Answering the following questions will help you to focus on the outcomes of these experiments:

How does the length to height ratio (the IMA) of trial 1 compare to trial 2?
Why is the actual mechanical advantage less than the ideal mechanical advantage in each of the trials?
If a machine was 100% efficient, how would the AMA compare to the IMA?
Write a summary paragraph discussing this experiment and the results. Use the following questions and topics to help guide the content of your paragraph.

According to your data, was your hypothesis correct? (Be sure to refer to your data when answering this question.)
Summarize the conclusions that you can draw from this experiment. Use the questions above to guide your ideas.
Summarize any difficulties or problems you had in performing the experiment that might have affected the results. Describe how you might change the procedure to avoid these problems.
Give at least three examples from everyday life where an inclined plane is used to reduce the effort force needed to accomplish a task.

Answer:

the mass of the central body (earth) and the radius of the orbit affect orbital velocity

Explanation:

Answer:

because you use more force to push than to pull (well it depends how heavy it is)

Explanation:

Answer:

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Explanation:[tex]A \ frictionless \ pulley, \ whic h\ can \ be \ modeled \ as \ a \ 0.83 k g \ solid \ cylinder \ with \ a \ 0.30 \ m \ radius,[/tex]  [tex]\ has \ a \ rope \ going \ over \ it[/tex] [tex]The \ tensions \ in \ the \ rope \ are \[/tex] [tex]12 n \ and \ 10 n . \ What \ is \ the \ angular \ acceleration \ of \ the \ pulley?[/tex]

[tex]From \ the \ given \ information:[/tex]

[tex]The \ moment \ of \ inerti a \ of \ a \ solid \ cylinder[/tex] [tex]I = \dfrac{1}{2}mr^2[/tex]

[tex]I = \dfrac{1}{2}(0.83)(0.3)^2[/tex]

[tex]I = 0.03735 \ kg \ m^2[/tex]

[tex]The \ net \ torque = F_1(r) - F_2(r) \\ \\ = 12(0.3) - 10(0.3) \\ \\ = 0.6 \ N.m[/tex]

[tex]Torque (T) = moment \ of \inertia (I) \times angular \ acceleration ( \alpha)[/tex]

[tex]\alpha = \dfrac{T}{I}[/tex]

[tex]\alpha = \dfrac{0.6 \ Nm}{0.03735 \ kg \ m^2}[/tex]

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Answer:

4 x 10⁶m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Time  = 0.0001s

Final velocity  = 400m/s

Unknown:

Acceleration of the object  = ?

Solution:

Acceleration is the rate of change of velocity with time;

 Acceleration  = [tex]\frac{Final velocity - Initial velocity }{Time }[/tex]  

 Acceleration  = [tex]\frac{400 - 0}{0.0001}[/tex]   = 4 x 10⁶m/s²

Answer:

•Helps to maintain va proper pH in the body which supports cell function.

•Carries electrolytes such as sodium and potassium to our muscles.

Answer:

No

Explanation:

Not all metals stick to magnets. Like aluminum. if you were to stick a magnet on to an aluminum it would fall off.

Answer:

Infinity

Explanation:

When you have a limit approaching infinity one method you can use is to remember that the highest power dominants all of the other ones so when we have (t^2)/t-1 like in your problem, we see that t^2 has the highest power of 2 so if that's going to infinity and it's not being divided by any powers higher than it will just be inifinity.

We have that for the Question, it can be said that  in the limit calculations below, if you need to use -â or â, enter -infinity or infinity. the limit is

From the question we are told

tafu models its position with the function

p(t)= t2 t â 1 where t>1.

in the limit calculations below, if you need to use -â or â, enter -infinity or infinity.

(a) calculate the limit

Generally the equation for the Question  is mathematically given as

[tex]p(t)=\frac{t^2}{t-1}\\\\Therefore\\\\For Lim_{\infty}\\\\We have\\\\ Lim_{t->\infty} p(t)= Lim_{t->\infty}\frac{t^2}{t-1}\\\\[/tex]

Since, the equivalent degree of numerator (t^2) is greater than that of the denominator

[tex]Lim_{t->\infty} p(t)= \infty[/tex]

For more information on this visit

https://brainly.com/question/23379286

Answer:

financial aid

Explanation:

edge

Explanation:

1A. The visible light portion of the electromagnetic spectrum shows the rainbow of colors, with violet and blue having shorter wavelengths, and therefore higher energy. At the other end of the spectrum toward red, the wavelengths are longer and have lower energy.

so its option 2

2A. Atom and molecules

PLEASE THANK, RATE AND FOLLOW ME,

AND PLEASE MARK ME AS "BRAINLIEST" ANSWER

HOPE IT HELPS YOU

Answer:

the answer is b

Explanation:

Answer:

b

Explanation:

I just did it on a p e x

Answer:

time speed accelaration negatives backwards

Explanation:

Earth's rotation and spherical shape cause winds to veer to the right (in the northern Hemisphere) or to the left (in the southern Hemisphere) of the direction they want to go.  This is known as the Coriolis effect.

If you didn't know that you're on a rotating Earth, and you looked at the patterns of the winds, you'd think there's some kind of force that's making the airflow veer to the right or left of the direction it actually wants to go.  This is known as the Coriolis force.  It's a"pseudo force", because it doesn't really exist.  It only LOOKS like it's there, because of the Earth's rotation and spherical shape..

The statement "Earth's rotation causes winds to veer to the west or to the east" is true about the Coriolis effect.

Fluid materials such as wind and ocean currents take different directions depending on the hemisphere, this movement of deviation is called the Coriolis effect.

Therefore, we can conclude that the force that tends to deflect the trajectory of objects moving across the entire earth's surface is known as the Coriolis effect.

Learn more about the Coriolis effect here: https://brainly.com/question/14290551

Answer:

Character vs self

Explanation:

The reason is because Martha is thinking to much about the negative things and it is making her feel like she is fighting her own body for control.

0.20Answer:

Explanation:

Answer:

8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m

Explanation:

A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).

The spring constant is:

F = -k/ x

where, k is the spring constant

F denotes the force,

and x denotes the change in the length of the spring.

k = 875N/m

x = 4.5m

We know that

Kx = mg

m= kx/ g

m = 875 × 4.5/ 9.8

m = 401.78kg

Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

Learn more about Spring constant here:

https://brainly.com/question/14159361

#SPJ5

Answer: c

Explanation:

The total distance the ultrasound pulse travelled is, twice the distance of the sea floor

Because it went back and forth

Answer:

62760J

Explanation:

Given parameters:

Mass  = 0.5kg  = 500g

Initial temperature  = 30°C

Final temperature  = 65°C

Unknown:

How much energy is absorbed by the water  = ?

Solution:

To solve this problem, we use the expression below:

  H  = m C Δt

  H =  m  x C x (t₂ - t₁ )

m is the mass

C is the specific heat  = 4.184J/g°C

t₂ is the final temperature

t₁ is the initial temperature

So;

              H  = 500 x 4.184 x (65  - 30) = 62760J

Answer:

He traveled 9km

Explanation:

To do this problem you need to use the equation which is Speed= distance/time and this problem gives you the speed which is 18 km/h and it gives you the time 1/2 hour so you write the equation 18= d/ 1/2 which his distance is 9km

Answer:

Newton

Explanation:

The unit of force is Newton and it is given after Sir Isaac Newton for his tremendous works in this regard.

 Force is the product of mass and acceleration of a body.

    Force  = mass x acceleration  

 The unit of mass = kg

                    acceleration  = m/s²

So;

      1N  = 1kgm/s²

Therefore, the unit of force is newtons and 1N is equal to  1kgm/s²

Answer:

(A) Fossil Fuels

Answer:

Fossil Fuels

Explanation:

That’s what CK12 told me

The chemical process which requires energy is breaking bond in KOH and HBr. Hence, option C is correct.

The capacity to perform work is known as energy in physics. Potential, kinematic, thermodynamic, electromagnetic, chemical, nuclear, and other types are all possible.

As energy is transferred through one body to another, there is also heat and work. As a result, heat transfer may result in thermal energy, whereas labor done may result in mechanical power.

As per the given reaction in the question,

KOH + HBr - KBr + H20

Here, in this reaction the chemical process which requires the energy is at the time of breaking of bonds in KOH and HBr at that time the energy is required.

Therefore, it is concluded that breaking bonds in KOH and HBr i.e., option C is correct.

To know more about Energy:

https://brainly.com/question/1932868

#SPJ2

Answer:

food chain / web lol? was this a question?

Answer:

The answer is D because when the faults move that is the tectonic plates moving. So earth quakes will be forming when the fault moves.

Explanation:

Answer:

Filtration is a method for separating an insoluble solid from a liquid. When a mixture of sand and water is filtered: the sand stays behind in the filter paper (it becomes the residue ) the water passes through the filter paper (it becomes the filtrate )

Explanation:

Listo!

Answer:

Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?

X-rays

radio waves

infrared light<<<----- CORRECT

visible light

Explanation:

Edge 2021

Infrared light is typically used to make images based on the temperatures of objects.

The range of all EM radiation arranged from high to low frequency (short to long wavelength) according to their frequency or wavelength. is known as the electromagnetic spectrum (EM).

Here,

Similar to visible light, X-rays are a type of electromagnetic radiation. X-rays have a higher energy than light, on the other hand, and can penetrate most materials, including the human body.

Images of inside body tissues and structures are produced using medical x-rays.

Electromagnetic energy in the infrared region of the spectrum can be seen by them. There is a relationship between an object's temperature and the electromagnetic radiation it releases since infrared radiation is strongly related to object temperature.

Hence,

Infrared light is typically used to make images based on the temperatures of objects.

To learn more about electromagnetic spectrum, click:

https://brainly.com/question/15576247

#SPJ5

Answer:

If I’m correct 300 joules

Explanation:

It's none of the above hope this helps