Answer:
atomic mass of sulfur is 32.06 g/mol
Explanation:
A new stable element with an atomic number of 120 and an atomic mass of 246 is created in a particle accelerator. Enough of this element is created to determine that it combines with chlorine in a 1:2 ratio. Element 120 should be placed in the same group as _____ on the periodic table.
Answer:
Be,Mg,Ra etc
Explanation:
It should be palced in group 2A because as it reacts with chlorine in ratio of 1:2 . It's valancy is 2 and is metal as it react with non metal donating two electrons .
one more thing it fits there orderly
relate the pH of a solution to its hydronium and hydroxyl ion concentration and its acidity or basicity
brain list if your answer is good
when ph decrease that means acidity increase
when ph increase that means basicity increase
hii pls help me to balance the equation thanksss
Explanation:
2KCLO3 (s) = 2KCl (s) + 3O2 (g)
Balance the following equations
ANSWER
2Ba + 2HBr → 2BaBr + H2
2BiCl3 + 3H2S → Bi2S3 + 6HCl
Br2 + 2KI → I2 + 2KBr
4Fe + 3O2 → 2Fe2O3
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY HAVE A GREAT DAY:)Answer:
[tex]3Mg _{(s)} + N _{2(g)} → Mg_{3} N _{2(s)}[/tex]
[tex]Ba _{(s)} + 2HBr_{(g)} → BaBr _{2(s)} + H _{2(g)}[/tex]
[tex]2BiCl_{3(s)} + 3H_{2} S _{(g)} → Bi _{2} S _{ 3(g)} + 6HCl _{(g)} \\ [/tex]
[tex]Br_{2(g)} + 2KI _{(g)} → I _{2(g)} +2 KBr _{(g)}[/tex]
[tex]4Fe_{(s)}+ 3O_{2(g)} → 2Fe_{2} O _{3(s)} [/tex]
A scientist claims that the water molecules that you drink today could be millions of years old. Use evidence from the water cycle to support the scientist’s claim.
Answer:
As water on the surface of lakes, oceans, and rivers warms up, it travels into the sky as very tiny droplets, or vapor. When the water vapor gets colder, it turns back to liquid to help form clouds.
When the liquid gets so heavy it can’t stay in the atmosphere anymore, it falls, or “precipitates,” as rain, snow, sleet, hail, or, my favorite, graupel. Once the precipitation reaches the ground or lands in lakes, oceans, and rivers, the cycle continues.
Explanation:
A scientist claims that the water molecules that you drink today could be millions of years old in the water cycle the new clouds athat re made cannot rain but the clouds which are old do rain.
What is the water cycle?The water cycle or cycle of water is the journey of each and every water molecule by which it is made up of as the clouds in the environment are made up of the evaporation process in the environment.
The vapors of evaporation condense in the environment to form the clouds and these clouds are only responsible for the rain but the old and heavy clouds can only do it.
Therefore, in the water cycle, the new clouds are made cannot rain but the clouds which are old do rain scientist claim that the water molecules that you drink today could be millions of years old.
Learn more about the water cycle, here;
https://brainly.com/question/1151425
#SPJ2
what is cytoplasm ? what does it contain?
Answer:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm.
Answer:
Explanation:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm. ...
Suppose you had a valuable collection of small diamonds, which you kept safe from the thieves by mixing them with white sugar crystals. You store the mixture in a jar labeled 'sugar'. Now you want to sell the diamonds. Describe how you would separate all the diamonds from the sugar.
Answer:
Pour the sugar/diamond mixture into a container of water and stir until the sugar is dissolved completely. Then strain the mixture and wash the diamonds with water.
Answer:
Stir with a large enough volume of cold water to dissolve all the sugar. Filter to leave the diamonds on the filter paper. Wash on the filter paper with more water to remove any last traces of sugar solution. Allow to dry.
PLZ HELP ME WITH MY WORK
What is a compound?
A substance that is made from two different metals
B. A substance that cannot be broken into simpler substances
C. A substance that is made using a chemical reaction
D. A substance that can be separated by physical means
Answer:
C.
Explanation:
Answer A is incorrect because a compound doesn't have to be made with only metals.
Answer B is incorrect because that is actually the definition of a pure element.
Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.
Answer D is incorrect because compounds cannot be separated by physical means.
Hope this helps :D
What is the name for the compound li2so4
Answer:
Explanation:
Lithium Sulphate
Answer:
Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.
Chemistry!! Help me! And explain step by step!
1st part is ure answer --> 2M
Given mass -> 58 grams
mass of NaCl -> 58.44 approx -> 58 any
moles given-> 1 moles
[tex]Molarity = \frac{moles}{vol \: in \: lts} [/tex]
[tex]Molarity = \frac{1}{0.5} = \frac{10}{5} \\Molarity = 2M[/tex]
A sample of gas occupies 1.2 L at 12.0oC. Assuming pressure remains the same, what would be the volume (in L) of this gas at 67oC?
A.
1.4
B.
1.0
C.
0.2
D.
5.0
E.
6.7
Answer:
e.
6.7
hope it help
.
.
.
.
.
.
Some species form social groups only with members of the same gender. For example, elephants form groups with
only females and their offspring. Once the male offspring reach a certain age, they leave the group and become
solitary.
Which is a benefit of this type of social group structure?
Explanation:
For example, elephants form groups with only females and their offspring. Once the male offspring reach a certain age, they leave the group and become solitary. Which is a benefit of this type of social group structure? A:Females do not have to compete for a mate.
can you solve this science question ⁉️
Answer:
chemical reaction between those a b c it's a reaction which occurs when heating
Which atom's ionization energy is greater than that of phosphorus (P)?
A. Ba
B. K
C. As
D. CI
Answer:
Chlorine
Explanation:
the ionization increases as you get closer to the top right. since chlorine (Cl) is the only one of the answer choices that is closer to the top right corner compared to phosphorous (P), that is the answer.
Answer:
cl
Explanation:
because ionization energy decrease from left to right
what does porous mean
Answer:
porous = allowing liquid or air to pass through slowly
I hope it's helpful
Answer:
It is a rock or or other materials, having minutes interstices through which liquid or air may pass.
Uranium-235 and uranium-238 are different ________ of uranium
(Apx answers please)
Answer:
Isotopes
Explanation:
An isotope are the atoms of an element with similar chemical identity and number of protons but different atomic masses. This means that isotopes of an element differ from one another by their number of NEUTRONS.
For example, the uranium element possesses isotopes as follows: Uranium-235 and uranium-238. This two isotopes have the same chemical identity and number of protons/atomic no., which is 92. However, the atomic masses (235 and 238) are different.
Answer:
Isotopes
Explanation:
what is the product of SO2+H2O.
Answer:
H2O + SO2 → H2SO3
Explanation:
H2O + SO2 → H2SO3
Answer:
l think this is the answer .
22.5 ml of a 0.200 m HBr solution was added to a 50.00 ml sample of 0.250 m sodium benzoate (NaC7H5O2). Calculate the pH. Benzoic acid has a Ka 6.30 x 10-5.
In this problem, we need to find the pH of a buffer (pH = 4.45) that is produced by the reaction of strong acids as HBr that reacts with weak bases as NaC₇H₅O₂ producing its weak acid and a salt, as follows:
HBr + NaC₇H₅O₂ → HC₇H₅O₂ + NaBr
If in the reaction, the limiting reactant is the strong acid, we will produce a buffer (The aqueous mixture of a weak acid and its strong base).
Using Henderson-Hasselbalch equation, we can find the pH of this buffer:
[tex]pH = pKa + log \frac{[NaC_7H_5O_2]}{[HC_7H_5O_2]}[/tex]
Where:
pKa is -log Ka = 4.20
[] could be taken as the moles of each species
After the reaction, the moles of HBr = Moles of HC₇H₅O₂ and the remaining moles of NaC₇H₅O₂ = Initial moles of NaC₇H₅O₂ - Moles of HBr.
Moles HBr:
22.5mL = 0.0225L * (0.200mol/L) = 4.5x10⁻³ moles HBr
Moles NaC₇H₅O₂:
50.0mL = 0.0500L * (0.250mol/L) = 0.0125 moles NaC₇H₅O₂
That means the moles after the reaction of the species of the buffer are:
Moles HC₇H₅O₂ = Moles HBr = 4.5x10⁻³ moles
Moles NaC₇H₅O₂ = 0.0125 moles - 4.5x10⁻³ moles = 8.0x10⁻³ moles
Replacing in H-H equation:
[tex]pH = 4.20+ log \frac{[8.0x10^{-3}]}{[4.5x10^{-3}]}[/tex]
pH = 4.45
Learn more about Henderson-Hasselbalch equation in:
https://brainly.com/question/13423434
Convert the following moles to grams :)
1. 2.4 moles sulfur
2. 1.5 moles BeI2
3. 7.5 moles C6H12O6
Answer:
3
Explanation:
sky is high and I am good.
Câu 9: 100 g dung dịch MgCl2 9.5 % tác dụng đủ với dung dịch KOH 5,6 % .được dung dịch A và chất rắn B. Lọc rắn B và nung đến khối lượng không đổi được chất C.
a) Viết pt .Tính khối lượng răn C
b) Tính nồng độ phân trăm của dung dịch A.
hiiiiiiiii
hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
3. An atom
OF
elemente A has mass number 39 and 19 protons
Write the electron arrangement of the atom
Answer:
Explanation:
Potassium (K) atom has 19 electrons. The full electron configuration of Potassium (K) is 1s22s22p63s23p64s1
Principal energy level
Quantum number: n
1
2
3
4
5
6
Sublevels
availableQuantum number: l
1s
2s 2p
3s 3p 3d
4s 4p 4d 4f
5s 5p 5d 5f 5g
6s 6p 6d 6f 6g 6h
Which of the following is an example of combustion?
O A. potassium chlorate -> potassium chloride + oxygen
B. aluminum + cobalt chloride -> aluminum chloride + cobalt
O c. hexane + oxygen carbon dioxide + water
OD. sodium cyanide + hydrochloric acid -> sodium sulfate + hydrogen cyanide
3. What would be the freezing point for a 5.7 molal aqueous sucrose (C12H22O) solution? The freezing
point depression constant for water = 1.86°C/m. Show your work.
Answer:
- 10.6° C
Explanation:
Given that,
In the aqueous sucrose solution,
Molality of the solution (m) = 5.7
Freezing point constant (K) = 1.86
To find,
The freezing point of the solution = ?
Method:
To find its freezing point, we will first find out if the solute demonstrates an electrolyte or not.
In case it is not, the van't Hoff factor i.e. ration of particles' concentration denoted by (i) would be taken as 1. So,
ΔT(change in temperature) = i * m * K (putting the given values)
= 1 * 5.7 * 1.86
= 10.6° C
Thus, the freezing point equals to 0 - 10.6° C = -10.6° C.
please answer this questions soon
i will mark him or her brillient
Answer:
1)Or
d.Sublimation
2)
b.iodine is the solute and alcohol is solvent
3)
a.compostion of solute
Answer:
1) a) centrifugation
OR
b) sublimation
2) a) iodine is the solute and alcohol is solvent
3) a) concentration of soLute
What is the solubility of salt at 60°C if 2 gm of the salt is left behind when 7 gm of its saturated solution at that temperature dried?
a) 20
b) 40
c) 60
d) 80
40
Explanation:
because its Saturated
Potassium impart purple colour but beryllium do not impart any colour to the flame.Why?
Answer:
The electrons in beryllium and magnesium are too strongly bound to get excited by flame. Hence, these elements do not impart any color.
Which of these solutions is acidic?
Answer:
Option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
Explanation:
To know if a solution is acidic we need to calculate the pH and it must be lower than 7. A value of pH equal to 7 is a neutral solution and a solution with a pH value higher than 7 is a basic solution.
a. For the [OH⁻] = 7.0x10⁻⁹ M we have:
[tex] pOH = -log[OH^{-}] = -log(7.0 \cdot 10^{-9}) = 8.15 [/tex]
Now, the pH is:
[tex] pH + pOH = 14 [/tex]
[tex] pH = 14 - pOH = 14 - 8.15 = 5.85 [/tex]
This solution is acidic (pH < 7)
b. [H₃O⁺] = 8.5x10⁻⁸ M
[tex] pH = -log(8.5 \cdot 10^{-8}) = 7.07 [/tex]
This is not an acidic solution. Is a neutral one (pH around to 7).
c. [OH⁻] = 2.5x10⁻⁶ M
[tex] pOH = -log[OH^{-}] = -log(2.5 \cdot 10^{-6}) = 5.60 [/tex]
Then, the pH is:
[tex]pH = 14 - pOH = 14 - 5.60 = 8.40[/tex]
Hence, this is not an acidic solution. It is basic (pH > 7).
Therefore, option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
I hope it helps you!
please answer fast............
It's O2 which is oxygen....
Answer:
c. CO2 is the answer.Explanation:
Hope this helps you. Please mark as brainliest. Good Luck^_^
what is precipitating ???
anyone please tell me how to delete an I'd
Explanation:
Desposition of solid matter in a solution
6c.Calculate the maximum volume, in dm3, of chlorine gas at Stp that can be obtained from 23.4 tonnes of molten sodium chloride. 1 tonne= 10^6 Mr of NaCl=58.5 molar volume of chlorine at stp= 24dm3 Give your answer in standard format.
Answer:
4.48×10⁶ dm³
Explanation:
We'll begin by converting 23.4 tonnes to grams (g). This can be obtained as follow:
1 tonne = 10⁶ g
Therefore,
23.4 tonnes = 23.4 × 10⁶
23.4 tonnes = 2.34×10⁷ g
Thus, 23.4 tonnes is equivalent to 2.34×10⁷ g
Next, we shall determine the number of mole in 2.34×10⁷ g of NaCl. This can be obtained as follow:
Mass NaCl = 2.34×10⁷ g
Molar mass of NaCl = 58.5 g/mol
Mole of NaCl =?
Mole = mass / molar mass
Mole of NaCl = 2.34×10⁷ / 58.5
Mole of NaCl = 4×10⁵ moles
Next, we shall determine the number of mole of chlorine, Cl₂ produced from the reaction. This can be obtained as follow:
2NaCl —> 2Na + Cl₂
From the balanced equation above,
2 moles of NaCl reacted to produce 1 mole of Cl₂.
Therefore, 4×10⁵ moles of NaCl will react to produce = (4×10⁵ × 1)/2 = 2×10⁵ moles of Cl₂.
Thus, 2×10⁵ moles of Cl₂ were obtained from the reaction.
Finally, we shall determine the volume of Cl₂ produced. This can be obtained as follow:
1 mole of Cl₂ at stp = 22.4 dm³
Therefore,
2×10⁵ moles of Cl₂ at stp = 2×10⁵ 22.4
2×10⁵ moles of Cl₂ at stp = 4.48×10⁶ dm³
Thus, the volume of chlorine obtained from the reaction is 4.48×10⁶ dm³
