number of protons and electrons is the same then it has 10 electrons.
Therefore, it has 2 electrons in the first energy shell and 8 electrons in the second energy shell. To elaborate further, the first shell has a single s-sub shell that contains a single s-orbital that can hold two electrons. The second energy shell has a single s-sub-shell whose s-orbital will occupy 2 electrons, and also has a p-orbital which can hold 6 electrons, making the second shell to have 8 electrons.
Which statement is true with respect to standard reduction potentials?
SRP values that are greater than zero always represent a reduction reaction.
SRP values that are less than zero always represent a reduction reaction.
Half-reactions with SRP values greater than zero are spontaneous.
Half-reactions with SRP values greater than zero are nonspontaneous.
Answer:
C). Half-reactions with SRP values greater than zero are spontaneous.
Explanation:
SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.
The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.
CAN HF USED TO CLEAVE ETHERS EXPLAIN
Answer:
no
Explanation:
Fluoride is not nucleophilic (having the tendency to donate electrons) enough to allow for the use of HF to cleave ethers in protic media(protic solvents are polar liquid compounds that have dissociable hydrogen atoms). The rate of reaction is comparably low, so that heating of the reaction mixture is required.
A sample of oxygen gas has a volume of 89.6 L at STP. How many moles of oxygen gas are present ?
Answer:
89,6/22,4 =4(mol)
Explanation:
There are approximately 1.089 moles of oxygen gas present in the sample at STP.
At STP (Standard Temperature and Pressure), the conditions are defined as follows:
Temperature (T) = 0 degrees Celsius = 273.15 Kelvin
Pressure (P) = 1 atmosphere (atm) = 101.325 kPa = 1013.25 hPa
Now, to find the number of moles of oxygen gas (O2) present in the sample, we can use the ideal gas law:
PV = nRT
Where:
P = pressure (in atm)
V = volume (in liters)
n = number of moles
R = ideal gas constant = 0.0821 L.atm/(mol.K)
T = temperature (in Kelvin)
Given:
V = 89.6 L (volume at STP)
T = 273.15 K (STP temperature)
Let's plug in the values and solve for n (number of moles):
n = PV / RT
n = (1 atm) × (89.6 L) / (0.0821 L.atm/(mol.K) × 273.15 K)
n = 1.089 moles
So, there are approximately 1.089 moles of oxygen gas present in the sample at STP.
To know more about oxygen gas:
https://brainly.com/question/31842859
#SPJ2
Si enfriamos mercurio de 100C. Calcular la cantidad de calor que se debe restar sabiendo que la masa de mercurio es de 1800gr
Answer:
I do not speak Spanish.
Explanation:
2. 27.8 mL of an unknown were added to a 50.0-mL flask that weighs 464.7 g. The total mass of the flask and the liquid is 552.4 g. Calculate the density of the liquid in Lbs/ in3.
Answer:
[tex]d=4.24x10^{-4}\frac{lb}{in^3}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to set the equation for the calculation of density and mass divided by volume:
[tex]d=\frac{m}{V}[/tex]
Thus, we can find the mass of the unknown by subtracting the total mass of the liquid to the mass of the flask and the liquid:
[tex]m=552.4g-464.7g=87.7g[/tex]
So that we are now able to calculate the density in g/mL first:
[tex]d=\frac{87.7g}{27.8mL}=3.15g/mL[/tex]
Now, we proceed to the conversion to lb/in³ by using the following setup:
[tex]d=3.15\frac{g}{mL}*\frac{1lb}{453.6g}*\frac{1in^3}{16.3871mL}\\\\d=4.24x10^{-4}\frac{lb}{in^3}[/tex]
Regards!
