arrange the metals sodium,copper, and magnesium in the decreasing order of their reactivity​

Answer:

No it is not an exception to this principle

Explanation:

Work was carried out by this compressor to reduce the entropy of ice. What this means is that the ice gave out heat which is as a result  of the work that the compressor was putting in. there are violations of this principle

the entropy principle has that the entropy of the universe is always going to be more than 0 (system + surrounding). in this question, the that of the system is negative while that of the surrounding is positive.  As the refrigerator was cooling the water, the air outside was getting heated.  Outside this refrigerator, the gain in entropy is more than the entropy that was lost in the water.

the entropy of the universe once again is more than 0.

Answer:

Explanation:

Molecular FormulaC4H7O2

Average mass87.098 Da

Monoisotopic mass87.045151 Da

Explanation:

here's the answer to your question

The quantum numbers are defined as the set of four numbers with the help of which we can get complete information about the electrons in an atom. The fourth quantum number is the spin quantum number. Here ms for 3p electron in 'Al' is ms = + 1/2. The correct option is B.

The quantum number which describes the spin orientation of the electron is defined as the spin quantum number. Since the electron can spin only in two ways, clockwise and anti-clockwise, the spin quantum number can have either the value +1/2 or -1/2 depending upon the direction of spin.

Thus for 3p electron in 'Al' ,ms is option B.

To know more about spin quantum number, visit;

https://brainly.com/question/28902081

#SPJ7

Answer:

the entropy change for the system when 1.58 moles of CaCO3(s) react at standard conditions is 253.748 J/K

Explanation:

Given the data in the question;

CaCO₃(s)       →     CaO(s)     +     CO₂(g)  

1.58 moles        1.58 moles     1.58 moles

Since 1 mole of CaCO₃ gives 1 mole of CaO and 1 mole of CO₂

Thus, 1.58 mole of CaCO₃ gives 1.58 moles of CaO and 1.58 moles of CO₂.

Now,

At 298 K, standard entropy values are;

ΔS° ( CaCO₃ ) = 92.9 J/mol.K

ΔS° ( CaO )     = 39.8 J/mol.K

ΔS° ( CO₂ )      = 213.7 J/mol.K

So,

ΔS°[tex]_{system[/tex] = ∑ΔS°( product ) - ∑ΔS°( reactant )

ΔS°[tex]_{system[/tex] = [ ΔS°(CaO) + ΔS°( CO₂ ) ] - ΔS°( CaCO₃ )

we substitute

ΔS°[tex]_{system[/tex] = [ 39.8 J/mol.K + 213.7 J/mol.K ] - 92.9 J/mol.K

ΔS°[tex]_{system[/tex] = 160.6 J/mol.K

i.e, for 1 mol CaCO₃, ΔS°[tex]_{system[/tex] = 160.6 J/mol.K

Now, for 1.58 mol CaCO₃,

ΔS°[tex]_{system[/tex] = 1.58 mol × 160.6 J/mol.K

ΔS°[tex]_{system[/tex] = 253.748 J/K

Therefore, the entropy change for the system when 1.58 moles of CaCO3(s) react at standard conditions is 253.748 J/K

Answer:

A) greater than the Ksp

Explanation:

Given a solid ionic compound AB, it dissociates in water into its ions, as follows:

AB(s) → A⁺(aq) + B⁻(aq)

At equilibrium, the product of the concentrations of the ions is constant, and it is called Ksp:

AB(s) ⇄ A⁺(aq) + B⁻(aq)

Ksp = [A⁺][B⁻] ⇒ (concentrations at equilibrium)

Upon mixing the reagents for the formation of AB, the compound will precipitate if the initial ion product (Q) is greater than the Ksp. If Q is equal to Ksp, the ions are at equilibrium with the solid compound AB, and if is it less than the Ksp, the ions are soluble and no solid AB is formed yet.

Q = [A⁺][B⁻] ⇒ (initial concentrations)

Q = Ksp ⇒ saturated solution (at equilibrium)

Q< Ksp ⇒ unsaturated solution (ions are soluble)

Q> Ksp ⇒ precipitation of solid compound.

Therefore, the correct option is A) greater than the Ksp

Answer:5.17g of Co2

Explanation:

Answer:

3-

Explanation:

Sodium aurothiosulfate is a salt with the formula Na₃Au(S₂O₃)₂. The cation of the salt is sodium ion, and the anion is aurothiosulfate ion. We can determine the charge of the aurothiosulfate ion, considering that the sum of the positive and negative charges must be equal to the charge of the compound, which is zero.

3 × Na⁺ + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

3 × +1 + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

Au(S₂O₃)₂ⁿ⁻ = 3-

Answer:

ATP hydrolase

Explanation:

Enzymes are biological catalysts which perform diverse functions in the body. Enzymes are specific in their mode of action because an enzyme fits into its substrate as a key fits into a lock.

The particular enzyme that catalyzes the breakdown of ATP to ADP is ATP hydrolase. The phosphate released by the action of this enzyme is used in the phosphorylation of other compounds thereby making them more reactive.

Answer:

925.66 J/K

Explanation:

Applying,

Q = CΔt............. Equation 1

Where Q = amount of heat, C = heat capacity of the calorimeter, Δt = rise in temperature.

make C the subject of the equation

C = Q/Δt.............. Equation 2

From the question,

Given: Q = 3.86 kJ = 3860 J, Δt = 4.17K

Substitute into equation 2

C = 3860/4.17

C = 925.66 J/K

Answer:

[tex]{ \tt{1 \: mole = 6.02 \times {10}^{23} \: molecules }} \\ { \tt{6.0 \: moles = (6 \times 6.02 \times {10}^{23}) \: molecules }} \\ = { \bf{3.612 \times {10}^{24} \: molecules}}[/tex]

Explanation:

The given reaction is the combustion of CH3NO2.

The balanced chemical equation of the reaction is:

[tex]4CH_3NO_2+ 7O_2 ->4 CO_2+4NO_2+6H_2O[/tex]

So, from the balanced chemical equation, it is clear that:

4 moles of CH3NO2 --- 7 moles of oxygen gas is required.

then,

for 17.10 moles of CH3NO2 the following number of moles of oxygen is required.

[tex]The number of moles of O_2 required=17.10 mol. x \frac{7 mol}{4 mol} \\=29.925 mol[/tex]

Answer is :

29.9 mol of oxygen gas is required.

Answer:

Precipitation

Explanation:

Let's consider the balanced chemical equation between barium acetate and sodium carbonate to form barium carbonate and sodium acetate.

Ba(C₂H₃O₂)₂(aq) + Na₂CO₃(aq) → BaCO₃(s) + 2 NaC₂H₃O₂(aq)

Both products and reactants are salts. But, among the products, barium carbonate is solid. This allows us to classify it as a precipitation reaction.

Answer:

No correct answer listed. See explanation for defense.

Explanation:

Given

C: 40.92% => 40.92g/100wt => (40.92/12)moles C = 3.41 moles O

H:   4.58% =>   4.58g/100wt =>      (4.58/1)moles H = 4.58 moles H

O: 54.50% => 54.5g/100wt =>     (54.5/16)moles O = 3.41 moles O

Empirical ratio => C : H: O => (3.41/3.41) : (4.58/3.41) : (3.41/3.41) => 1 : 1.34 : 1

=> C : H : O => 3(1 : 1.34 : 1) => 3 : 4 : 3 => Empirical Formula C₃H₄O₃

Molecular Weight = Empirical Formula Wt x N

         176.12          =           88  x  N

N = whole number multiple of empirical formula = 176.12/88 = 2

∴ Molecular Formula => (C₃H₄O₃)₂ => C₆H₈O₆

Note => Only ionic compounds (salts) have subscripts reduced to lowest whole number ratios. Molecular compounds as C₆H₈O₆ are not reduced to lowest whole number ratios. Therefore, there is no correct answer in the answer choice list for the 'Molecular Formula'. Doc :-)

Answer:

7822 kJ

Explanation:

The formula for acetone is: CH3COCH3

From the standard bond energy(enthalpy):

C - H bond = 412

C - C bond = 348

C = O bond = 743

From the structure of an acetone

C is bonded to H in six places;

so, for  C- H bond = 6 × 412 = 2472

C is only bonded to two other carbon atoms

For C - C bond = 2 × 348 = 696

Carbon is only doubly bonded to an oxygen atom

For C = O bond = 1 × 743 = 743

∴

The total net energy bond in a mole = (2472 + 696 + 743) kJ/mol

= 3911 kJ/mol

Finally, in 2 moles of acetone, the required amount of energy will be:

= 3911 kJ/moles × 2 moles

= 7822 kJ

Answer:

From least polar covalent to most polar covalent;

S-I< Br-Cl < N-H< Te-O

From most ionic to least ionic

Cs-F> Sr-Cl> Li- N> Al-O

Explanation:

Electro negativity refers to the ability of an atom in a bond to attract the shared electrons of the bond towards itself.

Electro negativity difference between two atoms is a key player in the nature of bond that exists between any two atoms. A large difference in electron negativity leads to an ionic bond while an intermediate difference in electro negativity leads to a polar covalent bond.

Based on electro negativity differences, the bonds in the answer have been arranged in order of increasing polar covalent nature or decreasing ionic nature.

Answer:

because of it less attraction and its neutral position

Answer:

The existence of isotopes relates to the number of neutrons within the nuclei of an element because isotopes contain the same amount of protons (based on what element they are) but different number of neutrons in their nuclei. Because they have a different amount of neutrons, than the original element

,they also have a different atomic mass.

Explanation:

hope it helps!

Answer:

a. 7278 K

b. Kc = 4.542 × 10⁻³¹

Explanation:

a.

The reaction is spontaneous when ΔG° < 0. We can calculate ΔG° using the following expression.

ΔG° = ΔH° - T × ΔS°

Then, the reaction will be spontaneous when,

ΔH° - T × ΔS° < 0

T > ΔH°/ΔS

T > (180.5 × 10³ J/mol)/(24.80J/mol⋅K)

T > 7278 K

b.

First, we will calculate ΔG° at 25 °C (298 K)

ΔG° = ΔH° - T × ΔS°

ΔG° = (180.5 × 10³ J/mol) - 298 K × (24.80J/mol⋅K) = 1.731 × 10⁵ J/mol

Then, we will calculate the equilibrium constant (Kc) using the following expression.

ΔG° = - R × T × ln Kc

-ΔG°/R × T =  ln Kc

-(1.731 × 10⁵ J/mol)/(8.314 J/mol.K) × 298 K =  ln Kc

Kc = 4.542 × 10⁻³¹

Answer:

C) Both will require the same amount because the concentrations are equal.

Explanation:

The pH of a solution is defined as:

pH = -log [H+]

This H+ is the ion that reacts with OH- (From NaOH) as follows:

H+ + OH- → H2O

When all H+ reacts, we can say the solution was neutralized.

Now, as both, the solution with the weak acid and the solution with strong acid have the same pH, we can say that their [H+] is the same. Assuming the volume of both solutions is the same:

Both will require the same amount because the concentrations are equal.

Answer:

false

Explanation:

Explanation:

here are the answers for your questions

I basically converted the given grams to moles, and then multiplied that by the product-to-reactant ratio in the equation, and then convert that to grams

Answer:

Explanation:

1.

The reaction can be represented by the equation: Zn + 2 HCl -> ZnCl2 + H2

From the equation, molar ratio of Zn and ZnCl2 is 1:1.

Molar mass of Zn = 65.38

Molar mass of ZnCl2 = 65.38 + 35.45*2 = 136.28

So 6.0 grams of Zn will produce 6 / 65.38 * 136.28 = 12.5 grams

2.

As the only other product is copper (II) oxide, the reaction can be represented by the equation: CuCO3 -> CuO + CO2

From the equation, molar ratio of CuCO3 and CuO is 1:1.

Molar mass of CuCO3 = 123.55

Molar mass of CuO = 79.55

So 45.0 grams of CuCO3 will produce 45 / 123.55 * 79.55 = 28.96 grams

Answer:

Covalent bonding occurs when pairs of electrons are shared by atoms.

Explanation:

Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.

Answer:

The answer is "120 C  and 109.5 C".

Explanation:

The carbon atom is hybridized by sp2. This angle of connection thus is 120 degrees. Alkene, specifically both carbons which are in the C=C, are an instance of carbon with sp2 hybridized atom's nucleus. Those three hybridized orbits were linked to certain other atoms forming sigma connections. Its remaining 2p orbital makes a pi link with 2p orbit by the side-overlap of all the other carbon. O is hybridized inside the [-OH] Group. The optimal bond angle therefore is [tex]109.5^{\circ}[/tex].

[tex]a= 120 \ C\\\\b= 109.5 \ C[/tex]

In a first order reaction 40% of reactant gets converted into product in 30 minutes. The time would it require to convert 75%  into product is 81.57 minutes.

First order reaction is defined as a chemical reaction in which the concentration of just one ingredient directly affects the pace of the reaction. If the first-order reactant concentration is doubled in these reactions, the reaction rate will likewise double. Chemical reactions classified as first order kinetics have rates of reaction that depend on the molar concentration of one component.

First order reaction = 2.303 / t log a / (a-x)

k = 2.303 / 30 log 100 (100 - 40)

k = 0.0767 log 1.66

k = 0.017 min⁻¹

The time required to convert 75 % product

t = 2.303 / 0.017 log 100 (100 - 75)    

t = 135.5 log 4

t = 135.5 x 0.602

t = 81.57 minutes

Thus, in a first order reaction 40% of reactant gets converted into product in 30 minutes. The time would it require to convert 75%  into product is 81.57 minutes.

To learn more about first order reaction, refer to the link below:

https://brainly.com/question/1769080

#SPJ2

Answer:

The pH of the solution is 12.78.

Explanation:

The pOH (or potential OH) is a measure of the basicity or alkalinity of a solution. The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH- ions:

pOH= - log [OH-]

On the other side, Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume. Molarity is calculated as:

[tex]Molarity= \frac{number of moles}{volume}[/tex]

Molarity is expressed in units: [tex]\frac{moles}{liter}[/tex]

In this case, the solution is prepared by mixing 100 ml (equal to 0.1 L, where 1000 mL = 1 L) of Ca(OH)₂ 0.020 M with 50 ml (equal to 0.05 L) of 0.100 M NaOH. Then, Ca(OH)₂ and NaOH are strong bases, so they dissociate completely. In the case of the first hydroxide, for each mole of Ca(OH)₂,

form two moles of OH-. In the case of sodium hydroxide, for each mole of hydroxide, one mole of OH- is formed. So, taking into account the definition of molarity, the number of moles of OH- that each hydroxide contributes to the solution is calculated as:

From Ca(OH)₂: 0.1 L* 0.02 M*2 = 0.004 moles

From NaOH: 0.05 L* 0.1 M= 0.005 moles

So, the amount of total moles of OH- is the sum that each hydroxide contributes to the solution: 0.004 moles + 0.005 moles= 0.009 moles

On the other hand, volumes are additive. Then: 0.1 L +  0.05 L= 0.15 L

Replacing in the definition of molarity the number of moles and the volume:

[tex][OH-]=\frac{0.009 moles}{0.15 L}[/tex]

Solving:

[OH-]= 0.06 [tex]\frac{moles}{liter}[/tex]

Replacing in the definition of pOH:

pOH= - log 0.06

pOH= 1.22

The following relationship can be established between pH and pOH:

pH + pOH= 14

Being pOH= 1.22 and replacing:

pH + 1.22= 14

pH= 14 - 1.22

pH= 12.78

The pH of the solution is 12.78.

Answer:

γ−Hydrogen is easily replacable during bromination reaction in presence of light , because Allylic substitution is being preferred.

Explanation:

that's all

γ−Hydrogen is easily replacable during bromination reaction in presence of light , because Allylic substitution is being preferred.

Answer:

B. Aromatic

Explanation:

Functional groups are groups that differentiate a specific organic compound from others. A functional group determines the chemical property of the compound that possesses it.

For example, just like alkene and alcohol functional groups have characteristics double bond (=) and hydroxyl (OH) group respectively, the image in the attachment of this question has a BENZENE RING at the core of its structure, hence, the organic compound can be regarded to have an AROMATIC FUNCTIONAL GROUP.

Answer:

(B) aromatic

Explanation:

A step by step explanation

Explanation:

I have no idea about this

Answer:

The answer Is B.....False

Answer:

The Hazmat products warnings or labels allowed in fc include:

1. Fully Regulated Aerosol Placard

2. Fully Regulated Flammable Solid Placard  

3. Fully Regulated Flammable  

4. Lithium-Ion/Metal Battery label

Explanation:

Hazmat products (including explosives, flammable liquids and solids, and gases, etc.) are classified as dangerous substances and materials that pose a risk to people during their storage, handling, or transportation.  The requirement for this Hazmat classification is to show that the identified products require diligence, carefulness, and alertness in handling, transporting, and storing them.  The reason for this is that mishaps can occur.  Some of them can also cause fire outbreaks.

Answer:

1.59 M

Explanation:

What is the concentration (M) of CH₃OH a solution prepared by dissolving 11.7 g of CH₃OH sufficient water to give exactly 230 mL of solution?

Step 1: Given data

Step 2: Calculate the moles corresponding to 11.7 g of CH₃OH

The molar mass of CH₃OH is 32.04 g/mol.

11.7 g × 1 mol/32.04 g = 0.365 mol

Step 3: Calculate the molarity of the solution

M = moles of solute / liters of solution

M = 0.365 mol / 0.230 L = 1.59 M