Answer: I don't know if this helps but here's some information I think might help.
Usually, cells will take between 5 and 6 hours to complete S phase. G2 is shorter, lasting only 3 to 4 hours in most cells. In sum, then, interphase generally takes between 18 and 20 hours. Mitosis, during which the cell makes preparations for and completes cell division only takes about 2 hours. Calculate the percentage of time spent in each phase by counting the total number of cells in each phase (total in interphase, in prophase, etc.) and dividing each by the total number of cells you counted. How do cancer cells differ in total time required for mitosis? Cancer cells produce 117 minutes faster than regular cells. ... Normal cells require 640 minutes during interphase, cancer cells only need 380. For prophase, cancerous cells need 15 minutes less than regular cells. Another hallmark of cancer cells is their "replicative immortality," a fancy term for the fact that they can divide many more times than a normal cell of the body. In general, human cells can go through only about 40-60 rounds of division before they lose the capacity to divide, "grow old," and eventually die 3.
In the Periodic Table, the vertical columns that extend down the Periodic Table are called
A. periods.
B. Groups.
C: Classes
D: Rows
Answer:
b
Explanation:
True or False: If you find the percent by mass of all of the elements in a compound, it will always add up to exactly 100.00%
Answer: true
Explanation: because Mass percentage composition is found by calculating a fraction of the total mass by each element present in a compound. The whole compound itself would equal one or 100% in all the elements that make it up would only be a fraction, so it will always have to add up to 100%
Weathering, erosion, and deposition act together in a cycle that wears down
and builds up Earth's surface. true or false???
Answer:
The answer is true. Hope this helps
Convert 2.5x10^6mm to km
Answer:
2.5 kilometers
Explanation:
I GIVE BRAINLIEST IF YOU ANSWER!
Which of these is a characteristic of warm air? (5 points)
a It transfers energy through radiation.
b Its molecules are far apart.
c It sinks due to convection.
d It cools the land below i
Answer:
B.
Explanation:
The air molecules of warm air has higher energy. It causes them to move away from each other
On hot days, you may have noticed that potato chip bags seem to “inflate”, even though they have not been opened. If I have a 250 mL bag at a temperature of 19 0C, and I leave it in my car which has a temperature of 600 C, what will the new volume of the bag be? will give brainliest
The new volume of the bag : 747.43 ml
Further explanationCharles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
V₁=250 ml
T₁=19+273=292 K
T₂=600+273=873 K
[tex]\tt V_2=\dfrac{V_1.T_2}{T_1}\\\\V_2=\dfrac{250\times 873}{292}\\\\V_2=747.43~ml[/tex]
Calculate the number of milliliters of 0.440 M KOH required to precipitate all of the Fe2+ ions in 187 mL of 0.692 M FeSO4 solution as Fe(OH)2. The equation for the reaction is: FeSO4(aq) + 2KOH(aq) Fe(OH)2(s) + K2SO4(aq)
Answer:
588.2 mL
Explanation:
FeSO₄(aq) + 2KOH(aq) → Fe(OH)₂(s) + K₂SO₄(aq)First we calculate how many Fe⁺² moles reacted, using the given concentration and volume of FeSO₄ solution (the number of FeSO₄ moles is equal to the number of Fe⁺² moles):
moles = molarity * volume187 mL * 0.692 M = 129.404 mmol Fe⁺²Then we convert Fe⁺² moles to KOH moles, using the stoichiometric ratios:
129.404 mmol Fe⁺² * [tex]\frac{2mmolKOH}{1mmolFeSO_4}[/tex] = 258.808 mmol KOHFinally we calculate the required volume of KOH solution, using the given concentration and the calculated moles:
volume = moles / molarity258.808 mmol KOH / 0.440 M = 588.2 mLWhat Phase is water at 120 degrees Celsius?
What is true about matter in a chemical reaction? *
None of these statements are true.
Matter can be created or destroyed.
Matter can sometimes be created or destroyed.
Matter cannot be created or destroyed.
Answer:
the last option,matter cannot be created or destroyed
A mixture consists of 28% oxygen, 14% hydrogen, and 58% nitrogen by volume. A sample of this mixture has a pressure of 4.0 atm in a 9.6 L container at 300 K temperature. This mixture is run through a gas filter, which removes the hydrogen from this system. The gas is placed back into the 9.6 L container. How many moles of gas are left in the container? A) 4.2 mol B) 2.6 mol C) 1.3 mol D) 3.9 mol
Answer:
C) 1.3 mol
Explanation:
Using gas law we can find the initial moles of the sample of the mixture, as follows:
PV = nRT
PV / RT = n
Where P is pressure: 4.0atm
V is volume: 9.6L
R is gas constant: 0.082atmL/molK
T is absolute temperature: 300K
And n are moles of the gas
PV / RT = n
4.0atm*9.6L / 0.082atmL/molK300K = n
n = 1.56moles of the mixture of the gas are present into the 9.6L container
Now, 14% of this gas is hydrogen that was removed of the system, that is:
1.56mol*14% = 0.22 moles of hydrogen are removed.
Thus, moles of gas that remains in the container are:
1.56mol - 0.22mol = 1.34mol.
Right answer is:
C) 1.3 molAnswer:
C = 1.3
Explanation:
I just took the exam and got it right.
5. An anion of carbon C-4 has how many electrons?
a. 6
b. 8
C. 9
d. 10
Answer:
A.6
Explanation:
An atom of carbon can share four electrons. Carbon has a total of six electrons, with two in the first orbital and four in the second orbital.
Which statement about the alkali metals is correct?
A. They are usually gases.
B. They are extremely unreactive.
C. They are located in the left-most column of The Periodic Table
D. They form negative ions with a -1 charge
Answer:
its c they are located in the left most column of the periodic table
any help would be much appreciated, i'm being timed :( i'll mark brainliest and 5 star
Answer:
GROUP 16
Explanation:
Answer:
group 2
Explanation:
50 POINTS?!!!!!!
Which of the following is an example of a chemical change?
a. freezing water to make ice.
b. a firework exploding.
c. breaking a glass bottle.
d. melting gold jewelry to make a gold bar.
Answer:
b. a firework exploding
Explanation:
As we approach fall, the trees begin to drop their leaves. If a leaf, with a mass of 0.00006 kg, drops 3.66 meters from the top of a tree and the acceleration due to gravity is 9.81 m/s2. Calculate the force at which the leaf will hit the ground.
(F = m * a)
Which energy transformation produces electricity and is least likely to negatively impact the environment?
A) Generating electricity from a natural gas-fired power plant
B) Generating electricity from a coal-fired power plant
C) Generating electricity from a nuclear power plant
D) Generating electricity from a solar panel system
Hello!
The answer to this question is: D) Generating electricity from a solar panel system.Thank you for asking this question!
It would be greatly appreciated if you thanked me and marked me as the brainliest!
Have an amazing day.
The energy transformation which produces electricity and is least likely to
negatively impact the environment is generating electricity from a solar
panel system.
Generating electricity from solar panel involves the use of solar energy from
the sun to generate electricity . This type of energy doesn't emit any type of
harmful radiation or release toxic compounds into the atmosphere which
makes it the least likely to negatively impact the environment.
Other options emit any type of harmful radiation or release toxic compounds
into the atmosphere which makes option D the most appropriate.
Read more on https://brainly.com/question/11867576
ANSWER ASAP!
How does a combustion reaction form?
What is specific heat? How are the factors affecting it?
Answer:
Specific heat, ratio of the quantity of heat required to raise the temperature of a body one degree to that required to raise the temperature of an equal mass of water one degree.
Explanation:
by dividing the heat capacity by the quantity of substance in a body, the resulting specific heat capacity is a function of the structure of the substance itself. In particular, it depends on the number of degrees of freedom that are available to the particles in the substance, each of which type of freedom allows substance particles to store thermal energy.
How do I balance these?
Answer:
[tex]1S_{8} +12O_{2}=8SO_{3}[/tex]
[tex]2Al+6HCl=2AlCl_{3} +3H_{2}[/tex]
[tex]2Fe+3Cl_{2}=2FeCl_{3}[/tex]
[tex]2K+1Cl_{2}=2KCl[/tex]
Explanation:
How are organisms organized from simple to complex?
Answer:
The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere
Explanation:
Answer:
i do believe that the answer above mine is correct
Explanation:
i know this was a few months ago but i think that person deserves brainliest
hope everyone is having an amazing day <3
Which organelle captures sunlight and helps in food synthesis?
Answer:
Chloroplasts! :)
Explanation:
Hope this helps
How many significant digits would you report an answer to if you divided 2.654 by 3.2?
answer choices
1
2
3
4
Answer:1
Explanation:
How does the ionosphere help radio transmission?
Explanation:
ionosphere can reflect radio waves directed into the sky back toward the Earth
Which of the following redox conditions will produce a spontaneous reaction?
A. The voltage of the reduction half-reaction is negative.
B. The voltage of the reduction half-reaction is positive.
C. The sum of the voltages of the half-reactions is negative.
D. The sum of the voltages of the half-reactions is positive.
Answer:
D. The sum of the voltages of the half reactions is positive.
Explanation:
It's correct on apeex
The statement, that describes the redox conditions will produce a spontaneous reaction is "the sum of the voltages of the half-reactions is positive."
What is spontaneous reaction?A spontaneous reaction is one that favors the creation of products under the conditions of the reaction. It can move in a specific direction without being propelled by an external source of energy. If the standard electrode potential for the redox reaction is positive, the reaction is spontaneous.
If [tex]E^{0}[/tex] (redox reaction) is positive, the reaction will move onward (spontaneous). The redox conditions will cause a spontaneous reaction, and the sum of the half-reaction voltages is positive. Hence the correct option is D.
Learn more about spontaneous reaction here
https://brainly.com/question/13790391
#SPJ2
1. Which of the following is Newton's First Law? *
A-An object in motion will stay in motion unless acted on by a balanced force.
B-An object at rest will stay at rest and an object in motion will stay in motion in the same speed and same direction unless acted on by an unbalanced force.
C-Moving objects will stay in motion forever
Answer:
B .............
hope it helps
Answer: B
Explanation:
The atmosphere insulates the planet by trapping in
Help please! What is the number that can balance the equation KClO3 → 2KCl + 3O2?
Answer:
2KClO3 → 2KCl + 3O2 is balanced equation
Explanation:
7.62 x 10^23 molecules of CO2 are contained in a tire. How large is the tire (in liters)?
Answer: 7.62e+23
Explanation:
Assignment Summary For this assignment, you will construct a scientific model of the water cycle to show how water is recycled through an ecosystem. Once you have drawn your model on a poster board, you will write one to two paragraphs explaining how water is transferred within and between organisms and the environment. Background Information Water is a very important compound. Organisms need water to carry out life-maintaining processes such as growth and development. Without water, living things will not survive. Water continually flows among the atmosphere, land, water, and living organisms. This process, called the water cycle, allows water to be recycled as it moves through Earth’s spheres. Materials Assignment Instructions Step 1: For this project, you are expected to submit the following: 1. Your model of the water cycle 2. One to two typewritten paragraphs describing the water cycle Step 2: Prepare for the project. a) Read through the guide before you begin so you know the expectations of this project. Pay particular attention to the instructions you need to follow to create a model on your poster board. b) If anything is not clear to you, be sure to ask your teacher. Step 3: Gather materials for the model. a) Start with a blank poster board. Be sure to put your name on it. b) You may either draw the parts of the water cycle or print images to construct a model on your poster board. Gather any drawing tools that you will need, or print any images you want to use. Step 4: Create a model of the water cycle. a) Your model should include bodies of water such as lakes and oceans, organisms, air, and land. b) Draw arrows indicating how water moves within an ecosystem and between organisms and their environment. Be sure to include the Sun and gravity in your model. c) Include short phrases on your poster that summarize what occurs at each stage of the water cycle. Large poster board Markers, crayons, or colored pencils Scissors Glue or tape Student Guide (continued) Step 5: Write a paragraph describing the water cycle. a) Type one to two paragraphs describing the full water cycle. Be sure to use full sentences and proper grammar.
Answer:
the water cycle is a system that goes through evaporation then the water goes into the clouds and rains down as preparation
Explanation:
thats the cycle but if I were u I would do more Reasearch
Write a essay on endangered animals
A: Inquiring and analysing
i. explain and justify the need for a solution to a problem
ii. state and prioritize the main points of research needed to develop a solution to the problem
iii. describe the main features of an existing product that inspires a solution to the problem
iv. present the main findings of relevant research
B: Developing ideas
i. develop a list of success criteria for the solution
ii. present feasible design ideas, which can be correctly interpreted by others
iii. present the chosen design
C: Creating the solution
i. outline a plan, which considers the use of resources and time, sufficient for peers to be able to follow to create the solution
ii. demonstrate excellent technical skills when making the solution
iii. follow the plan to create the solution, which functions as intended
iv. list the changes made to the chosen design and plan when making the solution
D: Evaluating
i. outline simple, relevant testing methods, which generate data, to measure the success of the solution
ii. outline the success of the solution against the design specification
iii. outline how the solution could be improved
iv. outline the impact of the solution on the client/target audience
I WILL IDMEADIITLY MARK U AS BRAINLIESTTT
Answer:
WHATS OOP Lucy???
