Answer:
The answer is $ 218
Explanation:
Solution
Given that:
Description Amount
Direct materials $91
Direct labor $85
Variable manufacturing overhead $7
Fixed manufacturing overhead
( $ 161,000/ 4,600 units) $35
The unit product under absorption costing = $218
Therefore, the absorption costing unit product cost is $218
Samco signed a 5-year note payable on January 1, 2018, of $ 475 comma 000. The note requires annual principal payments each December 31 of $ 95 comma 000 plus interest at 9%. The entry to record the annual payment on December 31, 2021, includes A. a debit to Interest Expense for $ 17 comma 100. B. a debit to Interest Expense for $ 42 comma 750. C. a credit to Cash of $ 137 comma 750. D. a credit to Notes Payable for $ 95 comma 000.
Answer:
Option A, a debit to Interest Expense for $ 17 comma 100 is correct
Explanation:
The principal amount on 1st January 2021 needs to be established since that would be the amount left after 2018,2019,2020 principals have been repaid
Principal at 1st January 2021=$475,000-($95,000*3)=$190000
Interest on principal in 2021=$190000 *9%=$17100
Total repayment in 2021=principal plus interest=$95,000+$17,100=$ 112,100.00
The $95,000 would be a debit to notes payable not credit hence option is wrong.
Only option A,a debit of $17,100 to interest expense is correct
The following information was drawn from the balance sheets of the Kansas and Montana companies: Kansas Montana Current assets $ 59,000 $ 78,000 Current liabilities 40,000 43,000 Required a. Compute the current ratio for each company. b. Which company has the greater likelihood of being able to pay its bills? c. Assume that both companies have the same amount of total assets. Speculate as to which company would produce the higher return-on-assets ratio.
Answer:
a) Current ratio for Kansas company is 1.475
Current ratio for Montana company is 1.814
b) Since the current ratio for the Montana company is more than that of the Kansas company which shows better liquidity, the Montana company has the greater likelihood of being able to pay its bills.
c) Kansas company would produce the higher return-on-assets ratio.
Explanation:
Current Assets Current liabilities
Kansas Company $ 59,000 $ 40,000
Montana Company $ 78,000 $ 43,000
a) To calculate the current ratio of A company
Current ratio = [tex]\frac{Current Assets}{Current Liabilities}[/tex]
Therefore current ratio for Kansas company = $ 59,000 ÷ $ 40,000 = 1.475
Current ratio for Montana company = $ 78,000 ÷ $ 43,000 = 1.814
Number of Days Past Due Toot Auto Supply distributes new and used automobile parts to local dealers throughout the Midwest. Toot’s credit terms are n/30. As of the end of business on October 31, the following accounts receivable were past due: Account Due Date Amount Avalanche Auto August 15 $12,000 Bales Auto October 4 2,400 Derby Auto Repair June 26 3,900 Lucky's Auto Repair September 10 6,600 Pit Stop Auto September 24 1,100 Reliable Auto Repair July 2 9,750 Trident Auto August 25 1,800 Valley Repair & Tow May 23 4,000 Determine the number of days each account is past due as of October 31. Account Due Date Number of Days Past Due Avalanche Auto August 15 Bales Auto October 4 Derby Auto Repair June 26 Lucky's Auto Repair September 10 Pit Stop Auto September 24 Reliable Auto Repair July 2 Trident Auto August 25 Valley Repair & Tow May 23
Answer:
Check the explanation
Explanation:
Account Due Date Number of Days Past Due
Avalanche Auto August 15 (23+30+31)=84 days
Bales Auto October 4 20 days
Derby Auto Repair September 24 (7+31+31+30+31)=130 days
Lucky's Auto Repair September 24 (28+31)=59 days
Pit Stop Auto September 19 (11+31)=42 days
Reliable Auto Repair July 15 (16+31+30+31)=108 days
Trident Auto August 25 (7+30+31)=68 days
Valley Repair & Tow May 28 (14+30+31+31+30+31)=167 days
Your aunt is about to retire, and she wants to sell some of her stock and buy an annuity that will provide her with income of $53,000 per year for 30 years, beginning a year from today. The going rate on such annuities is 7.25%. How much would it cost her to buy such an annuity today
Answer:
Present Value= $641,494.12
Explanation:
Giving the following information:
Cash flow= $53,000 per year
Number of years= 30 years
Interest rate= 7.25%
First, we need to calculate the final value of the annuity:
FV= {A*[(1+i)^n-1]}/i
A= annual flow
FV= {53,000*[(1.0725^30)-1]} / 0.0725
FV= $5,237,351.32
Now, we can determine the present value:
PV= FV/(1+i)^n
PV= 5,237,351.32/ (1.0725^30)
PV= $641,494.12
On December 12, 2021, an investment in equity securities costing $77,000 was sold for $94,000. The total of the sale proceeds was credited to the investment in equity securities account. Required: 1. Prepare the journal entry to correct the error, assuming it is discovered before the books are adjusted or closed in 2021. (Ignore income taxes.) 2. Prepare the journal entry to correct the error assuming it is not discovered until early 2022. (Ignore income taxes.)
Answer:
1.
Dr. Investment Account $17,000
Cr. Gain on Sale $17,000
2.
Dr. retained Earning $17,000
Cr. Gain on Sale $17,000
Explanation:
1.
If an assets is sold more than the book value, then there is a gain on the sales of asset.
Gain on Sale = Sales Proceeds - Book value of Investment = $94,000 - $77,000 = $17,000
As sales proceeds of $94,000 are credited in the Investment account, which needs to be credited by $77,000 only. The excessive amount of $17,000 should be recorded in the Gain on sale account.
2.
Error is not discovered until 2022 and earning for 2021 was transferred to retained earning. So, adjustment should me made in the retained earnings to eliminate the effect.
Grab Manufacturing Co. purchased a 10-ton draw press at a cost of $183,000 with terms of 4/15, n/45. Payment was made within the discount period. Shipping costs were $4,300, which included $270 for insurance in transit. Installation costs totaled $12,900, which included $3,700 for taking out a section of a wall and rebuilding it because the press was too large for the doorway. The capitalized cost of the 10-ton draw press is: Multiple Choice $192,880. $190,880. $196,380. $197,880.
Answer:
$192,880
Explanation:
According to the scenario, computation of the given data are as follow:-
Cost of 10-ton draw press is $183,000 and if the cost paid before 15 days, there will be a 4% discount.
Discount Value is
= Cost of Draw Press × Discount Rate
= $183,000 × 4%
= $7,320
Total Capitalized Amount is
= (Total Cost of Draw Press - Discount Value) + Shipping Cost + Installation Cost
= ($183,000 - $7,320) + $4,300 + $12,900
= $175,680 + $4,300 + $12,900
= $192,880
According to the analysis, the capitalized cost of the 10-ton draw press is $192,880.
Because any cost which incurred for using an asset should be capitalized.
Consider the following estimates from the early 2010s of shares of income to each group. Country Poorest 40% Next 30% Richest 30% Bolivia 10 25 65 Chile 10 20 70 Uruguay 20 30 50 1.) Using the 4-point curved line drawing tool, plot the Lorenz curve for Bolivia. Properly label your curve. 2.) Using the 4-point curved line drawing tool, plot the Lorenz curve for Uruguay. Properly label your curve. Carefully follow the instructions above, and only draw the required objects. Which country has the most nearly equal income distribution? ▼ Chile Uruguay Bolivia .
Answer:
Check the explanation
Explanation:
Kindly check the attached images below to see the step by step explanation to the question above.
elb Company currently manufactures 50,000 units per year of a key component for its manufacturing process. Variable costs are $2.95 per unit, fixed costs related to making this component are $67,000 per year, and allocated fixed costs are $61,500 per year. The allocated fixed costs are unavoidable whether the company makes or buys this component. The company is considering buying this component from a supplier for $3.90 per unit. Calculate the total incremental cost of making 50,000 units and buying 50,000 units. Should it continue to manufacture the component, or should it buy this component from the outside supplier
Answer: Please refer to Explanation
Explanation:
Incremental Cost of Making Product
Variable costs are $2.95 per unit and 50,000 units are to be made. Total Variable Cost is therefore,
= 2.95 * 50,000
= $147,500
Fixed costs associated with the production are$ 67,000 so added tl the variable costs is,
= 147,500 + 67,000
= $214,500
$214,500 is the cost making the product.
Cost of Buying Product
Component can be bought for $3.90 per unit. 50,000 units to be bought gives,
= 50,000 * 3.9
= $195,000
Cost of buying is $195,000
Decision
Company should buy the component as it spends less in buying it than I making it.
Note - Allocated fixed costs were not included in calculation because they will be there regardless of the decision. Hence the term, incremental costs.
Answer:
elb Company
a) Incremental Cost of making 50,000 units:
Variable costs = $2.95 x 50,000 = $147,500
Avoidable fixed costs = $67,000
Total = $214,500
b) Incremental Cost of buying 50,000
Buy-in costs =- $3.90 x 50,000 = $195,000
c) The company should buy this component from the outside supplier.
Explanation:
In make or buy decisions, only variable and avoidable costs are taken into consideration. Unavoidable fixed costs are sunk costs which must be incurred irrespective of the choice made.
Therefore, the unavoidable allocated fixed costs of $61,500 should not be taken into consideration. Afterall, no matter the decision, it would still be incurred and allocated.
HI Corporation is considering the purchase of a machine that promises to reduce operating costs by the same amount for every year of its 5-year useful life. The machine will cost $211,980 and has no salvage value. The machine has a 14% internal rate of return. (Ignore income taxes.) Click here to view Exhibit 13B-1 and Exhibit 13B-2 to determine the appropriate discount factor(s) using the tables provided. Required: What are the annual cost savings promised by the machine? (Round your intermediate calculations and final answer to the nearest whole dollar amount.)
Answer:
Annual savings = 61,746.
Explanation:
The Net Present Value (NPV) is the difference between the present value (PV) of cash outflows and PV of cash inflow
At the internal rate of return the PC of annual cash savings will be equal to the investment cost
Initial cost = 211980
PV = annual cash savings = A× (1- (1+r)^(-n)/ r
A=? r-internal rate of return, 14%, n-number of years- 5
211980 = A (1- (1.14)^(-5)/ 0.14
211,980 = A× 3.433080969
A= 211,980/3.43308
A= 61746.28619
Annual savings = 61,746.
Now consider the case in which the manufacturer offers a marginal unit quantity discount for the plywood. The first 20,000 square feet of any order are sold at $1 per square foot, the next 20,000 square feet are sold at $0.98 per square foot, and any quantity larger than 40,000 square feet is sold for $0.96 per square foot. What is the optimal lot size for Prefab given this pricing structure? How much cycle inven
Answer:
Explanation:
We can use the following method to solve the given problem
We are given following
Annual demand,
D = 20000*12
D = 240,000 sqft
Fixed order cost, is given as
S = $ 400
Considering the unit cost, is given as
C = $ 1
Holding cost, H = 1*20% = $ 0.2
EOQ = sqrt(2DS/H)
= √(2*240000*400/0.2)
= 30,984 sq ft
This is higher than 20,000 and less than 40,000 sq ft. For this reason, the applicable price for this quantity is $ 0.98
For C = $ 0.98, holding cost, H = 0.98*20% = $ 0.196
Revised EOQ = sqrt(2*240000*400/0.196) = 31,298 sq ft
Total annual cost of EOQ policy = D*C + H*Q/2 + S*D/Q
= 240000*0.98 + 0.196*31298/2 + 400*240000/31298
= $ 241,334.5
Now consider the next level of price, C = $ 0.96
Holding cost, H = 0.96*20% = $ 0.192
EOQ = sqrt(2*240000*400/0.192)
= 31633 sqft
This amount is will not be feasible for this price, because it requires a minimum order of 40000 sqft.
Therefore, Q = 40,000
Total annual cost = 240000*0.96 + 0.192*40000/2 + 400*240000/40000
Total annual cost = $ 236,640
Total annual cost is lowest for order quantity of 40,000 sq ft.
1) Optimal lot size = 40,000 sq ft.
2) the annual cost of this policy
= $ 236,640
3) the cycle inventory of plywood at Prefab = Q/2 = 40000/2
At prefeb= 20,000 sq ft
4) let's assume the manufacturer sells all plywood at $ 0.96, then
Holding cost, H = 0.96*20%
H= $ 0.192
EOQ = sqrt(2*240000*400/0.192)
EOQ = 31633 sqft
Total annual cost = 240000*0.96 + 0.192*31633/2 + 400*240000/31633
Total annual cost = $ 236,471.6
Difference in total annual cost = 236640 - 236471.6 = $ 168.4
On January 1, Gemstone Company obtained a $165,000, 10-year, 7% installment note from Guarantee Bank. Thenote requires annual payments of $23,492, with the first payment occurring on the last day of the fiscal year. The firstpayment consists of interest of $11,550 and principal repayment of $11,942. The journal entry to record the issuance of the installment note for cash on January 1 would include a:_____
Answer:
Credit to notes payable for $165000
Explanation:
Journal entries for issuance of Note Payable :
Cash Account ..... Debit $165000
7% Note payable Accounts .... Credit $165000
Note:
Note payable is a liability so it is credited as on date of issuance.
To encourage employee ownership of the company's common shares, KL Corp. permits any of its employees to buy shares directly from the company through payroll deduction. There are no brokerage fees and shares can be purchased at a 12% discount. During May, employees purchased 10,000 shares at a time when the market price of the shares on the New York Stock Exchange was $12 per share. KL will record compensation expense associated with the May purchases of:
Answer:
Dr Cash 105,600
Dr Compensation Expense 14,400
Cr Common Stock 10,000
Cr Paid-In Capital – Excess of Par 110,000
Explanation:
KL Corp Journal entry
Dr Cash 105,600
Dr Compensation Expense 14,400 (10,000*12*12%)
Cr Common Stock 10,000 (10,000*1)
Cr Paid-In Capital – Excess of Par 110,000
(10,000*(12-1))
We can consider the case where wine producers in Chile ask the government to tax imported wines from France with a tax. They consider that this tax would increase both the State's tax revenue and employment in the Chilean wine industry. What kind of economic argument is this in relation to international trade? Do you agree or not with the argument presented by wine producers in Chile? If the state government adopts this position, does it consider it to be good economic policy or not? Briefly explain your answers using the concepts of international trade discussed in your Textbook.
Answer:
If the Government executes taxes on lavender trade from France (therefore creating French wine beloved than national wine), the local wine manufacturers would take pleasure in such a strategy because it would create French wine much economical (since it'll value extra) and therefore doubtless growth in local wine drinking. This might additional because additional service chances within the national wine region and conjointly rise the Government's government revenue (income from taxes on the wine trade). Such a procedure is hidden wanting i.e. an advocate procedure in expressions of Global trade wherever the govt. is protective the benefits of the native wine manufacturers by heavy imports.
If the Chilean wine trade isn't terribly inexpensive in relations of value, feature etc. and remains at an emergent phase then it's vital to safeguard the local trade from global competition.
On March 15, American Eagle declares a quarterly cash dividend of $0.045 per share payable on April 13 to all stockholders of record on March 30.
Required:
Record American Eagle's declaration and payment of cash dividends for its 226 million shares. (If no entry is required for a particular transaction/event, select "No Journal Entry Required" in the first account field. Enter your answers in dollars, not in millions (i.e. $5.5 should be entered as 5,500,000).)
Answer and Explanation:
The journal entries are shown below:
On March 15
Dividend Dr $10,170,000 (226 million shares × $0.045 per share)
To Dividend payable $10,170,000
(Being the dividend is declared)
For recording this we debited the dividend as it increased the balance of dividend and credited the dividend payable as it increased the liabilities
On March 30
No journal entry is required for recording of dividend
On April 13
Dividend payable $10,170,000
To cash $10,170,000
For recording this we debited the dividend payable as it decreased the liabilities and credited the cash as it reduced the assets
(Being the dividend payable is recorded)
How are foreign exchange rates determined
Answer:
Currency prices can be determined in two main ways: a floating rate or a fixed rate. A floating rate is determined by the open market through supply and demand on global currency markets. ... 5 Therefore, most exchange rates are not set but are determined by on-going trading activity in the world's currency markets.
Answer: market forces for. a p e x
Explanation:
just did that bro
On January 1, 2021, Swifty Corporation had 106000 shares of its $5 par value common stock outstanding. On June 1, the corporation acquired 10300 shares of stock to be held in the treasury. On December 1, when the market price of the stock was $13, the corporation declared a 15% stock dividend to be issued to stockholders of record on December 16, 2021. What was the impact of the 15% stock dividend on the balance of the retained earnings account?
Answer:
Decrease by $186,615
Explanation:
The impact of the 15% stock dividend on the balance of the retained earnings account is shown below:-
Shares = 106000 - 10300
= 95,700
Dividend of 15% = 95,700 × 15%
= $14,355
Value of shares = Dividend × Market price of the stock
= $14,355 × $13
= $186,615
So, the retained earning will decrease by $186,615
Wayne Industries is building a new prototype riding lawnmower especially for women. The marketing strategy for the product has been developed and presented. The lawnmower is now being tested rigorously. This step will ensure that the product meets all the CPSC product specifications and leaves little chance for any product liability issues. Which step int he new product development process is this?
A) After this stage, no changes can be made in any aspect of the product design, features, or composition.
B) At this stage, the functional features and the intended psychological characteristics are combined.
C) The new product at this stage can be distributed through a full-scale roll-out immediately.
D) The new lawnmower is at the introductory stage of the lifecycle.
E) The new-product idea is at the last stage of the development process.
Answer:
The answer is option E) The new-product idea is at the last stage of the development process.
Explanation:
The are several stages in the development of a new product idea. Beginning with initial idea generation all the way to the final evaluation stage.
The new prototype riding lawnmower especially for women designed by Wayne Industries is at the last stage of the development process.
The last stage of the development process also known as the Evaluation phase is characterized by:
Presenting the marketing strategy developed for the product.ensuring that the product meets all the CPSC product specifications and leaves little chance for any product liability issues.You should meet with your academic adviser at least once a __________.
Group of answer choices
Answer:
Once a Semester
Explanation:
Advisors can help you decide if you want to minor in something, and what the requirements are. They can ensure you're odds of graduating in four years is on track, or give you special permissions to take certain classes.
11. a. Suppose David spends his income M on goods x1 and x2, which are priced p1 and p2, respectively. David’s preference is given by the utility function
(1, 2) = √1 + √2.
(i) Derive the Marshallian (ordinary) demand functions for x1 and x2. (25 marks)
(ii) Show that the sum of all income and (own and cross) price elasticity of demand
for x1 is equal to zero. (25 marks) b. For Jimmy both current and future consumption are normal goods. He has strictly convex and strictly monotonic preferences. The initial real interest rate is positive. If the real interest rate falls, in each of the following cases, argue what will happen to his period 2 consumption level? Clearly illustrate your argument on a graph.
(i) He is initially a borrower. (25 marks)
(ii) He is initially a lender. (25 marks)
Answer:
Explanation:
D
The requirement that certain professionals possess a license in order to work in a particular market has the effect of reducing the supply of those services, which in turn causes _________.
O price and the profits of firms in the market to increase.
O price to decrease and the profits of firms in the market to increase.
O price to increase and the profits of firms in the market to decrease.
O price and the profits of firms in the market to decrease.
Answer:
C
Explanation:
The correct option is C :price to increase and the profits of firms in the market to decrease
This can be explained by the fact that, since it always been mandatory to possess a license in order to work in a particular market. This certainly reduces the competition in the market and thus, the prices would increase; therefore, as the firms have to pay for licence thus would reduce the profits of firm.
Swan Company produces its product at a total cost of $43 per unit. Of this amount, $8 per unit is selling and administrative costs. The total variable cost is $30 per unit, and the desired profit is $20 per unit. The markup percentage on product cost is a.47% b.70% c.110% d.80%
Answer:
46.50%.
Explanation:
Percentage Markup = ( Desired profit x 100 ) / Total cost.
($20 × 100 ) / $43 = 46.50%.
I hope my answer helps you
The following units of an item were available for sale during the year: Beginning inventory 8,100 units at $180 Sale 5,300 units at $300 First purchase 15,000 units at $185 Sale 13,000 units at $300 Second purchase 16,000 units at $192 Sale 14,000 units at $300 The firm uses the perpetual inventory system, and there are 6,800 units of the item on hand at the end of the year. a. What is the total cost of the ending inventory according to FIFO? $ b. What is the total cost of the ending inventory according to LIFO?
Answer:
a. $1,305,600
b. $1,258,000
Explanation:
FIFO - Assumes that the first goods received by the business will be first ones to be delivered to the final customer
FIFO Inventory = 6,800 units × $ 192 = $1,305,600
LIFO - Assumes that the last goods purchased are the first ones to be issued to the final customer
LIFO Inventory = 2,800 units × $180 = $ 504,000
2,000 units × $185 = $ 370,000
2,000 units × $ 192 = $ 384,000
Total = $1,258,000
Contribution Margin Variance, Contribution Margin Volume Variance, Market Share Variance, Market Size Variance Sulert, Inc., produces and sells gel-filled ice packs. Sulert’s performance report for April follows: Actual Budgeted Units sold 290,000 300,000 Sales $1,450,000 $1,515,000 Variable costs 652,500 636,300 Contribution margin $ 797,500 $ 878,700 Market size (in units) 1,250,000 1,200,000 Required: 1. Calculate the contribution margin variance and the contribution margin volume variance. In your computations, round the contribution margin per unit to three decimal places. Contribution margin variance $ Unfavorable Contribution margin volume variance $ Unfavorable 2. Calculate the market share variance and the market size variance. In your computations, round the unit contribution margin to three decimal places and round the market share percentage to one decimal place (for example, .8439 would be rounded to 84.4%). Round your final answers to the nearest dollar. (CMA adapted) Market share variance $ Unfavorable Market size variance $ Favorable
Answer:
1. Market share variance= $65,903(Unfavorable)
2. Market size variance= $36,613(favourable)
Check attachment for the table
Southern Rim Parts estimates its manufacturing overhead to be $318,000 and its direct labor costs to be $1,060,000 for year 1. The first three jobs that Southern Rim worked on had actual direct labor costs of $65,000 for Job 301, $90,000 for Job 302, and $175,000 for Job 303. For the year, actual manufacturing overhead was $399,000 and total direct labor cost was $834,000. Manufacturing overhead is applied to jobs on the basis of direct labor costs using predetermined rates.Required:a. How much overhead was assigned to each of the three jobs, 301, 302, and 303?b. What was the over- or underapplied manufacturing overhead for year 1?
Answer:
a. Job 301 = $19,500
Job 302 = $27,000
Job 303 = $52,500
b. Overhead applied for the year = $250,200
Under-applied overhead = $148,800
Explanation:
a. The computation of overhead was assigned to each of the three jobs, 301, 302, and 303 is shown below:-
Overhead application rate = Budgeted Overhead ÷ Application Base
Application base = Budgeted Overhead ÷ Budgeted Direct Labor costs
= $318,000 ÷ $1,060,000
= 0.3
Overhead assignment to jobs = Budgeted rate × Labor Cost
Job 301
= 0.3 × $65,000
= $19,500
Job 302
= 0.3 × $90,000
= $27,000
Job 303
= 0.3 × $175,000
= $52,500
b. The computation of over- or underapplied manufacturing overhead for year 1 is shown below:-
Overhead applied for the year = Total direct labor cost × Overhead rate
= $834,000 × 0.3
= $250,200
Under-applied overhead = Actual overhead - Applied overhead
= $399,000 - $250,200
= $148,800
• Why has the stock market declined so much?
We need a passage or something. not just the question
Who has the comparative advantageLOADING... in producing oil? A. Norway has a comparative advantage producing oil because its opportunity cost of producing oil is lower. B. Neither country has a comparative advantage producing oil because their opportunity costs of producing oil are equal. C. The United Kingdom has a comparative advantage producing oil because its opportunity cost of producing oil is lower. D. Norway has a comparative advantage producing oil because it can produce more oil. E. The United Kingdom has a comparative advantage producing oil because it can produce more oil.
Answer:
The answer is option D) Norway has a comparative advantage producing oil because it can produce more oil.
Explanation:
Norway currently produces 1,398 thousand barrels of crude oil per day. At this capacity, it can produce more oil in comparison to United Kingdom that produces 1000 thousand barrels per day.
This statistics gives Norway a comparative advantage over United Kingdom.
Also comparing the consumption rate for both countries with Norway having a population of 5,421,241 which is far less than 66, 650,000 of the United Kingdom, shows that Norway will have enough to cater for her citizens as well as for exports.
Which of the following scenarios are potential candidates for the Chi-square test? Check all that apply. Group of answer choices Is there a relationship between gender and pet ownership? Is there a relationship between martial status (single, married, divorced, widowed) and political party affiliation (Democrat, Independent, Republican)? Is there a relationship between amount of credit card debt and employment status (unemployed, employed part-time, employed full-time)?
Answer:
A. Is there a relationship between gender and pet ownership?
B. Is there a relationship between marital status (single, married, divorced, widowed) and political party affiliation (Democrat, Independent, Republican)?
Explanation:
The chi squared test is a test in statistics used to establish the relationship between categorical variables. It seeks to compare the observed results in an experiment to the expected results. The test assumes that the variables being compared are independent of each other.
Categorical variables are descriptive and qualitative in nature. Numerical variables, on the other hand, deal with numbers. The amount of credit card debt is a numerical value, and therefore, does not qualify as a chi squared variable.
Margie Company produces a single product and has provided the following data concerning its most recent month of operations: Selling price $ 88 Units in beginning inventory 0 Units produced 5,200 Units sold 4,900 Units in ending inventory 300 Variable costs per unit: Direct materials $ 12 Direct labor $ 23 Variable manufacturing overhead $ 2 Variable selling and administrative expense $ 5 Fixed costs: Fixed manufacturing overhead $ 161,200 Fixed selling and administrative expense $ 63,700 The total contribution margin for the month under variable costing is:
Answer:
$225,400
Explanation:
The computation of total contribution margin under variable costing is shown below:-
Sales (4900 × $88) $431,200
Less:Variable cost
Direct material (4900 × $12) ($58,800)
Direct labor (4900 × 23) ($112,700)
Variable manufacturing overhead
(4900 × 2) ($9,800)
Variable selling and administrative
expenses (4900 × $5) ($24,500)
Total variable expenses ($205,800)
Contribution margin $225,400
Therefore the total contribution margin under variable costing is $225,400
Oriole Tire Co. just paid an annual dividend of $1.70 on its common shares. If Oriole is expected to increase its annual dividend by 3.10 percent per year into the foreseeable future and the current price of Oriole’s common shares is $19.65, what is the cost of common stock for Oriole? (Round intermediate calculations to 4 decimal places, e.g. 0.1555 and final answer to 2 decimal places, e.g. 15.25%.)
Answer:
Cost of common stock is 12.02%
Explanation:
The cost of common stock can be computed from share price formula given below:
share price=do*(1+g)/r-g
do is the dividend just paid which is $1.70
g is the expected dividend growth per year which is 3.10%
r is the cost of common stock which is unknown
share price is $19.65
by changing the subject of the formula:
r=do*(1+g)/share price+g
r=1.70*(1+3.10%)/19.65+3.10%
r=1.7527/19.65+3.10%
r=0.0892+3.10%=12.02%
The company's cost of capital which is also the cost of common stock is 12.02%
A Company manufactures coffee tables. The Company has a policy of adding a 20% markup to full costs and currently has excess capacity. The following information pertains to the company's normal operations per month: Output units 30,000 tables Machine-hours 6000 hours Direct manufacturing labor-hours 10,000 hours Direct materials per unit $50 Direct manufacturing labor per hour $12.00 Variable manufacturing overhead costs $322,500 Fixed manufacturing overhead costs $1,200,000 Product and process design costs $600,000 Marketing and distribution costs $1,290,000 For long-run pricing of the coffee tables, what price will most likely be used by the Company
Answer:
$201.30
Explanation:
Direct materials = $50
Total Direct manufacturing labor = $12.00 * 10,000 = $120,000
Variable manufacturing overhead costs = $322,500
Fixed manufacturing overhead costs = $1,200,000
Product and process design costs = $600,000
Marketing and distribution costs = $1,290,000
Total cost apart from direct material = $120,000 + $322,500 + $1,200,000 + $600,000 + $1,290,000 = $3,532,500
Cost per unit apart from direct material = $3,532,500 / 30,000 = $117.75
Total cost per unit = $117.75 + $50 = $167.75
Mark up per unit = $167.75 * 20% = $33.55
Price per unit = $167.75 + $33.55 = $201.30
Answer: $201.30
Explanation:
To solve this all the expenses incurred per unit need to be included in the unit.
Direct Materials $50
Direct Manufacturing Labour Hours per unit
= (10,000/30,000 units) * 12 (direct Manufacturing Labour per hour)
= $4
Variable Manufacturing Overhead Cost
= 322,500/30,000
= $10.75
Fixed manufacturing overhead costs
= 1,200,000/30,000
= $40
Product and process design costs
= 600,000/30,000
= $20
Marketing and distribution costs
= 1,290,000/30,000
= $43
Adding everything up,
= 50 + 4 + 10.75 + 40 + 20 + 43
= $167.75
Company adds 20% to costs so,
= 167.75 * ( 1 + 20%)
= $201.30
Company will most likely sell at $201.30
