A typical supply chain may involve a variety of stages such as:
(i) Customers.
(ii) Retailers.
(iii) Wholesalers/Distributors.
What is a supply chain?A supply chain is a group of people and businesses involved in producing and distributing goods to customers.
The supply chain is the network of all the people, businesses, resources, tasks, and technological advancements involved in the production and distribution of a good. An entire supply chain, from the delivery of raw materials from the supplier to the manufacturer to the final delivery to the customer, is included.
Therefore, the typical supply chain may involve a variety of stages such as Customers, Retailers and Wholesalers.
Learn more about supply chain on:
https://brainly.com/question/25160870
#SPJ
The front rotors are removed from a vehicle. The surface face on both rotors have small cracks and appear to have a blued finish. The brake rotors should be:
The front rotors are removed from a vehicle. The surface face on both rotors have small cracks and appear to have a blued finish. The brake rotors should be: discarded
When should brake rotors be discarded?Only around 1 or 2 millimetres of rotation of a rotor is possible before it is too thin to be used safely and must be discarded and replaced. Repeatedly overheated brake rotors may deform and cause a vibration in the wheel. Your tyres and suspension system will endure substantial wear and tear from this warping.The thickness at which a rotor should be changed is its discard thickness. Discard thickness is often understood to be a parameter that is connected to heat. It is commonly accepted that a rotor cannot disperse heat if it is at or below the discard thickness.Learn more about Brake unit refer to :
https://brainly.com/question/10162789
#SPJ4
p16.5 the magnetic field produced in the air gap of an induction motor by the stator windings is given by b
B=Bmcos(t2) is the formula for the magnetic field an induction motor's stator windings produce in the air gap.
Explain about the magnetic field?In a magnetic field, a moving charge experiences an external force that is perpendicular to the magnetic field and has its own velocity.
Magnetism is produced by how electric charges flow. All substances are made up of tiny units called atoms. The tiny electric-charged particles known as electrons are found inside every atom. An atom's nucleus, or core, is surrounded by electrons that spin like tops.
The magnetic field around a permanent magnet or a wire carrying a continuous electric current in one direction is stationary and is known as a magnetostatic field. Its direction and magnitude are constant at any given site.
To learn more about magnetic field refer to:
https://brainly.com/question/14411049
#SPJ1
refer to the exhibit. an engineer issued the ping 192.168.3.100 command from r1, and the ping was successful. are there any routes that would not be verified as working by that successful ping?
Yes, the static route for 192.168.2.0 is incorrectly configured.
What is a static route?Static routing is a routing method that requires manual configuration. The majority of network managers follow static routing. In areas with consistent network and environmental characteristics, this routing will be heavily used.
Static routing is fixed and unaffected by network changes, in contrast to dynamic routing. It is used on a router to increase routing effectiveness and to act as a fallback in case other data cannot be shared.
It takes advantage of the routes that connect the two routes, which are not immediately updatable. As a result, whenever the network changes, static routes must be manually reconfigured. Compared to dynamic maps, it takes little bandwidth. It can be applied to situations where network traffic is planned and predictable.
To know more about static route refer:
https://brainly.com/question/6783973
#SPJ4
while discussing ei service, technician a says the crankshaft sensor may be rotated to adjust the basic ignition timing. technician b says the crankshaft sensor may be moved to adjust the clearance between the pickup coil and reluctor on some ei systems. who is correct?
It is true what technician b said about some ei systems allowing the clearance between the pickup coil and reluctor to be adjusted by moving the crankshaft sensor.
What mechanism is in charge of indicating when the coil is being switched on and off, or most often only on?A device that manages a bank of switches is a relay controller. Logic-controlled magnetic coils are turned on and off using relay controllers.
What occurs when the switching device interrupts the low voltage current flow in the coil primary winding?The magnetic field quickly collapses and a high voltage is induced in the primary winding when the primary current flow is stopped (CEMF Counter electromotive Force).
To know more about technician visit:-
https://brainly.com/question/14290207
#SPJ4
The applied force at point E and the applied couple moment at point D are shown in the figure. Complete calculate the following (Where applicable, express the results as the (x, y, z) components of a Cartesian vector)
7. Sef up the copatices of equilibritm (You mest sbow all relerant equilibrium cojuations one below the other. If you fail to so so, you will not get any credit for this part) (18 points)
8. Calculate the tension in the rope and the reactions at support A. (12 points)
Substitute an analogous resultant and pair second acting at point O for this force system. Write the findings as Cartesian vectors.
What exactly is a Cartesian idea?The ontological dualism of mind (also known as spirit or soul) with matter was adopted by the Cartesian school. Self-conscious thought is the essence of the mind, while three-dimensional extension is the essence of matter. God is a third, limitless substance, and necessary existence is what makes God who He is.
What makes anything a Cartesian?The Cartesian plane is a plane with such a rectangular coordinate system which assigns each point in the surface with a pair of integers. It is named just after mathematician Rene Descartes (1596–1650).
To know more about Cartesian visit:
https://brainly.com/question/28574364
#SPJ1
a gravity fuel system requires that the fuel line be able to carry 150% of the fuel necessary for fuel power operatioing. t/f
Because an injector system is built with gasoline storage above engine and motor system and lines flowing fuel first from container to the engine through gravity, this statement is accurate.
Describe a fuel.When a material comes into touch with atmosphere at a temperature similar to or higher than fuel's ignition temperature, the substance will ignite and release energy. Any flammable objects may be used as fuel. The calorific value of a material is a measure of how much energy it produces.
What materials make up fuel?Fuels called as oil products are created from petroleum and the hydrocarbons found in natural gas. Coal, oil and gas, nor biofuel can also be employed to make petroleum products.
To know more about Fuel visit:
https://brainly.com/question/29220785
#SPJ4
he hybridization of the carbon atom labeled x in the molecule below is 10: HH 1 1 II H-N-C-0-0-H HC-H H A) sp B) sp2 C) sp3 D) sp3dE) sp3d2
The hybridization of the carbon atom labeled x in the molecule below is 10: HH 1 1 II H-N-C-0-0-H HC-H H is sp2
What is meant by carbon atom?It is a non-metal and is denoted by the letter C. It has six protons, six neutrons, and six electrons, clearly. Because it can form virtually infinitely strong bonds with other carbon atoms, a carbon atom is regarded as remarkable and unique.
Carbon is a chemical element with the symbol C and atomic number 6 (from the Latin carbo, meaning "coal"). Its tetravalent atom allows for the formation of covalent chemical bonds using four of its electrons. It isn't made of metal. The periodic table's group 14 includes it.
In actuality, proteins, DNA, RNA, carbohydrates, lipids, and many other significant compounds in your body are supported by carbon atoms. These intricate biological entities are categorized as organic molecules and frequently referred to as macromolecules.
To learn more about carbon atom refer to :
https://brainly.com/question/13255170
#SPJ4
9.6 design the circuit in fig. p9.6 to obtain a dc voltage of 0 v at each of the drains of q1 and q2 when vg1
Integrated circuit transistors down to large electronic systems can all be included in the circuit design process.
What does circuit design entail?The step of the design cycle where the integrated circuit's schematics are produced is frequently referred to as "circuit design" in integrated circuit design automation. Between logic design and physical design, this is typically the next stage.Integrated circuit transistors down to large electronic systems can all be included in the circuit design process. For simple circuits, one individual can frequently complete the design process without the requirement for a planned or systematic design procedure.
The complete question is,
P9.6 will produce a dc voltage of +0.1 V at each of Q 1's and Q 2's drains when V G1 = V G2 = 0 V. Start all of the transistors.
To learn more about Circuit design process refer to:
https://brainly.com/question/15052137
#SPJ4
A safety zone is a specially marked area for passengers to get on or off of buses or trolleys. You may not drive through a safety zone:When a bus or trolley is present.When a bus or trolley is unloading passengers.At any time for any reason.
You may not drive through the safety zone specially marked for passengers at any time for any reason.
Why the safety zone on road is important?helping to make the environment safer Drivers approaching places frequented by vulnerable pedestrians, such as the vicinity of a school where children may be crossing roads, using footpaths, or playing nearby, can be alerted by Safety Alert Zones.
What does "road safety" mean?Road safety is the application of techniques and policies to lessen the chance that people using the road network would be engaged in an accident or incident that could result in significant injuries, property damage, or even death.
To know more about road safety visit:
https://brainly.com/question/29963706
#SPJ4
Number the DOFs and form the stiffness matrix for the show bar system (which has DOFs in the horizontal direction only). Develop the force vector and solve the stiffness equations to find the tip displacement under the given force. Compare your answer to RISA
When a force is applied, stiffness, which is defined as the resistance of an elastic body to deflection or deformation, can be represented as
k = F /[tex]$\delta$[/tex] (1), where k = stiffness (N/m, lb/in).
What is the formula for stiffness?Where F is the load and is the bending deflection, it has a stiffness of
S = F/[tex]$\delta$[/tex]. When a force, F, is applied to an item, its stiffness, k, is calculated as the product of the force's magnitude and the object's deformation,. The slope of the elastic portion of the stress-strain curve for a particular material is taken into consideration when calculating it by dividing the longitudinal stress by the strain. A material's stiffness is primarily categorized by its modulus of elasticity.
A material's stiffness can be summed up by its Young's modulus, also known as elastic modulus. To put it another way, it is how easy it can be bent or stretched. To be more precise, the mathematics and physical values are calculated as follows: Young's modulus equals stress minus strain.
To learn more about stiffness equation refer to :
https://brainly.com/question/14806757
#SPJ4
evaluate various types of attacks and select the scenario that simulates a transitive access attack.
The scenario that simulates a transitive access attack may include an attacker who exploits a weakness in a shopping website in order to mimic an end user and obtain services from a distributor.
What is meant by a transitive access attack?A transitive access attack may be characterized as a type of misuse of trust that causes issues with securing information or control. It attempts to access a back-end server through another server.
A SQL injection attack is an example of a transitive access attack that can bypass many other security controls. For example, if system A trusts B and system B trusts C, then it is possible for system A to inadvertently trust system C, which might lead to exploitation by a nefarious operator on system C.
Therefore, an attacker exploits a weakness in a shopping website in order to mimic an end user and obtain services from a distributor representing a scenario that simulates a transitive access attack.
To learn more about Network attack, refer to the link:
https://brainly.com/question/14366812
#SPJ1
For the full-bridge inverter, the dc source is 125 V, the load is a series RL connection with R = 10 Ohm and L =20mH, and the switching frequency is 60 Hz. (a) Use the switching scheme bellow and determine the value of a to produce an output with an amplitude of 90V at the fundamental frequency. (b) Determine the THD of the load current.
(a) Using the switching scheme given we have determined the value of ∝ to produce an output with an amplitude of 90V at the fundamental frequency i.e. ∝ = 36.96°
(b) The THD of the load current is = 1.6919
What is amplitude?The maximum displacement or distance made by a point on a vibrating body or wave relative to its equilibrium position is known as the amplitude in physics. It is equivalent to the length of the vibration path divided in half. A pendulum's amplitude is therefore equal to half the distance that the bob travels when swinging from one side to the other. Vibrating sources produce waves, whose amplitude is inversely proportional to the source's amplitude.
The maximum deviation of any point on the string from its position when the string is at rest is used to determine the amplitude of a transverse wave, such as the wave on a plucked string. The maximum displacement of a particle from its equilibrium position is used to determine the amplitude of a longitudinal wave, such as a sound wave.
Learn more about amplitude
https://brainly.com/question/3613222
#SPJ4
Many sites have been penalized for automating the creation of what kinds of links?
O Editorial links
O Manual links
O Manufactured links
O Both A and B
Note that many sites have been penalized for automating the creation of Manual Links. (Option B)
What is a manual link?Simply said, a manual link-building campaign is an activity of deliberately attempting to increase connections to a website.
There are three sorts of linkages in general:
Internal links are hyperlinks that lead from one page on your website to another.External links are hyperlinks that take you away from your website and to another resource.Backlinks are hyperlinks that go from one site to another.Manual links, also known as hyperlinks, are used to link one webpage or document to another. They allow users to easily navigate from one web page or document to another by clicking on a link. Manual links can be created in HTML by using the tag, which stands for "anchor." When a user clicks on a manual link, their web browser will automatically open the linked webpage or document.
Manual links are an essential part of the World Wide Web and are used to connect web pages and documents together in a way that allows users to easily navigate and access information.
Learn more about the links:
https://brainly.com/question/29809523
#SPJ1
Which three forms of energy are used or produced when you run an ordinary lawn mower?
Electrical energy is converted into motion by the motor. Energy used for mechanical motion. The engine converts mechanical energy into chemical energy when a person operates a gas-powered lawn mower.
Why is energy so crucial?Energy is a major factor in our everyday lives as Energy is used to heat and cool the structures that people have built. You need energy to move one fingers, get up from bed, or even walk down the street.
What is the primary energy source?The sun is among the most significant energy sources. The majority of energy on earth comes from the sun, which is where it all began. We receive solar thermal energy.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ1
The employee time card for John Winter indicates that he spent last week performing routine maintenance on factory machinery. Payments made to Winter for last week's work should be
If his employee time card shows that he spent last week performing normal maintenance on industrial machinery, payments for last week's labour should be charged to the Manufacturing Overhead account.
What is a timecard for employees?A time card, often known as a timesheet, is a tool for keeping track of how much time an employee spends on each task. Utilizing a time card enhances project execution, decision-making, and labour and governmental regulations compliance.
What does a time card serve as?The time an employee starts and stops working is often printed on the card when it is entered into a time clock. The payroll team uses it to determine how many hours an employee will be paid for.
To learn more about payments visit:
brainly.com/question/15136793
#SPJ4
Suppose that Brussels sprouts are the main ingredient in Ronni's Vegan Dog Treats. Suppose further that the productivity of dog treat workers increases while, at the same time, the number of buyers of vegan pet food decreases. Everything else held constant, the equilibrium price of dog treats will and the equilibrium quantity of dog treats transacted will Select one. O A decrease; be ambiguous OB.increase; be ambiguous 6. be ambiguous, decrease OD, increase, decrease E. decrease increase F. be ambiguous increase Gincrease increase H. decrease; decrease
Suppose that Brussels sprouts are the main ingredient in Ronni's Vegan Dog Treats. Suppose further that the productivity of dog treat workers increases while, at the same time, the number of buyers of vegan pet food decreases. Everything else held constant, the equilibrium price of dog treats will decrease and the equilibrium quantity of dog treats transacted will be ambiguous.
What is ambiguous?
It's meaning is: doubtful or uncertain especially from obscurity or indistinctness
Like many words in English, vague has multiple meanings. A quality that some might call ambiguous. The word can mean ``doubtable or uncertain, especially because of obscurity or ambiguity'', ``understandable in two or more possible meanings or ways'', and ``inexplicable''.
Latin The prefix ambi- means "both" and has misled many people into vague and ambiguous beings. Ambivalent refers to having mixed, conflicted, or multiple feelings about something (his second part of this word comes from the Latin valere, "strong, worthy"). Ambiguous, on the other hand, means unclear or many times intelligible (partially derived from the Latin agere, "to drive").
Suppose that Brussels sprouts are the main ingredient in Ronni's Vegan Dog Treats. Suppose further that the productivity of dog treat workers increases while, at the same time, the number of buyers of vegan pet food decreases. Everything else held constant, the equilibrium price of dog treats will decrease and the equilibrium quantity of dog treats transacted will be ambiguous.
To know more about ambiguous, visit:
https://brainly.com/question/27286097
#SPJ4
Code example 22-1
import java.util.List;
import java.util.ArrayList;
public class ProductsApp {
public static void main(String[] args) {
List products = new ArrayList<>();
products.add(new Product("java", "Murach's Java Programming", 57.50, 5000));
products.add(new Product("cshp", "Murach's C#", 57.50, 2451));
products.add(new Product("mysql", "Murach's MySQL", 57.50, 473));
// call the filterProducts() method
}
public static List filterProducts(List products, TestProduct condition) {
List filteredProducts = new ArrayList<>();
for (Product p : products) {
// test the product and add to the list if it meets the condition
}
return filteredProducts;
}
}
(Refer to code example 22-1) Given the declaration for the TestProduct() interface that follows, which statement would you use to test the condition specified by the lambda expression that's passed to the filterProducts() method?
public interface TestProduct {
boolean test(Product p);
}
The statement that I would use to test the condition specified by the lambda expression that's passed to the filterProducts() method is:
if (condition.test(p)) {...}
What is lambda expression?Java 8 introduced lambda expressions. A lambda expression is a brief segment of code that accepts input parameters and produces a result. Lambda expressions are similar to methods in that they can be used directly within the body of a method and do not require a name.
It offers a concise and clear method for expressing a single method interface. It is very helpful in a library's collection. It aids in data extraction, filtering, and iteration from collections.
An interface that has a functional interface is implemented using the Lambda expression. Lots of code is saved. We don't have to define the method again to provide the implementation when using a lambda expression.
Learn more about lambda expression
https://brainly.com/question/23693370
#SPJ4
The blade of a framing square is how many inches long
Answer:
The framing square BLADE or body: this is the wider and longer arm of the "L", normally 2" in width and 24" long.
Explanation:
I hope this helps! :) If it does could you please mark me brianliest?
why are stresses or impacts to the side of the shaft of long bone more dangerous than stress applied along the axis of the shaft?
The long axis of the shaft, which is parallel to the osteons and does not bend when forces are applied to either end, is rigid. A fracture might occur as a result of stresses or blows to the shaft's side.
How can a long bone's structure withstand pressure?
Trabeculae, which are thin bone plates aligned with the potential stress imposed, support the long bone by being present in it. The flexible plates spread the pressure throughout the bone to contain it and get thicker toward the core.
What is a bone stress reaction?
A deep bone bruise that develops from trauma or overuse is comparable to a stress reaction. Upon diagnosis, stress injuries can be divided into two categories: early (stress reaction) and late (stress fracture). A stress fracture will form from an untreated stress reaction.
To know more about stress reaction visit;
https://brainly.com/question/10677606
#SPJ4
T/F when labeling a k-map, it makes no difference if adjacent vertical and horizontal squares differ by more than one variable since the end result will be correct
It doesn't matter if adjacent vertical and horizontal squares differ by more than one variable when labeling a k-map because the outcome will still be accurate. false
All the elements that could change throughout an experiment are considered variables. The variable that you alter and control in your experiment is known as the independent variable. The dependent variable, over which you have no control, is impacted by the responses of the independent variable. Imagine you are doing an experiment to determine how the density of cupcakes is impacted by various sweeteners. Because you get to choose the type of sugar you add, it would be the independent variable. Given that it depends on the type of sugar utilised, density would be the dependent variable. A variable is a quantity that could change depending on the circumstances of an experiment or mathematical problem.
Learn more about variable from
brainly.com/question/82796
#SPJ4
The principal disadvantages(s) with the waterfall development methodology is (are) _____.
a. a long time elapses between completion of the system proposal and the delivery of the system
b. if the team misses important requirements, expensive post-implementation programming may be needed
c. the design must be completely specified on paper before programming begins
d. all of the above
e. none of the above
Note that the principal disadvantage (s) with the waterfall development methodology is (are) "All the Above" (Option D).
What is the Waterfall Development Methodology?The Waterfall Development Methodology is a process for creating software that involves a series of steps that are followed in a specific order. It is called the "waterfall" method because each step flows into the next, like water flowing down a waterfall.
The first step in the Waterfall Development Methodology is to gather requirements, which means figuring out what the software should do. Next, a design is created, which outlines how the software will look and work. Then, the software is actually developed, which means writing the code and creating the software. After that, the software is tested to make sure it works correctly and any problems are fixed. Finally, the software is deployed, which means it is made available for people to use.
Learn more about the Waterfall Methodology:
https://brainly.com/question/28750057
#SPJ1
T/F for a real-world transistor where s12 is non-zero, a simultaneous conjugate match is desired at the input and output of the transistor to achieve maximum linear gain.
For a real-world transistor where s12 is non-zero, a simultaneous conjugate match is desired at the input & output of the transistor to achieve maximum linear gain. (True)
What is a transistor?The amplifier or switch for electrical signals and power is a transistor, a semiconductor device. An essential component of contemporary electronics is the transistor. It's made of semiconductor material and typically has three terminals or more for connecting to an electronic circuit.
The current flowing through a different pair of terminals on a transistor is controlled by the voltage or current applied to one pair of those terminals. A transistor has the capacity to amplify a signal because the controlled (output) power and controlling (input) power can both be higher than one another. Integrated circuits contain many more transistors than those that are packaged individually.
Learn more about transistor
https://brainly.com/question/1426190
#SPJ4
Linux help
You've experienced some network connectivity issues, and you suspect the issue may be one of the NICs in your computer.
In this lab, your task is to:
Stop the enp2s1 NIC as the first step to isolating the problem.
Verify that enp2s1 is down.
Linux command will be: sudo ifdown enp2s1
Why to use enp2s1?This command will stop the enp2s1 NIC and disable it from sending or receiving data on the network.
To verify that enp2s1 is down, you can use the following command:
ip a
This command will display the status of all network interfaces on the computer. You should see enp2s1 listed as "DOWN" if it has been successfully stopped. You can also use the following command to check the status of a specific interface:
ip a show enp2s1
This command will show the status and other information about the enp2s1 interface. If it is down, the status will be listed as "DOWN".
Alternatively, you can also use the following command to check the status of the enp2s1 interface:
ifconfig enp2s1.
This command will show the status and other information about the enp2s1 interface. If it is down, the status will be listed as "DOWN" and there will be no information about the interface's IP address or other network connectivity details.
To Know More About network connectivity, Check Out
https://brainly.com/question/21442494
#SPJ4
Question 9
Most multi-national companies have inherited disparate international systems which are based on outdated concepts of information processing.
True
False
The answer is true, Most multi-national companies have inherited disparate international systems which are based on outdated concepts of information processing.
What are multi-national companies?
Multinational Corporations (MNCs), also known as Multinational Corporations (MNEs), Transnational Corporations (TNEs), Transnational Corporations (TNCs), International Corporations or, with a subtle but contrasting sense, Stateless Corporations, A business organization that you own and manage. Offering goods or services in at least one country other than your home country. Control is seen as a key aspect that distinguishes multinational corporations from international portfolio investment organisations. B. Some international mutual funds invest in foreign companies solely to spread financial risk. The Black's Law Dictionary suggests that a company or group should be considered a multinational company "if it derives 25% or more of its revenues from operations outside its home country."
The answer is true, Most multi-national companies have inherited disparate international systems which are based on outdated concepts of information processing.
To know more about multi-national companies, visit:
https://brainly.com/question/494475
#SPJ4
While preparing a software inventory report, a security analyst discovers an unauthorzed program installed on most of the company's servers. The program utilizes the same code signing certificate as an application deployed to only the accounting team. After removing the unauthorced program, which of the following mitigations should the analyst implement to BEST secure the server environment? a. Revoke the code signing certificate used by both prograrns.
b. Block all unapproved file hashes from installation. c. Add the accounting application fite hash to the allowed last. d. Update the code signing certificate for the approved application
The least expensive certificate for servers that only have internal access is one that is self-signed.
What ought to be listed on a software inventory?Detailed information about the installed software, such as the version number and patch level, should be included in inventories at the very least. For each type of device, resource custodians should compile a list of approved software. The only software required to fulfill company needs should be included in authorized software.
What distinguishes the inventories of hardware and software?Information on memory, operating systems, manufacturers, device kinds, peripherals, and other items are included in the hardware inventory details. Information on the software found in the network is provided by the software inventory, which is organized by volume and software vendors.
to know more about software here:
brainly.com/question/985406
#SPJ1
general motors is offering a rebate on pickup trucks purchased this month. this activity involves the _______ ingredient of the marketing mix.
General motors is offering a rebate on pickup trucks purchased this month. this activity involves the pricing ingredient of the marketing mix.
What is marketing mix?As a component of an all-encompassing marketing strategy, a marketing mix includes various areas of emphasis. The phrase frequently alludes to the classification known as the four Ps, which originally stood for product, price, placement, and promotion.
Instead of focusing solely on one message, effective marketing touches on a variety of topics. This makes it easier to connect with more people, and by remembering the four Ps, marketing professionals are better able to keep their attention on the things that really matter.
When launching new products or updating current ones, organisations can make more strategic decisions by concentrating on the marketing mix.
Learn more about marketing mix
https://brainly.com/question/859394
#SPJ4
f the hubble plots in figures 2-4 represented three universes that are the same size, which hubble plot belongs to the youngest universe? explain your reasoning
Figure 3. The fastest expansion rate means it would have taken the least amount of time to reach that size is hubble plot belongs to the youngest universe.
What can we infer about the cosmos from Hubble's law?One of the most significant quantities in cosmology is the Hubble constant because it informs us how quickly the universe is expanding, which may be used to calculate the age and history of the universe.Utilizing data from instruments that detect the cosmic microwave background, which is thought to represent light released shortly after the Big Bang, is one method. With an error rate of just 0.5 km/s/Mpc, these analyses have determined the Hubble Constant to be 67.4 km/s/Mpc.In essence, Hubble's Law implies that a galaxy recedes from ours quicker the farther away it is.The complete question is page 158 11. If the Hubble plots in figure 2-4 represented three universes that are the same size, which Hubble plot belongs to the youngest universe>
To learn more about Hubble's Law refer to:
https://brainly.com/question/19819028
#SPJ4
the density of totally crystalline polyethylene at room temperature is 1.213 g/cm3. also, at room temperature the unit cell for this material is triclinic with the following lattice parameters: a
At room temperature the unit cell for this material is triclinic is 1 unit/cell.
What is the unit cell?In the problem statement we are given the following equation and information:
V = abc * sqrt(1 - cos^2 alpha - cos^2 beta - cos^2 gamma + 2cos alpha * cos beta * cos gamma)
= (0.497)(0.547)(1.729) √1 - cos2 48.4 - cos² 76.7 - cos² 62.5 + 2 cos 48.4 cos 76.7 cos 62.5
= 0.31n * m ^ 3
Next calculate the repeat unit weight for Nylon 6,6
m = 12A_{C} + 22A_{H} + 2A_{O} + 2A_{N}
= 12(12.01) + 22(1) + 2(16) + 2(14.01)
= 226.14g / m * ol
We can now calculate the number of repeat units per a unit cell. However we must convert V from n * m ^ 3 to c * m ^ 3 which results in V = 3.1 * 10 ^ - 22
n = (rho*VN)/m
= (1.213(3.1 * 10 ^ - 22)(6.02 * 10 ^ 23))/226.14
1 unit/cell.
The complete question is The density of totally crystalline nylon 6,6 at room temperature is 1.213g / c * m ^ 3 Also, at room temperature the unit cell for this material is triclinic with lattice parameters:
a = 0.497nm c = 48.4 deg
b = 0.547nm beta = 76.6 deg
c = 1.729nm y = 62.5 deg
If the volume of a triclinic unit cell, V tr i prime is a function of these lattice parameters as
V tri =abc sqrt 1-cos^ 2 a-cos^ 2 beta-cos^ 2 gamma+2 cos a cos beta cos gamma
determine the number of repeat units per unit cell.
Click on the link to access Table 4.3.
Atomic weights for several elements are included in the following table:
Carbon 12.01 g/mol
Chlorine 35.45 g/mol
Fluorine 19.00 g/mol
Hydrogen 1.008 g/mol
Oxygen 16.00 g/mol
Nitrogen 14.01 g/mol
To learn more about unit cell refer to:
https://brainly.com/question/17218051
#SPJ4
when recovering cfc, hcfc, or hfc refrigerant into a non-pressurized container from a household refrigerator with an inoperative compressor it is; a. helpful to heat and strike the compressor with a rubber mallet. b. only necessary to recover as much refrigerant as will naturally flow out of the system. c. not necessary to recover since the refrigerant is probably contaminated. d. necessary to chase refrigerant from the oil with pressurized dry nitrogen.
When recovering CFC, HCFC, or HFC refrigerant into a non-pressurized container from a household refrigerator with an inoperative compressor it is helpful to heat and strike the compressor with a rubber mallet.
What is refrigerant compressor?The refrigeration system's beating heart is the compressor. The compressor serves as the system's pump, distributing refrigerant.
The compressor operates as a result of temperature sensors. Recurrent refrigeration cycles are used in refrigeration systems to cool items.
As implied by its name, the compressor takes low pressure gas from the evaporator and compresses it into high pressure gas. The temperature increases when the gas is compressed. The condenser receives the hot refrigerant gas after that.
It is beneficial to heat the compressor and hit it with a rubber mallet when recovering CFC, HCFC, or HFC refrigerant into a non-pressurized container from a home refrigerator with an inoperative compressor.
Thus, the correct option is a.
For more details regarding refrigerant compressor, visit:
https://brainly.com/question/13389697
#SPJ1
Computer Science question
Answer: а в г
Explanation:
