✔ Question 1
Below is a picture of the rock strata of a mountain.
What can you infer about the layers in this picture?

Increasing order of boiling point of the given molecules is

Benzene< Benzaldehyde<Phenol<Benzoic acid.

Boiling point is directly proportional to intermolecular forces.

The intermolecular forces present in the given molecules are.

so, as benzene is nonpolar , only weak london dispersion force is present. Hence boiling point of benzene is least among the given molecules. Benzaldehyde is polar, so dipole -dipole force is also present. But no H-bonding is present. Hence, boiling point of benzaldehyde is less than that of phenol and benzoic acid. Now, both phenol and benzoic acid is polar as well as they can form H-bonding. But phenol can only form intermolecular hydrogen bonding, but benzoic acid can form both intermolecular as well as intramolecular H bonding. So it can exist as dimer. The presence of dimer further strengthen the vander Waals dispersion forces , that increases the boiling point of Benzoic acid.

Hence increasing order of boiling point of the given molecules is

Benzene< Benzaldehyde<Phenol<Benzoic acid.

Learn more about boiling point here:

https://brainly.com/question/40140

#SPJ4

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, gems have ionic bonding and plastic beads have covalent bonding.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. Gems  have ionic bonds formed between metals and nonmetals. Plastic beads, will have covalent bonds because it is easily deformed.

Therefore, gems have ionic bonding and plastic beads have covalent bonding.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ1

Potential Energy is the form of energy contained in dam.

Total energy:

The total energy of each considered object is the sum of its potential energy (P.E) and kinetic energy (K.E) and is constant throughout motion. For example, at finite height, a ball has maximum potential energy and zero kinetic energy, and when released, K.E increases and becomes maximum at ground level, and P.E decreases to zero at ground level. , so the total energy increases. There is movement of the ball in the same way everywhere. The energy that an object has due to its motion is called kinetic energy, and the energy that an object has due to its position and shape is called potential energy.

Here the water dammed by the dam has a certain potential height. This means that water has latent energy because it is located far from the bottom. Therefore, water dammed up by a dam has potential energy.

Potential Energy:

In physics, potential energy is the energy possessed by an object due to its position relative to other objects, its own tension, electrical charge, or other factors. Common types of potential energy are the gravitational potential energy of a body, the elastic potential energy of an extended spring, and the electrical potential energy of an electric charge in an electric field. The unit of energy in the International System of Units (SI) is the joule, and the symbol is J.

Learn more about Potential Energy:

https://brainly.com/question/24284560

#SPJ4

The enthalpy of vaporization for this compound is 22.0 kJ/mol.

Vaporization is a process in which a liquid or solid is transformed into a gaseous state. It occurs when molecules in the liquid or solid absorb enough energy to break their intermolecular bonds and become a gas. This process can be carried out either through the application of heat or pressure, or through a process known as sublimation, which occurs when a solid is exposed to a vacuum.

ΔHₙ = ΔHₓ - ΔHₐ

Where, ΔHₙ = Enthalpy of vaporization

ΔHₓ = Enthalpy of sublimation (32.4 kj/mol)

ΔHₐ = Enthalpy of fusion (10.4 kj/mol)

ΔHₙ = 32.4 - 10.4

ΔHₙ = 22.0 kJ/mol

The enthalpy of vaporization for this compound is the difference between the enthalpy of sublimation and the enthalpy of fusion. Therefore, the enthalpy of vaporization for this compound is 22.0 kJ/mol.

To learn more about vaporization
https://brainly.com/question/24258
#SPJ4

The formula unit of a salt that is not correct is [tex]Ca_{2} O[/tex] in option C.

A salt is almost always made up of a metal and a nonmetal element. The salts as we know them are mostly ionic in nature and they are known to be able to dissolve in solution when they are put into solution.

We know that the salt that they meant to show in option C is calcium oxide and the foregoing can not be the correct formula since both the calcium and the oxygen ions are divalent. The correct formula of the salt would be CaO.

Learn more about ionic salts:https://brainly.com/question/14515128

#SPJ1

Answer:

Explanation:She was wrong

The correct molecular formula for the compound magnesium chromate pentahydrate is as follows: MgCrO₄•5H₂O.

Molecular formula in chemistry is a notation indicating the number of atoms of each element present in a compound.

Chemical or molecular formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs.

The chemical formula also reveals information about the types and number of atoms that make up a chemical compound or molecule.

For example; a chemical compound named magnesium chromate pentahydrate will have a chemical formula of MgCrO₄•5H₂O.

This tells us that the compound contains magnesium, chromium, oxygen, and hydrogen atoms.

Learn more about molecular formula at: https://brainly.com/question/28647690

#SPJ1

Nuclear Fission include used in nuclear power plants and byproducts have long half-lives, Nuclear fusion includes occurs on the sun and needs very high temperatures, while Nuclear fission and Nuclear fusion includes release lots of energy.

Nuclear fission is a physico chemical process caused when an atom divides into two smaller atoms, which released important amounts of energy and it is used to generate electricity in nuclear power plants.

Conversely, Nuclear fusion occurs when smaller atoms such as hydrogen fuse to form larger atoms, which is able to generate much more energy when compares to Nuclear fusion, and this process fuel energy in the sun.

Therefore, with this data, we can see that fission nuclear and fusion nuclear are very different processes in terms of the division of fusion of atoms and they release differential amounts of energy.

Learn more about  Nuclear fission here:

https://brainly.com/question/3992688

#SPJ1

The apple farmer is able to obtain 8,034.6 oranges by trading 0.64 of his orchard.

A word problem is a mathematical exercise where significant background information on the problem is presented in ordinary language rather than in mathematical notation

First, let's find the total number of apples produced by the orchard:

20 trees × 418 apples/tree = 8,360 apples

Now, let's find the number of apples that the apple farmer is able to trade: 8,360 apples × 0.64 = 5,350.4 apples

Since the apple farmer wants to trade 3 oranges for every 2 apples, he will be able to obtain:

3 oranges / 2 apples ×  5,350.4 apples = 8,025.6 oranges.

Therefore, the apple farmer is able to obtain 8,025.6 oranges by trading 0.64 of his orchard.

Learn more about word problems on:

brainly.com/question/1781657

#SPJ1

The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.

A compound's molar mass, which is measured in grams per mole, specifies how much of a given material weighs in one mole. In other terms, the molar mass is the sum of the masses of all the atoms that make up a mole of a certain molecule, expressed in grams. As a result, the molar mass is measured in grams/mole.

The compound's molar mass is expressed in grams per mole, or g/mol. The mass of 1 mol, expressed in the SI as g/mol, is the definition of the molar mass. Example: Water has a molar mass of 18.016 g/mol.

Thus, The molar mass of the substance is needed to convert between the moles of a given sample of a substance and its mass in grams.

To know more about molar mass refer to:

https://brainly.com/question/837939

#SPJ1

The complete question is as follows:

What quantity is needed to convert between the moles of a given sample of a substance and its mass in grams?

a the molar mass of the substance

b the density of the substance

с the physical state of the substance

d all of the above

Answer:

4.98 x 10^-18 mole

Explanation:

1 mole has 6.022 x 10^23 particles

so 3,000,000/(6.022 x 10^23) = 4.98 x 10^-18 mole

Answer:

thermometers

Explanation:

Answer: thermometer

Explanation: trust me ;)

Magnesium and calcium are 2nd group elements with 2 valence electrons. They are metals in room temperature and easily lose these electrons to nonmetals such as oxygen.

Magnesium is 12th element in periodic table. It is 2nd group element and is a called alkaline earth metals. Its group members are calcium, strontium, and barium.

They contains 2 valence electrons which can be easily lost to a non-metal. Oxygen is highly electronegative element and it contains 6 valence electrons and need two more electrons to achieve octet.

Al is 13th group element it is not as much electropositive as alkaline earth metals. It contains 3 valence electrons and thus it need to lose all these 3 electrons to achieve octet. Hence, Al is less reactive towards O2 in comparison with Mg and Ca.

To find more on metal oxides, refer here:

https://brainly.com/question/22966565

#SPJ1

o-xylene, m-xylene, and p-xylene are structural isomers.

o-xylene, m-xylene, and p-xylene are examples of aromatic isomers, also known as ortho-, meta-, and para-xylene, respectively. These isomers are classified as aromatic because they are part of a family of compounds known as aromatic hydrocarbons, which contain a ring of six carbon atoms bonded to each other in a specific way.

o-xylene, m-xylene, and p-xylene are also examples of structural isomers. Structural isomers are compounds that have the same molecular formula but differ in the arrangement of their atoms. In the case of o-xylene, m-xylene, and p-xylene, the atoms are arranged differently around the ring of six carbon atoms.

o-xylene, m-xylene, and p-xylene are not optical isomers, which are also known as enantiomers. Optical isomers are compounds that are mirror images of each other but are not superimposable. Optical isomers are important in medicinal chemistry because they can have different biological properties even though they have the same molecular formula and structure.

o-xylene, m-xylene, and p-xylene are also not geometric isomers. Geometric isomers are compounds that have the same molecular formula and the same arrangement of atoms, but differ in the orientation of their atoms or groups of atoms in space. Geometric isomers are often found in compounds with cis-trans double bonds or ring structures.

The initial and final states if an electron in hydrogen emits a photon with a wavelength of 656 nm  is n = 3 to n = 2.

given that :

wavelength of the photon emitted λ = 656 nm = 656 × 10⁻⁹ m

the energy of the photon is given as :

E = hc / λ

  = (6.626 × 10⁻³⁴ × 3 ×10⁸ ) / 656 × 10⁻⁹

  = 3 × 10⁻¹⁹ J  = 1.9 eV

En = - 13.6 / n² eV

where n = 1,2,3 ....

1) n = 2 to n = 1

E2 - E1 = - 13.6 eV ( 1 / 4 - 1/ 1)

           = 10.2 eV

2) n = 3 to n = 2

E3 - E2 = -13.6 eV ( 1/3² - 1/ 2² )

            = 1.9 eV

Thus the initial and the final states are n = 3 to n = 2.

To learn more about wavelength here

https://brainly.com/question/29892125

#SPJ4

Neil Bohr used the fluorescent screen and an alpha particle detector to study the structure of an atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

The atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

The concentration measures will change in value as the temperature of a solution changes is molarity. The correct option is 4.

The molarity of a substance refers to how much of it is present in a given volume of solution (M). Molarity is the measure of how many moles of a solute are present per liter of a solution. Molarity is also referred to as a solution's molar concentration.

To find the equation for molarity, divide the volume of solvent used to dissolve the given solute by the number of moles of that solute. M = n V

Since the volume of the solution rises as the temperature rises, molarity decreases. Therefore, molarity is normally affected when therefore is a change in temperature of a solution either when it increases or decreases.

Learn more about molarity below.

https://brainly.com/question/14469428

#SPJ1

The material with the lower boiling point vaporizes first when heated, then condenses and collects.

The heat that is generated during the condensation process of higher boiling vapor is what leads to the process of vaporization. Because it has such a huge surface area, the packing enables vapors to move freely between the ascending and descending directions. In the process of evaporation, the vaporization happens at a temperature lower than the boiling point, whereas in the distillation process, the vaporization happens at the boiling point.

To know more about boiling point click on the link below:

https://brainly.com/question/40140

#SPJ4

The principle quantum number(n) for this atom is 5

The position in an atom's shells and the size of an electron orbital are described by the primary quantum number, which is the most significant. The quantum number connected to the angular momentum of an atomic electron is called the azimuthal quantum number.

The energy of the electron in a hydrogen atom [tex]E_{n} = -0.544eV[/tex]

For hydrogen, Z = 1

The principal quantum number for [tex]n[/tex] for this atom is calculated by for this atom is determined using Bohr's atomic model,

So that [tex]E_{n} = \frac{-13.6(Z)^{2}}{n^{2}}eVatom^{-1}[/tex]

Where [tex]n[/tex] is the principal quantum number, [tex]E[/tex] is the energy, and [tex]Z[/tex] is the atomic number The values are substituted,

=> [tex]-0.544eV = -\frac{13.6(1)^{2}}{n^{2}} eVatom^{-1}[/tex]

[tex]n^{2} = -\frac{13.6}{-0.544} \\n^{2} = 25\\n = 5[/tex]

Learn more about Bohr's atomic model:

brainly.com/question/18642660

#SPJ4

Answer:

D.

Explanation:

Temperature differences among layers of the atmosphere is the cause for global winds

Mg3 (Si,03),(OH),  is the chemical formula for talc: an analytical chemist has determined by measurements that there are  90.4 moles of magnesium and 2.43 moles of oxygen in a sample of talc.

Talcum powder is formed from talc. Talc is a mineral created up primarily of metallic element, silicon, and oxygen. As a powder, it absorbs wet well and helps weigh down on friction, creating it helpful for keeping skin dry and serving to forestall rashes.This mineral is employed as a thickening agent and stuff. It's an ingredient in ceramics, paints, and building material.

Talc is a hydrous magnesium sheet salt with the statement Mg3Si4O10(OH)2. The elementary sheet consists of a layer of magnesium-oxygen/hydroxyl octahedra, sandwiched between 2 layers of siliconoxygen tetrahedra.

To learn more about Talc here

brainly.com/question/24082743

#SPJ4

The rate of appearance of o2 at that moment is 2.80 mol/min.

Calculation :

Recall

aA+bB→ cC+dD

[tex]\frac{d[A]}{a.dt}[/tex] =  [tex]\frac{d[B]}{b.dt}[/tex] =  [tex]\frac{d[C]}{c.dt}[/tex]  =  [tex]\frac{d[D]}{d.dt}[/tex]

Then

[tex]\frac{d[NO_{2} ]}{2.dt}[/tex] =   [tex]\frac{d[NO_{2} ]}{4.dt}[/tex]

Replacing :

[tex]\frac{1.4}{2}[/tex] =   [tex]\frac{d[NO_{2} ]}{4.dt}[/tex]  .......   [tex]\frac{d[NO_{2} ]}{dt}[/tex] = 2.8

Degradation is the first step in the recycling of nutrients that an organism (plant or animal) uses to build its body. This is the process by which dead tissue is broken down and transformed into simpler organic forms.They are the food source for many species that underlie ecosystems.

Decomposition or putrefaction is the process by which dead organic matter breaks down into simple organic or inorganic matter such as carbon dioxide, water, simple sugars and inorganic salts. This process is part of the nutrient cycle and is essential for recycling the finite substances that occupy the physical space of the biosphere. An organism's body begins to decompose shortly after death. Animals such as earthworms also help break down organic matter.

Learn more about decomposition here : https://brainly.com/question/27746877

#SPJ4

Answer:

5

Explanation:

fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).

Answer:

salad

Explanation:

When total ammonium ion is 50% dissociated, The pH is 9.25.

Given, the pKₐ of ammonium ion (NH₄⁺) is 9.25.

The dissociation of NH₄⁺ to ammonia (NH₃) and H⁺ in aqueous solution is represented below.

It is stated that the ammonium ion is 50% dissociated in the solution. Therefore the concentration of each species at that instant [if started with 1M conc. of NH4+ (aq)] is summarized as follows:

                                              NH4+ (aq) ⇌ NH3 (aq) + H+ (aq)

Initial conc. (in M)                     1                   -                 -

At 50% dissociation 1-0.5, i.e., 0.5          0.5          0.5

The given value of pKₐ immediately reminds us of the form of Henderson-Hasselbalch equation containing pKₐ , i.e.,

pH = pKₐ + log₁₀ [tex]\frac{[salt]}{[acid]}[/tex]  _ _ _(i)

But, NH₄⁺ (aq) exists as the conjugate acid form, as well as the salt (ionized) form. Hence, we cannot use equation. (i) for our calculations.

Therefore, we need to convert the above value of Kₐ to the equivalent Kb (for NH₃), corresponding to the reverse equilibrium.

This is achieved by using the relation

Kb = [tex]\frac{Kw}{Ka}[/tex]

or,  -log₁₀ Kb = -log₁₀ Kw + log₁₀ Ka

or,  pKb = pKw - pKa = 14 - 9.25 = 4.75

where, pKw = 1 x 10⁻¹⁴ (at 298 K).

Therefore, pKb of ammonia (NH₃) = 4.75

Now, we need to use the form of Henderson-Hasselbalch equation which uses Kb; which is in fact

pOH = pKb + log₁₀ [tex]\frac{[salt]}{[base]}[/tex]  _ _ _(ii)

where the salt is NH₄⁺, and the base is NH₃. Further, we know that

Kw = [H⁺][OH⁻]  or,  pOH + pH = pKw = 14    or,   pOH = 14 - pH

Substituting this relation in eq. (ii) gives

14 - pH = pKb + log₁₀ [tex]\frac{[NH4+]}{[NH3]}[/tex]

or, pH = 14 - pKb — log₁₀ [tex]\frac{[NH4+]}{[NH3]}[/tex]

As calculated, pKb = 4.75, [NH₄⁺] = 0.50 M, while [NH₃] = 0.50 M, assuming we start with a conc. of 1M NH₄⁺. Hence,

pH = 14 – 4.75 – log₁₀ [tex]\frac{0.50}{0.50}[/tex]

     = 9.25 - log₁₀ ( 1 )

     = 9.25 - 0

pH = 9.25

Hence, the pH of a solution consisting of 50% NH₃ and 50% NH₄⁺ will be equal to 9.25.

To learn more about pH calculations, Here :

https://brainly.com/question/27991105?referrer=searchResults

#SPJ4

The amount, in moles, of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] would be 6 moles.

[tex]MgCl_2[/tex] is made from magnesium and chlorine molecules according to the following equation:

[tex]MgCl_2 --- > Mg^{2+} + 2Cl^-[/tex]

From the above equation, 1 mole of [tex]MgCl_2[/tex] is made up of 1 mole of Mg and 2 moles of Cl.

Following this established ratio, the amount of chlorine that would be present in 3 moles of  [tex]MgCl_2[/tex] can be calculated as follows:

1 mole [tex]MgCl_2[/tex] = 2 moles of Cl

3 moles  [tex]MgCl_2[/tex] = 2 x 3/1

                           = 6 moles of Cl

In other words, 6 moles of Cl would be present in 3 moles of [tex]MgCl_2[/tex].

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

Answer: Diurnal temperature range is the difference between __maximum______ and ____minimum____ temperature each ___1 day______.

Explanation:

Sp[tex]3[/tex] hybridization of a molecule with two lone pairs is present. This molecule's geometry is determined by its electron pair structure. If more than one bond angle is possible, separate each one with a space.

To learn more about valence bond theory refer to:

https://brainly.com/question/23129240

#SPJ4

Answer + Explanation:

During a car crash, kinetic energy is lost through various forms of deformation of the vehicle and the generation of heat.

When a car collides with another object, the force of the impact causes the vehicle's body and structure to deform. This deformation absorbs some of the kinetic energy and converts it into other forms of energy, such as heat and sound.

In addition, friction between the moving parts of the car and between the car and the road can also generate heat, which absorbs some of the kinetic energy.

The amount of kinetic energy lost during a car crash depends on the mass of the vehicle, the speed at which it was traveling, and the type and severity of the collision. In general, higher speeds and more severe collisions result in greater kinetic energy loss.

Protein synthesis is a process that is generated within cells where different organelles and genetic components are involved through which proteins are generated.

The biosynthesis of proteins will be given by different parts, beginning with the translation of the genetic material. It will be given by different steps:

1. mRNA binds to ribosomes and the aminoacyl-tRNA to be associated to the first codon of the mRNA is associated.

2. The elongation of the polypeptide chain occurs, in which the amino acids are joined

3. The elongation is finished when the termination codons are reached.

4. The translation components are released and post-translational modifications are started.

5. The folding, glycosylation and modification of amino acids occur

6. Finally, the protein is released to generate its function

To learn more about protein synthesis visit: https://brainly.com/question/29765585

#SPJ1