Atom 1 has 19 electrons 19 protons and 20 neutrons atoms 2 has 19 electrons , 20 neutrons and 19 protons

The molecular formula : C₁₈H₁₈N₈

Given

62.41% C, 5.24% H, and 32.36% N

Required

The molecular formula

Solution

mol ratio

C : 62.41/12.0096 = 5.1967

H : 5.24/1.00784 = 5.1992

N : 32.36/14.0067 = 2.310

Divide by 2.310(smallest)

C : 5.1967/2.31=2.25

H : 5.1992/2.31 = 2.25

N : 2.31/2.31 = 1

Multiplied by 4

C : H : N = 9 : 9 : 4

The empirical formula : C₉H₉N₄

(C₉H₉N₄)n=346.40 g/mol

(12.0096 x 9 + 1.00784 x 9 + 14.0067 x 4)n=346.4

(108.0864+9.07056+56.0268)n=346.4

(173.184)n=346.4

n=2

The molecular formula : C₁₈H₁₈N₈

Answer:

25.8 g/dL

Explanation:

A chemist prepares a solution of aluminum sulfate by weighing out 116.0 g of aluminum sulfate into a 450. mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in g/dL of the chemist's aluminum sulfate solution. Be sure your answer has the correct number of significant digits.

Step 1: Given data

Step 2: Convert "V" to dL

We will use the following conversion factors.

450. mL × 1 L/1000 mL × 10 dL/1 L = 4.50 dL

Step 3: Calculate the concentration (C) of aluminum sulfate if g/dL

We will use the following expression.

C = m/V = 116.0 g/4.50 dL = 25.8 g/dL

Answer:

1. 0.74mol

2. 0.42mol

3. 2.125mol

4. 0.301mol

5. 4.52 × 10^23 particles

Explanation:

Number of moles (n) in a substance can be found using the formula:

mole (n) = mass/molar mass

Using this formula, the following moles are calculated:

1. Molar of Na = 23g/mol

mole = 17/23

mole = 0.74mol

2. Molar mass of Na2SO4 = 23(2) + 32 + 16(4)

= 46 + 32 + 64

= 142g/mol

Mole = 60/142

mole = 0.42mol

3. Molar mass of CO2 = 12 + 16(2)

= 12 + 32

= 44g/mol

mole = 93.5/44

mole = 2.125mol

4. Molar mass of sodium nitrate (NaNO3) = 23 + 14 + 16(3)

= 23 + 14 + 48

= 85g/mol

mole = 25.6/85

mole = 0.301mol

5. Number of particles in one mole of a substance is 6.022 × 10^23 particles. Hence, in 0.75mol of calcium hydroxide (Ca(OH)2, there will be;

0.75mol × 6.02 × 10^23

= 4.515 × 10^23

= 4.52 × 10^23 particles

Answer:

0.41 atm

Explanation:

A reaction between liquid reactants takes place at 10.0 °C in a sealed, evacuated vessel with a measured volume of 5.0 L. Measurements show that the reaction produced 13. g of sulfur hexafluoride gas. Calculate the pressure of sulfur hexafluoride gas in the reaction vessel after the reaction. You may ignore the volume of the liquid reactants. Round your answer to 2 significant digits.

Step 1: Given data

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = 10.0 °C + 273.15 = 283.2 K

Step 3: Calculate the moles (n) of SF₆

The molar mass of SF₆ is 146.06 g/mol.

13. g × 1 mol/146.06 g = 0.089 mol

Step 4: Calculate the pressure (P) of SF₆

We will use the ideal gas equation.

P × V = n × R × T

P = n × R × T/V

P = 0.089 mol × (0.0821 atm.L/mol.K) × 283.2 K/5.0 L = 0.41 atm

Answer:

No

Explanation:

This does not mean that vinegar is insoluble totally. In fact, vinegar is soluble in water because water is a polar solvent.

For a substance to be soluble in another, it must obey the rule of solubility.

The rule states that "like dissolves like"

It implies that polar solvent will only dissolve polar solute.

Also, non-polar solvent will only dissolve non-polar solute.

Therefore, the answer is no, vinegar will dissolve in water.

Answer:

See explanation

Explanation:

The valence electrons are electrons found on the valence (outermost) shell of an atom.

When an atoms form compounds, there is an exchange of valence electrons between the atoms of one element and the atoms of another element.

Let us consider a typical example, sodium has one valence electron and chlorine has seven valence electrons. This means that chlorine needs one electron to complete its octet while sodium needs to release one electron in order to attain the octet structure.

So, sodium gives out its one electron and becomes a stable sodium ion and chlorine accepts that electron and becomes a stable chloride ion. This is how the compound sodium chloride is formed.

Answer:

24.9%

Explanation:

According to this question, mole fraction of NaCl in an aqueous solution is 0.0927. This means that the mole percent of NaCl in the solution is:

0.0927 × 100 = 9.27%

Let's assume that the solution contains water (solvent) + NaCl (solute), hence, the mole fraction of water will be;

100% - 9.27% = 90.73%

THEREFORE, it can be said that, NaCl contains 0.0927moles while H2O contains 9.073moles

N.B: mole = mass/molar mass

Given the Molar Mass

NaCl: 58.44 g/mol

H2O: 18.016 g/mol

For NaCl;

0.0927 = mass/58.44

mass = 0.0927 × 58.44

5.42g

For H2O;

9.073 = mass/18.016

mass = 9.073 × 18.016

= 16.35g

Total mass of solution = 16.35g + 5.42g = 21.77g

Mass percent of NaCl = mass of NaCl/total mass × 100

% mass of NaCl = 5.42g/21.77g × 100

= 0.249 × 100

= 24.9%

Answer:

24.9

Explanation:

Answer:

I'd say maybe Dangerous? I hope this helps

Answer:

golden is sometimes referred to as shiny and beatitful

Explanation:

Answer:

4

Explanation:

the one you ARE ON

Answer:

Explanation:

here's the answer hope it helps! :)

Answer:

(a) 1s; has one orbital

(b) 4d; has five orbitals

(c) 3p; has three orbitals

(d) n=3 has nine orbitals

Explanation:

Electrons in an atom are always in constant motion, making it hard to predict there exact position. However, the most probable locations electrons can be be found are described with the terms shells, subshells and orbitals. A shell contains subshells and orbitals are found within subshells. The shells are given names such as K, L, M, N, which correspond to the principal quantum numbers, n = 1, 2, 3, and 4 respectively. There are 4 major types of subshells that can be found in a shell. They are named as s, p, d, f. Each subshell is composed of several orbitals.

a. 1s; the s subshell has only one orbital. Therefore, the 1s subshell has one orbital

b. 4d; the d subshell has five orbitals. Therefore, the 4d subshell has five orbitals

c. 3p; the p subshell has three orbitals. Therefore, the 3d subshell has  three orbitals

d. n = 3; the shell with n = 3 has the following subshells, 3s, 3p, 3d.the number of orbitals will be 1 + 3 + 5 = 9 orbitals. Therefore, the number of orbitals in n = 3 is nine orbitals

Answer:

Explanation:

a )

H₂O₂ (aq) + 2 Fe²⁺ (aq) + 2 H⁺  = 2H20 (l) + 2 Fe³⁺(aq)

Here oxidation number  of Fe is increasing from + 2 to + 3 so it is being oxidized . Hence H₂O₂ is acting as oxidizing agent here .

b )

5 H₂O₂ (aq) + 2 MnO₄⁻¹ (aq) + 6 H⁺ (aq) → 8 H20 (l) + 2 Mn⁺² (aq) + 5O₂ (g)

In this reaction,  oxidation number of Mn is reducing from + 7 to + 2 so it is being reduced . Here H₂O₂ is acting as reducing agent .

Answer:

B

Explanation:

Answer:

Bohr placed the electrons in distinct energy levels.  Rutherford described the atom as consisting of a tiny positive mass surrounded by a cloud of negative electrons. Bohr thought that electrons orbited the nucleus in quantized orbits. Also, rutherfords was just a hypothesis while Bhor took the time to make his an experiment

Answer:

See explanation

Explanation:

Chemical reactions are also referred to as chemical change. A chemical change often leads to the formation of new substances and is not easily reversible.

A chemical reaction may be accompanied by the emission of heat and light, formation of a precipitate, evolution of gas, or a color change.

These observable physical effects may tell us weather a chemical reaction has taken place or not so we have to observe the system closely for any of these effects stated above.

Answer:

What volume of water is produced when the CO2 reacts with the excess LiOH

X = 360 mL H2O

Explanation:

CO2 (g)       + 2 LiOH(s) ⇒ Li2CO3  (aq) + H2O(l)

20.0 mol        excess                                   x g

X = 360 mL H2O

x mL H20 = 20.0 mol CO2  (1 mol H2O /1 mol CO2)(18 g H2O/1 mol H2O)

(1 mL H2O /1 g H2O)

X = 360 mL H2O

Answer:

Silver Lake Picnic Area, Or C

Explanation:

The temperature and the strength of the metallic link are the two most crucial variables that can impact how malleable a metal or alloy is.

A metal is a substance that has a shiny look when freshly processed, polished, or shattered, and conducts electricity and heat rather effectively. Generally speaking, metals are malleable and ductile.

The amount of pressure that a metal can sustain without breaking can be used to gauge its malleability. Varied metals have different degrees of malleability because of variations in their crystal structures.

The temperature of the metal and the strength of the metallic connection are the two parameters that define how malleable a metal or metal alloy will be.

Thus,  The kind of the metallic connection can have a significant impact on how easily metal atoms can rearrange themselves.

To learn more about metal, follow the link;

https://brainly.com/question/18153051

#SPJ2

Answer:

5.27 g of NaCl

Explanation:

The balanced equation for the reaction is given below:

Na₂CO₃ + CaCl₂ —> 2NaCl + CaCO₃

Next, we shall determine the mass of CaCl₂ that reacted and the mass of NaCl produced from the balanced equation. This can be obtained as follow:

Molar mass of CaCl₂ = 40 + (35.5×2)

= 40 + 71

= 111 g/mol

Mass of CaCl₂ from the balanced equation = 1 × 111 = 111 g

Molar mass of NaCl = 23 + 35.5

= 58.5 g/mol

Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g

Summary:

From the balanced equation above,

111 g of CaCl₂ reacted to produce 117 g of NaCl.

Finally, we shall determine the theoretical yield of NaCl. This can be obtained as follow:

From the balanced equation above,

111 g of CaCl₂ reacted to produce 117 g of NaCl.

Therefore, 5 g of CaCl₂ will react to produce = (5 × 117)/111 = 5.27 g of NaCl.

Thus, the theoretical yield of NaCl is 5.27 g.

Answer:

Incorrect

Explanation:

Mole ratios are derived from the coefficients in front of the number, N2O does not have a 2 in front of it, the real mole ratio would be 4/1

Answer:

Correct

Explanation:

I had the same problem and I put correct, and it was correct.

Answer:

C)Grassland biomes contain mostly grasses.

Explanation:

The main differences between a savanna biome and a grassland is that grasslands biomes contain mostly grasses.

Savanna are made up of both grasses and shrubs.

Answer:

Answer:

Reversible

Explanation:

Changes of state are physical changes in matter. Common changes of the state include melting, freezing, sublimation, deposition, condensation, and vaporization.

Answer:

Explanation:

The average kinetic energy for an ideal gas is directly proportional to the temperature. The average kinetic energy of the gas is a measure of the temperature of the gas molecule

Also, the average speed is usually proportional to the square root of temperature.

Similarly, there is a noticeable increase in K.E and speed in regard to temperature but sometimes it is not usually proportional.

However, provided that there is more temperature in Xe as compared to He, then after the mixture of both takes place at equilibrium; the temperature tends to fluctuate between (25 - 50)°C

Thus, since there is a decrease in temperature in Xe, both the average kinetic energy as well as the speed too will also decrease.

Answer:

it went under the process known as crystalization

Explanation:

am a chemist

Answer:

See explanation below

Explanation:

There are several ways to know if an acid or base is strong. One method is calculating the pH. If the pH is really low, is a strong acid, and if it's really high is a strong base.

However we do not have a pH value here.

The other method is using bronsted - lowry theory. If an acid is strong, then his conjugate base is weak. Same thing with the bases.

Now, Looking at the 4 compounds, we can say that only two of them is weak and the other two are strong compounds. Let's see:

LiOH ---> Strong. If you try to dissociate :

LiOH ------> Li⁺ + OH⁻     The Li⁺ is a weak conjugate acid.

HF -----> Weak

HF --------> H⁺ + F⁻   The Fluorine is a relatively strong conjugate base.

HCl -----> Strong

This is actually one of the strongest acid.

NH₃ ------> Weak

Now writting the Ka and Kb expressions:

Ka = [H⁺] [F⁻] / [HF]

Kb = [NH₄⁺] [OH⁻] / [NH₃]

Finally, to calculate the [OH⁻] we need to use the following expression:

Kw = [H⁻] [OH⁻]

Solving for [OH⁻] we have:

[OH⁻] = Kw / [H⁺]

Remember that the value of Kw is 1x10⁻¹⁴. So replacing:

[OH⁻] = 1x10⁻¹⁴ / 7x10⁻⁶

[OH⁻] = 1.43x10⁻⁹ M

And now, multiplying by 10¹⁰ we have:

[OH⁻] = 1.429x10⁻⁹ * 1x10¹⁰

Hope this helps

Strong acids and bases are those which completely ionized in body fluid, and weak acids and bases are those who does not completely ionized in body fluid.

Ka expression is used to differentiate between strong and weak acids.

[tex]\bold{\dfrac{[H+][F-]}{[HF]}}[/tex]

[tex]\bold{\dfrac{[NH_4^+] [OH^-]}{[NH_3]} }[/tex]

Given, [tex]\bold{ [H^+]=1\times10^-^6\; at \;25^oC}[/tex]

We know, [tex]\bold{ [H^+]\times[OH^-]=1\times10^-^6\; at \;25^oC}[/tex]

[tex]\bold{[OH^-]=\dfrac{1\times10^-^1^4}{6.2\times10^-^6} = 1.43\times10^-^9}[/tex]

Now, multiplying the value by [tex]10^1^0[/tex]

[tex]\bold{( 1.429\times10^-^9) \times 1\times10^1^0= 14.29}[/tex]

Thus, the value is 14.29.

Learn more about acid and base, here:

https://brainly.com/question/10468518

Answer:

light

Explanation:

light is plasma, which is a state of matter

Answer:

iconic bond is the answer

I hope it helps you ✌

Answer:

Explanation:

From the given information:

The accuracy depends on the internal diameter of the cylinder. The cylinder with the least internal diameter is obviously more precise.

Let's assume 1% is the error of measurement.

Then, to measure 70 mL from 10 mL cylinder

The error = [tex]10 \times \dfrac{1}{100} \times 7[/tex]

= 0.7 mL

However; for a 100 mL cylinder, the error = 1 mL

Now,

The total volume for 10 mL = (70 + 0.7) = 70.7 mL

The total volume for 100 mL = (70 + 1 ) = 71 mL

Suppose the density (d) is same for both

Then;

the mass of 10 mL = ( d × 70.7) g

the mass pf 100 mL = (d × 71) g

Thus, the mass of 100 mL is greater than that of 10 mL.

Answer:

58.61 grams

Explanation:

Taking The molecular weight of NaCl = 58.44 grams/mole

Determine how many grams of NaCl to prepare the bath solution

first we will calculate the moles of NaCl that is contained in 6L of 170 mM of NaCI solution

= ( 6 * 170 ) / 1000

= 1020 / 1000 = 1.020 moles

next

determine how many grams of NaCl

= moles of NaCl * molar mass of NaCl

= 1.020 * 58.44

= 58.61 grams