Atoms are the particles that all matter is made from. When two or more kinds of atoms combine, they form _______. A. pure elements B. molecules C. metals D. the periodic table

Answers

Answer 1

Answer:

Atoms are the particles that all matter is made from. When two or more kinds of atoms combine, they form pure elements

The answer is option A

Answer 2

Answer:

its molecues

Explanation:


Related Questions

A lab technician uses laser light with a wavelength of 650 nmnm to test a diffraction grating. When the grating is 42.0 cmcm from the screen, the first-order maxima appear 6.09 cmcm from the center of the pattern. How many lines per millimeter does this grating have?

Answers

Answer:

221 lines per millimetre

Explanation:

We know that for a diffraction grating, dsinθ =mλ where d = spacing between grating, θ = angle to maximum, m = order of maximum and λ = wavelength of light.

Since the grating is 42.0 cm from the screen and its first order maximum (m = 1) is at 6.09 cm from the center of the pattern,

tanθ = 6.09 cm/42.0 cm = 0.145

From trig ratios, cot²θ + 1 = cosec²θ

cosecθ = √((1/tanθ)² + 1) = √((1/0.145)² + 1) = √48.562 = 6.969

sinθ = 1/cosecθ = 1/6.969 = 0.1435

Also, sinθ = mλ/d at the first-order maximum, m = 1. So

sinθ = (1)λ/d = λ/d

Equating both expressions we have  

0.1435 = λ/d

d = λ/0.1435

Now, λ = 650 nm = 650 × 10⁻⁹ m

d = 650 × 10⁻⁹ m/0.1435

d = 4529.62 × 10⁻⁹ m per line

d = 4.52962 × 10⁻⁶ m per line

d = 0.00452962 × 10⁻³ m per line

d = 0.00452962 mm per line

Since d = width of grating/number of lines of grating

Then number of lines per millimetre = 1/grating spacing

= 1/0.00452962

= 220.77 lines per millimetre

≅ 221 lines per millimetre since we can only have a whole number of lines.

When you slosh the water back and forth in a tub at just the right frequency, the water alternately rises and falls at each end, remaining relatively calm at the center. Suppose the frequency to produce such a standing wave in a 55m wide tub is 0.80 Hz.

Required:
What is the speed of the water wave?

Answers

Answer:

The  speed of the water wave is [tex]v = 88 \ m/s[/tex]

Explanation:

From the question we are told that

      The  width of the tube is  [tex]L = 55 \ m[/tex]

     The fundamental  frequency is  [tex]f = 0.80 \ Hz[/tex]

Generally the fundamental frequency is mathematically represented as

      [tex]f = \frac{v}{2 * L }[/tex]

=>    [tex]v = f * 2 * L[/tex]

substituting values

       [tex]v = 0.8 * 2 * 55[/tex]

       [tex]v = 88 \ m/s[/tex]

The speed of the water wave will be 88 m/s.

Given information:

When you slosh the water back and forth in a tub at just the right frequency, the water alternately rises and falls at each end, remaining relatively calm at the center.

The frequency of the standing wave is [tex]f=0.8[/tex] Hz.

The width of the tub is [tex]w=55[/tex] m.

Let v be the speed of the standing wave.

The speed of the wave can be calculated as,

[tex]v=2wf\\v=2\times 55\times 0.8\\v=88\rm\; m/s[/tex]

Therefore, the speed of the water wave will be 88 m/s.

For more details, refer to the link:

https://brainly.com/question/1967686

Suppose you observed the equation for a traveling wave to be y(x, t) = A cos(kx − ????t), where its amplitude of oscillations was 0.15 m, its wavelength was two meters, and the period was 2/15 s. If a point on the wave at a specific time has a displacement of 0.12 m, what is the transverse speed of that point?

Answers

Answer:

15m/s

Explanation:

The equation for a traveling wave as expressed as y(x, t) = A cos(kx − [tex]\omega[/tex]t) where An is the amplitude f oscillation, [tex]\omega[/tex] is the angular velocity and x is the horizontal displacement and y is the vertical displacement.

From the formula; [tex]k =\frac{2\pi x}{\lambda} \ and \ \omega = 2 \pi f[/tex] where;

[tex]\lambda \ is\ the \ wavelength \ and\ f \ is\ the\ frequency[/tex]

Before we can get the transverse speed, we need to get the frequency and the wavelength.

frequency = 1/period

Given period = 2/15 s

Frequency = [tex]\frac{1}{(2/15)}[/tex]

frequency = 1 * 15/2

frequency f = 15/2 Hertz

Given wavelength [tex]\lambda[/tex] = 2m

Transverse speed [tex]v = f \lambda[/tex]

[tex]v = 15/2 * 2\\\\v = 30/2\\\\v = 15m/s[/tex]

Hence, the transverse speed at that point is  15m/s

Thomas and Lilian are walking down the street to get to the corner store. They walk 5 blocks up the street and turn right by the stop sign. Once they turn at the stop sign they continue walking for 8 more blocks. They make a left, walk 2 blocks and cross the street to arrive at the corner store. While there they purchase a few snacks, sit at the curb, and then walk back home where they originally started. Thomas and Lilian are discussing their walk in reference to their overall displacement and distance. They seem to be in disagreement about their journey. Thomas says their overall displacement and distance are both zero, because they are back where they started. Lilian thinks their total distance and displacement are greater than zero.

Which person do you most agree with?
You are not expected to actually calculate in order to solve this problem.

Answers

Answer:

Thomas is correct that the zero displacements

Lilian is right that the distance is greater than zero.

Explanation:

In this problem we have to be clear about the difference between displacement and distance.

The displacement is a vector, that is, it has a modulation and direction, in this case we can draw a vector for the outward trip and another vector for the return trip, both will have the same magnitude, but their directions are opposite, so the resulting vector is zero.

The distance is a scalar and its value coincides with the modulus of the distance vector, in our case the distance is d for the outward journey and d for the return journey, so the total distance is 2d, which is different from zero.

The two students have some reason, but neither complete,

The displacement is zero because it is a vector and

the distance is different from zero (2d) because it is a scalar

 

Thomas is correct that the zero displacements

Lilian is right that the distance is greater than zero.

Therefore I agree with both, because each one has a 50% of the reason

A laboratory electromagnet produces a magnetic field of magnitude 1.38 T. A proton moves through this field with a speed of 5.86 times 10^6 m/s.

a. Find the magnitude of the maximum magnetic force that could be exerted on the proton.
b. What is the magnitude of the maximum acceleration of the proton?
c. Would the field exert the same magnetic force on an electron moving through the field with the same speed? (Assume that the electron is moving in the direction as the proton.)

1. Yes
2. No

Answers

.Answer;

Using Fmax=qVB

F=(1.6*10^-19 C)(5.860*10^6 m/s)(1.38 T)

ANS=1.29*10^-12 N

2. Using Amax=Fmax/ m

Amax =(1.29*10^-12 N) / (1.67*10^-27 kg)

ANS=1.93*10^15 m/s^2*

3. No, the acceleration wouldn't be the same. Since The magnitude of the electron is equal to that of the proton, but the direction would be in the opposite direction and also Since an electron has a smaller mass than a proton

"Determine the magnitude of the net force of gravity acting on the Moon during an eclipse when it is directly between Earth and the Sun."

Answers

Answer:

Net force = 2.3686 × 10^(20) N

Explanation:

To solve this, we have to find the force of the earth acting on the moon and the force of the sun acting on the moon and find the difference.

Now, from standards;

Mass of earth;M_e = 5.98 × 10^(24) kg

Mass of moon;M_m = 7.36 × 10^(22) kg

Mass of sun;M_s = 1.99 × 10^(30) kg

Distance between the sun and earth;d_se = 1.5 × 10^(11) m

Distance between moon and earth;d_em = 3.84 × 10^(8) m

Distance between sun and moon;d_sm = (1.5 × 10^(11)) - (3.84 × 10^(8)) = 1496.96 × 10^(8) m

Gravitational constant;G = 6.67 × 10^(-11) Nm²/kg²

Now formula for gravitational force between the earth and the moon is;

F_em = (G × M_e × M_m)/(d_em)²

Plugging in relevant values, we have;

F_em = (6.67 × 10^(-11) × 5.98 × 10^(24) × 7.36 × 10^(22))/(3.84 × 10^(8))²

F_em = 1.9909 × 10^(20) N

Similarly, formula for gravitational force between the sun and moon is;

F_sm = (G × M_s × M_m)/(d_sm)²

Plugging in relevant values, we have;

F_se = (6.67 × 10^(-11) × 1.99 × 10^(30) ×

7.36 × 10^(22))/(1496.96 × 10^(8))²

F_se = 4.3595 × 10^(20) N

Thus, net force = F_se - F_em

Net force = (4.3595 × 10^(20) N) - (1.9909 × 10^(20) N) = 2.3686 × 10^(20) N

A cylindrical container with a cross-sectional area of 66.2 cm2 holds a fluid of density 856 kg/m3 . At the bottom of the container the pressure is 119 kPa . Assume Pat = 101 kPa

A) What is the depth of the fuild?

B) Find the pressure at the bottom of the container after an additional 2.35×10−3 m3 of this fluid is added to the container. Assume that no fluid spills out of the container.

Answers

Answer:

A. h = 2.15 m

B. Pb' = 122 KPa

Explanation:

The computation is shown below:

a)  Let us assume the depth be h

As we know that

[tex]Pb - Pat = d \times g \times h \\\\ ( 119 - 101) \times 10^3 = 856 \times 9.8 \times h[/tex]

After solving this,  

h = 2.15 m

Therefore the depth of the fluid is 2.15 m

b)

Given that  

height of the extra fluid is

[tex]h' = \frac{2.35 \times 10^{-3}}{ area} \\\\ h' = \frac{2.35 \times 10^{-3}} { 66.2 \times 10^{-4}}[/tex]

h' = 0.355 m

Now let us assume the pressure at the bottom is Pb'

so, the equation would be

[tex]Pb' - Pat = d \times g \times (h + h')\\\\Pb' = 856 \times 9.8 \times ( 2.15 + 0.355) + 101000[/tex]

Pb' = 122 KPa

(A)  The depth of the fluid is 2.14 m.

(B)  The new pressure at the bottom of container is 121972 Pa.

Given data:

The cross-sectional area of the container is, [tex]A =66.2 \;\rm cm^{2}=66.2 \times 10^{-4} \;\rm m^{2}[/tex].

The density of fluid is, [tex]\rho = 856 \;\rm kg/m^{3}[/tex].

The container pressure at bottom is, [tex]P=119 \;\rm kPa=119 \times 10^{3} \;\rm Pa[/tex].

The atmospheric pressure is, [tex]P_{at}=101 \;\rm kPa=101 \times 10^{3}\;\rm Pa[/tex].

(A)

The given problem is based on the net pressure on the container, which is equal to the difference between the pressure at the bottom and the atmospheric pressure. Then the expression is,

[tex]P_{net} = P-P_{at}\\\\\rho \times g \times h= P-P_{at}[/tex]

Here, h is the depth of fluid.

Solving as,

[tex]856\times 9.8 \times h= (119-101) \times 10^{3}\\\\h=\dfrac{ (119-101) \times 10^{3}}{856\times 9.8}\\\\h= 2.14 \;\rm m[/tex]

Thus, the depth of the fluid is 2.14 m.

(B)

For an additional volume of [tex]2.35 \times 10^{-3} \;\rm m^{3}[/tex] to the liquid, the new depth is,

[tex]V=A \times h'\\\\h'=\dfrac{2.35 \times 10^{-3}}{66.2 \times 10^{-4}}\\\\h'=0.36 \;\rm m[/tex]

Now, calculate the new pressure at the bottom of the container as,

[tex]P'-P_{at}= \rho \times g \times (h+h')\\\\\P'-(101 \times 10^{3})= 856 \times 9.8 \times (2.14+0.36)\\\\P'=121972 \;\rm Pa[/tex]

Thus, we can conclude that the new pressure at the bottom of container is 121972 Pa.

Learn more about the atmospheric pressure here:

https://brainly.com/question/13323291

The linear density rho in a rod 3 m long is 8/ x + 1 kg/m, where x is measured in meters from one end of the rod. Find the average density rhoave of the rod.

Answers

Answer:

The average density of the rod is 1.605 kg/m.

Explanation:

The average density of the rod is given by:

[tex] \rho = \frac{m}{l} [/tex]    

To find the average density we need to integrate the linear density from x₁ = 0 to x₂ = 3, as follows:

[tex] \int_{0}^{3} \frac{8}{3(x + 1)}dx [/tex]

[tex] \rho = \frac{8}{3} \int_{0}^{3} \frac{1}{(x + 1)}dx [/tex]   (1)

Using u = x+1  →  du = dx  → u₁= x₁+1 = 0+1 = 1 and u₂ = x₂+1 = 3+1 = 4

By entering the values above into (1), we have:

[tex] \rho = \frac{8}{3} \int_{0}^{3} \frac{1}{u}du [/tex]

[tex]\rho = \frac{8}{3}*log(u)|_{1}^{4} = \frac{8}{3}[log(4) - log(1)] = 1.605 kg/m[/tex]

Therefore, the average density of the rod is 1.605 kg/m.  

       

I hope it helps you!    

The average density of the rod is  [tex]1.605 \;\rm kg/m^{3}[/tex].

Given data:

The length of rod is, L = 3 m.

The linear density of rod is, [tex]\rho=\dfrac{8}{x+1} \;\rm kg/m[/tex].

To find the average density we need to integrate the linear density from x₁ = 0 to x₂ = 3,  The expression for the average density is given as,

[tex]\rho' = \int\limits^3_0 { \rho} \, dx\\\\\\\rho' = \int\limits^3_0 { \dfrac{m}{L}} \, dx\\\\\\\rho' = \int\limits^3_0 {\dfrac{8}{3(x+1)}} \, dx[/tex]............................................................(1)

Using u = x+1  

du = dx

u₁= x₁+1 = 0+1 = 1

and

u₂ = x₂+1 = 3+1 = 4

By entering the values above into (1), we have:

[tex]\rho' =\dfrac{8}{3} \int\limits^3_0 {\dfrac{1}{u}} \, du\\\\\\\rho' =\dfrac{8}{3} \times [log(u)]^{4}_{1}\\\\\\\rho' =\dfrac{8}{3} \times [log(4)-log(1)]\\\\\\\rho' =1.605 \;\rm kg/m^{3}[/tex]

Thus, we can conclude that the average density of the rod is  [tex]1.605 \;\rm kg/m^{3}[/tex].

Learn more about the average density here:

https://brainly.com/question/1371999

hat a 15 kg body is pulled along a horizontal fictional table by a force of 4N what is the acceleration of the body ​

Answers

Answer:

Acceleration of the body is:

[tex]a=0.27\,\,m/s^2[/tex]

Explanation:

Use Newton's second Law to solve for the acceleration:

[tex]F=m\,\,a\\a=\frac{F}{m} \\a=\frac{4\,N}{15\,\,kg} \\a=0.27\,\,m/s^2[/tex]

We can reasonably model a 75 W incandescent light bulb as a sphere 6.0 cm in diameter. Typically only about 5% of the energy goes to visible light; the rest goes largely to non-visible infrared radiation. (a) What is the visible light intensity at the surface of the bulb

Answers

Answer:

Visible light intensity at the surface of the bulb (I) = 331 W/m²

Explanation:

Given:

Energy = 75 W

Radius = 6 /2 = 3 cm = 3 × 10⁻² m

Energy goes to visible light = 5% = 0.05

Find:

Visible light intensity at the surface of the bulb (I)

Computation:

Visible light intensity at the surface of the bulb (I) = P / 4A

Visible light intensity at the surface of the bulb (I) = (0.05)(75) / 4π(3 × 10⁻²)²

Visible light intensity at the surface of the bulb (I) = 3.75 / 4π(9 × 10⁻⁴)

Visible light intensity at the surface of the bulb (I) = 331 W/m²

Two waves are traveling in the same direction along a stretched string. The waves are 45.0° out of phase. Each wave has an amplitude of 7.00 cm. Find the amplitude of the resultant wave.

Answers

Answer:

The amplitude of the resultant wave is 12.93 cm.

Explanation:

The amplitude of resultant of two waves, y₁ and y₂, is given as;

Y = y₁ + y₂

Let y₁ = A sin(kx - ωt)

Since the wave is out phase by φ, y₂ is given as;

y₂ = A sin(kx - ωt + φ)

Y = y₁ + y₂ = 2A Cos (φ / 2)sin(kx - ωt + φ/2 )

Given;

phase difference, φ = 45°

Amplitude, A = 7.00 cm

Y = 2(7) Cos (45 /2) sin(kx - ωt + 22.5° )

Y = 12.93 cm

Therefore, the amplitude of the resultant wave is 12.93 cm.

Q9 A physics book slides off a horizontal tabletop with a speed of 1.10 m/s. It strikes the floor in 0.350s. ignore air resistance. Find (a) the height of the tabletop above the floor; (b) the horizontal distance from the edge of the table to the point where the book strikes the floor; (c) the horizontal and vertical components of the book's velocity, and the magnitude and direction of its velocity, just before the book reaches the floor.

Answers

Answer:

(a) 0.613 m

(b) 0.385 m

(c) vₓ = 1.10 m/s, vᵧ = 3.50 m/s

v = 3.68 m/s², θ = 72.6° below the horizontal

Explanation:

(a)  Take down to be positive.

Given in the y direction:

v₀ = 0 m/s

a = 10 m/s²

t = 0.350 s

Find: Δy

Δy = v₀ t + ½ at²

Δy = (0 m/s) (0.350 s) + ½ (10 m/s²) (0.350 s)²

Δy = 0.613 m

(b) Given in the x direction:

v₀ = 1.10 m/s

a = 0 m/s²

t = 0.350 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (1.10 m/s) (0.350 s) + ½ (0 m/s²) (0.350 s)²

Δx = 0.385 m

(c) Find: vₓ and vᵧ

vₓ = aₓt + v₀ₓ

vₓ = (0 m/s²) (0.350 s) + 1.10 m/s

vₓ = 1.10 m/s

vᵧ = aᵧt + v₀ᵧ

vᵧ = (10 m/s²) (0.350 s) + 0 m/s

vᵧ = 3.50 m/s

The magnitude is:

v² = vₓ² + vᵧ²

v = 3.68 m/s²

The direction is:

θ = atan(vᵧ / vₓ)

θ = 72.6° below the horizontal

How much heat is required to convert 5.0 kg of ice from a temperature of - 20 0C to water at a temperature of 205 0F

Answers

Answer:

Explanation:

To convert from °C to °F , the formula is

( F-32 ) / 9 = C / 5

F is reading fahrenheit scale and C is in centigrade scale .

F = 205 , C = ?

(205 - 32) / 9 = C / 5

C = 96°C approx .

Let us calculate the heat required .

Total heat required = heat required to heat up the ice at - 20 °C  to 0°C  + heat required to melt the ice + heat required to heat up the water at  0°C to

96°C.

=  5 x 2.04 x (20-0) +  5 x 336 + 5 x ( 96-0 ) x 4.2  kJ .

= 204 + 1680 + 2016

= 3900 kJ .

A charge of 15 is moving with velocity of 6.2 x17 which makes an angle of 48 degrees with respect to the magnetic field. If the force on the particle is 4838 N, find the magnitude of the magnetic field.
a. 06.0T.
b. 08.0T.
c. 07.0T.
d. 05.0 T.

Answers

Complete question:

A charge of 15C is moving with velocity of 6.2 x 10³ m/s which makes an angle of 48 degrees with respect to the magnetic field. If the force on the particle is 4838 N, find the magnitude of the magnetic field.

a. 0.06 T

b. 0.08 T

c. 0.07 T

d. 0.05 T

Answer:

The magnitude of the magnetic field is 0.07 T.

Explanation:

Given;

magnitude of the charge, q = 15C

velocity of the charge, v = 6.2 x 10³ m/s

angle between the charge and the magnetic field, θ = 48°

the force on the particle, F = 4838 N

The magnitude of the magnetic field can be calculated by applying Lorentz force formula;

F = qvBsinθ

where;

B is the magnitude of the magnetic field

B = F / vqsinθ

B = (4838) / (6.2 x 10³ x 15 x sin48)

B = 0.07 T

Therefore, the magnitude of the magnetic field is 0.07 T.

PLEASE HELP FAST The object distance for a convex lens is 15.0 cm, and the image distance is 5.0 cm. The height of the object is 9.0 cm. What is the height of the image?

Answers

Answer:

The image height is 3.0 cm

Explanation:

Given;

object distance, [tex]d_o[/tex] = 15.0 cm

image distance, [tex]d_i[/tex] = 5.0 cm

height of the object, [tex]h_o[/tex] = 9.0 cm

height of the image, [tex]h_i[/tex] = ?

Apply lens equation;

[tex]\frac{h_i}{h_o} = -\frac{d_i}{d_o}\\\\ h_i = h_o(-\frac{d_i}{d_o})\\\\h_i = -9(\frac{5}{15} )\\\\h_i = -3 \ cm[/tex]

Therefore, the image height is 3.0 cm. The negative values for image height indicate that the image is an inverted image.

If you wanted to make your own lenses for a telescope, what features of a lens do you think would affect the images that you can see

Answers

Answer:

Therefore the characteristics to be found are:

* the focal length must be large and the focal length of the eyepiece must be small

* The diameter of the objective lens should be as large as possible, to be able to collect small without need from light

* The system must be configured to the far sight tip,

Explanation:

The length of the telescope is

         L = f_ocular + f_objetive

the magnification of the telescope is

         m = - f_objective / f_ocular

These are the two equations that describe the behavior of the telescope. Therefore the characteristics to be found are:

* the focal length must be large and the focal length of the eyepiece must be small

* The diameter of the objective lens should be as large as possible, to be able to collect small without need from light

* The system must be configured to the far sight tip,

A plastic dowel has a Young's Modulus of 1.50 ✕ 1010 N/m2. Assume the dowel will break if more than 1.50 ✕ 108 N/m2 is exerted.
(a) What is the maximum force (in kN) that can be applied to the dowel assuming a diameter of 2.40 cm?
______Kn
(b) If a force of this magnitude is applied compressively, by how much (in mm) does the 26.0 cm long dowel shorten? (Enter the magnitude.)
mm

Answers

Answer:

a

   [tex]F = 67867.2 \ N[/tex]

b

  [tex]\Delta L = 2.6 \ mm[/tex]

Explanation:

From the question we are told that

      The Young modulus is  [tex]Y = 1.50 *10^{10} \ N/m^2[/tex]

      The stress is  [tex]\sigma = 1.50 *10^{8} \ N/m^2[/tex]

      The  diameter is  [tex]d = 2.40 \ cm = 0.024 \ m[/tex]

The radius is mathematically represented as

       [tex]r =\frac{d}{2} = \frac{0.024}{2} = 0.012 \ m[/tex]

The cross-sectional area is  mathematically evaluated as

        [tex]A = \pi r^2[/tex]

         [tex]A = 3.142 * (0.012)^2[/tex]

        [tex]A = 0.000452\ m^2[/tex]

Generally the stress is mathematically represented as

        [tex]\sigma = \frac{F}{A}[/tex]

=>     [tex]F = \sigma * A[/tex]

=>    [tex]F = 1.50 *10^{8} * 0.000452[/tex]

=>    [tex]F = 67867.2 \ N[/tex]

Considering part b

      The length is given as [tex]L = 26.0 \ cm = 0.26 \ m[/tex]

Generally Young modulus is mathematically represented as

           [tex]E = \frac{ \sigma}{ strain }[/tex]

Here strain is mathematically represented as

         [tex]strain = \frac{ \Delta L }{L}[/tex]

So    

       [tex]E = \frac{ \sigma}{\frac{\Delta L }{L} }[/tex]

        [tex]E = \frac{\sigma }{1} * \frac{ L}{\Delta L }[/tex]

=>     [tex]\Delta L = \frac{\sigma * L }{E}[/tex]

substituting values

       [tex]\Delta L = \frac{ 1.50*10^{8} * 0.26 }{ 1.50 *10^{10 }}[/tex]

       [tex]\Delta L = 0.0026[/tex]

Converting to mm

      [tex]\Delta L = 0.0026 *1000[/tex]

      [tex]\Delta L = 2.6 \ mm[/tex]

A 1.25-kg ball begins rolling from rest with constant angular acceleration down a hill. If it takes 3.60 s for it to make the first complete revolution, how long will it take to make the next complete revolution?

Answers

Answer:

The time taken is  [tex]\Delta t = 1.5 \ s[/tex]

Explanation:

From the question we are told that

   The mass of the ball is  [tex]m = 1.25 \ kg[/tex]

    The time taken to make the first complete revolution is  t= 3.60 s

    The displacement of the first complete revolution is  [tex]\theta = 1 rev = 2 \pi \ radian[/tex]

Generally the displacement for one  complete revolution is mathematically represented as

       [tex]\theta = w_i t + \frac{1}{2} * \alpha * t^2[/tex]

Now given that the stone started from rest [tex]w_i = 0 \ rad / s[/tex]

     [tex]2 \pi =0 + 0.5* \alpha *(3.60)^2[/tex]

     [tex]\alpha = 0.9698 \ s[/tex]

Now the displacement for two  complete revolution is

         [tex]\theta_2 = 2 * 2\pi[/tex]

         [tex]\theta_2 = 4\pi[/tex]

Generally the displacement for two complete revolution is mathematically represented as  

     [tex]4 \pi = 0 + 0.5 * 0.9698 * t^2[/tex]

=>   [tex]t^2 = 25.9187[/tex]

=>   [tex]t= 5.1 \ s[/tex]

So

 The  time taken to complete the next oscillation is mathematically evaluated as

     [tex]\Delta t = t_2 - t[/tex]

substituting values

      [tex]\Delta t = 5.1 - 3.60[/tex]

     [tex]\Delta t = 1.5 \ s[/tex]

           

 

The time for the ball to complete the next revolution is 1.5 s.

The given parameters;

mass of the ball, m = 1.25 kgtime of motion, t = 3.6 sone complete revolution, θ = 2π

The constant angular acceleration of the ball is calculated as follows;

[tex]\theta = \omega t \ + \ \frac{1}{2} \alpha t^2\\\\2\pi = 0 \ + \ 0.5(3.6)^2 \alpha\\\\2\pi = 6.48 \alpha \\\\\alpha = \frac{2 \pi }{6.48} \\\\\alpha = 0.97 \ rad/s^2[/tex]

The time to complete the next revolution is calculated as follows;

[tex]4\pi = 0 + \frac{1}{2} (0.97)t^2\\\\8\pi = 0.97t^2\\\\t^2 = \frac{8\pi }{0.97} \\\\t^2 = 25.91\\\\t = \sqrt{ 25.91} \\\\t = 5.1 \ s[/tex]

[tex]\Delta t = 5.1 \ s \ - \ 3.6 \ s \\\\\Delta t = 1.5 \ s[/tex]

Thus, the time for the ball to complete the next revolution is 1.5 s.

Learn more here:https://brainly.com/question/20738528

What is temperature?
O A. The force exerted on an area
B. A measure of mass per unit volume
O C. The net energy transferred between two objects
OD. A measure of the movement of atoms or molecules within an
object​

Answers

Answer:

The net energy transferred between two objects

Explanation:

The physical property of matter that expresses hot or cold is called temperature. It demonstrates the thermal energy. A thermometer is used to measure temperature. It defines the rate to which the chemical reaction occurs. It tells about the thermal radiation emitted from an object.

The correct option that defines temperature is option C.

Answer:

A measure of the movement of atoms or molecules within an object

Explanation:

Process of elimination

A solenoid is designed to produce a magnetic field of 3.50×10^−2 T at its center. It has a radius of 1.80 cm and a length of 46.0 cm , and the wire can carry a maximum current of 13.0 A.

Required:
a. What minimum number of turns per unit length must the solenoid have?
b. What total length of wire is required?

Answers

Answer:

a. 2143 turns/m

b. 111.5 m

Explanation:

a. The minimum number of turns per unit length (N/L) can be found using the following equation:

[tex] B = \frac{\mu_{0}NI}{L} [/tex]

[tex] \frac{N}{L} = \frac{B}{\mu_{0}I} = \frac{3.50 \cdot 10^{-2} T}{4\pi \cdot 10^{-7} Tm/A*13.0 A} = 2143 turns/m [/tex]

Hence, the minimum number of turns per unit length is 2143 turns/m.

b. The total length of wire is the following:

[tex] N = 2143 turns/m*L = 2143 turns/m*46.0 \cdot 10^{-2} m = 986 turns [/tex]

Since each turn has length 2πr of wire, the total length is:

[tex] L_{T} = N*2\pi r = 986 turn*2*\pi*1.80 \cdot 10^{-2} m = 111.5 m [/tex]

Therefore, the total length of wire required is 111.5 m.

I hope it helps you!

A 384 Hz tuning fork produces standing waves with a wavelength of 0.90 m inside a resonance tube. The speed of sound at experimental conditions is

Answers

Answer:

v = 345.6m/s

Explanation:

v = 384 x 0.9 = 345.6

v = 345.6m/s

A student is hammering a nail into a board. Where should he hold the hammer and why?

Answers

Answer:

At the end of the handle farthest from the head of the hammer.

Explanation:

The force of the hammer is greatest the longer the radius is on a which would be the length of the handle. Simple mechanical advantage.

The magnetic field of a plane-polarized electromagnetic wave moving in the z-direction is given by in SI units. What is the frequency of the wave

Answers

Complete Question    

The magnetic field of a plane-polarized electromagnetic wave moving in the z-direction is given by

[tex]B=1.2* 10^{-6} sin [2\pi[(\frac{z}{240} ) - ( \frac{t * 10^7}{8} ) ] ][/tex]    in SI units.

Answer:

The  value  is  [tex]f = 1.98918*10^{5}\ Hz[/tex]

Explanation:

From the question we are told that

   The magnetic field is    [tex]B=1.2* 10^{-6} sin [2\pi[(\frac{z}{240} ) - ( \frac{t * 10^7}{8} ) ] ][/tex]

 This above  equation can be modeled as

       [tex]B=1.2* 10^{-6} sin [2\pi[(\frac{z}{240} ) - ( \frac{t * 10^7}{8} ) ] ] \equiv A sin ( kz -wt )[/tex]

So  

       [tex]w = \frac{10^7}{8}[/tex]

Generally the frequency is mathematically represented as

       [tex]f = \frac{w}{2 \pi}[/tex]

=>    [tex]f = \frac{ \frac{10^7}{8} }{2 \pi}[/tex]

=>    [tex]f = 1.98918*10^{5}\ Hz[/tex]

CAN SOMEONE HELP ME PLEASE ITS INTEGRATED SCIENCE AND I AM STUCK

Answers

Answer:

[tex]\huge \boxed{\mathrm{Option \ D}}[/tex]

Explanation:

Two forces are acting on the object.

Subtracting 2 N from both forces.

2 N → Object ← 5 N

- 2 N                 - 2N

0 N → Object ← 3 N

The force 3 N is pushing the object to the left side.

The mass of the object is 10 kg.

Applying formula for acceleration (Newton’s Second Law of Motion).

a = F/m

a = 3/10

a = 0.3

A battery establishes a voltage V on a parallel-plate capacitor. After the battery is disconnected, the distance between the plates is doubled without loss of charge. Accordingly:_____.
a. stay same
b. increases
c. decreases
d. the capacitance decreases and the voltage between the plates increases.

Answers

Answer:

d.

Explanation:

Since, the capacitance( decreases )

therefore voltage between the plates(increases ).

Hence, option d is correct.

C =εA/d.

d is doubled, therefore  C decrease ( inverse relation).

D) The capacitance decreases and the voltage between the plates increases.

Battery

A battery establishes a voltage V on a parallel-plate capacitor. After the battery is disconnected, the distance between the plates is doubled without loss of charge. Accordingly, the capacitance decreases and the voltage between the plates increases.

The capacitance - (decreases)

The voltage between the plates- (increases ).

Thus, the correct answer is D.

Learn more about "Battery":

https://brainly.com/question/15648781?referrer=searchResults

An archer practicing with an arrow bow shoots an arrow straight up two times. The first time the initial speed is vi and second

time he increases the initial sped to 4v. How would you compare the maximum height in the second trial to that in the first trial?

Answers

Answer:

The maximum height reached in the second trial is 16times the maximum height reached in the first trial.

Explanation:

The following data were obtained from the question:

First trial

Initial speed (u) = v

Final speed (v) = 0

Second trial

Initial speed (u) = 4v

Final speed (v) = 0

Next, we shall obtain the expression for the maximum height reached in each case.

This is illustrated below:

First trial:

Initial speed (u) = v

Final speed (v) = 0

Acceleration due to gravity (g) = 9.8 m/s²

Height (h₁) =.?

v² = u² – 2gh₁ (going against gravity)

0 = (v)² – 2 × 9.8 × h₁

0 = v² – 19.6 × h₁

Rearrange

19.6 × h₁ = v²

Divide both side by 19.6

h₁ = v²/19.6

Second trial

Initial speed (u) = 4v

Final speed (v) = 0

Acceleration due to gravity (g) = 9.8 m/s²

Height (h₂) =.?

v² = u² – 2gh₂ (going against gravity)

0 = (4v)² – 2 × 9.8 × h₂

0 = 16v² – 19.6 × h₂

Rearrange

19.6 × h₂ =16v²

Divide both side by 19.6

h₂ = 16v²/19.6

Now, we shall determine the ratio of the maximum height reached in the second trial to that of the first trial.

This is illustrated below:

Second trial:

h₂ = 16v²/19.6

First trial:

h₁ = v²/19.6

Second trial : First trial

h₂ : h₁

h₂ / h₁ = 16v²/19.6 ÷ v²/19.6

h₂ / h₁ = 16v²/19.6 × 19.6/v²

h₂ / h₁ = 16

h₂ = 16 × h₁

From the above illustrations, we can see that the maximum height reached in the second trial is 16times the maximum height reached in the first trial.

A roller coaster starts from rest at its highest point and then descends on its (frictionless) track. Its speed is 26 m/s when it reaches ground level. What was its speed when its height was half that of its starting point?

Answers

Answer:

The velocity is  [tex]v_h = 19.2 \ m/s[/tex]

Explanation:

From the question we are told that

   The speed of the roller coaster at ground level  is [tex]v = 26 \ m/s[/tex]

 

Generally we can define the roller coaster speed at ground level using the an equation of motion as

     [tex]v^2 = u^2 + 2 g s[/tex]

 u is  zero given that the roller coaster started from rest

      So

            [tex]26^2 = 0 + 2 * g * s[/tex]

So  

           [tex]s = \frac{26^2}{ 2 * g }[/tex]

=>       [tex]s = 37.6 \ m[/tex]

Now the displacement half way is mathematically represented as

       

    [tex]s_{h} = \frac{37.6}{2}[/tex]

     [tex]s_{h} = 18.8 \ m[/tex]

So

      [tex]v_h ^2 = u^2 + 2 * g * s_h[/tex]

Where  [tex]v_h[/tex] is the velocity at the half way point

=>  [tex]v_h = \sqrt{ 0 + 2 * 9.8 * 18.8 }[/tex]

=>   [tex]v_h = 19.2 \ m/s[/tex]

Does the moon light originate from the moon only

Answers

Answer:

No

Explanation:

Moon has no light of its own. It just shines because its surface reflects light from the sun and that's what we see.

:-)

The block moves up an incline with constant speed. What is the total work WtotalWtotalW_total done on the block by all forces as the block moves a distance LLL

Answers

Answer:

External force    W₁ = F L

Friction force    W₂ = - fr L

weight component   W₃ = - mg sin θ L

Y Axis   Force      W=0

Explanation:

When the block rises up the plane with constant velocity, it implies that the sum of the forces is zero.

For these exercises it is indicated to create a reference system with the x axis parallel to the plane and the y axis perpendicular

let's write the equations of translational equilibrium in given exercise

X axis

        F - fr -Wₓ = 0

        F = fr + Wₓ

the components of the weight can be found using trigonometry

         Wₓ = W sin θ

         [tex]W_{y}[/tex] = W cos θ

let's look for the work of these three forces

          W = F x cos θ

External force

          W₁ = F L

since the displacement and the force have the same direction

Friction force

          W₂ = - fr L

since the friction force is in the opposite direction to the displacement

For the weight component

          W₃ = - mg sin θ L

because the weight component is contrary to displacement

Y Axis  

          N- Wy = 0

in this case the forces are perpendicular to the displacement, the angle is 90º and the cosine 90 = 0

therefore work is worth zero

Matter's resistance to a change in motion is called

Answers

Answer:

Inertia! I hope this helps!

Answer:

inertia

Explanation

Inertia.

Other Questions
Chloe wants to wrap a present in a box for Sarah. The top and bottom of the box is 8 in. by 3 in., the sides are both 3 in by 2 in. and the front and back are 8 in by 2 in. How much wrappingpaper will Chloe need to wrap the present? A four-cylinder four-stroke engine is modelled using the air standard Otto cycle (two engine revolutions per cycle). Given the conditions at state 1, total volume (V1) of each cylinder, compression ratio (r), rate of heat addition (Q), and engine speed in RPM, determine the efficiency and other values listed below. The gas constant for air is R =0.287 kJ/kg-K.T1 = 300 KP1 = 100 kPaV1 = 500 cm^3r = 10Q = 60 kWSpeed = 5600 RPMRequired:a. Determine the total mass (kg) of air in the engine.b. Determine the specific internal energy (kJ/kg) at state 1.c. Determine the specific volume (m^3/kg) at state 1.d. Determine the relative specific volume at state 1. Predict the sign and calculate S for a reaction. Close Problem Consider the reaction H2CO(g) + O2(g)CO2(g) + H2O(l) Based upon the stoichiometry of the reaction the sign of Srxn should be _________ . Using standard thermodynamic data (in the Chemistry References), calculate Srxn at 25C. Srxn = J/Kmol Wat is the meaning of this in ENGLISH Horrible HW Also say which language Pls help ASAP Academic sources should be from a primary source be from a secondary source have references to both primary and secondary sources have references to neither primary nor secondary sources Which sentence uses the modifier correctly?A The vacationers saw many jellyfish snorkeling.B They listened to the songs whales make at Renata's house.C While racing for the train, the hat flew off myhead.D After revising the essay, I received a good grade. 5) What are the states annexed by Doctrine of lapse? I think u should make____ a sandwich. A researcher wants to determine the impact of soil type on the growth of a certain type of plant. She grows three plants in each of four different types of soil and measures the growth in inches for each plant after one month resulting in the data below.Soil 1 Soil 2 Soil 3 Soil 412.6 12.2 12.2 11.112.6 12 10.6 11.714.3 13 9.1 9.61. What null hypothesis is the researcher testing if she runs an ANOVA with this data?a.The mean growth of the plant in each type of soil is the same.b. One type of soil has a higher mean growth for the plant than the others. c. The variability in growth of the plant in each type of soil is the same.d. Oil 3 provides a lower mean growth for the plant than the other types of soil.e. The mean growth of the plant is different in each type of soil.2. What is the SStrt for the ANOVA? Give your answer to at least three decimal places. 3. What is DFerr for the ANOVA? 4. What is the value of the F statistic for the ANOVA? Give your answer to at least three decimal places. 5. Using a 0.05 level of significance, what conclusion should the researcher reach?a. There is not enough evidence to reject the claim that the mean growth of the plant is the same in each type of soil.b. Soil 1 has a higher mean growth for the plant than the other types of soil. c. The mean growth of the plant is not the same for all soil types . d. Soil 3 has a lower mean growth for the plant than the other types of soil. Find the area of the shaded regions: high reward low risk claim ur prize and help with math Identify if there exist argument. Then, separate the argument into premises and conclusion.From a letter to the editor: the idea of a free press in America today is joke. A small group of people, the nations advertisers, control the media more effectively than if they can dictate everything from programming to news report content. Politicians as well as editors shiver in their boots at the thought of such a boycott. This situation is intolerable and ought to be changed. I suggest we all listen to National Public Radio and public television. TB MC Qu. 7-137 Farris Corporation, which has ... Farris Corporation, which has only one product, has provided the following data concerning its most recent month of operations: Selling price $ 144 Units in beginning inventory 0 Units produced 9,350 Units sold 8,950 Units in ending inventory 400 Variable costs per unit: Direct materials $ 26 Direct labor $ 68 Variable manufacturing overhead $ 14 Variable selling and administrative expense $ 18 Fixed costs: Fixed manufacturing overhead $ 140,250 Fixed selling and administrative expense $ 9,600 What is the net operating income (loss) for the month under variable costing Which rule describes this transformation? (Zoom in to see it clearly) What meaning is revealed through the use of an analogy in this cartoon? Inside the wall of a house, an L-shaped section of hot-water pipe consists of three parts: a straight, horizontal piece 28.0 cm long, an elbow, and a straight vertical piece = 159 cm long. A stud and a second-story floorboard hold the ends of this section of copper pipe stationary. Find the magnitude and direction of the displacement of the pipe elbow when the water flow is turned on, raising the temperature of the pipe from 18.0C to 40.2C. (The coefficient of linear expansion of copper is Which statement explains how some Zhou rulers used the Mandate of Heaven to misuse their power? A. According to the Mandate of Heaven, kings were considered godlike beings, so they could do as they pleased. B. According to the Mandate of Heaven, a ruler could not maintain law and order without punishing people. C. According to the Mandate of Heaven, the people were required to worship their kings. D. According to the Mandate of Heaven, a king was the highest authority and only his son could succeed him. E. According to the Mandate of Heaven, the people had the right to overthrow an inefficient king. Profesora:Eric ;Profesora: Me vaEric: Me vaEric.profesora! CmoY a ti, cmo A student decided to research primate psychology for their science project. They measured how long it took gorillas to adapt to their new habitat when moved from one zoo to another. They measured how long it took the new gorilla to interact regularly (more than 3 times per day) with the gorillas that already live there. Seven different cases were examined and the data collected. What can be said about the data? 3 divided by 6 it hard