Answer:
i think torque is the answer not confirmed
URGENT
A river flows toward 90°. Mark, a riverboat
pilot, heads the boat at 297º and is able to go
straight across the river at 6.0 m/s.
a. What is the velocity of the current?
b. What is the velocity of the boat as seen
from the river bank?
If the boat's speed is s, and the river's speed is r, and the boat is traveling east (0 degrees),
(0,r) + (s cos297,s sin297) = (6,0)
now just solve for r and s.
Pls mark me as brainliest
How can we measure electromotive force of a battery illustrated answer with the help of circuit diagram
Answer:
the emf of the cell can be determined by measuring the voltage across the cell using a voltmeter and the current in the circuit using an ammeter for various resistances.
the torque produced in a body is equal to the product of one of the force and the _______
(a) couple
(b) force
(c) like parallel force
(d) couple arm
What's energy band theory???
Answer:
Energy band theory is a basis for describing processes and effects in solid crystals under electromagnetic field impact.
Explanation:
Single atoms have a discrete energy spectrum, which means they can occupy only discrete energy levels. Part of these energy levels are filled with electrons in a non-excited condition. Part of these levels can be occupied only when electrons are excited.
Which is an outer planet?
Answer:
pluto
Explanation:
Dwarf because it is very minut
Answer:
I think Saturn.
Explanation:
I think the inner planets are Mercury, Venus, Earth and Mars whereas the outer ones are Jupiter, Saturn, Uranus and Neptune.
.
What is the equation for work?
Work = force / distance
Work = force - distance
Work = force + distance
Work = force * distance
Answer:
Work = F X D
Explanation:
Work (J) equals Force (N) multiplied by Distance (M)
The gravitational force of the two objects is 6.67x10-11N. Explain this statement.
Answer:
it means that the force of attraction between two object in gravitation is 6.67×10-11N
It means that the force of attraction between two object in gravitation is 6.67×10-11N.
What is the formula of mass in gravitational force?The formula is g = GM/r2, Where M is the mass of the Earth, r is the radius of the Earth (or distance between the center of the Earth and you, standing on its surface), and G is the gravitational constant. G (without the subscripts) is the gravitational constant, and c is the speed of light.
What is the gravitational force between two objects?The gravitational force between two objects is proportional to their masses and inversely proportional to the square of the distance between their centers. joining the two centers of masses.
Learn more about gravitational force here: brainly.com/question/13010127
#SPJ2
A girl is travelling on her bike at a speed 2.59 m/s. If the
girl and her bike have a kinetic energy of 190 J, what is
the combined mass of the girl and her bike? Show all
your work
Answer:
Mass, m = 146.72 kilograms
Explanation:
Given the following data;
Kinetic energy = 190 J
Velocity = 2.59 m/s
To find the combined mass of the girl and her bike;
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
K.E = ½mv²
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
190 = ½*m*2.59
Cross-multiplying, we have:
380 = 2.59m
Mass, m = 380/2.59
Mass, m = 146.72 kilograms
Two rams run toward each other. One ram has a mass of 44 kg and runs south with a speed of 6 m/s, while the other has a mass of 50 kg and runs north with a speed of 3 m/s. What will the momentum of the system made up of the two rams be after they collide? Assume the total momentum of the system is conserved.
A. 114 kg-m/s south
B. 414 kg-m/s south
C. 414 kg m/s north
D. 114 kg-m/s north
you are pedaling forward on your bike. which of the following would decrease your acceleration?
A. A decrease in your mass
B. A increase in your applied force
C. An increase in your mass
D. An increase in your speed
Pedaling forward over the bike with the increase in your applied force would decrease your acceleration. Thus, option B is correct.
What is acceleration?Acceleration is define as the rate at which velocity changes with time, in terms of both speed and direction. The equation for acceleration is:
a=F/m
where, a = acceleration,
F = force applied
m = mass of the object
The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object.
As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.
Therefore, if you are pedaling forward on your bike then a increase in your applied force would decrease your acceleration. Thus, option B is correct.
Learn more about acceleration here:
https://brainly.com/question/980919
#SPJ5
Answer:
I just did it. A is right.
Explanation:
Select the definition that best describes the term “strain.”
A measure of the degree of plastic deformation that a material can withstand before failure.
The elongation (or change in length) of a specimen divided by the original length, sometimes referred to as percent elongation.
Indication of how much energy a material can absorb before failure.
Also known as the modulus of elasticity, this is the constant of proportionality as defined by Hooke’s Law.
The instantaneous force applied to a specimen divided by the cross-sectional area.
Answer:
The elongation (or change in length) of a specimen divided by the original length, sometimes referred to as percent elongation.
Explanation:
Strain is defined mathematically as follows .
strain = Δ L/ L
Δ L is change in length of a wire when some force is applied on it to stretch it along its length and L is original length of a wire .
Stress is The elongation (or change in length) of a specimen divided by the original length, sometimes referred to as percent elongation.
Answer:
The elongation (or change in length) of a specimen divided by the original length, sometimes referred to as percent elongation.
Explanation:
Every object has some elastic and inelastic properties.
The strain is defined as the ratio of change in dimensions to the original dimensions.
There are three types of strains:
1. Longitudinal strain
2. Volumetric strain
3. Shear strain
So, it is defined as elongation (or change in length) of a specimen divided by the original length, sometimes referred to as percent elongation.
An object of mass 10 kg has a momentum of 15 kg m/s. Find the average force required to accelerate the object to 10 m/s over 20 seconds.
Answer:
Force = 4.25 Newton
Explanation:
Given the following data;
Mass = 10 kg
Momentum = 15 Kgm/s
Time, t = 20 seconds
Final velocity, V = 10 m/s
To find the average force required;
First of all, we would determine the initial velocity of the object.
Momentum = mass * velocity
15 = 10 * velocity
Velocity = 15/10
Velocity = 1.5 m/s
Next, we would determine the acceleration of the object by using the first equation of motion;
V = U + at
10 = 1.5 + a*20
10 - 1.5 = 20a
8.5 = 20a
Acceleration, a = 8.5/20
Acceleration, a = 0.425 m/s²
Lastly, we would find the average force by using the formula;
Force = mass * acceleration
Force = 10 * 0.425
Force = 4.25 Newton
The eficiency of a
simple machine can never be 100% why?
Answer:
Systems always tend toward a state of decreasing order unless more energy is provided into the system to counteract this tendency.
(d) Below shows a hydraulic press with a pump piston of area 4 cm2 and a ram area of
12 cm2 . IF A force of 300 N is applied on the pump piston, find:
(i)the maximum load on the ram.
(ii) the velocity ratio of the machine.
(iii) the mechanical advantage of the machine.
(iv)the efficiency of the machine.
Answer:
Explanation:
hi
state any two effects of gravitational force
Answer:
The effect of gravity extends from each object out into space in all directions, and for an infinite distance. However, the strength of the gravitational force reduces quickly with distance. Humans are never aware of the Sun's gravity pulling them because the pull is so small at the distance between the Earth and Sun.
Answer:
The Earth's gravitational force accelerates objects when they fall. It constantly pulls, and the objects constantly speed up.
Explanation:
experiment to calculate the spring constant of a spring.
Determine the mass of the object below to the correct degree of precision.
433.0 g
433.45 g
433.40 g
434.50 g
Answer:
You did not include the picture but I found a similar question that I can explain and you can then use to answer yours.
The middle scale is in hundreds. The arrow here is pointing to 100 so the mass of the object is more than 100g but less than 200g.
The highest scale is in 10s. The arrow is pointing to 0. This means that the object weighs more than 100 but less than 110 g. If the arrow was pointing to 10 then the object would weigh more than 110g.
The bottommost scale is in 1s. Notice how the scale is pointing to 5.7 grams. The object is therefore 105.7 grams.
Look for the option closest to this because the 105.7g might be rounded up.
You will then find 105.65g as your answer.
Answer:433.0 g
Explanation:i’m not 100% sure
Andrea rides her bicycle at a speed of 10 m/s. She and the bike have a combined mass of
50 kg.
a.
If she uses her brakes to slow down to 5 m/s, how much energy is converted to
heat?
Answer:
1875 J of energy is converted to heat.
Explanation:
Given that,
The combined mass of Andrea and the bike is 50 kg
Initial speed of Andrea's bicycle, u = 10 m/s
Final speed of Andrea's bicycle, v = 5 m/s
The energy converted to heat can be calculated using the work-energy theorem as follows :
[tex]E=\dfrac{1}{2}m(v^2-u^2)\\\\E=\dfrac{1}{2}\times 50\times ((5)^2-(10)^2)\\\\E=-1875\ J[/tex]
So, 1875 J of energy is converted to heat.
Define measurement with examples.
Explanation:
Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. An example of measurement is 15" by 25". ... The dimension, quantity, or capacity determined by measuring.
Measurement refers to the comparison of unknown physical quantity with a known quantity.
for eg. measurement of body while sewing clothes.......
HELP me
Which sentence best describes how the horse is doing work?
A It is using motion to transfer energy and force away from the heavy object
B it is using force to apply power and decrease the energy of the heavy object
C it is using energy to apply the force needed to move the object over a distance
D it is using power to force the heavy object to move over A certain distance
When developing an experiment design, which could a scientist take to improve the quality of the results?
The options missing are;
A. Make only a few changes to the manipulated variable.
B. Identify any biases about the answer to the scientific question.
C. Include as many details as possible when writing the conclusion.
D. Share her ideas through peer review.
Answer:
B. Identify any biases about the answer to the scientific question.
Explanation:
Since the question is asking what can be done to improve the quality of the results, it means what can the scientist do to make sure that the result answers the question properly and has little or no biases.
Thus, looking at the options, the only one that comes close to actually improving on the quality of the results before finalizing is option B where the scientist is to identify any biases.
20. A semiconductor is a
crystalline solid that conducts current under any condition
metallic solid that conducts current under any condition
metallic solid that conducts current under certain conditions
crystalline solid that conducts current under certain conditions
Answer:
D. crystalline solid that conducts current under certain conditions
Explanation:
Semiconductors are crystalline solids that has the ability to conduct electrical currents but on certain conditions e.g heat. The conduction of semiconductors is less than that of conductors (metals) but more than insulators (nonmetals), hence, they are said to be intermediates of conductors and insulators in terms of electrical conductivity.
Examples of semiconductors are silicon, boron, carbon, germanium, arsenic etc.
Las carreras de velocidad pura en el atletismo son:
A. Un ladrón perseguido por la policia
B.100 y 200 mts planos
C. salir corriendo cuando la mama lo va a castigar
D.N.A
A girl walks 55 m downhill in 3.2 s. What is her average velocity?
Answer:
V = 17.2
Explanation:
Speed = distance(m) / time(s)
= 55m / 3.2s
=17.2 m/s
what is the equation of preassure
Tính công của dòng điện
Answer:
CG gh sure er go b vh pxuh FPI OO c AM h kh
An electron enters the magnetic field at right angle from left B into paper. The electron will be deflected?
Answer:
According to this direction of force is perpendicular to the direction of current and magnetic field. Therefore force is opposite to electron into the paper at 90°.
Why is it difficult to maintain constant speed of a vehicle?
Answer:
The road surface is always rough, so the frictional force between the tires and the road surface make it difficult to maintain constant speed because acceleration always changes.
I am struggling with the question below, pls help: What is the distance between the moon and the earth if the mass of the moon is 7.34 x 10²² kg and the force of attraction between the two is 2.00 x 10 ^ 20.
Thank you in advance!
Answer:
Explanation:
What you forgot to include is the mass of the earth, which is 5.98 × 10²⁴ kg. NOW we can do the problem:
[tex]F=\frac{Gm_1m_2}{r^2}[/tex] where m1 and m2 are the masses of the objects experiencing this force of gravity, F. G is the universal gravitational constant. Filling in:
[tex]2.00*10^{20}=\frac{(6.67*10^{-11})(7.34*10^{22})(5.98*10^{24})}{r^2}[/tex]
We are going to rearrange and solve for r before we do any math on this thing:
[tex]r=\sqrt{\frac{(6.67*10^{-11})(7.34*10^{22})(5.98*10^{24})}{2.00*10^{20}} }[/tex] and when we plug all that mess into our calculators we will do it just like that and then round to 3 significant digits at the very end.
Doing all of that gives us that
r = 3.83 × 10⁸ m
A hockey puck has a mass of 0.21 kg. If the hockey puck
is moving with 74 J of kinetic energy, what is its speed?
Show all your work.
Answer:
v = 26.54 m/s
Explanation:
Given that,
The mass of a hockey puck, m = 0.21 kg
The kinetic energy of the hockey puck, E= 74 J
We need to find the speed of the hockey puck. Let the speed is v. We know that, the kinetic energy is given by :
[tex]E=\dfrac{1}{2}mv^2[/tex]
Where
v is the speed
So,
[tex]v=\sqrt{\dfrac{2E}{m}} \\\\v=\sqrt{\dfrac{2\times 74}{0.21}} \\\\v=26.54\ m/s[/tex]
So, the speed of the hockey puck is 26.54 m/s.
