What are half reaction
Answer:
When you don't have a complete reaction.
Explanation:
Happens a lot between a solvent and a solute. The solute may not bind well with the solvent I.e. water.
A gas has a volume of 25.0 mL at 2.50 atm. What is the volume at 457 mmHg if the temperature remains constant?
Answer:
≈ 0.104 liters
Explanation:
We can use Boyle's Law: [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]
P₁ = 2.50 atm
V₁ = 25.0 mL
P₂ = 457 mmHg
V₂ = ?
Because pressure should be in atm we will convert 457 mmHg to units in atm:
1 atm = 760mmHg so we can divide 457 by 760 and we get ≈ 0.601atm
Next we can plug in the units to the equation for Boyle's Law:
(2.50)(25.0) = (0.601)(V₂)
Solve for V₂
V₂ will give you ≈ 104mL or 0.104L
Either is correct depending on which unit they are asking you to use
What is the formula of the ion hydrogen sulfite, which has a charge of -1
There are two types of ions in chemistry, one is cation and the other is anion. Anion is the negative charge ion. Therefore, the formula of hydrogen sulfite ion is HSO₃⁻
What is chemical Compound?Chemical Compound is a combination of ions, ions forms by combination of element and element forms by combination of atoms in fixed proportion.
According to our question the chemical compound from which hydrogen sulfite ion is coming is sulfurous acid that is H₂SO₃. So to get hydrogen sulfite ion we need to remove one hydrogen ion that is H⁺ from the chemical compound sulfurous acid.
The balanced reaction is
H₂SO₃[tex]\rightarrow[/tex]H⁺ + HSO₃⁻
From above reaction we can see that the charge over hydrogen sulfite ion is -1
Therefore the formula of hydrogen sulfite is HSO3-
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ6
Difference between atomic number and atomic weight any 2 points
Answer:
According to the definitions given, atomic mass which is also called atomic weight is the measured total mass of an element's atom. Whereas, atomic number is nothing but the total number of neutrons and protons in the nucleus of an atom....
can u talk to in comment section
Use the following steps to balance the redox reaction using half-reactions. Zn(s) + Fe3+ Zn2+ + Fe(s) (unbalanced) a. Write balanced oxidation and reduction half-reactions. Indicate which is the oxidation reaction and which is the reduction reaction. (6 points) b. Balance the charge in the two half-reactions by multiplying the half-reactions by the correct multiplication factors. (4 points) c. Add the equations and simplify to get the balanced equation.
Answer:
Explanation:
a )
Zn = Zn²⁺ + 2e ( oxidation reaction )
Fe³⁺ + 3e = Fe( s ) ( reduction reaction )
b )
[ Zn = Zn²⁺ + 2e ] x 3
[ Fe³⁺ + 3e = Fe( s ) ] x 2
-------------------------------------------------------------------
3 Zn + 2 Fe³⁺ + 6e = 3 Zn²⁺ + 2 Fe ( s ) + 6e
3 Zn + 2 Fe³⁺ = 3 Zn²⁺ + 2 Fe ( s )
Si se usa 450 gramos de carbonato de calcio para dicho proceso ¿Qué volumen de CO2 se obtendrá, si la presión es de 8 atm y la temperatura 200°C? R=0,082 atm.L/mol.K
Respuesta:
21.8 L
Explicación:
Paso 1: Escribir la reacción balanceada
CaCO₃ ⇒ CaO + CO₂
Paso 2: Convertir 450 g de CaCO₃ a moles
La masa molar de CaCO₃ es 100.09 g.
450 g × (1 mol/100.09 g) = 4.50 mol
Paso 3: Calcular los moles de CO₂ que se forman a partir de 4.50 moles de CaCO₃
La relación molar de CaCO₃ a CO₂ es 1:1. Los moles de CO₂ formados son 1/1 × 4.50 mol = 4.50 mol.
Paso 4: Convertir la temperatura a Kelvin
Usaremos la siguiente expresión.
K = °C + 273.15 = 200°C + 273.15 = 473 K
Paso 5: Calcular el volumen de CO₂
Usaremos la ecuación del gas ideal.
P × V = n × R × T
V = n × R × T / P
V = 4.50 mol × (0.082 atm.L/mol.K) × 473 K / 8 atm
V = 21.8 L
What is 16.30 to the 100th gram
Answer:
1.65485688 × 10121 grams
Explanation:
Aside from those discrete items, anything like rice or flour can be measured out to make up 100 grams. For example, 1/2 cup (125 ml or about 4 and 1/2 fl. oz) of dry rice weighs very close to 100 grams.
Which element increases its oxidation number in this reaction? 3KOH + H3PO4 → K3PO4 + 3H2O
Answer:
The answer is "no changes in oxidation number "
Explanation:
Given equation:
[tex]3KOH + H_3PO_4 \longrightarrow K_3PO_4 + 3H_2O[/tex]
In the above-given equation, there are no changes in the oxidation number which can be defined as follows but first we defined the oxidation: In the chemical process, it requires the transfer of ions is oxidation. In particular, it means that products that supply electrodes are oxidized. In the given equation, when 3Potassium hydroxide reacts with phosphoric acid it will produce potassium phosphate and 3 moles of water.
11. Samantha was asked to measure out 10 g of salt in a lab. She mistakenly measures out 15 g instead. Calculate
the percent error. Make sure your answer has the correct number of significant figures!
Answer:
50%
Explanation:
Expected measurement required = 10g
Actual measurement observed = 15g
The percentage error is given as proportion the difference between the actual and expected measurement or values and the expected value value expressed as a percentage.
[(Actual - Expected) / Expected] × 100%
[(15 - 10) / 10)] × 100%
(5 / 10) × 100%
0.5 × 100%
50%
Therefore, the percentage error in the measurement is 50%
clearly distinguish between science and technology
Answer:
The words science and technology can and often are used interchangeably. But the goal of science is the pursuit of knowledge for its own sake while the goal of technology is to create products that solve problems and improve human life. Simply put, technology is the practical application of science.
Explanation:
Check the following images
Hope it helps!!!
Please mark it as Brainliest ( the crown icon)
formula for soda glass
Answer:
composition of soda-lime glass is 73% SiO2 – 15% Na2O − 7% CaO − 4% MgO − 1% Al2O3 [129,132,133].
The Soda glass formula is SiO2, Na2O, CaO, Al2O3, K2O, SO3, MgO, Fe2O3, TiO2
Soda glass is a chemical compound that stands out for being the most widely used material to make windows, bottles, glasses, among others.
This compound is characterized by being chemically stable, reasonably hard, and extremely versatile because it can be recycled since it can be melted to make new products.
Its chemical formula is made up of other compounds such as:
SiO2, is Silicon OxideNa2O, is sodium oxideCaO, is calcium oxideAl2O3, is aluminum oxideK2O, is potassium oxideSO3, is sulfur oxideMgO, is magnesium oxideFe2O3, is iron oxideTiO2, is Titanium OxideAdditionally, the compounds found in the highest proportion in glass are SiO2 (74 atoms) and Na2O (13 atoms).
Learn more in: https://brainly.com/question/1247523
begging u to answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds
Answer:
a-Interatomic bonds
Explanation:
First of all, it is not a force. Let alone be molecular force.
Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple ball in the center surrounded by overlapping concentric black ovals, each with a small green ball on each of the 6 ovals. What experimental evidence led to the development of this atomic model from the one before it? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them.
Answer:
A few of the positive particles aimed at a gold foil seemed to bounce back.
Explanation:
Rutherford's experiment took the search for the structure of the atom a step further. In this experiment, a narrow beam of alpha particles emitted from a source was used to bombard a thin gold foil.
The scattering of the alpha particles was detected by a movable ZnS screen. It was found that most of the alpha particles followed a straight path through the gold foil but some were scattered through large angles and some even scattered backwards.
Following this experiment, Rutherford decided on his planetary model of the atom in which the nucleus is at the core of the atom with electrons moving round the nucleus in orbits. Rutherford was awarded a Nobel prize for this work.
Answer:
a
Explanation:
edge 2020
A student made the Lewis dot diagram of a compound as shown. Mg is written with two dots shown on its top. Cl is written on the right side of Mg. Cl has seven dots around it. An arrow is shown from one dot on Mg toward the vacant space around Cl. Another arrow is shown from the other dot on Mg toward the vacant space around Cl. On the top, the art title is written as Students Lewis Dot Model. What is the error in the Lewis dot diagram?
Answer:
The dots were not properly located and arrows are not used in Lewis structures
Explanation:
If we intend to write a Lewis structure for a compound, that lewis structure must consist of only dots. These dots actually show the valence electrons on the outermost shell of the molecule.
We do not involve arrows when writing dot electron structures for compounds. The valence electrons of magnesium ought not to be written together because they are not a lone pair, rather they are two unpaired electrons. The use of an arrow suggests a coordinate covalent bond which is not the case here.
The correct lewis structure for MgCl2 is shown in the image attached to this answer.
Answer: B is the answer took the test
Explanation: both electrons of Mg should be transferred to one O atom...
Determinación de pH Expresa las siguientes concentraciones de [H+ ] en función del pH • [H+] = 0.001 M • [H+] = 0.002 M • [H+] = 2.45X10-4 M • [H+] = 5.2X10-9 M • [H+] = 0.04 M
Answer:
• pH = 3.0
• pH = 2.70
• pH = 3.61
• pH = 8.28
• pH = 1.40
Explanation:
El pH es una medida en química usada para determinar el grado de acidez o basicidad en una solución.
Se define como:
pH = -log₁₀ [H⁺]
El - logaritmo de la concentración molar de H⁺
Para las concentraciones de H⁺ dadas:
• [H+] = 0.001 M
pH = -log (0.001M) = 3
pH = 3.0
• [H+] = 0.002 M
pH = -log (0.002M)
pH = 2.70
• [H+] = 2.45X10-4 M
pH = -log (2.45X10-4 M )
pH = 3.61
• [H+] = 5.2X10-9 M
pH = -log (5.2X10-9 M)
pH = 8.28
• [H+] = 0.04 M
pH = -log (0.04M)
pH = 1.40
Polymers formed from amino acids are called _____. proteins carbohydrates lipids nucleic acids
Answer:
Proteins
Explanation:
Amino acids act as monomers (a single unit used to form polymers) , the polymer will be a long chain of individual amino acids. An amino acid chain forms a protein. These proteins are also known as peptides.
Hope this helps and please mark as the brainliest.
When two ionic compounds are dissolved in water, a double replacement reaction can... Group of answer choices occur if two of the ions form an insoluble ionic compound, which precipitates out of solution occur if the ions react to form a gas, which bubbles out of the solution never occur since all ions are in water occur if the ions react to form a gas, which bubbles out of the solution ionic compounds only react with nonmetals
Answer:
occur if two of the ions form an insoluble ionic compound, which precipitates out of solution
Explanation:
When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.
1.) Given 30 grams of CO2, how many moles of CO2 would you have? How many individual molecules of CO2 is that?
2., Given 22 Grams of NaCl, How many moles of Nacl would you have? How many individual molecules of NaCl is that?
3.) Given 50 grams of ammonia NH3, How many moles of NH3 would you have? How many Molecules of NH3 is that?
Answer:
1a) .68 moles 1b)4.1E-23 molecules.
2a) .37 moles 2b) 2.27E-23 molecules
Explanation:
1a) CO2 is equal to 44 grams (C→12 grams,O→16 grams[·2]) .30g/44g is .68 moles.
1b) multiply 1A by advogadros number (6.022E-23)
2a) NaCl is 58 grams. 22/58 is .37 moles.
2b) multiply 2A by advogadros number.
you'd answer #3 the same way #1 and #2
The branch of science that deals with chemicals and bonds are called chemistry. The moles are units to calculate the quantity required to use the element.
The correct answer is mentioned below.
What are moles?The mole is the base unit of the amount of substance in the International System of Units (SI). It is defined as exactly 6.02214076×10^23 elementary entities which may be atoms, molecules, ions, or electrons.According to the question, the moles to the option is as follows:-
moles of 30 grams of CO2 is[tex]n =\frac{M}{M.M}\\ \\\frac{30}{44} \\\\=0.681\\\\[/tex]
The number of molecules is [tex]0.68 *6022*10^{23} =4.09496*10^{23[/tex].
2. moles of 22 grams of NaCl is
[tex]\frac{22}{44}\\ \\=0.5\\\\[/tex]
Molecules will be [tex]0.5*6.022*10^{23} = 3.011*10^{23}[/tex]
3. moles of 50-gram ammonia
[tex]\frac{50}{17} \\\\2.94\\[/tex]
The number of molecules is [tex]2.94*6.022*10^{23} = 1770*10^{23[/tex]
For more information about the moles, refer to the link:-
https://brainly.com/question/15209553
What element is depicted by the following electron configuration:
you can determine this by
adding the numbers of the sub-shells, 2+2+6+2+4=16the number on the last sub-shell, 4 means on the 4th main groupthe 3 before 3p4, tells us on the 3rd period, so the answer is Sulphur.What is an empirical formula?
Answer:
a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.
Hope this helped!!!
Answer:
Empirical formulas show the simplest whole-number ratio of atoms in a compound
Explanation:
Given that the density of air is 14.4, then the vapour of sulphur IV oxide is A. 16 B. 32 C. 64 D. 128
Thank you.
Answer:
32
Explanation:
The vapour density of a gas is the number of times a given volume of gas or vapour is as heavy as the same volume of hydrogen at a particular temperature and pressure.
Vapour density = 2 × relative molecular mass of the gas or vapour
Relative molecular mass of SO2 = 32 + 2(16) = 64
Hence;
Vapour density of SO2 = 64/2
Vapour density of SO2 = 32
The pOH of a solution is 3.1. Which of the following is true about the solution? (1 point)
It is acidic and has a pH of 10.9.
It is basic and has a pH of 10.9.
It is acidic and has a pH of 6.2.
It is basic and has a pH of 6.2.
Answer:
The answer is option BExplanation:
To solve the question above we must first find the pH of the solution using the formula
pH + pOH = 14
pOH = 3.1
So we have
pH + 3.1 = 14
pH = 14 - 3.1
pH = 10.9
Since it's pH is 10.9 the solution is a basic solution since it's pH lies in the basic region.
Hope this helps you
Ethane- (-89) Butane- (0) Methanol- (64.7) Hexane- (69) Pentadecane- (270) Heptadecane- (302) a) A mixture of pendtadecane and heptadecane can be separated by______ b) Which pair of compounds are easiest to separate (i) Ethane and Pentadecane (ii) Ethane and Heptadecane (iii) Butane and Hexane (iv) Butane and Heptadecane
Answer:
(ii) Ethane and Heptadecane
Explanation:
The separation of all the species listed in the answer options for the question depends on the molar mass of each specie.
Ethane is a low molecular mass gas. It exists in the gaseous state at room temperature. However, heptadecane appears as a liquid because it has a greater relative molecular mass.
It is very easily to distinguish between the gas, ethane and the liquid heptadecane which is a high molecular mass alkane, hence the answer.
What is the independent variable of Smithers experience?
Please help controls and variables simpson? Smithers thinks that a special juice will increase the productivity of workers. He creates two groups of 50 workers each and assigns each group the same task (in this case, they're supposed to staple a set of papers). Group A is given the special juice to drink while they work. Group B is not given the special...
Answer:
Smithers thinks that a special juice will increase the productivity of workers. He creates two groups of 50 workers each and assigns each group the same task (in this case, they're ... Group A is given the special juice to drink while they work. Group ... 1. Control Group. Group B. 2. Independent Variable. volume of special juice.
Explanation:
Answer:
1. Group B
2. The juice
3. The number of stacks of paper
4. the juice did not help improve a quicker process
5. Group A can be given the juice, Group B can be given the juice without the special ingredient
USE QUIZLET FLASH CARDS IT CAN HELP YOU WITH A LOT OF QUESTION
Answer it answer it answer it
Answer:
[tex]\Large \boxed{\mathrm{A}}[/tex]
Explanation:
Rust formed from iron and oxygen combining is a chemical change, because in a chemical change, the resulting substance(s) will have different properties from the substance(s) before the chemical change.
I cant comment... So is it Right?
If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL
Hey there!:
Mass = 0.6 g
Density = 0.0012 g/mL
Volume = ??
Therefore :
Density = mass / Volume
0.0012 = 0.6 / V
V = 0.6 / 0.012
V = 500 mL
Hope this helps!
Which of the following is NOT a product of the electrolysis of NaCl? A. Chlorine gas B. None of these C. Hydrogen gas D. Oxygen gas
Answer:D. Oxygen gas
Explanation: because the experiment showed
0.10 moles of sodium sulfate is dissolved into 12 mL of solution. What is the molar concentration of the solution?
Your answer should have two significant figures (round your answer to one decimal place).
the molar concentration should be atleast 5mL off the solution since its disolved
Answer:
8.3
Explanation:
Convert mL to L.
12 mL×1 L1000 mL=0.012 L
Solve for molarity.
Molarity=moles of solute
liters of solution=0.10 mol0.012 L=8.3 M
Does Na2 gas posses metallic character? Explain your answer..
Explanation:
It contains Na2 molecules and the atoms in this molecule are held together by a purely covalent bond because the electronegativity of the two atoms is identical.Metallic bonding would not kick in until you make clusters of quite a few atoms. Such clusters would likely not be very stable because thermodynamically the larger the clump of material the more stable it gets. So they tend to coalesce until you have chunk of metal.Metallic bonding is in a sense a form of covalent bonding, but it is very collective (delocalized over a great many atoms) and electron deficient (there are more states than electrons to fill them up with, leading to conductive properties. This means that “a metallic bond” is a bit of an oxymoron like a forest with only one tree.Reply me in commentsYes, Na2 gas possesses a metallic character.
Does NA contain metallic bonds?In the stable state, metal sodium functions as an array of Na+ ions which can be surrounded by way of a sea of 3s electrons. However, it would be wrong to consider metal sodium as an ion when you consider that the ocean of electrons is shared by using all of the sodium cations, quenching the nice fee.
Sodium most effective has one valence electron. So, in metallic bonding, it is able to only donate one electron to be delocalized at some point of the structure. In steel bonding, the real bonding is the electrostatic force between the effective cations and the delocalized electrons.
Learn more about metallic bonds here: https://brainly.com/question/20536777
#SPJ2
How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. ResetHelp Olive oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank. monounsaturated fats, while canola oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank.. Olive oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank. polyunsaturated fats, while canola oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank..
This question is incomplete, here´s the complete question.
How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right.
Olive oil has about ____ monounsaturated fats, while canola oil has about ___.
Olive oil has about ___ polyunsaturated fats, while canola oil has about ___.
6%
10%
30%
84%
5%
65%
Answer:
Olive oil has about 84% monounsaturated fats, while canola oil has about 65%.
Olive oil has about 5% polyunsaturated fats, while canola oil has about 30%.
Explanation:
Olive and canola oil are the major sources of monounsaturated fatty acids. Although vegetable oils usually have high concentrations of polyunsaturated fatty acids and less monounsaturated fats, olive and canola oils have comparatively less polyunsaturated fatty acids, and more monounsaturated fatty acids.
