1. Why fractional distillation has
fractionating column but not in simple
distillation?

Answer: o.125 moles of gas X with a molar mass of 240

Explanation:

2.8 dm3 of gas X at STP has equal mass with 11.2 dm3 of C2H6 at STP. What is the number of mole if gas X has 30 grams?

the molar volume of any gas at STP is the volume of 1 mole at STP

and is 22.4 L

the C2H6 has a volume of 11.2L at STP so it has 0.5 moles

C2H6 has a molar mass of (2 X 12) +(6 X 1) = 24 + 6 = 30

0,5 moles weighs 15 gm at STP with

so 15 gm at STP with 2.8 L for gas X

PV=nRT

P=1 atm

T =273.2k

V =2.8

R =0.082

n = PV/RT = (1 X 2.8)/(0.082 X 273.2) =0.125 moles of gasX

the weight of gas X is 30 gms

so 30/.125 =240 g/mole = molar mass of gas X

Answer:

carbohydrates

Explanation:

or carbon dioxide

Answer:

the average mass of the atoms of an element measured in atomic mass unit (amu, also known as daltons, D)

Explanation:

Por definición de enlace iónico, covalente y regla del octeto, la relación existente entre la teoría del octeto de Lewis con los enlaces iónicos y  covalentes es que dichos enlaces se producen con el objetivo de completar la última capa de electrones y adquirir estabilidad.

Por un lado, se produce un enlace iónico entre átomos metálicos y no metálicos, donde los electrones se transfieren completamente de un átomo a otro. Durante este proceso, un átomo pierde electrones y otro los gana, formando iones. Por lo general, el metal cede sus electrones formando un catión al elemento no metálico, que forma un anión.

Por otro lado, el enlace covalente es el enlace químico entre átomos donde los electrones se comparten, formando una molécula. Se establecen enlaces covalentes entre elementos no metálicos. El par de electrones compartidos es común a los dos átomos y los mantiene unidos.

En ambos casos se cumple con la regla del octeto, que establece que los átomos de los elementos se enlazan unos a otros en el intento de completar su capa de valencia con ocho electrones. Es decir que los átomos van a tender a ceder o compartir electrones para completar ocho electrones en la capa de valencia mediante un enlace iónico, covalente o metálico.

En otras palabras, el objetivo es tener la configuración electrónica del gas noble más cercano, teniendo así la última capa de electrones completa y adquiriendo estabilidad.

En resumen, la relación existente entre la teoría del octeto de Lewis con los enlaces iónicos y  covalentes es que dichos enlaces se producen con el objetivo de completar la última capa de electrones y adquirir estabilidad.

Aprende más:

Answer:

Humans have 23 pairs of chromosomes.

A trisomy is a chromosomal condition characterised by an additional chromosome.

A person with a trisomy has 47 chromosomes instead of 46.

Down syndrome, Edward syndrome and Patau syndrome are the most common forms of trisomy.

Explanation:

Answer:

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

From the question we have

[tex]P_2 = \frac{125\times3.50 }{2.75} = \frac{437.5}{2.75} \\ = 159.090909...[/tex]

We have the final answer as

Hope this helps you

Answer: 0.023 moles of CaO.

Explanation:

The balanced equation tells us that we'll get 2 moles of CaO for every one mole of O2.  Since we have 0.046 moles of O2, we'll get 0.023 moles of CaO.  (2 sig figs)

8%

Explanation:

In a DNA molecule the no. of Adenine bases equal to that of Thymine bases

The no. of Cytosine bases equal to that of Guamine bases.

If we take no. of Thymine bases as x and no. of Cytosine bases as y,

Adenine + Thymine + Cytosine + Guamine = 100

x + x + y+y = 100

2( x+y) = 100

x+y = 50

y=42

therefore x= 50-42 = 8%

The orientation of the poles of the magnet on the cars and the large

magnet are like poles.

The correct responses are;

First question

Second question:

Third question:

Fourth question:

Reasons:

Potential energy is the energy an object has due to its location.

Energy is a product of force and distance, and therefore, if the force,

experienced by the object increase, the potential energy of the object

increases.

The strength of a magnetic field, B, is given by the formula;

[tex]\displaystyle B = \frac{\mu_0 \cdot I}{2 \cdot \pi \cdot d}[/tex]

Where;

B = The magnetic field strength

I = Current

d = The distance from the source of the magnet

μ₀ = The permeability of free space = 4·π × 10⁻⁷ T m/A

Therefore, the strength of the magnet is higher closer to the source.

First question

In a magnet, like poles push each other back, and given that the poles of the magnet adjacent to each other are like poles, to get the largest increase in she should move the cars towards the large magnet.

Second question:

The reason why the movement will result in the largest increase in potential energy is because like polls repel each other and the strength of a magnetic field increases closer to the magnet

Third question:

The magnetic force that will act on the roller coaster car moved towards the large magnet, pushes the car in the opposite direction.

Fourth question:

The green cart should be moved from point D to point C to get the largest potential energy

Learn more here:

https://brainly.com/question/1975438

Answer:

Carbon dioxide

Explanation:

Metal oxides are basic and Non metal.oxides are acidic.

Al, Be, Zn,Sn ,Pb oxides are amphoteric so they show both acidic and basic properties.

From the above answers Al, Cu and Mg are metals so their oxides are acidic while Carbon is a non metal.so CO2 is an acidic oxide

Answer:

Ionic compounds contain ions and are held together by the attractive forces among the oppositely charged ions

Explanation:

Common salt (sodium chloride) is one of the best-known ionic compounds. Molecular compounds contain discrete molecules, which are held together by sharing electrons (covalent bonding).

The chemicals found at the crime scene although not mentioned must be Sodium zincate.

Discussion:

An interesting demonstration to show plating and alloys is the conversion of copper coins to silver look-alike coins.

A 'copper' coin when dipped into a solution of sodium zincate in contact with zinc. The coin is plated with zinc and appears silver in colour.

This is a common chemistry classroom trick.

Read more on plating:

https://brainly.com/question/20078989

Answer:

The high melting point is also consistent with its description as an ionic solid. In the crystal, each S2− ion is surrounded by an octahedron of six Ca2+ ions, and complementarity, each Ca2+ ion surrounded by six S2− ions.

Explanation:

You can use the periodic table to predict whether an atom will form an anion or a cation, and you can often predict the charge of the resulting ion. Atoms of many main-group metals lose enough electrons to leave them with the same number of electrons as an atom of the preceding noble gas. To illustrate, an atom of an alkali metal (group 1) loses one electron and forms a cation with a 1+ charge; an alkaline earth metal (group 2) loses two electrons and forms a cation with a 2+ charge, and so on. For example, a neutral calcium atom, with 20 protons and 20 electrons, readily loses two electrons. This results in a cation with 20 protons, 18 electrons, and a 2+ charge. It has the same number of electrons as atoms of the preceding noble gas, argon, and is symbolized Ca2+. The name of a metal ion is the same as the name of the metal atom from which it forms, so Ca2+ is called a calcium ion.

When atoms of nonmetal elements form ions, they generally gain enough electrons to give them the same number of electrons as an atom of the next noble gas in the periodic table. Atoms of group 17 gain one electron and form anions with a 1− charge; atoms of group 16 gain two electrons and form ions with a 2− charge, and so on. For example, the neutral bromine atom, with 35 protons and 35 electrons, can gain one electron to provide it with 36 electrons. This results in an anion with 35 protons, 36 electrons, and a 1− charge. It has the same number of electrons as atoms of the next noble gas, krypton, and is symbolized Br−. (A discussion of the theory supporting the favored status of noble gas electron numbers reflected in these predictive rules for ion formation is provided in a later chapter of this text.)

Answer: The answers aplicable would be

1) The greater magnitude of force, the faster the acceleration.

2) Acceleration is caused by unbalanced forces.

An exothermic process is one that gives off heat.

Explanation:

This heat is transferred to the surroundings. An endothermic process is one in which heat has to be supplied to the system from the surroundings.

Answer:

c

Explanation:

just got this question

The general structure of a carboxylic acid is shown by option D.

In organic chemistry, a carboxylic acid is an organic acid that consists of a carboxyl group connected to an R-group. the overall components of carboxylic acid are R−COOH or R−CO₂H, with R referring to the alkyl, alkenyl, aryl, or other institution. Carboxylic acids arise broadly.

A carboxylic acid is a natural compound that incorporates a carboxyl group (C(=O)OH). the general formulation of a carboxylic acid is R–COOH, with R referring to the relaxation of the molecule. A carboxylic acid may be the concept of a mixture between functional corporations: an alcohol institution, related to hydrogen certain to oxygen, which attaches to a carbonyl institution, involving a carbon double sure to oxygen.

Learn more about carboxylic acid here:-https://brainly.com/question/26855500

#SPJ1

This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.

Let the following solutions to come up:

[H⁺] = 2.63x10⁻³ M

[H⁺] = 1.00x10⁻⁷ M

[H⁺] = 4.511x10⁻⁹ M

The first step, will be the calculation of the pH for each solution via:

pH = -log([H⁺])

So that they turn out to be:

pH = -log(2.63x10⁻³ M) = 2.580

pH = -log(1.00x10⁻⁷ M) = 7.000

pH = -log(4.511x10⁻⁹ M) = 8.3457

In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.

Thus, you can reproduce this methodology with the proton concentrations you are given.

Learn more:

The momentum of the bowling ball will be greater than the rest balls.

The correct answer to the question is Option C. The 5 kg bowling ball

Momentum is defined as the product of mass and velocity i.e

Momentum = mass × velocity

If we keep the velocity of the object constant, the momentum will depend on the mass of the object.

Thus, the higher the mass, the greater the momentum and the lesser the mass, the smaller the momentum.

From the question given above,

Mass of tennis = 0.5 Kg

Mass of basketball = 2 Kg

Mass of bowling ball = 5 kg

We can see that the bowling ball has a higher mass.

Therefore, the momentum of the bowling ball will be greater than the rest balls.

The correct answer to the question is Option C. The 5 kg bowling ball

Learn more: https://brainly.com/question/8695101

Answer:

The ans is : A. Electron, proton, hydrogen atom, helium atom.

An atom consist of sub atomic particles. The order of particles from least massive to most massive is electron, proton, hydrogen atom, helium atom. The correct option is A.

The particles which are smaller in size than the atom are known as the sub atomic particles. An atom generally contains three sub atomic particles, they are protons, electrons and neutrons. The electrons revolve around the nucleus whereas the protons and neutrons are present at the center of the nucleus.

The protons are positively charged particles whereas the electrons are negatively charged. The neutrons are chargeless. The atomic number of 'H' atom is 1 and that of 'He' atom is 2.

The mass of e⁻ is 9.1 × 10⁻³¹ kg, proton is 1.67 × 10⁻²⁷ kg, 'H' atom is 1.66 × 10⁻²⁴ g, 'He' is 4 g. Thus the order is:

electron, proton, hydrogen atom, helium atom

Thus the correct option is A.

To know more about atom, visit;

https://brainly.com/question/14214017

#SPJ6

Answer:

Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.

Explanation:

Answer:

(C) Both of these

Explanation:

A beam of electrons has both of these Wave properties and Particle properties.

Un elemento químico, o un elemento, se define como un material que no puede descomponerse ni transformarse en otra sustancia por medios químicos. Cada elemento se identifica según la cantidad de protones que tiene en su núcleo atómico. Se puede crear un nuevo elemento agregando más protones a un átomo.

_________

Espero eso ayude ⚜

ITZY :)

Answer:

Unlike isopropanol, hydrogen peroxide is not a type of alcohol. You might recognize its chemical formula, H2O2, as being similar to that of water (H2O). The difference is that hydrogen peroxide has two oxygen atoms instead of one. That one extra oxygen atom makes it a strong oxidizer.

Answer:

a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Explanation:

Answer:

Explanation:

According to the concept of solubility, boiling water and then adding sugar to it will take longer time to dissolve than adding water and sugar together to boil as thermal energy requires to dissolve sugar will be less.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.

Learn more about solubility,here:

https://brainly.com/question/29589228

#SPJ5