At what frequency should a 200-turn, flat coil of cross sectional area of 300 cm2 be rotated in a uniform 30-mT magnetic field to have a maximum value of the induced emf equal to 8.0 V

Answers

Answer 1

Answer:

The frequency of the coil is 7.07 Hz

Explanation:

Given;

number of turns of the coil, 200 turn

cross sectional area of the coil, A = 300 cm² = 0.03 m²

magnitude of the magnetic field, B = 30 mT = 0.03 T

Maximum value of the induced emf, E = 8 V

The maximum induced emf in the coil is given by;

E = NBAω

Where;

ω is angular frequency = 2πf

E = NBA(2πf)

f = E / 2πNBA

f = (8) / (2π x 200 x 0.03 x 0.03)

f = 7.07 Hz

Therefore, the frequency of the coil is 7.07 Hz


Related Questions

A metal sphere A of radius a is charged to potential V. What will be its potential if it is enclosed by a spherical conducting shell B of radius b and the two are connected by a wire?

Answers

Answer:

The potential will be Va/b

Explanation:

So Let sphere A charged Q to potential V.

so, V= KQ/a. ....(1

Thus, spherical shell B is connected to the sphere A by a wire, so all charge always reside on the outer surface.

therefore, potential will be ,

V ′ = KQ/b = Va/b... That is from .....(1), KQ=Va]

What is the displacement current in the capacitor if the potential difference across the capacitor is increasing at 500,000V/s?

Answers

Answer:

[tex]I=2.71\times 10^{-5}\ A[/tex]

Explanation:

A 6.0-cm-diameter parallel-plate capacitor has a 0.46 mm gap.  

What is the displacement current in the capacitor if the potential difference across the capacitor is increasing at 500,000V/s?

Let given is,

The diameter of a parallel plate capacitor is 6 cm or 0.06 m

Separation between plates, d = 0.046 mm

The potential difference across the capacitor is increasing at 500,000 V/s

We need to find the displacement current in the capacitor. Capacitance for parallel plate capacitor is given by :

[tex]C=\dfrac{A\epsilon_o}{d}\\\\C=\dfrac{\pi r^2\epsilon_o}{d}[/tex], r is radius

Let I is the displacement current. It is given by :

[tex]I=C\dfrac{dV}{dt}[/tex]

Here, [tex]\dfrac{dV}{dt}[/tex] is rate of increasing potential difference

So

[tex]I=\dfrac{\pi r^2\epsilon_o}{d}\times \dfrac{dV}{dt}\\\\I=\dfrac{\pi (0.03)^2\times 8.85\times 10^{-12}}{0.46\times 10^{-3}}\times 500000\\\\I=2.71\times 10^{-5}\ A[/tex]

So, the value of displacement current is [tex]2.71\times 10^{-5}\ A[/tex].

what is the average flow rate in of gasoline to the engine of a plane flying at 700 km/h if it averages 100.0 km/l

Answers

Answer:

1.94cm³/s

Explanation:

1L = 1000cm³

Ihr = 3600s

So

Using

Average flow rate

Fr= 1L/100Km x 700Km/1hr x 1hr/3600s x 1000cm³/ 1L

= 1.94cm³/s

The accommodation limits for a nearsighted person's eyes are 20.0 cm and 82.0 cm. When he wears his glasses, he can see faraway objects clearly. At what minimum distance is he able to see objects clearly

Answers

Answer;

26.45cm

See attached file for explanation

A satellite in geostationary orbit is used to transmit data via electromagnetic radiation. The satellite is at a height of 35,000 km above the surface of the earth, and we assume it has an isotropic power output of 1.0 kW (although, in practice, satellite antennas transmit signals that are less powerful but more directional).

Required:
a. Reception devices pick up the variation in the electric field vector of the electromagnetic wave sent out by the satellite. Given the satellite specifications listed in the problem introduction, what is the amplitude E0 of the electric field vector of the satellite broadcast as measured at the surface of the earth? Use ϵ0=8.85×10^−12C/(V⋅m) for the permittivity of space and c=3.00×10^8m/s for the speed of light.

b. Imagine that the satellite described in the problem introduction is used to transmit television signals. You have a satellite TV reciever consisting of a circular dish of radius R which focuses the electromagnetic energy incident from the satellite onto a receiver which has a surface area of 5 cm^2. How large does the radius R of the dish have to be to achieve an electric field vector amplitude of 0.1 mV/m at the receiver?

Answers

Answer:

1. 6.99x 10^-6V/m

2. 18m

Explanation:

See attached file

An electrostatic paint sprayer contains a metal sphere at an electric potential of 25.0 kV with respect to an electrically grounded object. Positively charged paint droplets are repelled away from the paint sprayer's positively charged sphere and towards the grounded object. What charge must a 0.168-mg drop of paint have so that it will arrive at the object with a speed of 18.8 m/s

Answers

Answer:

The charge is  [tex]Q = 2.177 *10^{-9} \ C[/tex]

Explanation:

From the question we are told that

     The electric potential is  [tex]V = 25.0 \ kV = 25.0 *10^{3}\ V[/tex]

     The  mass of the drop is  [tex]m = 0.168 \ m g = 0.168 *10^{-3} \ g = 0.168 *10^{-6}\ kg[/tex]

      The  speed is  [tex]v = 18.8 \ m/s[/tex]

Generally the charge on the paint drop due to the electric potential which will give it the speed stated in the question  is mathematically represented as

       [tex]Q = \frac{m v^2 }{ 2 * V }[/tex]

Substituting values

      [tex]Q = \frac{0.168 *10^{-6} (18)^2 }{ 2 * 25*10^3 }[/tex]

       [tex]Q = 2.177 *10^{-9} \ C[/tex]

A bungee cord with a spring constant of 800 StartFraction N over m EndFraction stretches 6 meters at its greatest displacement. How much elastic potential energy does the bungee cord have? The bungee cord has J of elastic potential energy.

Answers

Explanation:

EE = ½ kx²

EE = ½ (800 N/m) (6 m)²

EE = 14,400 J

Answer:

14,400 J

Explanation:

Its the answer

A homeowner purchases insulation for her attic rated at R-15. She wants the attic insulated to R-30. If the insulation she purchased is 10 cm thick, what thickness does she need to use

Answers

Answer:

she need to use 20 cm thick

Explanation:

given data

wants the attic insulated = R-30

purchased = 10 cm thick

solution

as per given we can say that

10 cm is for the R 15

but she want for R 30

so  

R 30 thickness = [tex]\frac{30}{15} \times 10[/tex]  

R 30 thickness = 20 cm

so she need to use 20 cm thick

a 1010 W radiant heater is constructed to operate at 115 V. (a) What is the current in the heater when the unit is operating?

Answers

Answer:

8.78 Amps

Explanation:

Given data:

power rating of the heater P= 1010 W

voltage of the heater V= 115 volts

current taken by the heater I= ?

We can apply the power formula to solve for the current in the heater

i.e P= IV

Making I the current subject of formula we have

I= P/V

Substituting our given data into the expression for I we have

I=1010/115= 8.78 A

Hence the current when the unit/heater is operating is 8.78 Amp

A sinusoidal sound wave moves through a medium and is described by the displacement wave function s(x, t) = 1.99 cos(15.2x − 869t) where s is in micrometers, x is in meters, and t is in seconds. (a) Find the amplitude of this wave. µm (b) Find the wavelength of this wave. cm (c) Find the speed of this wave. m/s (d) Determine the instantaneous displacement from equilibrium of the elements of the medium at the position x = 0.050 9 m at t = 2.94 ms. µm (e) Determine the maximum speed of a element's oscillatory motion. mm/s

Answers

Answer:

a)  A = 1.99 μm , b) λ = 0.4134 m , c)  v = 57.2 m / s , d)   s = - 1,946 nm ,

e)      v_max = 1,739 mm / s

Explanation:

A sound wave has the general expression

           s = s₀ sin (kx - wt)

where s is the displacement, s₀ the amplitude of the wave, k the wave vector and w the angular velocity, in this exercise the expression given is

           s = 1.99 sin (15.2 x - 869 t)

a) the amplitude of the wave is

        A = s₀

        A = 1.99 μm

b) wave spectrum is

      k = 2π /λ

in the equation k = 15.2 m⁻¹

      λ = 2π / k

      λ = 2π / 15.2

     λ = 0.4134 m

c) the speed of the wave is given by the relation

       v = λ f

angular velocity and frequency are related

       w = 2π f

        f = w / 2π

        f = 869 / 2π

        f = 138.3 Hz

   

        v = 0.4134 138.3

         v = 57.2 m / s

d) To find the instantaneous velocity, we substitute the given distance and time into the equation

       s = 1.99 sin (15.2 0.0509 - 869 2.94 10⁻³)

       s = 1.99 sin (0.77368 - 2.55486)

remember that trigonometry functions must be in radians

       s = 1.99 (-0.98895)

       s = - 1,946 nm

The negative sign indicates that it shifts to the left

e) the speed of the oscillating part is

           v = ds / dt)

           v = - s₀(-w) cos (kx -wt)

the maximum speed occurs when the cosines is 1

           v_maximo = s₀w

           v_maximum = 1.99 869

           v_maximo = 1739.31 μm / s

let's reduce to mm / s

          v_maxio = 1739.31 miuy / s (1 mm / 103 mu)

          v_max = 1,739 mm / s

a) A is = 1.99 μm , b) λ is = 0.4134 m , c) v is = 57.2 m / s , d) s is = - 1,946 nm, e) v_max is = 1,739 mm / s

Calculation of Wavelength

When A sound wave has the general expression is:

Then, s = s₀ sin (kx - wt)

Now, where s is the displacement, Then, s₀ is the amplitude of the wave, k the wave vector, and w the angular velocity, Now, in this exercise the expression given is

s is = 1.99 sin (15.2 x - 869 t)

a) When the amplitude of the wave is

A is = s₀

Thus, A = 1.99 μm

b) When the wave spectrum is

k is = 2π /λ

Now, in the equation k = 15.2 m⁻¹

Then, λ = 2π / k

After that, λ = 2π / 15.2

Thus, λ = 0.4134 m

c) When the speed of the wave is given by the relation is:

Then, v = λ f

Now, the angular velocity and frequency are related is:

w is = 2π f

Then, f = w / 2π

After that, f = 869 / 2π

Now, f = 138.3 Hz

Then, v = 0.4134 138.3

Thus, v = 57.2 m / s

d) Now, To find the instantaneous velocity, When we substitute the given distance and time into the equation

Then, s = 1.99 sin (15.2 0.0509 - 869 2.94 10⁻³)

After that, s = 1.99 sin (0.77368 - 2.55486)

Then remember that trigonometry functions must be in radians

After that, s = 1.99 (-0.98895)

Thus, s = - 1,946 nm

When The negative sign indicates that it shifts to the left

e) When the speed of the oscillating part is

Then, v = ds / dt)

Now, v = - s₀(-w) cos (kx -wt)

When the maximum speed occurs when the cosines is 1

Then, v_maximo = s₀w

After that, v_maximum = 1.99 869

v_maximo = 1739.31 μm / s

Now, let's reduce to mm / s

Then, v_maxio = 1739.31 miuy / s (1 mm / 103 mu)

Therefore, v_max = 1,739 mm / s

Finf more informmation about Wavelength here:

https://brainly.com/question/6352445

In a physics lab, light with a wavelength of 490 nm travels in air from a laser to a photocell in a time of 17.5 ns . When a slab of glass with a thickness of 0.800 m is placed in the light beam, with the beam incident along the normal to the parallel faces of the slab, it takes the light a time of 21.5 ns to travel from the laser to the photocell.What is the wavelength of the light in the glass? Use 3.00×108 m/s for the speed of light in a vacuum. Express your answer using two significant figures.

Answers

Answer:

196 nm

Explanation:

Given that

Value of wavelength, = 490 nm

Time spent in air, t(a) = 17.5 ns

Thickness of glass, th = 0.8 m

Time spent in glass, t(g) = 21.5 ns

Speed of light in a vacuum, c = 3*10^8 m/s

To start with, we find the difference between the two time spent

Time spent on glass - Time spent in air

21.5 - 17.5 = 4 ns

0.8/(c/n) - 0.8/c = 4 ns

Note, light travels with c/n speed in media that has index of refraction

(n - 1) * 0.8/c = 4 ns

n - 1 = (4 ns * c) / 0.8

n - 1 = (4*10^-9 * 3*10^8) / 0.8

n - 1 = 1.2/0.8

n - 1 = 1.5

n = 1.5 + 1

n = 2.5

As a result, the wavelength of light in a medium with index of refraction would then be

490 / 2.5 = 196 nm

Therefore, our answer is 196 nm

3. El tambor de una lavadora que gira a 3 000 revoluciones por minuto (rpm) se acelera uniformemente hasta que alcanza las 6 000 rpm, completando un total de 12 revoluciones.

d. Determina la aceleración tangencial, centrípeta y la total en m.s-2 cuando el tambor a alcanzado los 60000 rpm

e. Explica lo que ocurre con la magnitud y dirección de los vectores aceleración tangencial, aceleración centrípeta, aceleración total, aceleración angular, velocidad angular cuando la lavadora ha girado desde 3000 rpm hasta 6000 rpm.

Answers

Answer:

d)    α = 1693.5 rad / s² , a = 392.7 m / s² ,   a_total = α √(R² +1) ,

e)   tan θ = a / α

Explanation:

This is an exercise in linear and angular kinematics.

We initialize reduction of all the magnitudes to the SI system

   w₀ = 3000 rev / min (2π rad / 1rev) (1min / 60s) = 314.16 rad / s

   w = 6000 rev / mi = 628.32 rad / s

   θ = 12 rev = 12 rev (2π rad / 1 rev) = 75.398 rad

d) ask for centripetal, tangential and total acceleration.

Let's start by looking for centripetal acceleration, let's use the formula

          w² = w₀² + 2 α θ

          α = (w²- w₀²) / 2θ

we calculate

           α = (628.32²2 - 314.16²) / 2 75.398

           α = 1693.5 rad / s²

the quantity is linear and angular are related

         

the linear or tangential acceleration is

            a =    α  R

where R is the radius of the drum

            a = 1693.5 R

Unfortunately you do not give the radius of the drum for a complete calculation, but suppose it is a washing machine drum R = 20 cm = 0.20 m

           a = 1693.5 0.20

           a = 392.7 m / s²

the total acceleration is

           a_total = √(a² + α²)

           a_total = √ (α² R² + α²)

           a_total = α √(R² +1)

e) The centripetal acceleration is directed towards the center of the movement is radial and its magnitude is constant

Tangential acceleration is tangency to radius and its value varies proportionally radius

the total accelracicon is the result of the vector sum of the two accelerations and their directions given by trigonometry

            tan θ = a / α

the angular velocity increases linearly when with centripetal acceleration

With the same block-spring system from above, imagine doubling the displacement of the block to start the motion. By what factor would the following change?
A. Kinetic energy when passing through the equilibrium position.
B. Speed when passing through the equilibrium position.

Answers

Answer:

A)     K / K₀ = 4   b)     v / v₀ = 4

Explanation:

A) For this exercise we can use the conservation of mechanical energy

in the problem it indicates that the displacement was doubled (x = 2xo)

starting point. At the position of maximum displacement

      Em₀ = Ke = ½ k (2x₀)²

final point. In the equilibrium position

      [tex]Em_{f}[/tex] = K = ½ m v²

        Em₀ = Em_{f}

        ½ k 4 x₀² = K

        (½ K x₀²) = K₀

         K = 4 K₀

          K / K₀ = 4

B) the speed value

          ½ k 4 x₀² = ½ m v²

          v = 4 (k / m) x₀

if we call

           v₀ = k / m x₀

          v = 4 v₀

         v / v₀ = 4

At what speed, as a fraction of c, will a moving rod have a length 65% that of an identical rod at rest

Answers

Answer:

v/c = 0.76

Explanation:

Formula for Length contraction is given by;

L = L_o(√(1 - (v²/c²))

Where;

L is the length of the object at a moving speed v

L_o is the length of the object at rest

v is the speed of the object

c is speed of light

Now, we are given; L = 65%L_o = 0.65L_o, since L_o is the length at rest.

Thus;

0.65L_o = L_o[√(1 - (v²/c²))]

Dividing both sides by L_o gives;

0.65 = √(1 - (v²/c²))

Squaring both sides, we have;

0.65² = (1 - (v²/c²))

v²/c² = 1 - 0.65²

v²/c² = 0.5775

Taking square root of both sides gives;

v/c = 0.76

How much heat is required to convert 5.0 kg of ice from a temperature of - 20 0C to water at a temperature of 205 0F

Answers

Answer:

Explanation:

To convert from °C to °F , the formula is

( F-32 ) / 9 = C / 5

F is reading fahrenheit scale and C is in centigrade scale .

F = 205 , C = ?

(205 - 32) / 9 = C / 5

C = 96°C approx .

Let us calculate the heat required .

Total heat required = heat required to heat up the ice at - 20 °C  to 0°C  + heat required to melt the ice + heat required to heat up the water at  0°C to

96°C.

=  5 x 2.04 x (20-0) +  5 x 336 + 5 x ( 96-0 ) x 4.2  kJ .

= 204 + 1680 + 2016

= 3900 kJ .

A stationary coil is in a magnetic field that is changing with time. Does the emf induced in the coil depend

Answers

Answer:

Explanation:

The e.m.f induced in the coil depend on the following :

(a) No. of turns in the coil

(b) Cross-sectional Area of the coil

(c) Magnitude of Magnetic field

(d) Angular velocity of the coil

The ceiling of your lecture hall is probably covered with acoustic tile, which has small holes separated by about 6.1 mm. Using light with a wavelength of 578 nm, how far could you be from this tile and still resolve these holes

Answers

Answer:

8.65x10^3m

Explanation:

See attached file

A mechanic wants to unscrew some bolts. She has two wrenches available: one is 35 cm long, and one is 50 cm long. Which wrench makes her job easier and why?

Answers

Answer:

50 cm long

When 35cm long wrench is compared to 50cm long wrench, we find that the 50cm long wrench produces more turning effect of force because it has longer distance between fulcrum and line of action of force. At conclusion, the more the turning effect of force the more it is easy to unscrew bolts.

If you wanted to make your own lenses for a telescope, what features of a lens do you think would affect the images that you can see

Answers

Answer:

Therefore the characteristics to be found are:

* the focal length must be large and the focal length of the eyepiece must be small

* The diameter of the objective lens should be as large as possible, to be able to collect small without need from light

* The system must be configured to the far sight tip,

Explanation:

The length of the telescope is

         L = f_ocular + f_objetive

the magnification of the telescope is

         m = - f_objective / f_ocular

These are the two equations that describe the behavior of the telescope. Therefore the characteristics to be found are:

* the focal length must be large and the focal length of the eyepiece must be small

* The diameter of the objective lens should be as large as possible, to be able to collect small without need from light

* The system must be configured to the far sight tip,

Electrons are accelerated through a voltage difference of 270 kV inside a high voltage accelerator tube. What is the final kinetic energy of the electrons?

Answers

Each electron winds up with kinetic energy of

(270 keV)

plus

(whatever KE it had when it started accelerating).

The metal wire in an incandescent lightbulb glows when the light is switched on and stops glowing when it is switched off. This simple
process is which kind of a change?
OA a physical change
OB. a chemical change
OC. a nuclear change
OD
an ionic change

Answers

B. A chemical change

Explanation:

I'm guessing ?

An airplane flies 1,592 miles east from Phoenix, Arizona, to Atlanta, Georgia, in 3.68 hours.
What is the average velocity of the airplane? Round your answer to the nearest whole number.

Answers

Maybe it is around 300

Answer:

433

Explanation:

In a two-slit experiment, the slit separation is 3.34 ⋅ 10 − 5 m. The interference pattern is created on a screen that is 3.30 m away from the slits. If the 7th bright fringe on the screen is 29.0 cm away from the central fringe, what is the wavelength of the light?

Answers

Answer:

The wavelength is  [tex]\lambda = 419 \ nm[/tex]

Explanation:

From the question we are told that

   The  distance of separation is   [tex]d = 3.34 *10^{-5} \ m[/tex]

   The  distance of the screen is  [tex]D = 3.30 \ m[/tex]

      The  order of the fringe is  n =  7

     The distance of separation of  fringes is y =  29.0 cm = 0.29 m

   

Generally the wavelength of the light is mathematically represented as

          [tex]\lambda = \frac{y * d }{ n * D}[/tex]

substituting values

         [tex]\lambda = \frac{0.29 * 3.34*10^{-5} }{ 7 * 3.30}[/tex]

        [tex]\lambda = 4.19*10^{-7}\ m[/tex]

        [tex]\lambda = 419 \ nm[/tex]

A single-slit diffraction pattern is formed on a distant screen. Assuming the angles involved are small, by what factor will the width of the central bright spot on the screen change if the slit width is doubled

Answers

Answer:

y ’= y / 2

thus when the slit width is doubled the pattern width is halved

Explanation:

The diffraction of a slit is given by the expressions

          a sin θ = m λ

where a is the width of the slit, λ is the wavelength and m is an integer that determines the order of diffraction.

          sin θ = m λ / a

If this equation

          a ’= 2 a

we substitute

          2 a sin θ'= m λ

          sin θ'= (m λ / a)  1/2

          sin θ ’= sin θ / 2

           

We can use trigonometry to find the width

         tan θ = y / L

as the angle is small

         tan θ = sin θ / cos θ = sin θ

         sin θ = y / L  

         

we substitute

        y ’/ L = y/L   1/2

        y ’= y / 2

thus when the slit width is doubled the pattern width is halved

Two blocks A and B have a weight of 11 lb and 5 lb , respectively. They are resting on the incline for which the coefficients of static friction are μA = 0.16 and μB = 0.23. Determine the incline angle θ for which both blocks begin to slide. Also find the required stretch or compression in the connecting spring for this to occur. The spring has a stiffness of k = 2.1 lb/ft .

Answers

Answer:

[tex]\theta=10.20^{\circ}[/tex]  

[tex]\Delta l=0.10 ft[/tex]    

Explanation:

First of all, we analyze the system of blocks before starting to move.

[tex]\Sum F_{x}=P_{A}sin(\theta)+P_{B}sin(\theta)-F_{fA}-F_{fB}=0[/tex]  

[tex]\Sum F_{x}=11sin(\theta)+5sin(\theta)-0.16N_{A}-0.23N_{B}=0[/tex]

[tex]11sin(\theta)+5sin(\theta)-0.16P_{A}cos(\theta)-0.23P_{B}cos(\theta)=0[/tex]

[tex]11sin(\theta)+5sin(\theta)-0.16*11cos(\theta)-0.23*5cos(\theta)=0[/tex]

[tex]11sin(\theta)+5sin(\theta)-0.16*11cos(\theta)-0.23*5cos(\theta)=0[/tex]  

[tex]16sin(\theta)-2.91cos(\theta)=0[/tex]  

[tex]tan(\theta)=0.18[/tex]  

[tex]\theta=arctan(0.18)[/tex]  

[tex]\theta=10.20^{\circ}[/tex]  

Hence, the incline angle θ for which both blocks begin to slide is 10.20°.

Now, if we do a free body diagram of block A we have that after the block moves, the spring force must be taken into account.  

[tex]P_{A}sin(\theta)-F_{fA}-F_{spring}=0[/tex]

Where:

[tex]F_{spring} = k\Delta l=2.1\Delta l[/tex]

[tex]P_{A}sin(\theta)-0.16*11cos(\theta)-2.1\Delta l=0[/tex]

[tex]\Delta l=\frac{11sin(\theta)-0.16*11cos(\theta)}{2.1}[/tex]

[tex]\Delta l=0.10 ft[/tex]    

Therefore, the required stretch or compression in the connecting spring is 0.10 ft.

I hope it helps you!

(a) The inclined angle for which both blocks begin to slide is 10.3⁰.

(b) The compression of the spring is 0.22 ft.

The given parameters;

mass of block A, = 11 lbmass of block B, = 5 lbcoefficient of static friction for A, = 0.16coefficient of static friction for B, = 0.23 spring constant, k = 2.1 lb/ft

The normal force on block A and B:

[tex]F_n_A = m_Agcos \ \theta\\\\F_n_B = m_Bgcos \ \theta[/tex]

The frictional force on block A and B:

[tex]F_f_A = \mu_s_AF_n_A \\\\F_f_B = \mu_s_BF_n_A[/tex]

The net force on the blocks when they starts sliding;

[tex](m_Ag sin \theta+ m_Bgsin\theta) - (F_f_A + F_f_B) = 0\\\\m_Ag sin \theta+ m_Bgsin\theta = F_f_A + F_f_B\\\\m_Ag sin \theta+ m_Bgsin\theta = \mu_Am_Agcos\theta \ + \ \mu_Bm_Bgcos\theta\\\\gsin\theta(m_A + m_B) = gcos\theta (\mu_Am_A + \mu_Bm_B)\\\\\frac{sin\theta}{cos \theta} = \frac{\mu_Am_A\ + \ \mu_Bm_B}{m_A\ + \ m_B} \\\\tan\theta = \frac{(0.16\times 11) \ + \ (0.23 \times 5)}{11 + 5} \\\\tan\theta = 0.1819\\\\\theta = tan^{-1}(0.1819)\\\\\theta = 10.3 \ ^0[/tex]

The change in the energy of the blocks is the work done in compressing the spring;

[tex]\Delta E = W\\\\F_A (sin \theta )d- \mu F_n d= \frac{1}{2} kd^2\\\\F_A sin\theta \ - \ \mu F_A cos\theta = \frac{1}{2} kd\\\\d = \frac{2F_A(sin\theta - \mu cos \theta) }{k} \\\\d = \frac{2\times 11(sin \ 10.3\ - \ 0.16\times cos \ 10.3) }{2.1} \\\\d = 0.22 \ ft[/tex]

Learn more here:https://brainly.com/question/16892315

Find the momentum of a particl with a mass of one gram moving with half the speed of light.

Answers

Answer:

129900

Explanation:

Given that

Mass of the particle, m = 1 g = 1*10^-3 kg

Speed of the particle, u = ½c

Speed of light, c = 3*10^8

To solve this, we will use the formula

p = ymu, where

y = √[1 - (u²/c²)]

Let's solve for y, first. We have

y = √[1 - (1.5*10^8²/3*10^8²)]

y = √(1 - ½²)

y = √(1 - ¼)

y = √0.75

y = 0.8660, using our newly gotten y, we use it to solve the final equation

p = ymu

p = 0.866 * 1*10^-3 * 1.5*10^8

p = 129900 kgm/s

thus, we have found that the momentum of the particle is 129900 kgm/s

You perform a double‑slit experiment in order to measure the wavelength of the new laser that you received for your birthday. You set your slit spacing at 1.11 mm and place your screen 8.63 m from the slits. Then, you illuminate the slits with your new toy and find on the screen that the tenth bright fringe is 4.71 cm away from the central bright fringe (counted as the zeroth bright fringe). What is your laser's wavelength lambda expressed in nanometers?

Answers

Answer:

 λ = 605.80 nm

Explanation:

These double-slit experiments the equation for constructive interference is

          d sin θ = m λ

where d is the distance between the slits, λ the wavelength of light and m an integer that determines the order of interference.

In this case, the distance between the slits is d = 1.11 mm = 1.11 10⁻³ m, the distance to the screen is L = 8.63 m, the range number m = 10 and ay = 4.71 cm

Let's use trigonometry to find the angle

         tan θ = y / L

as the angles are very small

          tan θ = sin θ / cos θ = sin θ

we substitute

         sin θ = y / L

we substitute in the first equation

         d y / L = m λ          

          λ = d y / m L

let's calculate

           λ = 1.11 10⁻³ 4.71 10⁻²/ (10 8.63)

           λ = 6.05805 10⁻⁷ m

let's reduce to nm

          λ = 6.05805 10⁻⁷ m (10⁹ nm / 1m)

          λ = 605.80 nm

A mass m = 0.6 kg is released from rest at the top edge of a hemispherical bowl with radius = 1.1 meters. The mass then slides without friction down the inner surface toward the bottom of the bowl. At a certain point of its path the mass achieves a speed v = 3.57 m/s. At this point, what angle \theta\:θ ( in degrees) does the mass make with the top of the bowl?

Answers

Answer:

The  angle is  [tex]\theta = 36.24 ^o[/tex]

Explanation:

From the question we are told that

    The  mass is  [tex]m = 0.6 \ kg[/tex]

     The radius is  [tex]r = 1.1 \ m[/tex]

     The speed is  [tex]v = 3.57 \ m /s[/tex]

According to  the law of energy conservation

  The  potential energy of the mass at the top is equal to the kinetic energy at the bottom i.e

      [tex]m * g * h = \frac{1}{2} * m * v^2[/tex]

 =>    [tex]h = \frac{1}{2 g } * v^2[/tex]

Here h is the vertical distance traveled by the mass  which is also mathematically represented as

      [tex]h = r * sin (\theta )[/tex]

So

     [tex]\theta = sin ^{-1} [ \frac{1}{2* g* r } * v^2][/tex]

substituting values

     [tex]\theta = sin ^{-1} [ \frac{1}{2* 9.8* 1.1 } * (3.57)^2][/tex]

     [tex]\theta = 36.24 ^o[/tex]

You want the current amplitude through a 0.450 mH inductor (part of the circuitry for a radio receiver) to be 1.50 mA when a sinusoidal voltage with an amplitude of 13.0 V is applied across the inductor. What frequency is required?

Answers

Answer:

3.067MHz

Explanation:

The formula for calculating the voltage across an inductor is expressed as

[tex]V_l = IX_l\\\\Since\ X_l = 2\pi fL\\V_l = I(2\pi fL)[/tex]

Given parameters

current amplitude I = 1.50mA = 1.5*10⁻³A

inductance L = 0.450mH = 0.450*10⁻³H

Voltage across the inductor [tex]V_l[/tex] = 13.0V

Required

frequency f

Substituting the given parametres into the formula, we have;

[tex]V_l = I(2\pi fL)\\\\13 = 1.50*10^{-3}(2*3.14*f*0.450*10^{-3})\\\\13 = 4.239*10^{-6}f\\\\f = \frac{13}{4.239*10^{-6}} \\\\f = 3,066,761 Hertz\\\\f = 3.067MHz[/tex]

Hence, the frequency required is 3.067MHz

Suppose you observed the equation for a traveling wave to be y(x, t) = A cos(kx − ????t), where its amplitude of oscillations was 0.15 m, its wavelength was two meters, and the period was 2/15 s. If a point on the wave at a specific time has a displacement of 0.12 m, what is the transverse speed of that point?

Answers

Answer:

15m/s

Explanation:

The equation for a traveling wave as expressed as y(x, t) = A cos(kx − [tex]\omega[/tex]t) where An is the amplitude f oscillation, [tex]\omega[/tex] is the angular velocity and x is the horizontal displacement and y is the vertical displacement.

From the formula; [tex]k =\frac{2\pi x}{\lambda} \ and \ \omega = 2 \pi f[/tex] where;

[tex]\lambda \ is\ the \ wavelength \ and\ f \ is\ the\ frequency[/tex]

Before we can get the transverse speed, we need to get the frequency and the wavelength.

frequency = 1/period

Given period = 2/15 s

Frequency = [tex]\frac{1}{(2/15)}[/tex]

frequency = 1 * 15/2

frequency f = 15/2 Hertz

Given wavelength [tex]\lambda[/tex] = 2m

Transverse speed [tex]v = f \lambda[/tex]

[tex]v = 15/2 * 2\\\\v = 30/2\\\\v = 15m/s[/tex]

Hence, the transverse speed at that point is  15m/s

Other Questions
According to a survey, typical American spends 154.8 minutes per day watching TV. A survey of 50 Internet users results in a mean time watching TV per day of 128.7 minutes, with a standard deviation of 46.5 minutes. Which appropriate test we should use to determine if Internet users spend less time watching TV The lines on a 2-cup liquid measuring cup divide each cup into eighths. If you measure 1 3/4 cups of water, between which two quantities can you be certain that your exact measurement will be? 5. Find the product of p(x) and q(x) if p(x) = 2x+7 and q(x) = 4x-9a. Is p(x) a polynomial? If not, give an explanation.b. Is q(x) a polynomiala If not, give an explanation.c. Is the product a polynomials If not, give an explanation,d. If the product is a polynomial, identify type and degree. Which point slope form equations could be produced with the points (3,2) and (4,6) How are the hours of darkness linked to the flowering time in plants? It is always necessary for an agent to disclose the identity of the principal to any third person with whom he is contracting; otherwise the contract becomes void.a. Trueb. False Bioplastics made from corn grown using industrialized agricultural methods would have a smaller ecological footprint that bioplastics made from native prairie switchgrass.A. TrueB. False Suppose an industry earns a rate of return of 10%, which is twice as high as that of competitive industries, 5%. How much is the price overcharge of that industry, if its capital is valued at half its annual revenue If the sin of angle x is four fifths and the triangle was dilated to be two times as big as the original, what would be the value of the sin of x for the dilated triangle? Clue: Use the slash symbol ( / ) to represent the fraction bar, and enter the fraction with no spaces. Which is the best example of how women went against social norms during the Roaring Twenties? Women became flappers who danced the Charleston. Women became businesspeople who bought cars. Women became celebrities who starred in movies. Women became landlords who bought property. What are an advantage and a disadvantage to using amap rather than a globe to study the Earth's geography Determine whether each equation has one solution, no solution or infinitely many solutions. 4x + 10 = 2(2x + 5) 4x - 5 = 4x + 10 4x - 5 = -5 Read each of the following statements. If it describes a process of reproduction, write yes.If not, write no.19. New leaves appear on a tree in spring.20.An amoeba divides in half.21.A bean plant produces seeds in long pods.22.Pollen grains are released from a flower.23.A sea star produces a new arm after losing one to a predator. Why do interest rates on loans tend to be higher in a strong economy than in a weak one? What were the three forms of English madrigals? Describe each type. What were chorales? Why were they popular? What is a consort? Who was Guillaume Dufay? What contributions did he make to Renaissance music? Who was William Byrd? What contributions did he make to Renaissance music? Critical Thinking Questions How did music in the Renaissance differ from medieval music? What were the effects of the printing press on music and composers? If the Renaissance is thought to represent a rebirth or new birth, how is this reflected in the music of the Renaissance? What was the role of music during the Renaissance? How was it used in society? Many of the songs from ancient times through the Renaissance built on the melodies of previous songs. What were the advantages for composers of using a melody that had already been created? Factor 13ab3 + 39a2b5. In the figure below, if the angle is right what is the value of x? what is the definition of a pogrom? Identify if there exist argument. Then, separate the argument into premises and conclusion.From a letter to the editor: the idea of a free press in America today is joke. A small group of people, the nations advertisers, control the media more effectively than if they can dictate everything from programming to news report content. Politicians as well as editors shiver in their boots at the thought of such a boycott. This situation is intolerable and ought to be changed. I suggest we all listen to National Public Radio and public television. Employees in a department are considered a team only when they directly interact and coordinate work activities with each other.a. Trueb. False