based on the chromatogram, which amino acids or substances were present in the hydrolyzed equal sample?

Amino acids as acidic, basic, neutral polar, or neutral nonpolar are

Part A: NH₂: Basic, CH₃: Neutral nonpolar, CH₃: Neutral nonpolar, CH: Neutral nonpolar, NH₂: Basic, CH₂: Neutral nonpolar, H,N-C-coo: Acidic

Part B: OH: Neutral polar, CH₂: Neutral nonpolar, HON-C-COO: Acidic, H,N-C-COO: Acidic.

Acidic amino acids: These amino acids have a carboxyl group (COOH) in their side chain, which makes them acidic. They can donate a hydrogen ion (H+) and have a negative charge at physiological pH.

Basic amino acids: These amino acids contain an amino group (NH2 or NH3+) in their side chain, which makes them basic. They can accept a hydrogen ion (H+) and have a positive charge at physiological pH.

To learn more about the Amino acids, follow the link:

https://brainly.com/question/31872499

#SPJ12

The actual molecule for this Lewis structure is BeF2 (Beryllium Fluoride). The ideal angle of the molecule is 180°. This is because the two Fluorine atoms have single bonds to the Beryllium atom, and two single bonds always form a linear shape. The bond angle is 180° in linear molecules.

The angles in the actual molecule of which the given Lewis structure is for can be determined by looking at the VSEPR theory. According to VSEPR theory, the shapes of the molecules are determined by the number of electron groups surrounding the central atom. The electron groups can be either bonding or non-bonding, and they repel each other, which results in the formation of a particular shape or geometry.

The ideal angles of the molecules are as follows:Linear shape: 180 degrees Trigonal planar shape: 120 degrees Tetrahedral shape: 109.5 degrees Trigonal bipyramidal shape: 120 degrees (equatorial) and 90 degrees (axial)Octahedral shape: 90 degrees.The actual angles may deviate slightly from the ideal angles due to the fact that different electron groups may have slightly different sizes. This is known as the lone pair-bond pair repulsion. It is important to note that the actual angles of the molecule depend on the type of bonding that takes place between the atoms of the molecule.

More on Lewis structure: https://brainly.com/question/12476602

#SPJ11

The heat transfer during the combustion of n-octane gas (C8H18) with 95% excess air in a constant pressure burner is 37039 kJ/kg fuel. This is calculated using the enthalpy of the formation of the products and reactants. The air and fuel enter the burner steadily at standard conditions, and the products of combustion leave at 265°C.

The enthalpy of combustion of the fuel is determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products. The enthalpy of formation of the reactants is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result.

The enthalpy of formation of the products is determined by multiplying the standard enthalpy of formation for each compound in the reaction by the number of moles of each compound and adding the result. The heat transfer during combustion is then determined by subtracting the enthalpy of formation of the reactants from the enthalpy of formation of the products, resulting in 37039 kJ/kg fuel.

The heat transfer during the combustion of n-octane gas (C8H18) can be calculated using the formula Q = m × Cp × ΔT. Here, m is the mass of the fuel burnt, Cp is the specific heat capacity, and ΔT is the change in temperature. Let's substitute the given values: Mass of fuel burnt = 1 kg (since 37039 kJ/kg fuel is given)Cp of n-octane gas = 2.22 kJ/kg/K (given)ΔT = (265 - 25) = 240 K (since the temperature of products is given as 265°C = 538 K and standard temperature is 25°C = 298 K)Therefore, the heat transfer during combustion of n-octane gas is: Q = m × Cp × ΔT = 1 × 2.22 × 240 = 532.8 kJAnswer: The heat transfer during this combustion is 532.8 kJ.

For more information follow the link: https://brainly.com/question/14754029

#SPJ11

Answer:

oxygen friend

Explanation:

It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.

According to the given Information:

The aqueous solution that has the lowest freezing point is 1.0 M C2H5OH (ethanol).

Because it determines the concentration of solute particles in the solution.

Ionic solutes, such as NaCl, dissociate into multiple ions in water, producing a higher concentration of solute particles per unit concentration than molecular solutes, such as ethanol.

This results in a greater degree of freezing point depression for ionic solutes than molecular solutes.

An aqueous solution is one in which water serves as the solvent.

Aqueous solutions are very common in nature and in laboratory settings. Many substances can dissolve in water to form aqueous solutions, including salts, acids, bases, and gases.

Aqueous solutions are important in many fields of science, including chemistry, biology, and environmental science.

To know more about aqueous solution, visit:

https://brainly.com/question/13608038

#SPJ1

The average mass of chemistrium (Ch) in amu is: 12.5 amu.

Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.

If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:

Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.

Learn more about element: https://brainly.com/question/25608430

#SPJ11

The correct sequence of steps in the formation of an action potential is as follows: 4. a graded depolarization brings an excited membrane to threshold potential, 6. voltage-gated Na+ channel activation occurs, 7. Na+ enter the cell and depolarization occurs, 1. voltage-gated Na+ channels are inactivated, 2. voltage-gated K+ channels open and K+ move out of the cell, 3. voltage-gated Na+ channels regain their normal properties, and 5. a temporary hyperpolarization occurs.
Explanation: Action potential is generated when a neuron sends information down an axon, away from the cell body. The steps involved in the formation of an action potential are:Graded depolarization occurs, which brings an excited membrane to threshold potential.Na+ enters the cell and depolarization occurs.Voltage-gated Na+ channel activation occurs.Voltage-gated Na+ channels are inactivated.Voltage-gated K+ channels open and K+ move out of the cell.A temporary hyperpolarization occurs.Voltage-gated Na+ channels regain their normal properties, which complete the cycle.Action potential is a result of ions moving in and out of the cell membrane, which changes the voltage difference between the inside and outside of the cell membrane. Action potential, therefore, involves the sequential opening and closing of different types of voltage-gated ion channels, including sodium (Na+) and potassium (K+) channels.

For more such questions on hyperpolarization

https://brainly.com/question/15997473

#SPJ11

Answer: I think its 111.6

Explanation:

A magnetic force is what moves the compass needle when it is in close proximity to a particular kind of metal. This is so because the magnetic fields of the metal item and the compass needle interact to create a force.

Permanent magnets, electric currents, and various types of metals may all be surrounded by magnetic fields, which are created by moving charges like electrons. The compass needle will move or align itself with the magnetic field lines when a magnetic field is applied to a magnetic substance, such as that material.If the compass is placed next to a metal item, the metal must likewise have a magnetic field or be able to create one when exposed to one. The compass needle moves as a result of the force created by the interaction of the magnetic fields, revealing the existence and direction of the magnetic field generated by the metal item.

learn more about compass needle here:

https://brainly.com/question/2577109

#SPJ4

Absolute dating and relative dating are two methods used by scientists to determine the age of rocks, fossils, and other geological materials.

Relative dating involves comparing the placement of fossils in rock layers. By analysing the sequence of rock layers, scientists can determine the relative ages of fossils and other materials. For example, if a fossil is found in a layer of rock that is below another layer, it is considered to be older than the layer above it.

Absolute dating involves using scientific methods to determine the exact age of a material. This is often done using radiometric dating techniques, which involve measuring the amount of certain isotopes in a sample.

Carbon-14 dating is based on the fact that carbon-14, an isotope of carbon, is created when cosmic rays interact with nitrogen in the atmosphere. Plants and animals take in carbon-14 through photosynthesis and eating, and the carbon-14 decays over time at a known rate. By measuring the amount of carbon-14 in a sample, scientists can determine the age of the material.

Radiometric dating is a technique used to date rocks and other geological materials based on the decay rate of radioactive isotopes. For example, uranium-lead dating can be used to date rocks that are billions of years old, by measuring the amount of uranium and lead in the sample and calculating how long it has been decaying.

To find out more about dating techniques, visit:

https://brainly.com/question/12291163

#SPJ1

The average number of molecules adsorbed by the table is the number of different ways of placing a total of r particles on n adsorption sites when two particles can occupy each site given by (r + n-1) C (n-1).

This formula follows from the fact that each placement corresponds to choosing n-1 boundaries that divide the particles into n groups (each group may be empty) and then putting one group into each adsorption site. Thus the required number of ways is(r + n-1) C (n-1). The number of ways of placing r particles on n adsorption sites when one or two particles can occupy each site is the sum of the number of ways in which exactly one particle occupies a site and the number of ways in which two particles occupy a site. Each adsorption site can be either empty, occupied by one molecule, or occupied by two molecules. Therefore, there are three different states that each adsorption site can have. There are n adsorption sites, and therefore there are 3n different states that the table can have. Each state is characterized by the number of molecules adsorbed by the table. Therefore, the average number of molecules adsorbed by the table is given by the sum of the number of molecules adsorbed in each state, divided by the total number of states. The number of molecules adsorbed in each state is the sum of the number of molecules adsorbed by each adsorption site, overall adsorption sites. Therefore, the number of molecules adsorbed in each state is either 0, 1, or 2.

Learn more about  ideal gas   at brainly.com/question/28257995

#SPJ4

Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.

Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.

Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.

The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.

To learn more about "menthol", visit: brainly.com/question/21296029

#SPJ11

A catalyst will not have an impact on the position of equilibrium. Therefore option a is the correct answer.

Specifically, a catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It does this by providing an alternative reaction pathway with a lower activation energy, which increases the reaction rate and therefore speeds up the rate at which equilibrium is achieved. The transition energy of the equilibrium is also lowered, meaning it will be easier for the reaction to move from the reactants to the products.

Therefore catalysts can alter the rate at which a reaction proceeds, but they cannot influence the position of equilibrium.

learn more about catalyst

https://brainly.com/question/318426

#SPJ11

Fermentation in certain types of yeast occurs in the absence of oxygen.

Fermentation is an anaerobic metabolic process that occurs in the absence of oxygen, which converts sugar into cellular energy, primarily adenosine triphosphate (ATP), and produces carbon dioxide and alcohol as waste products. Fermentation is used in a variety of industrial and food production processes. Yeast, a type of fungus, is used to ferment carbohydrates and produce carbon dioxide and alcohol in bread baking, winemaking, and beer brewing. Lactobacilli bacteria are used in the production of yogurt and cheese by fermenting milk lactose.

There are two types of fermentation processes: alcoholic fermentation and lactic acid fermentation.

for such more question on Fermentation

https://brainly.com/question/11554005

#SPJ11

The theoretical yield of the solid product FeCO₃ in the reaction here is 18.18 grams. This is because, FeCl₂ is a limiting agent.

The precipitation reaction occurring between iron (II) chloride, FeCl₂ and potassium carbonate K₂CO₃

The Molecular equation is given below: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

The Complete Ionic equation is given below: Fe₂⁺ + 2Cl⁻ + 2K⁺ + CO₃²⁻ → FeCO₃ + 2K⁺ + 2Cl⁻

The Net Ionic equation is given below: Fe²⁺ + CO₃²⁻→ FeCO₃

Molar mass of FeCl₂ = 126.75 g/mol

Molar mass of K₂CO₃ = 138.21 g/mol

n(FeCl₂) = mass/Mr = 20/126.75 = 0.1578 m

n(K₂CO₃) = mass/Mr = 25/138.21 = 0.1808 m

Therefore, FeCl₂ is the limiting agent. The theoretical yield of FeCO₃ can be calculated as follows: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

1 mole of FeCl₂ produces 1 mole of FeCO₃

Moles of FeCO₃ produced = 0.1578 mol

FeCO₃ molar mass = 115.86 g/mol

Mass of FeCO₃ produced = 0.1578 mol × 115.86 g/mol = 18.18 g

Thus, the theoretical yield of the solid product FeCO₃ is 18.18 g.

Learn more about Theoretical yield here:

https://brainly.com/question/14966377

#SPJ11

The chemical contains 18.26% hydrogen in terms of percentage.

A fundamental physical characteristic of matter is mass, which expresses how much matter is present in an item. It serves as a gauge for an object's resistance to acceleration, therefore the more massive an object, the more force is needed to move it.

Calculating the total mass of the compound and the mass of the hydrogen in the compound is necessary to determine the percent composition of hydrogen in the compound.

mass of compound = sum of masses of carbon, hydrogen, and nitrogen.

mass of the mixture= 9.5 g + 3.40 g + 5.71 g

Mass of the compound= 18.61 g.

The compound's mass of hydrogen is:

mass of hydrogen=3.40 g

We can use the following formula to determine the percentage composition of hydrogen:

The percentage of hydrogen=quantity of hydrogen/ the total mass of the chemical x 100%

When we enter the values, we obtain:

hydrogen content as a percentage = (3.40 g/18.61 g) x 100% = 18.26%

Thus, 18.26% of the compound is hydrogen, according to its percent composition.

To know more about mass, visit:

https://brainly.com/question/19694949

#SPJ1

Answer:

2,1,1  

Explanation:

To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.

When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.

We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:

HCl + NaOH NaCl + H2O

One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.

Let's first determine the quantity of NaOH in moles.

Moles of NaOH = volume (in liters) x molarity

Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M

Moles of NaOH = 0.040 moles

moles of HCl = volume (in liters) x molarity

0.040 moles = volume (in liters) x 0.20 M

Volume (in liters) = 0.040 moles / 0.20 M

Volume (in liters) = 0.20 L

Finally, we can convert the volume from liters to milliliters:

Volume (in milliliters) = 0.20 L x (1000 mL/1 L)

Volume (in milliliters) = 200 mL

To know more about NaOH visit:-

https://brainly.com/question/29854404

#SPJ1

When the initial compound formed from cyclohexanone and morpholine is mixed with methyl iodide and heated and then hydrolyzed, the product that is finally formed is N-Methylaminoethylcyclohexanone.

The reaction between cyclohexanone and morpholine in the presence of an acid catalyst produces a cyclic imine named N-morpholino-cyclohexanone, which is an intermediate in the synthesis of several drugs. It reacts with methyl iodide and potassium carbonate in methanol to form N-methylaminoethylcyclohexanone, which upon hydrolysis produces the final product, N-methylaminoethylcyclohexanone. This reaction is an example of the Mannich reaction.N-methylaminoethylcyclohexanone is a synthetic intermediate and a building block for the synthesis of various drugs. It's commonly used as an intermediate in the synthesis of sedatives and analgesics. It's also used in the synthesis of ephedrine analogs and the anticancer agent 2-[2-(4-ethoxyphenyl)ethyl]aminoethylcyclohexanone.

Learn more about hydrolysis here: https://brainly.com/question/30578484

#SPJ11

The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.

Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,

            AB → A+B.

This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .

To learn more about Decomposition reaction

https://brainly.com/question/16728382

#SPJ4

Poisoning proton pumps impact anion uptake in such a way that  It would decrease the uptake of anions by passive diffusion.

The process by which molecules diffuse from a region of higher concentration to a region of lower concentration is known as passive diffusion. It is the most important mechanism for drug passage across membrane.

Diffusion is the net movement of material from a high concentration area to a low concentration area. The concentration gradient is the difference in concentration between the two areas, and diffusion will continue until this gradient is eliminated. Because diffusion transports materials from a high concentration area to a low concentration area

to know more about passive diffusion , visit ;

brainly.com/question/1304999

#SPJ1

The systems that would be best modeled by an ideal solution are (i) ethane n-decane, (iii) benzene toluene. If any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities. A solution is said to be ideal if the solution behaves like an ideal gas, which means that there are no intermolecular interactions between the molecules of the components. i.e., the solution will obey Raoult's law.

The systems that would be best modeled by an ideal solution are(i) ethane n-decane(ii) water 1-butanol(iii) benzene toluene. An ideal solution occurs when the components of a mixture form a homogeneous mixture that does not exhibit deviations from Raoult's law. Since the ideal mixture is composed of solvent and solute, it is impossible to completely exclude interactions between the two components.  

It is best suited for non-polar and small polar solutes. In this way, the non-ideality of the solution can be predicted. Therefore, if any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities.

For more information about Raoult's law refer here

https://brainly.com/question/28304759

#SPJ11

The change that is useful for the environment and living things is called "positive environmental change."

Positive environmental change refers to any alteration or modification in the environment that improves or benefits living organisms' well-being. Examples of positive environmental changes include reducing pollution, conserving water, using renewable energy sources, and recycling waste products. Positive environmental change is essential to ensure a sustainable future and to maintain the planet's biodiversity.

It can be achieved by implementing new policies, practices, and technologies that promote sustainable development and reduce the negative impact on the environment. Positive environmental change can also help to address climate change and other environmental challenges faced by humanity. By taking positive steps to protect the environment, we can ensure that future generations can also enjoy a healthy, prosperous, and sustainable planet.

To learn more about positive environmental change, here

https://brainly.com/question/30033700
#SPJ4

To estimate the system pressure and vapor-phase mole fraction when x1 = 0.8, we can use the 1-parameter Margules equation.

This equation assumes that the vapor-liquid equilibrium is a linear relationship between the mole fraction of each component.

Since the given experiment gives us three points, we can use linear interpolation to estimate the parameters of the Margules equation.

From the given experiment, we know the values for x1, y1, and P when x1 = 0.0, 0.2, and 1.0 respectively. Therefore, we can calculate the slope and y-intercept of the Margules equation as follows:

Slope = (P2 - P1)/(y2 - y1) = (68.23 - 41.02)/(0.51 - 0.0) = 68.23

y-intercept = P1 - (slope * y1) = 41.02 - (68.23 * 0.0) = 41.02

Using these values and the x1 value of 0.8, we can then estimate the system pressure and vapor-phase mole fraction as follows:

System Pressure = (slope * 0.8) + y-intercept = (68.23 * 0.8) + 41.02 = 78.2 kPa

Vapor-phase Mole Fraction = (System Pressure - y-intercept) / slope = (78.2 - 41.02) / 68.23 = 0.80

Therefore, the estimated system pressure and vapor-phase mole fraction when x1 = 0.8 is 78.2 kPa and 0.80 respectively.

For more information about Margules equation refer here

https://brainly.com/question/14103505?

#SPJ11

The percentage yield of CaSO3 is approximately 69%.

CaCO3 + SO2 → CaSO3 + CO2

Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol

Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol

Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:

Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g

Percentage yield = (Actual yield / Theoretical yield) x 100%

The actual yield is given as 198 g. Plugging in the values, we get:

Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.

Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.

For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.

Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.

To learn more about Stoichiometric visit here:

brainly.com/question/6907332

#SPJ4

The answer to this question is D) specific heat. When determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

Specific heat- Specific heat is the amount of heat that must be added or removed from a unit of mass of a substance to increase or decrease its temperature by one degree Celsius or Kelvin. The amount of heat required to alter the temperature of a material varies depending on the nature of the substance. As a result, specific heat is a factor that is unique to each substance.

D) specific heat is correct because it is the unique factor for each substance when calculating the energy change associated with a change in temperature.

In conclusion, it is important to consider that when determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

To learn more about "energy change", visit: brainly.com/question/30083274

#SPJ11

Part A: True.

Part B: False. Rinsing with water may not be enough to clean the buret completely.

Part C: False. Soapy water should not be used to clean a buret since it can leave residue.

Part D: False. After rinsing with water and soapy water solution, the buret should be rinsed with distilled water and dried before adding the titrating solution.

Part E: False. The buret should be rinsed with the titration solution only once before beginning a titration.

Titration is a laboratory procedure used to compare a solution's concentration to that of a reference solution with known concentration. It entails gradually mixing the standard solution into the sample solution up until the reaction is finished, which can be detected by a colour change or another quantifiable signal.

In many disciplines, including chemistry, medicine, and environmental research, titration is used. It can be used to quantify the quantity of a certain component in a sample, examine the concentration of acids and bases, and ascertain the purity of a substance.

Titration calls for exact volume and concentration measurements, as well as safe chemical handling and disposal. There are several different kinds of titration techniques, including complexometric, redox, and acid-base titration.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).

To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles

Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol

Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol

Therefore, the mass of 1 mole of solute is 40 grams.

Learn more about Mass here:

https://brainly.com/question/19694949

#SPJ11

According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.

A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.

According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.

To know more kinetic theory of gases, visit,

https://brainly.com/question/11067389

#SPJ4

The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.

Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.

The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.

To solve this problem, we can use the specific heat capacity formula:

Q = m * c * ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We can rearrange this formula to solve for ΔT:

ΔT = Q / (m * c)

We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).

Substituting these values into the equation, we get:

ΔT = 250,000 J / (785 g * 4.184 J/g°C)

ΔT ≈ 75.4°C

Therefore, the final temperature of the water would be:

15.0°C + 75.4°C = 91 °C

So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.

To know more about capacity visit:

https://brainly.com/question/28921175

#SPJ1