ASAP Would you expect the odor of an open bottle of perfume to spread through the air faster when the room temperature is 85F or 55F

Answer:

 24He

Explanation:

When a nuclide is bombarded with alpha particles, we notice an increase in its mass and charge since an alpha particle has a mass of four and a charge of +2. recall that nuclear equations must be balanced. That is, the masses and charges on the left hand six and the right hand side of the nuclear reaction equation must be exactly the same.

Looking at the nuclear reaction at hand, the total mass on the left hand side has to be 246 while the total charge on the left hand side of the equation will be 98. Coming over to the right hand side, the total masses are also found to be the same as a neutron with no charge and a mass of 1 is produced. Hence the nuclear reaction equation is balanced when an alpha particle (helium nucleus) is substituted for X in the equation.

Answer:

24HE

I took the test!

Answer:

Your answer is cells. Hope this helps!

Answer:

B. Watermelon

Explanation:

Watermelon is the only option with a definite shape that wouldn't change if you put it in a bowl

Answer:

It is endothermic and entropy increases.

Explanation:

Answer:

There are 0.12269 Liters of Iron

Explanation:

First, by means of the molecular weight equation, the grams of iron corresponding to 17.3 moles can be calculated:

[tex]MW=\frac{mass(grams)}{moles}[/tex]

[tex]mass=MW*moles=55.845\frac{g}{mol} *17.3mol=966.119 g[/tex]

Then using the density equation the iron milliters are calculated:

[tex]d=\frac{mass(g)}{volume(mL)}[/tex]

[tex]volume=\frac{mass}{density}=\frac{966.119g}{7.874\frac{g}{mL} } =122.69 mL[/tex]

Milliliters to liters are converted:

122.69 mL = 0.12269 L of Iron.

Answer:

[tex]V_{Fe}=0.125L[/tex]

Explanation:

Hello,

In this case, given the moles of iron, we need to use it atomic mass (55.845  g/mol) and density (7.874 g/cm³) in order to firstly convert from moles to grams and secondly from grams to cubic centimetres:

[tex]V_{Fe}=17.6molFe\times \frac{55.845gFe}{1molFe}*\frac{1cm^3}{7.874gFe}=124.8cm^3[/tex]

Finally, we obtain the volume in litres by:

[tex]V_{Fe}=124.8cm^3*\frac{1L}{1000cm^3} \\\\V_{Fe}=0.125L[/tex]

Best regards.

Answer:

Lens

A curved piece of glass or other transparent material that is used to refract light.

Explanation:

u got ig?

A curved piece of glass or other transparent material that is used to refract light is called a lens. The correct option is B).

A curved piece of transparent material, such as glass, that bends light is called a lens. A lens's shape and the object's position both affect the kind of image it produces.

The center of a concave lens is thinner than the edges. Bent glass is defined as glass that has been curved or bent into a convex or concave shape. The desired shape is created by gently heating the glass until it becomes pliable, then molding it into that shape.

Light is refracted through lenses. When a light beam enters a lens, it is refracted; then, when it leaves the lens, it is refracted once more.

Therefore, the correct option is the B) lens.

To learn more about the lens, refer to the link:

https://brainly.com/question/766997

#SPJ2

Answer: Gold is shiny and bright just like the sun. Gold is yellow.

Explanation:

Answer:

sediment, metamorphic rock, sedimentary rock, weathering and erosion

Explanation:

for edge 2020

hope this helps

HAVE A GREAT DAY : )

Sediment, sedimentary rock, or metamorphic rock are the parts of the rock cycle. Therefore, the correct option is option A.

Sedimentary rocks are created by the aggregation or deposition of organic or mineral particles at the Earth's surface, following by cementation. Sedimentation refers to the mechanisms that lead these grains to settle in situ.

Any of a family of rocks formed by the modification of pre - existing rocks in reaction to changing environmental circumstances, such as temperature, pressure, or mechanical stress, as well as the addition or deletion of chemical components is  metamorphic rock. Sediment, sedimentary rock, or metamorphic rock are the parts of the rock cycle.

Therefore, the correct option is option A.

To know more about rock, here:

https://brainly.com/question/29767269

#SPJ2

element j

ebhdfukfyerfkuq

Answer:

As known Water is an Example of an Element.

o advance counterterrorism efforts in other countries

Answer:

D

Explanation:

E2020

Answer:

The molecules in a solid are stuck in a specific structure or arrangement of atoms. The atoms still vibrate and the electrons fly around in their orbitals, but the entire atom will not change its position.

Answer: Diamonds were first discovered and mined in India over 2,400 years ago.

Explanation: Over time, diamonds were found in many other areas around the world, including many in Africa. In today's trade, Africa, Russia, Australia, and Canada produce the most diamonds.

~Wonderopolis

Answer:

Diamonds are formed when under the heat and pressure of the earth's gravity.  Diamonds have to be underground to be formed so they should be underground. Digging to Y11 is deep enough to find diamonds .

C. The concentrations of liquid water and water vapor are stable. it describes the fact that liquid water and water vapor are at equilibrium.

Hence, option (c) is correct. The concentration of liquid water and water vapor will become stable.

Learn more about water vapor:

https://brainly.com/question/17259832

Answer:

Move rapidly or move fast and farther apart. Hope this helps.

Answer: vibrate more rapidly

Explanation:

Answer:

No.4 is B No.5 is d

Explanation:

Answer:

Q 4: d

Explanation: this is all I can answer

Answer:

Dehydration of Sugar

Explanation:

Answer:

A

Explanation:

Answer:c

Explanation:

Answer:

The equilibrium concentration of gas A is 1.43 M

Explanation:

Here we have the reaction expressed as follows;

A + B → C + D and

The formula for equilibrium constant is therefore presented as follows;

[tex]K = \frac{[C]\times [D]}{[A]\times [B]}[/tex]

Where:

[C] = [D] = 2.3 M

[A] = [B]

K = 2.6

Hence, we have;

[tex]2.6 = \frac{2.3\times 2.3}{[A]\times [A]} = \frac{5.29}{[A]^2}[/tex]

[tex][A]^2= \frac{5.29}{2.6} = 2.03[/tex]

[A] = 1.43 M

The equilibrium concentration of gas A = 1.43 M.

Answer:

The equilibrium concentration of gas A = 1.43 M

Explanation:

First set up the equilibrium expression:

[tex]K = \frac{[C]\times [D]}{[A]\times [B]}[/tex]

The problem states that each product has a concentration of 2.3M at equilibrium, and that k=2.6

We also know that [A] and [B] are the same.

Since we are solving for [A] I'm going to change [A][B] to A²

[tex]2.6 =\frac{2.3^2}{A^2}[/tex]

Now we just need to solve for A²

A² = 5.29 / 2.6

A² = 2.0346

A = √2.0346

A = 1.43

Therefore, the equilibrium concentration of gas A = 1.43 M.

Answer:

B. ∠1 ≅ ∠2; alternate interior angles theorem  

Explanation:

Assume the diagram is like the one below.

The blue lines are parallel, and the red line is a transversal.

∠s 1 and 2 are between the parallel lines but on opposite sides of the transversal.

They are alternate interior angles.

Pairs of alternate interior angles are congruent.

A. is wrong. Alternate interior angles are congruent.

C. is wrong. Consecutive exterior angles are outside the parallel lines and on the same side of the transversal. They are like the two angles marked with a blue x. They are supplementary.

D is wrong. Consecutive exterior angles are supplementary.

Answer:

0.479 M or mol/L

Explanation:

So Molarity is moles/litres of solution...often written as M=mol/L

So here we are given grams of BaCl2 which we have to convert to moles. To convert to moles of BaCl2 we have to divide 63.2 g BaCl2 by molar mass of BaCl2 which is 208.23 g/mol so you get 63.2/208.23 = 0.3035 moles of BaCl2

Second step is converting the 634mL to litres by simply dividing by 1000 because we know 1 litre has 1000ml so 634/1000 = 0.634L

Now we just plug these guys in our molarity formula M=mol/L

M= 0.3035/0.634 = 0.479 M or mol/L

Answer:

Interestingly enough, I'm not getting

0.0341% w/v

either. Here's why.

Start by calculating the percent composition of chlorine,

Cl

, in calcium chloride, This will help you calculate the mass of chloride anions,

Cl

−

, present in your sample.

To do that, use the molar mass of calcium chloride, the molar mass of elemental chlorine, and the fact that

1

mole of calcium chloride contains

2

moles of chlorine atoms.

2

×

35.453

g mol

−

1

110.98

g mol

−

1

⋅

100

%

=

63.89% Cl

This means that for every

100 g

of calcium chloride, you get

63.89 g

of chlorine.

As you know, the mass of an ion is approximately equal to the mass of the neutral atom, so you can say that for every

100 g

of calcium chloride, you get

63.89 g

of chloride anions,

Cl

−

.

This implies that your sample contains

0.543

g CaCl

2

⋅

63.89 g Cl

−

100

g CaCl

2

=

0.3469 g Cl

−

Now, in order to find the mass by volume percent concentration of chloride anions in the resulting solution, you must determine the mass of chloride anions present in

100 mL

of this solution.

Since you know that

500 mL

of solution contain

0.3469 g

of chloride anions, you can say that

100 mL

of solution will contain

100

mL solution

⋅

0.3469 g Cl

−

500

mL solution

=

0.06938 g Cl

−

Therefore, you can say that the mass by volume percent concentration of chloride anions will be

% m/v = 0.069% Cl

−

−−−−−−−−−−−−−−−−−−−

I'll leave the answer rounded to two sig figs, but keep in mind that you have one significant figure for the volume of the solution.

.

Explanation:

Answer:

As the temperature of a sample of gas falls from 45.0ºC to 30.0ºC, its pressure falls to 300.

Explanation:

Answer:

The temperature of the cold water is lower than the warm one. So, when we put the hand in the warm from the cold water, our hand will absorb heat, causing the hand to feel hot. Thus, we can conclude that the more heat it absorbs, the more hotter it is. Whereas the more heat it releases, the colder it is.

Answer:

Greenhouse gases such as carbon dioxide and water vapor make an atmosphere around the earth and make less heat escape

Explanation:

Answer:

coal is made from compressed plant matter and how exactly did plants grow on the surface of an ocean. (as there is no land mass beneath the arctic.)

Explanation:

it would be like finding a fly in an ice cube to simplify it.

They were surprised to find coal in arctic because ordinarily coal was supposed to be found in warm or hot environments and not cold region like the arctic.

The arctic is located at the far northern part of the world which is characterized by its extreme cold weather.

A limited vegetation of plants such as grasses, mosses and lichens are found in this region irrespective of the extreme cold weather through out the year.

Coal is a type of fuel gotten from fossils and deposits of plant vegetation.

Scientist has discovered that continents do move over time through a process called continental drift. This is the reason why limited vegetaion is found in the arctic leading to the formation of coal.

Learn more here:

https://brainly.com/question/22647554

Answer:

CaC2 + 2H2O > C2H2 + Ca(OH)2

Explanation:

Count the amounts of Ca, C, H, and O, all separately on both sides.

Ca: 1                     Ca: 1

C: 2                      C:2

H: 2                      H: 4

O: 1                       O: 2

Now, your goal is to get both sides equal to each other by adding a 2 in front of H2O.

Answer:

When a clump of interstellar gas and dust is small and dense enough, gravity plays a decisive role in turning that material into a new star.

Explanation:

The process in stars that leads to the formation of the universe has been fusion and gravitational force.

The stars are hot massive clumps of gases. dust and clouds. The formation of stars with the fusion of mass has been given by the density stabilization for the gases and results in stars.

In space, the force acting has been the gravitational force. The higher the mass of the object stronger has been the force that results in the formation of galaxies and the universe.

The stars with the increase in the mass from the fusion of dust and clouds result in increased gravitational force and thereby the formation of planets and other bodies.

Thus, the process in stars that leads to the formation of the universe has been fusion and gravitational force.

For more information about the galaxy, refer to the link:

https://brainly.com/question/24836631

Answer:

The correct ones are:

|

|||

|V

V

Explanation:

Answer:

1 for and 5

Ex

Study island