A particular electric car is supplied with 300 kJ of chemical energy by the battery. Of this, a total of 70.5 kJ of energy is wasted as heat.
Calculate the overall efficiency of the electric car.

Answer:

The wavelength of the photon that would have the same momentum as the electron is 202.2180996 nm

Explanation:

The velocity of the electron, v = 3.6 × 10³ m/s

The momentum of an electron, [tex]p_e[/tex] = m × v

Where;

v = The mass of the electron = 9.109 × 10⁻³¹ kg

∴ [tex]p_e[/tex] = 9.109 × 10⁻³¹ kg × 3.6 × 10³ m/s = 3.27924 × 10⁻²⁷ kg·m/s

According to the de Broglie equation, the momentum of a photon, p, is given as follows;

p = h/λ

Where;

h = 6.63 × 10⁻³⁴ J·s

λ = The wavelength of the photon

∴ λ = h/p

According to the question, we have;

p = [tex]p_e[/tex] = 3.27924 × 10⁻²⁷ kg·m/s

∴ λ = 6.63 × 10⁻³⁴ J·s/(3.27924 × 10⁻²⁷ kg·m/s) = 2.02180993 × 10⁻⁷ m

The wavelength of the photon, λ = 2.02180993 × 10⁻⁷ m = 202.2180993 × 10⁻⁹ m = 202.2180993 nm.

The process of PLACING a compass wherever you want it involves Biology.  Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.

Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.

Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.

A magnetic field is generated by the field lines originating from a magnet or an electrical  coil. The moving current is always associated with a magnetic field.

A compass acts as a tiny magnet and it deflects to the north in  the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.

The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.

Find more on magnetic properties:

https://brainly.com/question/4242549

#SPJ2

you need the number of seconds to calculate the distance. I'm assuming that the seconds were written in the question but you forgot to write the here, you can calculate the distance then and find the exact point where the cyclist stopped since you have the circumference. then you can find the angle (after finding the distance he cycled) by subtracting it from 360 since the circular path will have an angle of 360 degrees.

Although your question lacks some data A general answer is provided :

The angle made vertically  = 360° - x°

where x = angle at which the the cyclist stopped

and circumference of the circular path = Total Distance travelled by the cyclist

First step : determine the distance travelled by the cyclist vertically

circumference = 2*π*r

343 = 2*π * r

∴ r = 343 / ( 2π ) = 54.59

therefore distance travelled by the cyclist vertically = 54.59 * 2 = 109.18 m

Given that the time travelled is missing

assuming the angle to the distance travelled by the cyclist before it stopped vertically = 360° - x°  

This is because the Total angle of a circular path = 360°

Learn more about circular paths : https://brainly.com/question/24210487

Answer:

A) How the size of a tree affect the bird species that prefer to live in it

Explanation:

I took the quiz

Answer:

Three

Explanation:

I hope this helps:)

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

Answer:

[tex]{ \bf{mechanical \: adv = \frac{load}{effort} }}[/tex]

Answer:

Scattering of light is the phenomenon in which light rays get deviated from its straight path on striking an obstacle like dust or gas molecules, water vapours etc. Scattering of light gives rise to many spectacular phenomena such as Tyndall effect and the “red hues of sunrise and sunset”.

Answer:

v = 2.85 m/s

Explanation:

Given that,

A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.

The distance between wave crests to be 16 m.

We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :

[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]

So, the speed of the wave is 2.85 m/s.

Answer:

condensation - thermal energy removed

freezing -thermal energy removed

deposition - thermal energy removed

sublimation - thermal energy added

evaporation - thermal energy added

melting - thermal energy added

Explanation:

Thermal energy is heat energy. Processes in which heat is added involve the addition of thermal energy while processes in which heat energy is removed involves removal of thermal energy.

Condensation involves a change from gas to liquid, freezing involves a change from liquid to solid while deposition involves the settling of mobile particles at a place. All these processes involve a decrease in energy of particles.

On the other hand, sublimation is a direct change from solid to gas, melting involves a change from solid to liquid while evaporation involves a change from liquid to gas. All these processes occur when energy is added to the particles in a system.

Answer:

condensation - thermal energy removed

freezing -thermal energy removed

deposition - thermal energy removed

sublimation - thermal energy added

evaporation - thermal energy added

melting - thermal energy added

Answer:

The momentum makes it worse.

Explanation:

The momentum of vehicles running at faster speeds is very high and causes a lot of damage to the vehicles.

Answer:

a)  [tex]h=25m[/tex]

b)  [tex]v=19.8m/sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=25m[/tex]

Bounce Height [tex]h'=20m[/tex]

Generally the Kinematic equation is mathematically given by

[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]

[tex]V=22.1m/sec[/tex]

Therefore Height

[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]

[tex]h=25m[/tex]

b)

Generally the Kinematic equation is mathematically given by

[tex]v^2=2ah[/tex]

[tex]v^2=2*9.8*20[/tex]

[tex]v=\sqrt{2*9.8*20}[/tex]

[tex]v=19.8m/sec[/tex]

Answer:

Unconscious wish fulfillment

Explanation:

Unconscious wish fulfillment

(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)

Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer

Answer:

3.125J

Explanation:

K.E.= 1/2(mass)(velocity)^2

K.E.=1/2(0.25)(5)^2=3.125

Answer:

an example of when friction is a hindrance, is if someone with shorts is sliding down a slide. their skin rubbing on the slide will cause friction and will slow them down. another example is if you're dragging a large wooden box across the floor. the wood and the floor interacting cause friction and will make it more difficult to push the box.

Explanation:

hope this helps :D

Answer:

force=mass×acceleration

hence

acceleration is given by force÷mass

(500÷200)*5=12.5

Answer:

  an object sliding down hill

Explanation:

On a slope, the force applied is due to gravity. Its direction is straight down. If the object is sliding down the hill, its displacement is at an angle to the applied force. The angle of displacement will depend on the steepness of the hill.

Chlorine has the smallest atomic radius since the atomic radius decreases as you travel to the right and up

1:-

[tex]\\ \sf\longmapsto cos\Theta=\dfrac{B}{H}[/tex]

[tex]\\ \sf\longmapsto cos\Theta=\dfrac{4}{5}[/tex]

2:-

[tex]\\ \sf\longmapsto tan\Theta=\dfrac{P}{B}[/tex]

[tex]\\ \sf\longmapsto Tan\Theta=\dfrac{3}{4}[/tex]

Key Notes:-

Answer:

Cos A = 4/5

Tan A = 3/4

Explanation:

Cos A = Adjacent/Hypotenuse = 4/5

Tan A = Opposite/Adjacent = 3/4

Answer:

The theory of relativity usually encompasses two interrelated theories by Albert Einstein: special relativity and general relativity, proposed and published in 1905 and 1915, respectively. Special relativity applies to all physical phenomena in the absence of gravity. General relativity explains the law of gravitation and its relation to other forces of nature.It applies to the cosmological and astrophysical realm, including astronomy.

The theory transformed theoretical physics and astronomy during the 20th century, superseding a 200-year-old theory of mechanics created primarily by Isaac Newton. It introduced concepts including spacetime as a unified entity of space and time, relativity of simultaneity, kinematic and gravitational time dilation, and length contraction. In the field of physics, relativity improved the science of elementary particles and their fundamental interactions, along with ushering in the nuclear age. With relativity, cosmology and astrophysics predicted extraordinary astronomical phenomena such as neutron stars, black holes, and gravitational waves

Answer:

well done buddy

Explanation:

Answer:

I. Period = 1.3 seconds

II. Frequency = 0.769 Hertz

Explanation:

Given the following data;

Number of oscillation = 240 cycles

Time = 5.2 minutes.

Conversion:

1 minute = 60 seconds

5.2 minutes = X seconds

X = 60 * 5.2

X = 312 seconds

To find the following;

I. Period

Mathematically, the number of oscillation of a pendulum is given by the formula;

[tex] Number \; of \; oscillation = \frac {Time}{Period} [/tex]

Making period the subject of formula, we have;

[tex] Period = \frac {Time}{Number \; of \; oscillation} [/tex]

Substituting into the formula, we have;

[tex] Period = \frac {312}{240} [/tex]

Period = 1.3 seconds

II. Frequency

[tex] Frequency = \frac {1}{Period} [/tex]

Substituting the values into the formula, we have;

[tex] Frequency = \frac {1}{1.3} [/tex]

Frequency = 0.769 Hertz

Answer:

option c. 21.0

Explanation:

It was given that to find 3 significant figures. So the answer is 21.0

The answer is definitely Potassium

Answer:

2.5 m/s²

Explanation:

The given parameters are;

The mass of the car, m = 2,000 kg

The radius of the car, r = 40.0 m

The coefficient of friction between the car tires and the road, μ = 0.500

The constant speed with which the car moves, v = 10.0 m/s

The normal reaction of the road on the car, N = The weight of the car;

∴ N = m × g

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

N ≈ 2,000 kg × 9.81 m/s² = 19,620 N

The frictional force, [tex]F_f[/tex] = μ × N

The centripetal force, [tex]F_c[/tex] = m·v²/r

The car moves without slipping when [tex]F_f[/tex] = [tex]F_c[/tex]

Therefore, [tex]F_f[/tex] = 0.500 × 19,620 N = 2,000 kg × [tex]v_{max}[/tex]²/40.0 m

∴ [tex]v_{max}[/tex] = √(0.500 × 19,620 N × 40.0 m/2,000 kg) ≈ 14.007 m/s

Therefore, the velocity with which the car moves, v < [tex]v_{max}[/tex]

The cars centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ [tex]a_c[/tex] = (10.0 m/s)²/40.0 m = 2.5 m/s²

The cars centripetal acceleration as it goes round the turn, [tex]a_c[/tex] = 2.5 m/s².