Answer:
That means Cu2O is limiting reagent and C is excess reagent
Explanation:
Based on the reaction, 1 mole of Cu2O reacts per mole of C. The ratio of reaction is 1:1.
To solve this question we need to convert the mass of each reactant to moles. The reactant with the lower amount of moles is limiting reactant and the excess reactant is the reactant with the higher number of moles.
Moles Cu2O -Molar mass: 143.09 g/mol-
114.2g Cu2O * (1mol / 143.09g) = 0.798 moles Cu2O
Moles C -Molar mass: 12.01g/mol-
11.1g C * (1mol / 12.01g) = 0.924 moles C
That means Cu2O is limiting reagent and C is excess reagent
Unknown A melts at 113- 114oC. Known compounds 3-Nitroaniline and 4-Nitrophenol both melt at 112-114 oC. If A is mixed with 3-Nitroaniline and the melting point becomes broad and depressed, what must A be __________A) 3-Nitroaniline B) 4-Nitrophenol C) Both
Answer:
C) Both
Explanation:
Whenever we mix any pure form of a compound with some other form of a compound which is not in the other standard pure state, this results in the melting point of mixture to get dispersed and it becomes broad form.
Thus, when a known compound of 3-Nitroaniline mixes with both 3-Nitroaniline and 4-Nitrophenol, the melting point of the compound becomes depressed and board.
Thus the correct option is (C).
Water is considered to be a diatomic molecule because it composed of two different atoms. True or false?
Answer:
false
Explanation:
False, water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Explanation:
The monoatomic molecule is composed of a single atom of an element.For example: Helium(He) , argon(Ar) etc.The diatomic molecule is composed of two atoms of the same or different elements.For example: hydrochloric acid (HCl), sodium chloride (NaCl) etc.The polyatomic molecule is composed of three or more than three atoms of the same or different elements.For example: water ([tex]H_2O[/tex]), sodium hydroxide(NaOH) etc.So, from this, we can conclude that water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Learn more about types of molecules here:
brainly.com/question/3213630?referrer=searchResults
brainly.com/question/4979095?referrer=searchResults
What would you use to measure
to measure an amount of solid sodium chloride(NaCI)
crystals to add to a 30 mL solution?
A. Triple Beam Balance that measures to the nearest 0.1 grams.
) B. 10 ml graduated cylinder.
Scale that can weigh up to 250 lbs.
D. Spectrophotometer that measures between 100 and 900 nanometers.
A barium hydroxide solution is prepared by dissolving 2.29 g of Ba(OH)2 in water to make 46.6 mL of solution. What is the concentration of the solution in units of molarity?
Concentration: 0.287 M
The barium hydroxide solution is used to titrate a perchloric acid solution of unknown concentration. Write a balanced chemical equation to represent the reaction between barium hydroxide and perchloric acid.
Chemical Equation:
If 25.5 mL of the barium hydroxide solution was needed to neutralize a 8.99 mL aliquot of the perchloric acid solution, what is the concentration of the acid?
Concentration:
Answer:
0.287 M
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
1.62 M
Explanation:
Step 1: Calculate the concentration of Ba(OH)₂
We will use the following expression.
[Ba(OH)₂] = mass Ba(OH)₂/ molar mass Ba(OH)₂ × liters of solution
[Ba(OH)₂] = 2.29 g/ 171.34 g/mol × 0.0466 L = 0.287 M
Step 2: Write the balanced neutralization equation
Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O
Step 3: Calculate the reacting moles of Ba(OH)₂
25.5 mL of 0.287 M Ba(OH)₂ react.
0.0255 L × 0.287 mol/L = 7.32 × 10⁻³ mol
Step 4: Calculate the reacting moles of HClO₄
7.32 × 10⁻³ mol Ba(OH)₂ 2 mol HClO₄/1 mol Ba(OH)₂ = 0.0146 mol HClO₄
Step 5: Calculate the concentration of HClO₄
0.0146 moles of HClO₄ are in 8.99 mL of solution.
[HClO₄] = 0.0146 mol/0.00899 L = 1.62 M
A certain first-order reaction is 27.5 percent complete in 8.90 min at 25°C. What is its rate constant?
Answer:
[tex]k= 0.145min^{-1}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out necessary for us remember that the first-order kinetics is given by:
[tex]ln(A/A_0)=-kt[/tex]
Whereas the 27.5% complete means A/Ao=0.275, and thus, we solve for the rate constant as follows:
[tex]k=\frac{ln(A/A_0)}{-t}[/tex]
Then, we plug in the variables to obtain:
[tex]k=\frac{ln(0.275)}{-8.90min}\\\\k= 0.145min^{-1}[/tex]
Regards!
Which of the following can be mixed in solution with NH3 to make a buffer?
Answer:
c. NaOH
Explanation:
just took the quiz
Sodium is a highly reactive metal and
chlorine is a toxic gas, but when they
come together the resulting material,
sodium chloride, is essential for life.
Which of the following is true when
sodium and chlorine are brought into
contact with one another?
Answer:
NaCl
Explanation:
[tex]na + cl > nacl[/tex]
This is also a salt
does light appears to travel in straight lines. travelling from light sources until it hits the surface of an object?? (Truer or False) if your answer is true then what is the reason why does light appears to travel in straight lines??.
Answer:
true once light has been produce it will keep travelling jn straight parts until it hits something else
What kind of magma produce the most violent eruptions
Answer:
Explosive eruptions from Composite or strato volcano
Explanation:
since they have multiple holes of exit, they can get pretty explosive.
describe how lyophobic sols are synthesize by dispersion method
Explanation:
For preparing lyophobic sol, the substance in bulk is broken down into particles of colloidal dimensions (Dispersion) or aggregating smaller particles into particles of colloidal dimensions (condensation).
please answer all if you can!
Answer:1.b 2.A (i think it might be c) 3 (i have no clue) 4.(no clue) Sorry i only got 1 and 2 witch i think are right its been a while sense i have done this....
Explanation:
What is the purpose of the scientific method?
Answer:
C. To remove any source of bias in an experience
How many moles of CO2 form when 4.0 mol of ethane, C2H6, react?
2C2H6 + 702 + 4CO2 + 6H20
A. 8 mol
B. 2 mol
C. 6 mol
D. 4 mol
Answer:
The amswer would be A due to the ratio between ethane and carbon dioxide being 1:2. Due to this, you double the moles that are reacting
what would be the mass of 44.8 L of CO2 gas at STP?
show work if possible
Answer:
[tex]m=88.02g[/tex]
Explanation:
Hello there!
In this case, for this ideal gas law problem, it turns out necessary for us to remember that one mole of any gas is contained in 22.4 L at STP and therefore, we can use the following ratio to calculate the moles in 44.8 L of CO2:
[tex]\frac{1mol}{22.4L} =\frac{x}{44.8L}\\\\x= \frac{1mol*44.8L}{22.4L}=2mol[/tex]
Finally, since the molar mass of CO2 is 44.01 g/mol, we calculate the mass as follows:
[tex]m=2mol*\frac{44.01g}{1mol}\\\\m=88.02g[/tex]
Regards!
Please help meeee?!!!!
Explanation:
A structure in which valence electrons are depicted by dots is called a lewis structure.
For example, atomic number of oxygen is 8 and its electronic distribution is 2, 6.
Hence, the electron dot structure for [tex]O_{3}[/tex] molecule is as depicted in the picture attached.
how many moles of neon gas have a volume of 0.84 L and a pressure of 4.6 atm at 222k
Answer:
n = 0.21 moles
Explanation:
Given that,
Volume, V = 0.84 L
Pressure, P = 4.6 atm
T = 222 K
We need to find the number of moles of Neon gas. We know that,
PV = nRT
Where
n is the number of moles
R i the gas constant, R = 0.08206 L-atm/mol-K
Put all the values,
[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{4.6\times 0.84}{0.08206 \times 222}\\\\n=0.21\ \text{moles}[/tex]
So, there are 0.21 moles of Neon gas.
Which statement shows why mass is conserved for this reaction? 2Mg + O2 → 2MgO
Answer:
The same number of each atom are on both sides of the equation.
The Law of conservation of mass states that matter is neither destroyed nor created in a chemical reaction. Therefore, the mass of the reactants will be equal to the mass of the products in a chemical reaction. According to the law matter is neither created nor destroyed in a chemical reaction.
Soda contains phosphoric acid (H3PO4). To determine the concentration of phosphoric acid in 50.0 mL of soda, the available phosphate ions are precipitated with excess silver nitrate as silver phosphate (418.58 g/mol). The dry Ag3PO4 is found to have a mass of 0.0576 g. What is the concentration of phosphoric acid in the soda?
Answer:
0.0270w/v% H3PO4 in the soda
Explanation:
All phosphates reacts producing Ag3PO4. To solve this question we must convert the mass of Ag3PO4 to moles. These moles = moles of H3PO4. We can find, thus, the mass of H3PO4 and the w/v% as follows:
Moles Ag3PO4 -Molar mass: 418.58g/mol-
0.0576g * (1mol / 418.58g) = 1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4
Mass H3PO4 -Molar mass: 97.994g/mol-
1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4 * (97.994g/mol) = 0.0135g H3PO4
w/v%:
0.0135g H3PO4 / 50.0mL * 100 =
0.0270w/v% H3PO4 in the sodaA coffee cup has a heat capacity of 62.6 - If the coffee cup's temperature increases by 1.20°C, how much heat has it
absorbed?
Select the correct answer below:
?
Answer:
75.12 J
Explanation:
Applying,
Q = CΔT................ equation 1
Where Q = amount of heat, C = Heat capacity, ΔT = temperature rise.
From the question,
Given: C = 62.6 J/K, ΔT = 1.20°C
Substitute these values into equation 1
Q = 62.6(1.20)
Q = 75.12 J
Hence the amount of heat it absorbed is 75.12 J
(Ch3ch2)2choh oxidize with k2cr2o7?
Which equation represents a combustion reaction?
2SO2 + O2 → 2SO3
Pb(NO3)2 + 2HCl → PbCl2 + 2HNO3
2C2H6 + 7O2 → 4CO2 + 6H2O
Ca + 2HCl → CaCl2 + H2
Answer:
2SO2 + O2 => 2SO3
Explanation:
Combustion reaction involves heating of a compound/element/substance in presences of oxygen.
The hydrogen fluoride molecule, HF, is more polar than a water molecule, H2O (for example, has a greater dipole moment), yet the molar enthalpy of vaporization for liquid hydrogen fluoride is lesser than that for water. Explain.
Answer:
Water forms more hydrogen bonds than HF
Explanation:
The answer to this question goes back to the idea of hydrogen bonding. Hydrogen bonding occurs when hydrogen is bonded to a highly electronegative atom such as fluorine or oxygen.
However, in HF, there are three lone pairs of electrons on fluorine atom and one hydrogen atom bonded to fluorine.
In H2O, there are two lone pairs of electrons on oxygen atom and two hydrogen atoms bonded to oxygen. This simply means that water can form four hydrogen bonds while HF only forms two hydrogen bonds.
This implies that H2O molecules possess more hydrogen bonding than HF molecules. Hence, the molar enthalpy of vaporization for liquid hydrogen fluoride is lesser than that for water.
An object with a mass of 0.255 kg and density of 2.89 g/cm^3 measures 34 mm in length and 46 mm in width. What is the height of the object?
1) 5.6 cm
2) 5.6•10^-2 cm
3) 7.2 •10^-4 cm
5.64 I think, I'm sorry if I'm wrong
There are four different starting molecules that one might use to synthesize the illustrated alkyl halide as the major product using an electrophilic addition reaction. Please draw all four of them.
Answer:
Explanation:
An electrophilic addition reaction occurs when an electrophile attacks a substrate, with the end result being the inclusion of one or many comparatively straightforward molecules along with multiple bonds.
In the given question, the hydrogen bromide provides the electrophile while the bromide is the nucleophile. The mechanism proceeds with the attack of the electrophile on the carbon, followed by deprotonation. This process is continued with a formation of carbocation and the bromide(nucleophile) finally bonds to the carbocation to form a stable product.
The first diagram showcases the possible various starting molecules for the synthesis while the second diagram illustrates their mechanism.
If you keep adding sugar to water and there comes a point that you cannot dissolve any more sugar to it then this is called
Answer:
.
Explanation:
Identify the isoelectronic elements.
i. Cl-, F-, Br-, I-, At-
ii. Ne, Ar, Kr, Xe, He
iii. N3-, S2-, Br-, Cs+, Sr2+
iv. N3-, O2-, F-, Na+, Mg2+
v. Li+, Na+, K+, Rb+,Cs+
Answer:
iv. N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺
Explanation:
Isoelectronic elements are those that have the same number of electrons. So, if at least 2 elements differ in their number of electrons, the series is not of isoelectronic elements.
To know the number of electrons we will consider the atomic number and add electrons if it is an anion and subtract electrons it is a cation.
Identify the isoelectronic elements.
i. Cl⁻, F⁻, Br⁻, I⁻, At⁻. NO. Cl⁻ has 18 electrons (17+1) and F⁻ has 10 electrons (9+1). ii. Ne, Ar, Kr, Xe, He. NO. Ne has 10 electrons and Ar has 18. iii. N³⁻, S²⁻, Br⁻, Cs⁺, Sr²⁺. NO. N³⁻ has 10 electrons (7+3) and S²⁻ has 18 (16+2).iv. N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺. YES. They all have 10 electrons v. Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺. NO. Li⁺ has 2 electrons (3-1) and Na⁺ has 10 (11-1).HELLP I NEEED HELP NOWW NO GUESSING FRFR
What will happen when a piece of magnesium metal is dropped into a beaker
containing a 1 M solution of copper(II) chloride?
Mg2+ + 2e → Mg(s) ° =- 2.37 V
Cu2+ + 2e → Cu(s) £° = + 0.34 V
Why can characteristics properties be used to identify unknown substances
Characteristic properties are used because the sample size and the shape of the substance does not matter.
Project: Global Temperature Change
Research and write an essay about the rise of global temperatures over the past century.
PLEASE HELP THIS IS 10% OF MY GRADE
Answer:
Im sorry i cant write a whole essay right now but these sourcea could help.
https://climate.nasa.gov/effects/
https://www.climate.gov/news-features/understanding-climate/climate-change-global-temperature
Answer:
have you done it yet?
Explanation:
..
The molecular formula of water is H, O. What does it express
Answer:
Firstly, the molecular formula of water would be H2O. Secondly, it expresses the amount of different atoms in the water molecule. In this case, H2 would be two Hydrogen atoms, and O would be 1 Oxygen atom.
Explanation:
Hope this helped!
Answer:
It basically means that water contains 2 atoms of Hydrogen and 1 atom of Oxygen.
It also expresses that the valency of Oxygen is 2 and water has more Hydrogen than Oxygen