Calculate the area of the shaded segments in the following diagrams. (a) 12 cm 40° (b) 58° 16 cm ​

Therefore , the solution of the given problem of standard deviation comes out to be option C with n = 1,000 and p near to 1/2 is the right response.

Statistics uses variance as a way to quantify difference. The image of the result is used to compute the average deviation between the collected data and the mean. Contrary to many other valid measures of variability, it includes those pieces of data on their own by comparing each number to the mean. Variations may be caused by willful mistakes, irrational expectations, or shifting economic or business conditions.

Here,

The following algorithm determines the standard deviation of the sampling distribution of a sample proportion p:

=> √((p*(1-p))/n)

where n is the sample size, and p is the population percentage.

For the sampling distribution of a sample proportion p,

the pair of sample number n and population proportion p that would result in the highest standard deviation is:

=>n =1,000, and p is almost half.

Because p=1/2

yields the highest possible value of the expression (p*(1-p)), a bigger sample size will result in a smaller standard deviation.

The standard deviations will be lower for the other choices, which have smaller sample sizes or extreme values of p.

Therefore, (C) with n = 1,000 and p near to 1/2 is the right response.

To know more about standard deviation visit :-

brainly.com/question/13673183

#SPJ1

1. The total yards of each fabric that Karina will buy to make a quilt is as follows:

a) Green Fabric = 12 square yards

b) Burgundy Fabric = 19 square yards

2. The total yards of fabric she will buy is 31 square yards.

The total yards of fabric can be determined by unit conversion using division operation.

Given that 36 inches = 1 yard, the square inches of fabric are converted to square yards by dividing the total by 36.

The total number of green fabric Karina requires = 420 square inches

= 12 square yards (420/36)

The total number of burgundy fabric Karina requires = 688 square inches

= 19 square yards (688/36)

The total number of fabric (green and burgundy) = 1,108 square inches (420 + 688)

36 inches = 1 yard

1,108 inches = 30.78 square yards (1,108/36)

= 31 square yards or (12 + 19)

Learn more about unit conversions at https://brainly.com/question/174910.

#SPJ1

Step 1: Arrange the arrays so that A and B are in the same order: A = [ 1 2 4 0 5 6 ], B = [ 7 3 2 5 1 9]

Step 2: To find C = A+B, add each element of A and B together.

C = [1+7, 2+3, 4+2, 0+5, 5+1, 6+9]

C = [8, 5, 6, 5, 6, 15]

Step 3: To find D = A-B, subtract each element of B from A.

D = [1-7, 2-3, 4-2, 0-5, 5-1, 6-9]

D = [-6, -1, 2, -5, 4, -3]

The given statement "Star clusters with lots of bright, blue stars of spectral type O and B are generally younger than clusters that don't have any such stars." is True. The reason for this is that O and B stars are short-lived and burn through their fuel quickly.

The reason for this is that O and B stars burn through their fuel quickly, causing them to exhaust their nuclear fuel and end their lives in a relatively short period, typically within a few tens of millions of years.

On the other hand, stars of lower mass and cooler temperatures, like G and K type stars like our sun, have longer lifetimes and take billions of years to exhaust their nuclear fuel.

Therefore, clusters without any bright, blue stars are likely to have evolved for longer periods, allowing these short-lived stars to have already expired.

To know more about Star clusters:

https://brainly.com/question/30899528

#SPJ4

The standard normal areas are given as follows:

The z-score of a measure X of a normally distributed variable that has mean represented by [tex]\mu[/tex] and standard deviation represented by [tex]\sigma[/tex] is obtained by the equation presented as follows:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

Considering the second bullet point, the areas are given as follows:

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ1

Graph D of the given function has the smallest value for b.

As per name signifies, exponents are used in exponential functions. But take note that an exponential function does not have a constant as its base and a variable as its exponent. One of the following forms can be used for an exponential function.

f (x) = aˣ

y=f(x) >0

f(x)=abˣ , where a>0

So, f(x)=abˣ

When, b<1 f(x) decreases

When, b>1 f(x) increases and the larger the b the steeper the graph

So, graph of D is increasing and is steepest

So, graph D has the smallest value for b.

To know more about variable, visit

https://brainly.com/question/17344045

#SPJ1

i) Find the mean, median, and mode of the frequency table as follows:

ii) The average that justifies the teacher's statement congratulating the class that 'over three quarters were above average' is the average mark of 10, which is 5.

The mean refers to the average or the quotient of the total values divided by the number of items.

The median is the middle value in the data, which occurs with marks 8 for the 13th and 14th students.

The mode is the value that occurs most frequently, which is 3 which occurs 6 times.

Frequency Table:

Mark   Frequency  Cumulative Frequency

3              6                            18 (0 + 3 x 6)

4              3                            30 (18 + 4 x 3)

5              1                            35 (30 + 5 x 1)

6              2                           47 (35 + 6 x 2)

7              0                           47 (47 + 7 x 0)

8              5                           87 (47 + 8 x 5)

9              5                         132 (87 + 9 x 5)

10            4                         172 (132 + 10 x 4)

Mean = 6.6 (172/26)

Median = 8

Mode = 3

Learn more about the mean, median, and mode at https://brainly.com/question/452652.

#SPJ1

The value of h(x) using exponents are as follows:

For -1, the value of h(x)=1/10

For 0, the value of h(x) = 1

For 1, the value of h(x) = 10

For 2, the value of h(x) = 100

For 3, the value of h(x) = 1000

The exponent of a number tells us how many times the original value has been multiplied by itself. For instance, 2×2×2×2 can be expressed as [tex]2^{4}[/tex] the result of 4 times multiplying 2 by itself. Thus, 4 is referred to as the "exponent" or "power," while 2 is referred to as the "base."

Generally speaking, [tex]x^{n}[/tex] denotes that x has been multiplied by itself n times. Here x is the base and n is the power.

Now here, as we put the value of x in the equation, h(x) we can get the value of h(x) for each value of x.

So,

For -1, the value of h(x)=1/10

For 0, the value of h(x) = 1

For 1, the value of h(x) = 10

For 2, the value of h(x) = 100

For 3, the value of h(x) = 1000

To know more about exponents, visit:

https://brainly.com/question/30066987

#SPJ1

Answer:

According to the scale, 1 inch on the drawing represents 1.5 feet in real life. So, to find the actual length of the door, we need to multiply the length on the drawing by the scale factor:

4 inches x 1.5 feet/inch = 6 feet

Similarly, to find the actual width of the door, we need to multiply the width on the drawing by the scale factor:

7 inches x 1.5 feet/inch = 10.5 feet

Therefore, the actual measurements of the door are 6 feet by 10.5 feet.

The average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] are 2, -1.5, 1, and -1.5, respectively.

It expresses how much the function changed per unit on average during that time period. It is computed by taking the slope of the straight line connecting the interval's endpoints on the function's graph.

To calculate the average rate of change for the intervals shown in the graph, we must first determine the slope of the line connecting the endpoints of each interval.

0-3 interval:

Because the interval's endpoints are (0, 1) and (3, 7), the slope of the line connecting them is:

slope = (y change) / (x change) = (7 - 1) / (3 - 0) = 2

pauses [3, 5]:

Because the interval's endpoints are (3, 7) and (5, 4), the slope of the line connecting them is:

slope = (y change) / (x change) = (4 - 7) / (5 - 3) = -1.5

[5–7] Interval:

Because the interval's endpoints are (5, 4) and (7, 6), the slope of the line connecting them is:

slope = (y change) / (x change) = (6 - 4) / (7 - 5) = 1

Interval 7 and 9:

Because the interval's endpoints are (7, 6) and (9, 3), the slope of the line connecting them is:

slope = (y change) / (x change) = (3 - 6) / (9 - 7) = -1.5

As a result, the average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] is 2, -1.5, 1, and -1.5.

To know more about Average Rate visit:

https://brainly.com/question/23715190

#SPJ1

Answer: 13,708 ft

Step-by-step explanation:

To find the difference in elevation between the mountain and the valley, we need to subtract the elevation of the valley from the elevation of the mountain:

13,318 ft (mountain) - (-390 ft) (valley) = 13,318 ft + 390 ft = 13,708 ft

Therefore, the difference in elevation between the mountain and the valley is 13,708 ft.

Answer: The difference is 13,708 ft.

Given that a mountain is 13,318 feet above sea level. So the elevation of the mountain is [tex]= +13,318 \ \text{ft}[/tex].

Given that a valley is 390 feet below sea level.

So the elevation of the valley is [tex]= -390 \ \text{ft}[/tex].

So the difference between them is [tex]= 13,318 - (-390) = 13,318 + 390 = 13,708 \ \text{ft}.[/tex]

Learn more: https://brainly.com/question/20521181

(a) The function x as a function of t is t = 250ln(499x/998)

(b) Half the population will have heard the rumor approximately 109.86 units of time after it was started.

(a) To solve the differential equation dt/dx = kx(N−x), we can separate the variables and integrate

dt/dx = kx(N−x)

dt/(N-x) = kx dx

Integrating both sides, we get

t = -1/k × ln(N-x) - 1/k × ln(x) + C

where C is the constant of integration.

To find C, we can use the initial condition that two people start the rumor at t=0, so x=2:

0 = -1/k * ln(N-2) - 1/k * ln(2) + C

C = 1/k * ln(N-2) + 1/k * ln(2)

Substituting C back into the equation, we get:

t = -1/k * ln(N-x) - 1/k * ln(x) + 1/k * ln(N-2) + 1/k * ln(2)

Simplifying, we get

t = 1/k * [ln((N-2)x/(2(N-x)))]

Substituting k=1/250 and N=1000, we get:

t = 250ln(499x/998)

(b) We want to find the time t when half the population has heard the rumor, so x = N/2 = 500. Substituting this into the equation we obtained in part (a), we get

t = 250ln(499(500)/998) = 250ln(249/499)

t ≈ 109.86

Therefore, half the population will have heard the rumor approximately 109.86 units of time after it was started.

Learn more about differential equation here

brainly.com/question/29199325

#SPJ4

The code segment that assigns bonus correctly for all possible integer values of score is D, which uses nested if statements to implement the game's rules for assigning a value to bonus based on the value of score.

The code segment that assigns bonus correctly for all possible integer values of score is D:

IF(score < 50)

{

   bonus ← Ø

}

ELSE

{

   IF (score > 100)

   {

       bonus ← score (10)

   }

   ELSE

   {

       bonus ← score

   }

}

This code segment correctly implements the rules for assigning a value to bonus based on the value of score. It first checks if score is less than 50, and if so, it assigns 0 to bonus. If score is greater than or equal to 50, it checks if score is greater than 100, and if so, it assigns 10 times score to bonus. Otherwise, it assigns score to bonus. This covers all possible integer values of score and ensures that bonus is assigned correctly according to the game's rules.

Learn more about integer here: brainly.com/question/15276410

#SPJ4

Complete question is in the image attached below

The function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

Function in mathematics is a relation between two sets, where one set is the input and the other set is the output. Functions are an important tool in mathematics and can be used to describe and model real-world phenomena. Functions take inputs, manipulate them and produce outputs. They can be used to represent relationships between two or more variables, or to represent a complex process. Functions allow us to break down complex problems into smaller, more manageable pieces and to study how changes in one variable affect other variables.

The function represented by the table is linear. It can be determined by the fact that the y-values change by the same amount every time the x-values increase by one unit. In this case, the y-values decrease by 2 each time the x-values increase by one unit. This is an example of a linear function.

Linear functions have the shape of a straight line and are characterized by having a constant rate of change. The constant rate of change is represented by the slope of the line, which in this case is -2. This means that for every one unit increase in the x-values, the y-values decrease by two.

A quadratic function is the opposite of a linear function, as it has a rate of change that is not constant. Quadratic functions are characterized by their parabolic shape and their rate of change increases as x-values increase. Exponential functions are characterized by their curved shape and increase exponentially as x-values increase.

In conclusion, the function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

To know more about function click-
https://brainly.com/question/25841119
#SPJ1

Probability that precisely 5 people will respond that they would feel comfortable is 0.0808

Probability that more than 5 people will respond that they would feel comfortable is0.1061

Probability that at most 5 people will respond that they would feel comfortable is 0.9747

Probability is a way to gauge how likely something is to happen. Several things are difficult to forecast with absolute confidence.

35 percent of households claim that having $50,000 in savings would make them feel comfortable. Ask 8 homes that were chosen at random if they would feel comfortable if they had $50,000 in savings.

Binomial conundrum with p(secure) = 0.35 and n = 8.

the likelihood that the number of people who claim they would feel comfortable is

(a) The number exactly five is equal to ⁸C₅ (0.35)5×(0.65)×3=binompdf(8,0.35,5) = 0.0808.

(b) more than five = 1 - binomcdf(8,0.35,4) = 0.1061

(c) at most five = binomcdf(8,0.35,5) = 0.9747.

to know more about  forecast, visit:

https://brainly.com/question/28839529

#SPJ1

Answer: We are given that the readings at freezing on a batch of thermometers are normally distributed with a mean of 0°C and a standard deviation of 1.00°C.

To find the probability of obtaining a reading between 0°C and 1.08°C, we need to calculate the z-scores for these values using the formula:

z = (x - mu) / sigma

where x is the value we are interested in, mu is the mean, and sigma is the standard deviation.

For x = 0°C, we have:

z1 = (0 - 0) / 1.00 = 0

For x = 1.08°C, we have:

z2 = (1.08 - 0) / 1.00 = 1.08

Using a standard normal table or a calculator, we can find the probability of obtaining a z-score between 0 and 1.08.

Using a standard normal table or a calculator, we find that the probability of obtaining a z-score between 0 and 1.08 is 0.3583.

Therefore, the probability of obtaining a reading between 0°C and 1.08°C is 0.3583, rounded to 4 decimal places.

Step-by-step explanation:

Answer:

We have two equations:

√x +2y^2 = 15 ----(1)

√4x - 4y^2=6 ----(2)

Let's solve for x:

From (1), we have:

√x = 15 - 2y^2

Squaring both sides, we get:

x = (15 - 2y^2)^2

Expanding, we get:

x = 225 - 60y^2 + 4y^4

From (2), we have:

√4x = 6 + 4y^2

Squaring both sides, we get:

4x = (6 + 4y^2)^2

Expanding, we get:

4x = 36 + 48y^2 + 16y^4

Substituting the expression for x from equation (1), we get:

4(225 - 60y^2 + 4y^4) = 36 + 48y^2 + 16y^4

Simplifying, we get:

900 - 240y^2 + 16y^4 = 9 + 12y^2 + 4y^4

Rearranging, we get:

12y^2 - 12y^4 = 891

Dividing both sides by 12y^2, we get:

1 - y^2 = 74.25/(y^2)

Multiplying both sides by y^2, we get:

y^2 - y^4 = 74.25

Let z = y^2. Substituting, we get:

z - z^2 = 74.25

Rearranging, we get:

z^2 - z + 74.25 = 0

Using the quadratic formula, we get:

z = (1 ± √(1 - 4(1)(74.25))) / 2

z = (1 ± √(-295)) / 2

Since the square root of a negative number is not real, there are no real solutions for z, which means there are no real solutions for y and x.

Therefore, the answer is "no solution".

Uri paid a total of $85.47 for the landscaping service including tax and tip.

Taxes are compulsory payments made by a government organisation, whether local, regional, or federal, to people or businesses. Tax revenues are used to fund a variety of government initiatives, such as Social Security and Medicare as well as public infrastructure and services like roads and schools. Taxes are borne by whoever bears the cost of the tax in economics, whether this is the entity being taxed, such as a business, or the final users of the items produced by the firm. Taxes should be taken into consideration from an accounting standpoint, including payroll taxes, federal and state income taxes, and sales taxes.

Given that company charged $74 for the service plus 5% tax.

The tax is 5%, that is:

Tax = 5% of $74 = 0.05 x $74 = $3.70

Cost after tax = $74 + $3.70 = $77.70

Now, tip is 10%:

Tip = 10% of $77.70 = 0.10 x $77.70 = $7.77

Total cost = $77.70 + $7.77 = $85.47

Hence, Uri paid a total of $85.47 for the landscaping service including tax and tip.

Learn more about tax here:

https://brainly.com/question/16423331

#SPJ1

The probability of obtaining a reading less than 0.35° C is approximately 35%.

Accοrding tο the prοbability fοrmula, the likelihοοd οf an event οccurring is equal tο the ratiο οf the number οf favοurable οutcοmes tο the tοtal number οf οutcοmes. Prοbability οf an event οccurring P(E) = The number οf favοurable οutcοmes divided by the tοtal number οf οutcοmes.

The readings at freezing οn a set οf thermοmeters are nοrmally distributed, with a mean (x) οf 0°C and a standard deviatiοn (μ) οf 1.00°C. We want tο knοw hοw likely it is that we will get a reading that is less than 0.35°C.

To solve this problem, we must use the z-score formula to standardise the value:

[tex]$Z = \frac{x - \mu}{\sigma}[/tex]

Z = standard score

x = observed value

[tex]\mu[/tex] = mean of the sample

[tex]\sigma[/tex] = standard deviation of the sample

Here

x = 0.35° C

[tex]\mu[/tex] = 0° C

[tex]\sigma[/tex] = 1.00°C

Using the values on the formula:

[tex]$Z = \frac{0.35 - 0}{1}[/tex]

Z = 0.35

The probability of obtaining a reading less than 0.35° C is approximately 35%.

To know more about probability visit:

brainly.com/question/30719832

#SPJ1

[tex]\begin{cases} x=\frac{2+i\sqrt{2}}{3}\implies 3x=2+i\sqrt{2}\implies 3x-2-i\sqrt{2}=0\\\\ x=\frac{2-i\sqrt{2}}{3}\implies 3x=2-i\sqrt{2}\implies 3x-2+i\sqrt{2}=0 \end{cases} \\\\\\ \stackrel{ \textit{original polynomial} }{a(3x-2-i\sqrt{2})(3x-2+i\sqrt{2})=\stackrel{ 0 }{y}} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{ \textit{difference of squares} }{[(3x-2)-(i\sqrt{2})][(3x-2)+(i\sqrt{2})]}\implies (3x-2)^2-(i\sqrt{2})^2 \\\\\\ (9x^2-12x+4)-(2i^2)\implies 9x^2-12x+4-(2(-1)) \\\\\\ 9x^2-12x+4+2\implies 9x^2-12x+6 \\\\[-0.35em] ~\dotfill\\\\ a(9x^2-12x+6)=y\hspace{5em}\stackrel{\textit{now let's make}}{a=-\frac{1}{9}} \\\\\\ -\cfrac{1}{9}(9x^2-12x+6)=y\implies \boxed{-x^2+\cfrac{4}{3}x-\cfrac{2}{3}=y}[/tex]

The surface area of the surface generated by rotating the curve y = x² about the y-axis, and we found that the surface area is approximately 54.33 square units.

In this case, the curve we want to rotate is y = x², and we want to rotate it about the y-axis. To use the formula above, we need to express the equation of the curve in terms of x. Therefore, we need to rewrite y = x² as x = √y.

Next, we need to find the derivative of x = √y with respect to y, which is:

dx/dy = 1/2√y

Substituting this into the formula for the surface area, we get:

Surface Area = 2π ∫[0,4] √y √(1+(1/2√y)²) dy

Simplifying the expression inside the square root, we get:

Surface Area = 2π ∫[0,4] √(y+(1/4)) dy

We can evaluate this integral using the power rule of integration, which gives:

Surface Area = 2π [2/3(y+(1/4))^(3/2)]₀⁴

Simplifying further, we get:

Surface Area = 2π [2/3(17/4)^(3/2)]

Surface Area ≈ 54.33 square units

Therefore, the surface area of the surface generated by rotating the curve y = x² about the y-axis is approximately 54.33 square units.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

How do you find the area of the surface generated by rotating the curve about the y-axis y = x^2 , 0 ≤ x ≤ 2 ?

The area of the shaded region as a percentage of the area of the sector ONQ= 60.3%

The shape of an equilateral triangle is an equilateral triangle.

The word "Equilateral" is formed by combining two words. H. "Equi" means equal, "lateral" means side.

Equilateral triangles are also called regular polygons or equilateral triangles because all sides are equal.

In geometry, an equilateral triangle is a triangle with all sides of equal length.

Three sides are equal, so three angles on the same side are equal. Therefore, it is also called an equilateral triangle with each angle of 60 degrees.

Like other types of triangles, equilateral triangles have formulas for area, perimeter, and height. 

According to our question-

AB=OA=BO= 9CM

ONQ-AOB/ONQ*100

PUTTING VALUES

60.3%

Hence, The area of the shaded region as a percentage of the area of the sector ONQ= 60.3%

learn more about equilateral triangle click here:

https://brainly.com/question/17264112

#SPJ1

10% chance of contamination by a particular: It's not clear what random variable is being referred to here, but if it's the probability of contamination.

In general terms, a distribution refers to the way something is divided or spread out. In the context of statistics and probability theory, a distribution is a mathematical function that describes the likelihood of different possible outcomes or values that a variable can take.

There are various types of distributions, but some of the most commonly used ones include:

Normal distribution: also known as the Gaussian distribution, it is a continuous probability distribution that is symmetrical around the mean, with most of the data falling within one standard deviation of the mean.

Binomial distribution: this is a discrete probability distribution that describes the likelihood of a certain number of successes in a fixed number of trials.

Poisson distribution: another discrete probability distribution that describes the likelihood of a certain number of events occurring in a fixed interval of time or space.

Exponential distribution: a continuous probability distribution that describes the time between events occurring at a constant rate.

Distributions are essential in statistical analysis as they can help to understand and analyze data, make predictions, and draw conclusions about a population based on a sample of data.

Given by the question.

a. The wages of academician and non-academician workers in UPSI: This random variable can be approximated to a continuous distribution as wages can take on any numerical value within a range. However, it's worth noting that in practice, there may be discrete intervals or categories of wages, in which case a discrete distribution may be more appropriate.

b. The time taken to submit online quiz answer's document: This random variable can also be approximated to a continuous distribution as it can take on any numerical value within a range.

c. The prices of SAMSUNG mobile phones displayed at a phone shop: This random variable can be approximated to a continuous distribution as prices can take on any numerical value within a range.

d. The number of pumps at Shell petrol stations in Perak: This random variable can be approximated to a discrete distribution since the number of pumps can only take on integer values.

To learn more about function:

https://brainly.com/question/21145944

#SPJ1

The probability that, out of 18 independent samples received from one river, just two were contaminated is 0.8438.

In the following 18 samples to be evaluated,

Let X = the number of samples that now the pollutant is present in.

Thus, with p = 0.10 and n = 18, X is a binomial random variable.

Using the binomial theorem:

[tex](^{n} _{r} ) p^{x} q^{n-x}[/tex]

p = 0.10

q = 1 - 0.10 = 0.9

n = 18

The likelihood that only two samples out of 18 obtained in different ways from the same river were polluted

P(x = 2) = [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{18-2}[/tex]

=  [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{16}[/tex]

= 153 x 0.01 x 0.1853

= 0.8438

Thus, the probability that, out of 18 separate samples received from one river, just two were contaminated is 0.8438.

Know more about the independent samples

https://brainly.com/question/12184795

#SPJ1

Answer:

[tex]\dfrac{4096\pi}{5}\approx 2573.593\; \sf (3\;d.p.)[/tex]

Step-by-step explanation:

The shell method is a calculus technique used to find the volume of a solid revolution by decomposing the solid into cylindrical shells. The volume of each cylindrical shell is the product of the surface area of the cylinder and the thickness of the cylindrical wall. The total volume of the solid is found by integrating the volumes of all the shells over a certain interval.

The volume of the solid formed by revolving a region, R, around a vertical axis, bounded by x = a and x = b, is given by:

[tex]\displaystyle 2\pi \int^b_ar(x)h(x)\;\text{d}x[/tex]

where:

[tex]\hrulefill[/tex]

We want to find the volume of the solid formed by rotating the region bounded by y = 0, y = √x, x = 0 and x = 16 about the y-axis.

As the axis of rotation is the y-axis, r(x) = x.

Therefore, in this case:

[tex]r(x)=x[/tex]

[tex]h(x)=\sqrt{x}[/tex]

[tex]a=0[/tex]

[tex]b=16[/tex]

Set up the integral:

[tex]\displaystyle 2\pi \int^{16}_0x\sqrt{x}\;\text{d}x[/tex]

Rewrite the square root of x as x to the power of 1/2:

[tex]\displaystyle 2\pi \int^{16}_0x \cdot x^{\frac{1}{2}}\;\text{d}x[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]

[tex]\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x[/tex]

Integrate using the power rule (increase the power by 1, then divide by the new power):

[tex]\begin{aligned}\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x&=2\pi \left[\dfrac{2}{5}x^{\frac{5}{2}}\right]^{16}_0\\\\&=2\pi \left[\dfrac{2}{5}(16)^{\frac{5}{2}}-\dfrac{2}{5}(0)^{\frac{5}{2}}\right]\\\\&=2 \pi \cdot \dfrac{2}{5}(16)^{\frac{5}{2}}\\\\&=\dfrac{4\pi}{5}\cdot 1024\\\\&=\dfrac{4096\pi}{5}\\\\&\approx 2573.593\; \sf (3\;d.p.)\end{aligned}[/tex]

Therefore, the volume of the solid is exactly 4096π/5 or approximately 2573.593 (3 d.p.).

[tex]\hrulefill[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Power Rule of Integration}\\\\$\displaystyle \int x^n\:\text{d}x=\dfrac{x^{n+1}}{n+1}(+\;\text{C})$\\\end{minipage}}[/tex]

Answer:

Step-by-step explanation:

To calculate the interest earned by Linda for the first year, we can use the formula:

A = P(1 + r/n)^(nt)

Where A is the amount after t years, P is the principal amount, r is the annual interest rate, n is the number of times the interest is compounded per year, and t is the time in years.

For the first year, we have:

A = $50,000(1 + 0.06/1)^(1*1) = $53,000

So, the interest earned by Linda for the first year is:

Interest = $53,000 - $50,000 = $3,000

For the second year, we can use the same formula with t = 2:

A = $50,000(1 + 0.06/1)^(1*2) = $56,180

Interest = $56,180 - $53,000 = $3,180

For the third year, we can use the same formula with t = 3:

A = $50,000(1 + 0.06/1)^(1*3) = $59,468.80

Interest = $59,468.80 - $56,180 = $3,288.80

Now, to calculate the interest earned by Bob for each of the first three years, we can use the formula:

Interest = Prt

Where P is the principal amount, r is the annual interest rate, and t is the time in years.

For the first year, we have:

Interest = $50,0000.061 = $3,000

For the second year, we have:

Interest = $50,0000.061 = $3,000

For the third year, we have:

Interest = $50,0000.061 = $3,000

As we can see, Linda earns more interest than Bob for each year, as her interest is compounded annually, while Bob's interest is simple interest. Therefore, the answer is:

Linda earns more.

Answer:

Linda earns $9550.8 interest and bob earns $9000 interest

Step-by-step explanation:

Linda takes compound interest: C.I. = Principal (1 + Rate)Time − Principal

interest= 50,000(1+6/100)³

=59550.8 - 50000

Linda earns $9550.8 interest in 3 years.

bob takes simple interest: S.I = prt/100

interest = 50,000*6*3/100

Bob earns $9000 in 3 years.

thus, Linda earns more interest than bob.

Answer: 56

Step-by-step explanation:

One possible method to estimate the population of snapping turtles in the area is by using the mark and recapture method, also known as the Lincoln-Petersen index.

According to this method, the population size can be estimated by dividing the number of marked individuals in the second sample by the proportion of marked individuals in the combined sample. In other words:

Estimated population size = (Number of individuals in sample 1 × Number of individuals in sample 2) / Number of marked individuals in sample 2

Using the information provided in the problem, we can fill in the formula as follows:

Estimated population size = (15 × 15) / 4

Estimated population size = 56.25

Rounding to the nearest whole number, we get an estimated population size of 56 snapping turtles in the area.

Answer:

Step-by-step explanation:

2

The direction angle of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is approximately 74.5 degrees clockwise from the positive x-axis in the xy plane.

To calculate the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0), we need to take the negative gradient of the electric potential V:

E = -∇V

where ∇ is the del operator, which is given by:

∇ = i(∂/∂x) + j(∂/∂y) + k(∂/∂z)

and i, j, k are the unit vectors in the x, y, and z directions, respectively.

To calculate the magnitude of the electric field at the point, we first need to find the partial derivatives of V with respect to x and y:

∂V/∂x = 2Axy - By^2

∂V/∂y = Ax^2 - 2Bxy

Substituting the values of A, B, x, and y, we get:

∂V/∂x = 2(5.00 V/m^3)(1.10 m)(0.400 m) - (8.00 V/m^3)(0.400 m)^2 = 0.44 V/m

∂V/∂y = (5.00 V/m^3)(1.10 m)^2 - 2(8.00 V/m^3)(1.10 m)(0.400 m) = -1.64 V/m

Next, we can calculate the magnitude of the electric field:

E = -∇V = -i(∂V/∂x) - j(∂V/∂y) - k(∂V/∂z)

= -i(0.44 V/m) + j(1.64 V/m) + 0k

= (0.44 i - 1.64 j) V/m

The magnitude of the electric field is given by:

|E| = sqrt((0.44 V/m)^2 + (-1.64 V/m)^2) = 1.70 V/m

Therefore, the magnitude of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is 1.70 V/m.

To calculate the direction angle of the electric field, we need to find the angle that the electric field vector makes with the positive x-axis in the xy plane.

The angle can be found using the arctan function:

θ = arctan(Ey/Ex)

Substituting the values of Ex and Ey, we get:

θ = arctan(-1.64 V/m / 0.44 V/m) = -1.30 radians

The negative sign indicates that the direction angle is measured counter clockwise from the negative x-axis, which is equivalent to measuring clockwise from the positive x-axis.

Converting to degrees, we get:

θ = -1.30 radians * (180 degrees / pi radians) = -74.5 degrees

Therefore, the direction angle is approximately 74.5 degrees clockwise in the xy plane.

To know more about electric field:

https://brainly.com/question/14768728

#SPJ4

Answer:

The value of the derivative at (-2/3, 2√3/3) is zero.

Step-by-step explanation:

Given function:

[tex]f(x)=-3x\sqrt{x+1}[/tex]

To differentiate the given function, use the product rule and the chain rule of differentiation.

[tex]\boxed{\begin{minipage}{5.4 cm}\underline{Product Rule of Differentiation}\\\\If $y=uv$ then:\\\\$\dfrac{\text{d}y}{\text{d}x}=u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}$\\\end{minipage}}[/tex]

[tex]\boxed{\begin{minipage}{7 cm}\underline{Differentiating $[f(x)]^n$}\\\\If $y=[f(x)]^n$, then $\dfrac{\text{d}y}{\text{d}x}=n[f(x)]^{n-1} f'(x)$\\\end{minipage}}[/tex]

[tex]\begin{aligned}\textsf{Let}\;u &= -3x& \implies \dfrac{\text{d}u}{\text{d}{x}} &= -3\\\\\textsf{Let}\;v &= \sqrt{x+1}& \implies \dfrac{\text{d}v}{\text{d}{x}} &=\dfrac{1}{2} \cdot (x+1)^{-\frac{1}{2}}\cdot 1=\dfrac{1}{2\sqrt{x+1}}\end{aligned}[/tex]

Apply the product rule:

[tex]\implies f'(x) =u\dfrac{\text{d}v}{\text{d}x}+v\dfrac{\text{d}u}{\text{d}x}[/tex]

[tex]\implies f'(x)=-3x \cdot \dfrac{1}{2\sqrt{x+1}}+\sqrt{x+1}\cdot -3[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-3\sqrt{x+1}[/tex]

Simplify:

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{3\sqrt{x+1} \cdot 2\sqrt{x+1}}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x}{2\sqrt{x+1}}-\dfrac{6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{3x+6(x+1)}{2\sqrt{x+1}}[/tex]

[tex]\implies f'(x)=- \dfrac{9x+6}{2\sqrt{x+1}}[/tex]

An extremum is a point where a function has a maximum or minimum value.

From inspection of the given graph, the maximum point of the function is (-2/3, 2√3/3).

To determine the value of the derivative at the maximum point, substitute x = -2/3 into the differentiated function.

[tex]\begin{aligned}\implies f'\left(-\dfrac{2}{3}\right)&=- \dfrac{9\left(-\dfrac{2}{3}\right)+6}{2\sqrt{\left(-\dfrac{2}{3}\right)+1}}\\\\&=-\dfrac{0}{2\sqrt{\dfrac{1}{3}}}\\\\&=0 \end{aligned}[/tex]

Therefore, the value of the derivative at (-2/3, 2√3/3) is zero.