Answer:1. Introduction
The main air pollutants are represented by gases forms, particles in suspension, different ionizing radiation and noise.
The gases forms are: oxidized and reduced forms of carbon (CO2, CO, CH4), of nitrogen (NO2, NO, N2O4, NH3, NH4+), SO2, O3, C6H6 vapours, Hg, volatile phenols, Cl2, etc.
The particulate forms are: PM10 and PM2.5 particulate matter, heavy metals with toxic effect (Pb, Ni, Cd, As), polycyclic aromatic hydrocarbons PAHs, etc.
Atmospheric pollutants have a negative effect on the plants; they can have direct toxic effects, or indirectly by changing soil pH followed by solubilization of toxic salts of metals like aluminum. The particulate matters have a negative mechanical effect. They cover the leaf blade reducing light penetration and blocking the opening of stomata. These impediments influence strongly the process of photosynthesis which rate declines sharply.
Explanation:
Answer:
A More air pollution because there are fewer trees to take in carbon dioxide
C Fewer birds and other wildlife because they have fewer places to live
Explanation:
I took the test on A P E X
3. All the deer in Horry County represent which of the following?
species
biome
population
community
Answer:
community
Explanation:
Answer:
The correct answer is population. I took the test and got it right.
How many gallons of water would be in a container that is 256 millimeters X 20 inches X.045 meter.
The mass of the nails and copper sulfate solution used in this investigation was 250g The mass of the copper and tran sulfate solution produced in this
nvestigation would be
250g
Answer:
He it would because 250g is the answer is to 256g
Explanation:
What is the charge of an electron?
A-negative
B-neutral
C-positive
D-none of these
If I have one mole of sulfur, how many grams would it weigh?
Answer:
32.06 grams
Explanation:
One mole of sulfur is equal to 32.06 grams of sulfur.
Answer:ok
Explanatio
heres the answer 32.065 grams because 1 mole is equal to 1 moles Sulfur
what is neucler fission
Answer:
Neucler fission is a radioactive decay process. The nucleus of an atom splits into two.
The phase that occurs beyond the critical point is:
A. Liquid
B. Solid
C. Gas
D. All of the above
Answer:
C. Gas
Explanation:
A supercritical fluid occurs beyond the temperature of critical point, wherein the state matter transitions from liquid to gaseous phase interchangeably. Whereas, triple point occurs when all three states of matter: solid, liquid nd gas; coexist.
Hence the answer to the question is Gaseous phase/
I hope you found this helpful.
5. Geologists think that the inner and outer cores of Earth consist of
iron and nickel.
Answer:
is this true/false? if so its true.
Explanation:
Balance the following equations:C(s) +CO2(g)- CO(g)
Answer:
C(s)+CO₂(g)→2CO(g)
Explanation:
Basically you’re adding the compounds until they’re equal on both sides
Can y’all answer these for me I’m in a hurry so I don’t fail this class
Answer:
what I can't understand what you're saying lol
Explanation:
be my friend lol
btw follow me on my another account (sarivigakarthi)...... plz
How many molecules of water of water are in a 821.3 g sample
Answer: 2.744 x 1025 molecules
Marble chips react with dilute hydrochloric acid to produce carbon dioxide gas. The rate of this reaction can be changed by changing the size of marble chips.
Describe experiments to investigate what effect using smaller marble chips has on the rate of this reaction.
Answer:
See explanation
Explanation:
We know that surface area is an important determinant factor in the study of reaction rate. This is the reason why finely divided marble chips react faster than lumps of marble in the reaction between marble chips and dilute HCl.
Now imagine that i have a lump of marble and i have finely divided marble. Then i also have a solution of 0.5 M dilute HCl. If i introduce 1g of the lump of marble into 250 ml solution of the 0.5 M HCl in one beaker and introduce 1g of finely divided marble into another 250 ml solution of 0.5 M HCl in a separate beaker, we will notice that the finely divided marble chips reacts faster as evidenced by the quicker effervescence of CO2 gas from the later compared to the former.
Hence, smaller marble chips reacts faster with dilute HCl than a lump of marble.
Answer:
yes the above given answer is absolutely correct I agree with u man on the above.
The combination of all the forces on an object is called?
Answer:
net force
Explanation:
Astronomers send probes to other planets to take pictures of their surfaces. An astronomer thinks that briny water flows on Mars because he noticed certain features in one picture of Mars. Which method did the astronomer
use to form this hypothesis?
1.reading scientific literature
2.making careful observations
3. analyzing a natural experiment
4. conducting a controlled experiment
Answer:
Its obviously 2 or 3 and since 2 isn't a method its 3
Explanation:
There you have it
To solve this we must be knowing each and every concept related to planet. Therefore, the correct option is option C among all the given options.
What is planet?A planet must accomplish three things: circle a star, be large sufficient to have sufficient gravity to compel a spherical form, and be large sufficient that its gravity swept away any similar-sized objects near its orbit.
Our solar system's planets did not arise out of nothing. The sun didn't either. They were all engulfed in a massive gas and dust cloud. Gravity gathered a lot of material inside the center to form the sun.
Astronomers send probes to other planets to take pictures of their surfaces. An astronomer thinks that briny water flows on Mars because he noticed certain features in one picture of Mars. Analyzing a natural experiment is a method to form this hypothesis.
Therefore, the correct option is option C.
To know more about planet, here:
https://brainly.com/question/29765555
#SPJ2
The CO2 that builds up in the air of a submerged submarine can be removed by reacting it with sodium peroxide. 2 Na2O2 (s) + 2 CO2 (g) → 2 Na2CO3 (s) + O2 (g)
If a sailor exhales 150.0 mL of CO2 per minute at 20oC and 1.02 atm, how much sodium peroxide is needed per sailor in a 24 hr period?
Answer: The sodium peroxide needed per sailor in a 24 hr period is 674 grams.
Explanation:
According to ideal gas equation:
[tex]PV=nRT[/tex]
P = pressure of gas = 1.02 atm
V = Volume of gas = 150.0 ml = 0.15 L
n = number of moles of carbon dioxide = ?
R = gas constant =[tex]0.0821Latm/Kmol[/tex]
T =temperature =[tex]20^0C=(20+273)K=293K[/tex]
[tex]n=\frac{PV}{RT}[/tex]
[tex]n=\frac{1.02atm\times 0.15L}{0.0821 L atm/K mol\times 293K}=0.006moles[/tex]
[tex]2Na_2O_2(s)+2CO_2(g)\rightarrow 2Na_2CO_3(s)+O_2(g)[/tex]
According to stoichiometry:
2 moles of carbon dioxide require = 2 moles of sodium peroxide
Thus 0.006 moles carbon dioxide require= [tex]\frac{2}{2}\times 0.006=0.006[/tex] moles of sodium peroxide
Mass of sodium peroxide needed for 24 hour=[tex]moles\times {\text {Molar mass}}=0.006mol\times 78g/mol\times 24\times 60=674g[/tex]
Thus sodium peroxide needed per sailor in a 24 hr period is 674 grams.
The amount (in grams) of sodium peroxide needed per sailor in a 24 hr period is 673.92 g
Determination of the mole of CO₂Volume (V) = 150 mL = 150 / 1000 = 0.15 L Temperature (T) = 20 °C = 20 + 273 = 293 KPressure (P) = 1.02 atmGas constant (R) = 0.0821 atm.L/Kmol Mole of CO₂ (n) =?Using the ideal gas equation, we can obtain the mole of CO₂ as follow:
n = PV / RT
n = (1.02 × 0.15) / (0.0821 × 293)
n = 0.006 mole
How to determine the mole of Na₂O₂ required2Na₂O₂ + 2CO₂ → 2Na₂CO₃ + O₂
From the balanced equation above,
2 moles of CO₂ required 2 moles of Na₂O₂.
Therefore,
0.006 mole of CO₂ will also require 0.006 mole of Na₂O₂.
How to determine the mass of Na₂O₂ required Mole of Na₂O₂ = 0.006 mole Molar mass of Na₂O₂ = (23×2) + (16×2) = 78 g/mol Mass of Na₂O₂ =?Mass = mole × molar mass
Mass of Na₂O₂ = 0.006 × 78
Mass of Na₂O₂ = 0.468 g per minute
Mass of Na₂O₂ required for 24 h = 0.468 × 24 × 60 = 673.92 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
The nucleus of a fluorine atom has a charge of?
A. +19
B. 0
C. +9
D. +1
Answer: B
Explanation: A fluorine atom has nine protons and nine electrons, so it is electrically neutral. (neutral =0)
The nucleus of a fluorine atom has a charge of zero as the atom has equal number of positive and negative charges.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/29695801
#SPJ6
Consider the double replacement reaction given below: HgNO3(aq) + KBr(aq) → HgBr (??) + KNO3(??)The state of matter for HgBr would be
Answer: The state of maater for HgBr is solid.
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]HgNO_3(aq)+KBr(aq)\rightarrow HgBr(s)+KNO_3(aq)[/tex]
PLZ HELP ME IM FAILING!
Everything you need to know about the question is on the photo
Answer:
C. NH₄Cl
Explanation:
The compound with the element ratio 1 : 4 : 1 from the given choices is NH₄Cl.
An element is a pure substance made up of distinct number of atoms. Elements are unique and are different from other elements because of the nature of their atoms.
We often delineate an element using chemical symbols.
In the compound NH₄Cl;
There are 3 elements:
Number of atoms
N 1
H 4
Cl 1
Which instrument is used to measure mass?
Answer:
Balance
Explanation:
hope i helped
What is the percent yield of this reaction if 22.o g of Mgl2 is produced by the reaction of 25.0 g of Mg with 25.0 g of l2?
% yield = 80.719
Further explanationGiven
22.0 g of Mgl₂
25.0 g of Mg
25.0 g of l₂
Required
The percent yield
Solution
Reaction
Mg + I₂⇒ MgI₂
mol Mg = 25 g : 24.305 g/mol = 1.029
mol I₂ = 25 g : 253.809 g/mol = 0.098
Limiting reactant = I₂
Excess reactant = Mg
mol MgI₂ based on I₂, so mol MgI₂ = 0.098
Mass MgI₂ (theoretical):
= mol x MW
= 0.098 x 278.114
= 27.255 g
% yield = (actual/theoretical) x 100%
% yield = (22 / 27.255) x 100%
% yield = 80.719
How do I balance "Lithium hydroxide + hydrogen acetate --> lithium acetate + water"
Answer:
LiOH+CH3COOH=C2H3LiO2+H2O balanced equation
Explanation:
lithium hydroxide-> LiOH
hydrogen acetate->CH3COOH
lithium acetate->C2H3LiO2
water->H2O
LiOH+CH3COOH=C2H3LiO2+H2O
Li=1,O=3,H=5,C=2 --> Li=1,O=3,H=5,C=2
the two sides have same numbers so it is balanced.
10
If velocity is positive, which would most likely yield a negative acceleration?
O O OO
A final velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.
Answer:
An initial velocity that is faster than a final velocity
Explanation:
The relationship between velocity and acceleration is given as follow;
Acceleration = Change in velocity / Time
Change in Velocity = Final Velocity - Initial Velocity
From the formular, time is not able to affect the sign of the acceleration.
A negative acceleration is also referred to as deceleration and this occurs when there is a drop in velocity.
A drop in velocity occurs when the initial velocity is faster than the final velocity.
1. Which of these is NOT found in the nucleus of an atom?
neutrons
protons
electrons
the mass of the atom
Answer:
Electrons
Explanation:
Answer:
Electrons are not found in the nucleus for they are orbiting the atom.
Which of the following is true about homogeneous mixtures?
They consist of two or more phases; They are always liquids; They are known as solutions; They have compositions that never vary
Answer:
Option 3: They are known as solutions
Explanation:
Examples of homogenous mixtures include:
soapy watertea or coffee that's breweda mixture of water and alcoholbloodairquartznitrogenI hope this helps :)
66 A student wants to design a controlled experiment to solve the following problem: When placed in a freezer, will hot water or cold water reach 0°C faster?
The student plans to place two containers with equal masses of water (one hot and one cold) in the same freezer in the classroom.
a List three conditions the student should keep constant for the hot-water and cold-water setups when planning this experiment. [3]
b For each condition you name, give a scientific reason why the condition needs to be the same for both the hot-water and cold-water setups
Answer:
Explanation:
is guiZ
5.4 g of Aluminium reacts with 300 mL of 0.2 mol/L hydrochloric acid solution. a. Write equation for the reaction taking place. b. Specify which reactant is limiting and which reactant is excess. c. Find volume of the gas collected at S.T.P d. How many grams of salt are produced at the end of the reaction? e. How many grams of the excess reactant are left ate the end of the reaction? Given: Al=27 , H=1 , Cl=35.5
HCl as a limiting reactant
volume of the gas(H₂)= 0.672 L
mass of salt : =2.67 g
mass of excess left : 4.86 g
Further explanationGiven
5.4 g Al
300 mL of 0.2 mol/L HCl
Required
limitng reactants
volume of the gas(H₂)
mass of salt
mass of excess left
Solution
Limiting reacttantReaction
2Al + 6HCl → 2AlCl₃ + 3H₂
mol Al = 5.4 g : 27 g/mol = 0.2
mol HCl = 0.3 L x 0.2 mol/L = 0.06
mol : coefficient of reactants :
Al = 0.2 : 2 = 0.1
HCl = 0.06 : 6 = 0.01
HCl as a limiting reactant(smaller ratio)
Al as an excess reactant
volume of H₂
mol H₂ = 3/6 x mol HCl = 3/6 x 0.06 = 0.03
volume (STP : 1 mol=22.4 L) :
= 0.03 x 22.4 L
= 0.672 L
mass of salt(AlCl₃)
mol AlCl₃ = 2/6 x mol HCl = 2/6 x 0.06 = 0.02
mass AlCl₃ :
= mol x MW
= 0.02 x 133.5
=2.67 g
mass of excess(Al) left
mol (reacted) : 2/6 x mol HCl = 2/6 x 0.06 = 0.02
mol (unreacted) : 0.2 - 0.02 = 0.18
mass = 0.18 x 27 g/mol = 4.86 g
what is the mass of 5.8 moles of H2S
Answer:
Mass = 197.78 g
Explanation:
Given data:
Number of moles = 5.8 mol
Mass of H₂S = ?
Solution:
Formula:
Mass = number of moles × molar mass
molar mass of H₂S = 34.1 g/mol
by putting values,
Mass = 5.8 mol × 34.1 g/mol
Mass = 197.78 g
Thus, 5.8 moles of H₂S have 197.78 g mass.
DESCRIBE the five types of chemical reactions
(Synthesis, Decomposition, Single displacement, Double displacement, Combustion)
The study of chemicals is called chemistry.
When two elements react together to form a new compound is called a reaction.
When two-element join together to form a new compound is called synthesis.
[tex]C + O_2 --> Co_2[/tex]
The breakdown of a compound into two different elements is called decomposition.[tex]H_20 ----> H_2 + O_2[/tex]
The substitute of one element in the compound is called single displacement.[tex]Fe + H_2So_4---> FeSo_4+ H_2[/tex]
The substitute of two-element in the compound is called double displacement.[tex]BaCl + H_2So_4 + ---> BaSo_4 + HCl[/tex]
The burning of the element in the presence of oxygen is called a combustion reaction.[tex]C + O_2 ---> CO_2[/tex]
Hence, the answer is mentioned above.
For more information, refer to the link:-
https://brainly.com/question/12985618
True or false for these!!!! Please help
What might the student have done that caused this
error? List all possible causes.
Answer:
The capillary tube was too close to the bottom of the beaker.
The ruler may have moved.
Water got into the capillary tube.
The temperature was not allowed to equilibrate in the 2-4 minutes.
Explanation:
