Balance the following chemical equation by
providing the correct coefficients.
C3H8 + O2 + CO2 + H2O

A 2.8.4.2
B 1.5.3.4

The question is incomplete. The complete question is :

Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .

Solution :

The balanced reaction for reaction is :

[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]

11.0                      13.0

11/2                       13/1     (dividing by the co-efficient)

6.5 mol               13 mol    (minimum is limiting reagent as it is completely consumed during the reaction)

Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]

                                     = 11.0 mol

Answer:

number of moles of gas increases the volume also increases.

Answer:

a. Na(s); b. Al(s); c. Zn(s)

Explanation:

Let's consider the following redox reactions.

a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)

Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.

b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)

Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.

c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)

Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.

Answer:

A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.

Examples - Superconductors and superfluids are the two examples of BEC.

Explanation:

Answer:

1. Water purification method by reverse osmosis – membrane filtration

2. Method of purifying pure water by filter

3. Demineralization by ion exchange method

3. Demineralization by ion exchange method

Explanation:

Answer:

Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).

Explanation:

Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.

Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).

Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

Learn more about Quantum here ;

https://brainly.com/question/16746749

#SPJ2

Answer:

final-intial temperature= enthalpy change

Answer:

a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M

c. Ksp = [Li⁺] [F⁻]

d. Ksp = 3.8 × 10⁻³

Explanation:

The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.

a. The balanced solubility equilibrium equation for LiF is:

LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. We will make an ICE chart.

        LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

I                       0           0

C                     +S         +S

E                       S           S

Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M

c. The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution.

Ksp = [Li⁺] [F⁻]

d.

Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³

Answer:

True

Explanation:

Aromatic rings undergo nucleophillic substitution reactions in the presence of a electron withdrawing group which stabilizes the Meisenheimer complex.

When the nucleophile attacks the ring carbon atom carrying the eventual leaving group. A resonance-stabilized carbanion intermediate called a Meisenheimer complex is formed.

Subsequent loss of the leaving group from the intermediate complex yields the product of the reaction.

Answer:

a. 4.41 g of Urea

b. 1.5 g of Urea

Explanation:

To start the problem, we define the reaction:

2NH₃ (g) +  CO₂ (g) → CH₄N₂O (s)  +  H₂O(l)

We only have mass of ammonia, so we assume the carbon dioxide is in excess and ammonia is the limiting reactant:

2.6 g . 1mol / 17g = 0.153 moles of ammonia

Ratio is 2:1. 2 moles of ammonia can produce 1 mol of urea

0.153 moles ammonia may produce, the half of moles

0153 /2 = 0.076 moles of urea

To state the theoretical yield we convert moles to mass:

0.076 mol . 58 g/mol = 4.41 g

That's the 100 % yield reaction

If the percent yield, was 34%:

4.41 g . 0.34 = 1.50 g of urea were produced.

Formula is (Yield produced / Theoretical yield) . 100 → Percent yield

The statement that "substance A is rice, and substance B is sugar" is correct.

WHAT IS A MIXTURE?

According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.

Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.

Learn more at: https://brainly.com/question/6594631

Answer: The thermal energy that would be released by 276.0g of sodium acetate trihydrate is 71.8kJ.

Explanation:

Supercooling is the process of lowering the temperature a liquid below its freezing point, without it becoming solid. A liquid below its freezing point will crystallize in the presence of a seed crystal because it serves as a structure for formation of crystals. From the question,

The given mass of sodium acetate trihydrate

(CH3COONa.3H2O)= 276.0g

Molar mass of sodium acetate

trihydrate= 136.08g/mol

Thermal heat of fusion of sodium acetate

trihydrate = 35.9 kJ/mol

From the given mass the number of moles present= 276.0/ 136.08

= 2.0moles

Therefore the heat (thermal) energy of the given mass of sodium acetate

trihydrate = 2.0 × 35.9

= 71.8kJ

Therefore, upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes.

Answer:

option (D) NaOH is right answer

A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.

An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".

Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".

Hence, NaOH can be used to neutralize HF.

To learn more about Neutralization reaction here

https://brainly.com/question/24367029

#SPJ2

Answer:

The total consumer surplus is 240.

Explanation:

If p=12 then q=20

0.5×(36−12)×20=240

here's the graph to help you see the change.

Answer:

a mixture that doesn't really show the ingredients or things put into the material or food.

Answer:

Sr is the more metallic element

Bi is the more metallic element

O is the more metallic element

As is the more metallic element

Explanation:

One thing should be clear; metallic character increases down the group but decreases across the period.

Hence, as we move across the period, elements become less metallic. As we move down the group elements become more metallic.

This is the basis upon which decisions were made about the metallic character of each of the elements listed above.

Answer:

a. It turns color in the presence of an enzyme that us bound to the secondary antibody.

Explanation:

The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.

Answer:

Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)

Answer: it’s checkbox 2&3

The wavelength of the color cyan is 508 nm.

To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:

c = λ x ν

Given:

c = speed of light = 3.00 x 10⁸ m/s (is a constant)

ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹

We introduce the data to calculate the wavelength in m:

λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m

We know that 10⁻⁹m = 1 nm, so we convert λ to nm:

λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm

To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945

Explanation:

Sulfuric Acid (H2SO4) is a strong mineral acid that has is colorless when pure. This chemical is used as a chemical intermediate to manufacture other chemicals and cleaning metal surfaces. The formula for sulfuric acid is H2SO4. The molar mass of sulfuric acid is 98.07848 g mol.

Answer:

[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]

Explanation:

We are asked to find the volume of a solution given the moles of solute and molarity.

Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.

Substitute these values/variables into the formula.

[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]

We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.

[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]

Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.

[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

The units of moles of potassium chloride cancel.

[tex]x= \frac{0.14 }{1.8 L}[/tex]

[tex]x=0.07777777778 \ L[/tex]

The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.

[tex]x \approx 0.078 \ L[/tex]

There are approximately 0.078 liters of solution.

Answer:

c. 29 J

Explanation:

Step 1: Given data

Step 2: Calculate the temperature change

ΔT = 37 °C - 22 °C = 15 °C

Step 3: Calculate the heat (Q) required to raise the temperature of the lead piece

We will use the following expression.

Q = c × m × ΔT

Q = 0.13 J/g.°C × 15 g × 15 °C = 29 J

Answer:

ggggggggggggg

Explanation:

gggggggggggthyjum

Answer:

As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.

Answer:

I think the answer is..

The name of molecules formed by the element.

I hope it will help you !

Answer:

Calcium is a chemical element with the symbol Ca and atomic number 20.

Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth.

Answer:

Tapeworm, also called cestode, any member of the invertebrate class Cestoda (phylum Platyhelminthes), a group of parasitic flatworms containing about 5,000 species. ... Tapeworms also lack a circulatory system and an organ specialized for gas exchange.