Thermometers are used to measure temperatures. The temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Given that:
[tex]EMF = 15mv[/tex]
[tex]T_1 =20^oC[/tex] --- Temperature at cold junction
[tex]s = 0.03mv/^oC[/tex] ---- Sensitivity
The temperature [tex]T_2[/tex] at the hot junction is calculated as follows:
[tex]T_2 = \frac{EMF}{s} + T_1[/tex]
So, we have:
[tex]T_2 = \frac{15mv}{0.03mv/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03}^oC + 20^oC[/tex]
[tex]T_2 = 500^oC + 20^oC[/tex]
[tex]T_2 = 520^oC[/tex]
Hence, the temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Read more about thermometers at:
https://brainly.com/question/13271366
Where does water pollution come from
Answer:Water pollution can come from a variety of sources. Pollution can enter water directly, through both legal and illegal discharges from factories, for example, or imperfect water treatment plants. Spills and leaks from oil pipelines or hydraulic fracturing (fracking) operations can degrade water supplies.
Explanation:
The Scanning Electron Microscope, or SEM, uses beams of_______
residue from bullets or ink from a ransom note.
Electricity
Protons
Neutrons
Electrons
Answer:
Electrons.
Hope it helps.
Explain why there was a reaction between zinc metal and a salt solution of copper sulphate please help me
Answer:
When zinc is added to copper sulphate (CUSO4) solution due to more reactivity of zinc, cooper is replaced by the zinc and forms zinc sulphate. During the process, the colour of the solution changes from blue to colourless.
Salt water has a density of 1.183g/mL. A ball has a density of 0.0134 g/mL. Will the ball float or sink?
Is it me or is this year moving very fast?
Does anyone even remember Easter?
Answer:
I think you are moving fast my friend,but i don't remember Easter.
Answer:
yo fr i dont even remember last year christmas
Explanation:
what is chemical change ?
[tex]\huge{ \color{violet}{ \boxed{ \color{hotpink}{Answer}}}}[/tex]
➣ Chemical ChangeIt occurs when new materials are formed by a change in the way the atoms are bonded together.Heat, light or electrical energy is often emmitted or absorbed.[tex] \: [/tex]
[tex]\large\tt\:⚘ \: MishiChaeYoon \: ⚘[/tex]
What is the systematic name of the following compound?
Li2S
Choose 1 answer:
А
Lithium sulfate
B В
Lithium sulfide
Dilithium sulfate
Dilithium sulfide
Explanation:
Lithium sulfide
if my answer helps you than mark me as brainliest.
6.3 gram of HNO3 as mass of nitrate
Moles of HNO 3
= 6.3/63 = 0.1 moles
HNO3 has 1 atom of H , 1 atom of N , 3 atoms of O
No of atoms = moles of molecule × atomicity of atom × avogadro number
No of atoms of H =0.1×1×6.023×10^23
= 6.023×10^22
No of atoms of N =0.1×1×6.023×10^23
= 6.023×10 ^22
No of atoms of O =0.1×3×6.023×10 ^23
= 18.069×10 ^22
Subject:.
Date:
8 a) vinyl
chloride C₂H₂ is prepared by the reaction of ethyne gas C₂H₂ with hydrochloric
acid, HCl.
Answer:
Yes it is true
Explanation:
vinyl chloride is prepared by c2h2+hcl. Since vinyl chloride is formed after ETHYNE IS MIXED WITH CHLORIDE.
The lines of latitude are measured
from a line at the center of the Earth
called the
Answer:
parallels
Explanation:
hope it may help you
What is sulfuric acid? Briefly
Answer:
Sulfuric acid or sulphuric acid, also known as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H₂SO₄. It is a colorless, odorless and viscous liquid that is miscible with water.
Explanation:
Explanation:
Sulfuric acid is a colourless oily liquid. It is soluble in water with release of heat. It is corrosive to metals and tissue. The major use of sulfuric acid is in the production of fertilizers . Sulfuric acid, sulfuric also spelled sulfuric (H2so4) , also called oil of vitrod. Sulfuric acid is a very important commodity chemical , and a nation's sulfuric acid production is a good indicator of it's industrial strength.
Is this right:) please tell me
Answer:
I think that:
The tendency of an object to resist changes in motion: inertia
Attractive force:gravity
And everything else is right
Explanation:
I am not a physicist
But I passed physics with an A
You go to a convenience store to buy candy and find the owner to be rather odd. He allows you to buy pieces in multiples of four, and to buy four, you need $0.23. He only allows you to do this by using 3 pennies and 2 dimes. You have a bunch of pennies and dimes, and instead of counting them, you decide to weigh them. You have 636.3 g of pennies, and each penny weighs 3.03 g. Each dime weighs 2.29 g. Each piece of candy weighs 10.23 g.
Required:
a. How many pennies do you have?
b. How many dimes do you need to buy as much candy as possible?
c. How much should all these dimes weigh?
d. How many pieces of candy could you buy? (number of dimes from part b)
e. How much would this candy weigh?
f. How many pieces of candy could you buy with twice as many dimes?
a. We have 210 pennies
b. We need 140 dimes to buy as much candy as possible.
c. All these dimes should weigh 320.6 g.
d. We can buy 70 pieces of candy.
e. The total weight of the candies will be 2864.4 g
f. Using 3 pennies and 2 dimes as a pack to buy candies we can not buy more pieces of candy because we would need more pennies.
a. To find the number of pennies we need to divide the total mass of pennies ([tex]m_{t_{p}}[/tex]) by the mass of each one of them ([tex]m_{p}[/tex]):
[tex] N = \frac{m_{t_{p}}}{m_{p}} = \frac{636.3 g}{3.03 g} = 210 [/tex]
Hence, we have 210 pennies.
b. We can find the total number of pieces in multiples of four that we can buy with 210 pennies. To buy one piece we need to use 3 pennies and 2 dimes, so the number of total pieces is:
[tex] 3P = 210 [/tex]
Where P is for pennies
[tex] P = \frac{210}{3} = 70 [/tex]
Hence, we can buy a total of 70 pieces in multiples of four candies.
Now, from this total of 70 pieces, we can use the following number of dimes:
[tex] 2D = 70 [/tex]
Where D is for dimes
[tex] D = \frac{70}{2} = 140 [/tex]
Therefore, we need 140 dimes to buy as much candy as possible.
c. The mass of the total amount of dimes ([tex] m_{t_{d}}[/tex]) is:
[tex] m_{t_{d}} = 140*2.29 g = 320.6 g [/tex]
Hence, all these dimes should weigh 320.6 g.
d. We know that we can buy a total of 70 pieces in multiples of four candies (calculated above).
Then, we can buy 70 pieces of candy.
e. Knowing that each piece is a multiple of 4 candies, the weight of the 70 pieces of candy ([tex]m_{c}[/tex]) is:
[tex] m_{c} = 70*4*10.23 g = 2864.4 g [/tex]
f. Since we can buy pieces in multiple of four candies using 3 pennies and 2 dimes if we have now twice as many dimes, we can not buy more pieces of candy because we would need more pennies.
To see another example go here:
https://brainly.com/question/12526075https://brainly.com/question/17173050I hope it helps you!
A beggar wrapped himself with a few layers of newspaper on a cold winter night. This helped him to keep himself warm because:
(a) friction between the layers of newspaper produces heat.
(b) air trapped between the layers of newspaper is a bad conductor of heat.
(c) newspaper is a conductor of heat.
(d) newspaper is at a higher temperature than the temperature of the surrounding.
the one who gets its correct will be marked as the brainliest and also be followed by me!!
P.S. have a great Sunday :)
Answer:
(b)The air trapped between the layers of newspaper is a bad conductor of heat.Thus the layers of newspaper helped the beggar to keep himself warm
Hey there!
I believe your answer would be "Air trapped between the layers of newspaper is a bad conductor of heat."
Hope this helps!
Have a great day!
Which of the following compounds has the lowest percent gold content by mass which one has the highest percent gold content by weight?
a. AuOH
b. Au(OH)3
c. AuCI3
d. AuI3
Answer:D. AuI3
Explanation:
What is the identity of the element? Help please
Answer:
10
Explanation:
The identity of an element refers to the specific element that is being referred to. The identity of the element is phosphorus (P).
To determine the identity of the element based on the given idealized PES (Photoelectron Spectroscopy) spectrum, we need to examine the pattern of relative number of electrons vs. energy levels.
The PES spectrum shows the relative number of electrons at different energy levels, and it is usually plotted with the relative number of electrons on the y-axis and the energy levels on the x-axis.
From the given data, we can see that there are three peaks with the following approximate values:
Energy (MJ/mol): ~1000, Relative number of electrons: ~1000
Energy (MJ/mol): ~100, Relative number of electrons: ~100
Energy (MJ/mol): ~10, Relative number of electrons: ~10
Based on this information, we can infer that the element has three distinct electron energy levels or subshells with approximately 1000, 100, and 10 electrons each.
To identify the element, we need to consider the electron configuration of elements in the periodic table and find an element that has three energy levels or subshells with roughly the same number of electrons.
The element that matches this pattern is phosphorus (P), which has the electron configuration: 1s² 2s² 2p⁶ 3s² 3p³. This configuration has 2 electrons in the 1st energy level (1s²), 8 electrons in the 2nd energy level (2s² 2p⁶), and 5 electrons in the 3rd energy level (3s² 3p³). The numbers are not exact matches, but they are relatively close to the given values in the PES spectrum.
To know more about element here
https://brainly.com/question/20096027
#SPJ2
Rain soaks into the soil or runs off into oceans, rivers, and lakes. ___________ which process is this
Answer:
The water falls to the earth as precipitation, such as rain, hail, sleet, and snow. When precipitation reaches the earth's surface, some of it will flow along the surface of the land and enter surface water like lakes, streams, and rivers, as runoff. The rest of it soaks or percolates into the soil, called
Please help thank you (15 points)
Answer:
D. The sun has less gravitational pull on Pluto because it is farther away.
Equal masses of five unknown non-electrolytes are dissolved in water and the boiling point elevations are measured. Rank the following non-electrolytes from highest to lowest molar mass.
A. Boiling point of D (aq) = 103.2 degree C
B. Boiling point of A (aq) = 102.4 degree C
C. Boiling point of E (aq) = 101.3 degree C
D. Boiling point of B (aq) = 101.9 degree C
E. Boiling point of C (aq) = 100.5 degree C
What is the main difference between dew and clouds?
Answer:
dew is wet and clouds are not
Explanation:
30 POINTS!
Which parts are only found in plant cells?
Answer:
A B and F
Explanation:
.................
1.List three (3) importance of photosynthesis to our ecosystem. a) b) c)
Answer:
It is the number one source of oxygen in the atmosphere. It contributes to the carbon cycle between the earth, the oceans, plants and animals. It contributes to the symbiotic relationship between plants, humans and animals. It directly or indirectly affects most life on Earth
Answer:
three importance are
it helps in fixing and balancing the amount of carbon dioxide and oxygen in the atmosphere
it provides the nutrition to the plant
it helps the. plant in its growth
Write electronic configuration of Na and Ca on the basis of subshell.
Na:-
Sodium has 11 electrons so the EC followed by
[tex]\\ \sf\Rrightarrow 1s^22s^22p^63s^1[/tex]
Ca:-
Calcium has 20electrons so the EC followed by
[tex]\\ \sf\Rrightarrow 1s^22s^22p^63s^23p^63d^2[/tex]
7. Which of the following is not part of the proper protocol for using acids and bases?
A. Wearing protective clothing while handling
B. Storing acids and bases below 10°C
O C. Storing acids and bases in separate areas
D. Add acid to water, not water to acid
Answer:
D. Add acid to water, not water to acid
An atom has 30 protons and 30 neutrons. What is its mass number?
Mass number=No of protons+No of neutrons
[tex]\\ \sf\longmapsto Mass\:No=30+30[/tex]
[tex]\\ \sf\longmapsto Mass\:No=60[/tex]
Explanation:
Here,
Protons(p+)=30
Neutrons(N⁰)=30
We know,
Atomic mass(z)=(P+)+(N⁰)
=30+30
=60
The temperature of 150 mL of water is 25°C. What must happen for the temperature of the
water to increase to 35°C?
A. Thermal energy must be transferred to the water to increase the average kinetic
energy of the water molecules.
B. Thermal energy must be transferred from the water to decrease the average
kinetic energy of the water molecules.
C. Water must be removed to decrease the thermal energy.
D. More water must be added to increase the thermal energy.
Answer:D
Explanation:
How can the Swartz process be modified to work for bacteria?
Answer:
https://swartzbiotechnologylab.sites.stanford.edu/research
Explanation:
why does beryllium not liberate hydrogen from acid readily
How does the state of matter affect the behavior of molecules?
Answer:
The behavior of molecules in different phases of matter represents a balance between the kinetic energies of the molecules and the attractive forces between them. All molecules are attracted to each other. The molecules are in the solid-state. At higher temperatures, the kinetic energy of the molecules is higher.
Molecules are the various elements linked together and are present in the matter. The molecules in different phases of matter are represented by kinetic energies and attractive forces.
What is the kinetic molecular theory of matter?The kinetic molecular theory of matter elucidates the composition of the matter of particles of tiny size. The theory explains matter like gas, liquids, and solids.
The different states of matter explain the constant movement and negligible intermolecular force and volume of the particles. The particle matter is said to undergo elastic collision.
The molecules of solids have low kinetic energy whereas the molecules of liquids and gases show high kinetic energy as the particles are placed at larger distances.
Therefore, the state of matter affects the behavior of molecules.
Learn more about kinetic molecular theory here:
https://brainly.com/question/15013597
#SPJ6
What is the name of this molecule?
A. Hexane
B. Hexyne
C. 2-pentane
D. Pentane
