Answer:
it can be stored overtime
Explanation:
List three (3) distinctions between limited liability partnership and conventional partnership using statute and decided cases.
If you're operating as a limited partnership, the general partner has unlimited liability for company losses and debts, while a limited partner has limited liability protection against company debts and losses. ... In an LLP, all partners have limited liability protection against company obligations and debts.
If you want to melt a rock, even partially, there are three methods you can employ. Which of the following is not a way that melting is triggered in rocks in the Earth?
a. adding water
b. adding heat
c. releasing pressure
d. removing water
Answer:
D
Explanation:
There are three basic ways that rocks melt to form the lavas that erupt from volcanoes: decompression, addition of volatiles, and conduction.
but the question asked "which of the following is NOT a way"I hope this helped! have a great day!Nancy is responsible for recording workplace injuries in the OSHA (Occupational Safety and Health Administration) 300 log. Which of the following workplace injuries is exempted from being recorded for OSHA?
Marked out of 100 ingwestion
a. Injuries leading to lost time from work
b. Injuries requiring restricted duty or job transfer
c. Injuries requiring only first aid
d. Injuries causing a restriction of motor abilities
The statement "Injuries that cause a motor abilities restriction" should be exempted.
The following information should be considered:
Nancy does not need to involve the injuries that are related to the motor capabilities because Osha 300 log only involved the injuries or illnesses that are death-related.It also involved the injuries that are related to the day away from the work or restricted work or transform into other jobs. It also offers the medical treatment over and above first aid.Therefore we can conclude that the statement "Injuries that cause a motor abilities restriction" should be exempted.
Learn more about OSHA here: brainly.com/question/12744494
A firm in a purely competitive industry has a typical cost structure. The normal rate of profit in the economy is 5 percent. This firm is earning $15 on every $150 invested by its founders. Instructions: Enter your answers as a whole number. a. What is its percentage rate of return
Depreciation by Units-of-activity Method A diesel-powered tractor with a cost of $259,000 and an estimated residual value of $7,400 is expected to have a useful operating life of 85,000 hours. During April, the tractor was operated 200 hours. Determine the depreciation for the month. If required, carry out any division to two decimal places.
Answer:
the depreciation expense is $592
Explanation:
The computation of the depreciation expense is shown below:
= (cost - residual value) ÷ useful operating life × operated in april month
= ($259,000 - $7,400) ÷ 85,000 hours × 200 hours
= $592
Hence, the depreciation expense is $592
The same should be considered and relevant too
If fixed costs are $1,464,000, the unit selling price is $220, and the unit variable costs are $114, what are the break-even sales (units) if fixed costs are increased by $46,400? a.11,399 units b.21,374 units c.17,099 units d.14,249 units
Answer:
d.14,249 units
Explanation:
Break-even sales (units) = Fixed Costs ÷ Contribution per unit
Where,
Contribution per unit = Unit Selling Price - Unit Variable Cost
= $106
therefore,
Break-even sales (units) = ($1,464,000 + $46,400) ÷ $106
= 14,249
thus,
the break-even sales (units) if fixed costs are increased by $46,400 is 14,249 units.
Alpha Technology produces two products: a high-end laptop under the label Excellent Laptops and an inexpensive desktop under the label Outstanding Computers. The two products use two overhead activities, with the following costs:
Setting up equipment $3,000
Machining $15,000
The controller has collected the expected annual prime costs for each product, the machine hours, the setup hours, and the expected production. Excellent Laptops Outstanding Computers
Direct Labor $25,000 $10,000
Direct Materials $20,000 $5,000
Expected Production in Units 3,000 3,000
Machine Hours 850 2,000
Setup Hours 80 75
Calculate Outstanding Computer's consumption ratio for setup hours. (Note: Round your answer to two decimal places.)
a. 0.25
b. 0.48
c. 0.75
d. 0.45
e. 0.90
Answer:
Alpha Technology
Outstanding Computer's consumption ratio for setup hours is:
b. 0.48
Explanation:
a) Data and Calculations:
Overhead activities and costs:
Setting up equipment $3,000
Machining $15,000
Excellent Outstanding
Laptops Computers
Direct Labor $25,000 $10,000
Direct Materials $20,000 $5,000
Expected Production in Units 3,000 3,000
Machine Hours 850 2,000
Setup Hours 80 75
Total setup hours = 155 hours
Outstanding Computer's consumption ratio for setup hours = 75/155 * 100
= 48%
You purchase a digital camera for $495.00, a case for $38.50, a zoom lens for $216.45, and a
memory card for $74.95. The sales tax is 7.15 percent.
12. What is the total price of your purchase before sales tax?
A. S824.90
B. $749.95
C. $883.88
D. $801.25
You view tea and scones as perfect complements, and you prefer to consumer one cup of tea with one scone. Also, your indifference curves are plotted with tea on the vertical axis. If you presently have two cups of tea and one scone, what this the marginal rate of substitution (MRS) at this point
Answer:
Infinity
Explanation:
In the case when the tea and scones are considered to be the perfect complements also you give preference one cup of tea over the one scone
Plus the indifferent curve with tea should be plotted on the vertical axis
So in the case when there is 2 cups of tea with one scone so at this point, the MRS should be at infinity as the indifference curve should be in downward sloping because we presume that there is preferences done at monotonicity
Cioffi Manufacturing Company incorporates standards in its accounts and identifies variances at the time the manufacturing costs are incurred. Journalize the entries to record the following transactions:
a. Purchased 2,450 units of copper tubing on account at $52.00 per unit. The standard price is $48.50 per unit.
b. Used 1,900 units of copper tubing in the process of manufacturing 200 air conditioners.
Answer:
A. Dr Materials $18,825
Dr Direct Materials Price Variance $8,575
Cr Accounts Payable $127,400
B. Dr Work in Process $97,000
Cr Direct Materials Quantity Variance $4,850
Cr Material 92,150
Explanation:
Preparation of the journal entries
A. Dr Materials $18,825
(2,450*$48.50 per unit)
Dr Direct Materials Price Variance $8,575
[2,450*($52.00 per unit-$48.50 per unit)]
Cr Accounts Payable $127,400
(2,450*$52.00 per unit)
B. Dr Work in Process $97,000
(200*10 units *$48.50)
Cr Direct Materials Quantity Variance $4,850
(2,000 units – 1,900 units) × $48.50
Cr Material 92,150
(1,900 × $48.50 )
which of the following quotes is the best way to tell your boss that you can't accept a new assignment right now?
a. I would like to work on this. but if I take this on I won't be able to meet my current deadline.
b. you know I already have this other deadline
c. I just don't know if I can get this all done
d. I don't have time sorry
Answer:
a
Explanation:
it would be fine hopefully
The correct quotes are the best way to tell your boss that you can't accept a new assignment right now is "I would like to work on this. But if I take this on, I won't be able to meet my current deadline". Thus, option (a) is correct.
What is assignment?An assignment is a judicial word used in the context of contract and property law. Assignment is the process through which one person, the assignor, passes rights or advantages to another, the assignee.
Assignment is providing someone to a specific job or piece of labor, or assigning someone to a specific location to complete a job.
The simplest approach to inform your supervisor that you can't take on a new job right now is to say, "I'd want to work on this, but if I take it on, I won't be able to fulfill my present deadline." Therefore, it can be concluded that option (A) is correct.
Learn more about assignment here:
https://brainly.com/question/25875756
#SPJ2
Charlie's brother, Alexander, also consumes apples (A) and bananas (B). Alexander's utility function happens to be U(A, B) = 5A + 2B.
(a) Alexander has 40 apples and 5 bananas. The indifference curve through (40, 5) also include bundle ( _____ , 2).
(b) Alexander has 40 apples and 5 bananas. With this bundle, Alexander would like to give up _____ apple(s) for a banana.
Solution :
[tex]U(A, B) = 5A + 2B[/tex]
a). Bundles [tex](40, 5)[/tex] = U ( _____ , 2), lie on the same indifference curve. Suppose missing numbers is x.
So, [tex]U(40, 5) = U(x, 2)[/tex]
(40 x 5) + (2 x 5) = 50x + (2 x 2)
210 - 4 = 5x
[tex]x = 41.2[/tex]
So Alexander has [tex]40[/tex] apples and [tex]5[/tex] bananas. The indifference curve though [tex](40, 5)[/tex] also include bundle.
Therefore, (41.2, 2)
b). [tex]$MRS_{BA} = \frac{MU_B}{MU_A}$[/tex]
[tex]$=\frac{\delta U/\delta B}{\delta U/\delta A}$[/tex]
[tex]$=\frac{2}{5}$[/tex]
= 0.4
So Alexander has [tex]40[/tex] apples and [tex]5[/tex] bananas with this bundle. Alexander would like to give up [tex]0.4[/tex] unit apples for a banana.
Suppose that the U.S. government decides to charge cola consumers a tax. Before the tax, 45 million cases of cola were sold every month at a price of $6 per case. After the tax, 39 million cases of cola are sold every month; consumers pay $7 per case (including the tax), and producers receive $3 per case (after paying the tax).
The amount of the tax on a case of cola is___per case. Of this amount, the burden that falls on consumers is____per case, and the burden that falls on producers is____per case.
The effect of the tax on the quantity sold would have been larger if the tax had been levied on consumers.
A. True
B. False
Answer:
$4
$1
$3
b
Explanation:
Tax is a compulsory amount levied on goods and services. Taxes increase the price of a good
The type of tax stated here is a sales tax
A sales tax is an example of consumption tax. It is levied on the sales of goods and services
Tax on the case of cola = Amount paid by consumers after tax - amount received by producers
7 - 3 = 4
Tax paid by consumers = amount paid by consumers after tax - amount paid before tax
$7 - $6 = $1
Tax paid by suppliers = 4 - 1 = $3
Company X has 2 million shares of common stock outstanding with a book value of $2 per share. The stock trades for $3 per share. It also has $2 million in face value of debt that trades at 90% of face value. What is the debt ratio that should be used to calculate WACC
Answer:
23.08%
Explanation:
The computation of the debt ratio is shown below:
Debt amount
= 2 million × 0.90
= 1.80 million
And,
Equity amount
= 2 million × 3
= 6 million
Now
debt ratio = debt amount ÷ (amount of debt + amount of equity)
= 1.80 million ÷ ( 6 million + 1.80 million)
= 23.08%
Which of the following is true of good salespeople?
A. They know how to oversell their product so the customer can't say no.
B. They have tenacity but know when to walk away and move on to the next sales prospect.
C. They make promises they may not be able to keep in order to secure a sale.
D. They don't leave voice mail messages.
Answer:
Correct answer is A, They know how to oversell their product so the customer can't say no. Explanation: Good salespeople are those who sell more and more of their company's product.
Storrer Co. identifies the following activities that pertain to manufacturing overhead, for each activity, identify an appropriate cost driver.
Activity Cost Driver
Materials handling Storrer Co. identifies the following activities th Number of Purchase OrdersMachine Hours UsedNumber of SetupsSquare Footage OccupiedNumber of RequisitionsDirect Labor HoursNumber of InspectionsNumber of Parts or AssembliesNumber of Employees
Machine setups Storrer Co. identifies the following activities th Number of Purchase OrdersNumber of EmployeesNumber of SetupsNumber of InspectionsDirect Labor HoursNumber of Parts or AssembliesSquare Footage OccupiedNumber of RequisitionsMachine Hours Used
Factory machine maintenance Storrer Co. identifies the following activities th Direct Labor HoursNumber of InspectionsNumber of EmployeesNumber of RequisitionsNumber of SetupsNumber of Purchase OrdersNumber of Parts or AssembliesSquare Footage OccupiedMachine Hours Used
Factory supervision Storrer Co. identifies the following activities th Machine Hours UsedNumber of InspectionsNumber of EmployeesNumber of Parts or AssembliesNumber of Purchase OrdersNumber of RequisitionsSquare Footage OccupiedNumber of SetupsDirect Labor Hours
Quality control Storrer Co. identifies the following activities th Number of EmployeesDirect Labor HoursNumber of InspectionsSquare Footage OccupiedNumber of RequisitionsNumber of Purchase OrdersNumber of SetupsNumber of Parts or AssembliesMachine Hours Used
Answer:
Activity
1. Material Handling
2. Machine Setups
3. Factory Machine Maintenance
4. Factory Supervision
5. Quality Control
Cost Driver
1. Number of Requisitions
2. Number of Setups
3. Machine Hours Used
4. Number of Employees
5. Number of Inspections
Explanation:
The following are the activities with their cost drivers:
Activity
1. Material Handling
2. Machine Setups
3. Factory Machine Maintenance
4. Factory Supervision
5. Quality Control
Cost Driver
1. Number of Requisitions
2. Number of Setups
3. Machine Hours Used
4. Number of Employees
5. Number of Inspections
All of the following will improve a firm's liquidity position except: Answer A)increase long-term debt and invest the money in marketable securities B)increase accounts receivable turnover C)increase inventory turnover D)increase the average collection period
Answer:
i think answer B is right
but i am not sure
Explain the three degrees of inflation
Answer:
They are creeping, walking, galloping, and hyperinflation. There are specific types of asset inflation and also wage inflation. Some experts say demand-pull and cost-push inflation are two more types, but they are causes of inflation. So is the expansion of the money supply.
blank is a crucial factor to small business success A. Location B. Financing C. Advertising D. legal advice
Answer:
Advertisement
Explanation:
Advertising
The parts of the process cost summary include:______.
a. cost charged to each job.
b. costs charged to departments.
c. cost assignment and reconciliation.
d. equivalent units of production.
Answer:
b. costs charged to departments. c. cost assignment and reconciliation. d. equivalent units of productionExplanation:
In Process costing, the company involved is producing a large amount of goods and services that are exactly the same. In order to assign costs therefore, the company will assign costs to all the products instead of individually.
Costs would be charged to various departments because they produce the goods so the entire department cost has to be assigned and reconciled with with the department that produce the goods. When the company only managed to partially complete the production of a good, they will still have to assign costs and so use equivalent units of production to do so.
Tamarisk, Inc. issued 20800 shares of $1 par common stock for $40 per share during 2022. The company paid dividends of $50000 and issued long-term notes payable of $458000 during the year. What amount of cash flows from financing activities will be reported on the statement of cash flows
Answer:
$1,240,000
Explanation:
Calculation to determine the amount of cash flows from financing activities will be reported on the statement of cash flows
Cash flow from Financing activities
Issue of common stock $832,000
(20800 shares × $40)
Add Issued of long term notes payable $458,000
Less: Dividend paid -$50,000
Net Cash flow from Financing activities $1,240,000
Therefore the amount of cash flows from financing activities will be reported on the statement of cash flows is $1,240,000
Motors are assembled in a process with two resources. The first resource has a capacity of 2 motors per hour. The capacity of the second resource is 4.5 motors per hour. Demand for this process is 2.3 motors per hour.
Instruction: Round your answer to three decimal places.
What is the cycle time of this process (in minutes)? _______minutes
Answer: 26.1 minutes
Explanation:
The cycle time is calculated by the formula:
= Production time available / Desired output
Production time available = 1 hour as production is per hour.
1 hour = 60 minutes
Desired output is the demand per hour from the process
Cycle time = 60 / 2.3
= 26.1 minutes
How have engineer contributed to the society?Explain
Explanation:
Engineers contributed very significantly to a country's development from an agricultural economy to the one that includes manufacturing communication services and exploration to the country's natural resources like 10 hydro power oil and gas
Mary is currently buying apples and oranges such that the last unit of apples has 30 units of utility and the last unit of oranges has 40 units of utility. She has allocated her entire budget. If the price of an apple is 10 cents and the price of an orange is 20 cents, to maximize her utility, what should Mary do
Answer:
Buy more apples and fewer oranges
Explanation:
Utility is defined as the level of enjoyment or satisfaction that a person gets from consumption of a good or service.
Consumers logically try to maximise utility.
In the given instance we need to get the level of utility for apples and oranges to see which has more utility per unit cash spent.
For apples utility per cash spent = 30 units of utility ÷ 10 cents= 3 utility per cent
For oranges utility per cash spent = 40 units of utility ÷ 20 cents = 2 utility per cent
As apples have a higher utility per cent spent, it will be best Mary buys more apples and fewer oranges
In factorial designs, the response produced when the treatments of one factor interact with the treatments of another in influencing the response variable is known as _____.
a. replication
b. interaction
c. the main effect
d. a factor
Answer: B. Interaction
Explanation:
A factorial design enables the effect of several factors and the interactions that exist between them to be determined.
In factorial designs, the response produced when the treatments of one factor interact with the treatments of another in influencing the response variable is referred to as interaction.
Therefore, the correct option is B.
Ratchet Manufacturing anticipates total sales for August, September, and October of $200,000, $210,000, and $220,500 respectively. Cash sales are normally 25% of total sales and the remaining sales are on credit. All credit sales are collected in the first month after the sale. Compute the amount of accounts receivable to be reported on the company's budgeted balance sheet for August. Multiple Choice $50,000. $157,500. $150,000. $52,500. $200,000.
Answer:
$150,000
Explanation:
Computation for the amount of accounts receivable to be reported on the company's budgeted balance sheet for August.
First step
Total sales of August = 0.25 × $200,000
Total cash sales = $50,000
Last step
Total credit sales for the month of August = Total sales in August - Total cash sales in August
Total credit sales for the month of August= $200,000 - $50,000
Total credit sales for the month of August= $150,000
Therefore the amount of accounts receivable to be reported on the company's budgeted balance sheet for August is $150,000
Conducting a search of the story is part of store closing duties why
Searching for the store is part of store closing duties. Why?
A. To look for empty boxes
B. To ensure that all trash has been removed
C. To make sure someone is not hiding
D. To make sure all merchandise is on the sales floor
Answer:
B. To ensure that all trash has been removed
Explanation:
The purpose of conducting a search of the store which is part of store closing duties is to ensure no detail is overlooked such as removing all the trashes available and eventually avoiding more work for the next morning.
In some other cases, it is also an opportunity to clear the corridors or spaces of any merchandise, carts, or litter around the floors.
Suppose that an additional 350 hours per week can be obtained from the milling machines by working overtime. The incremental cost would be $2.00 per hour. What would be the allowable increase(from the excel sensitivity report) in overtime when compared to additional hours that can be obtained
Solution :
It is given that :
Additional time obtained per week from milling machines = 350
The incremental cost = $ 2 per hour
Therefore, the allowable increase for milling operation is 400.
This indicates that we can accommodate additional constraint RHS of [tex]200[/tex] hours.
Also we have to consider the impact on the profit of 2.25 which is an incremental cost of [tex]1.5[/tex] is well affordable.
When customers have questions about a product they've purchased, or problems using it, they can go online to the company's website to search for answers or interact with others with a similar problem. This is an example of:
Answer:
a community support forum
Explanation:
A community support forum is defined as a meeting place for members of a community to discus their concerns, opinions, and ideas on a shared topic of interest.
In the given scenario customer with various challenges go online to the company's website to search for answers or interact with others with a similar problem.
They are using a community support forum to discuss problems they are facing in using a product
1. Why do the bank regulators set capital standards for commercial banks, and illustrate with the capital requirements in Vietnam’s banking system?
Answer:
Because banking is such an important part of the economy, regulators have established minimum required levels of bank capital, generally requiring more capital if the bank is larger or is riskier, though exactly what counts as capital these days, and how size and risk are measured, becomes quite complex.
