Answer:
[tex]T_2=39.5N[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=5kg[/tex]
Length [tex]L=0.67m[/tex]
Tension [tex]T=88N[/tex]
Generally the equation for Tension is mathematically given by
[tex]T = m * ( g + v^2 /l)[/tex]
Therefore
[tex]T_1 = m * ( g + \frac{v^2}{l})[/tex]
[tex]88 = 5 * ( 9.8 + \frac{v^2}{0.67})[/tex]
[tex]v^2=5.2[/tex]
[tex]v=2.4m/s[/tex]
The uniform velocity is
[tex]v=2.4m/s[/tex]
Therefore
The tension at the side of the circle halfway between the top and bottom is
[tex]T_2=5*\frac{2.3^2}{0.67}[/tex]
[tex]T_2=39.5N[/tex]
The motion that is not repeated in regular interval of time is called....?
please help me!
Answer:
Motion which repeats itself after regular intervals of time is known as periodic motion.A projectile of mass m is fired horizontally with an initial speed of v0 from a height of h above a flat, desert surface. Neglecting air friction, at the instant before the projectile hits the ground, find the following in terms of m, v0, h, and g : Are any of the answers changed if the initial angle is changed?
Complete question is;
A projectile of mass m is fired horizontally with an initial speed of v0 from a height of h above a flat, desert surface. Neglecting air friction, at the instant before the projectile hits the ground, find the following in terms of m, v0, h and g:
(a) the work done by the force of gravity on the projectile,
(b) the change in kinetic energy of the projectile since it was fired, and
(c) the final kinetic energy of the projectile.
(d) Are any of the answers changed if the initial angle is changed?
Answer:
A) W = mgh
B) ΔKE = mgh
C) K2 = mgh + ½mv_o²
D) No they wouldn't change
Explanation:
We are expressing in terms of m, v0, h, and g. They are;
m is mass
v0 is initial velocity
h is height of projectile fired
g is acceleration due to gravity
A) Now, the formula for workdone by force of gravity on projectile is;
W = F × h
Now, Force(F) can be expressed as mg since it is force of gravity.
Thus; W = mgh
Now, there is no mention of any angles of being fired because we are just told it was fired horizontally.
Therefore, even if the angle is changed, workdone will not change because the equation doesn't depend on the angle.
B) Change in kinetic energy is simply;
ΔKE = K2 - K1
Where K2 is final kinetic energy and K1 is initial kinetic energy.
However, from conservation of energy, we now that change in kinetic energy = change in potential energy.
Thus;
ΔKE = ΔPE
ΔPE = U2 - U1
U2 is final potential energy = mgh
U1 is initial potential energy = mg(0) = 0. 0 was used as h because at initial point no height had been covered.
Thus;
ΔKE = ΔPE = mgh
Again like a above, the change in kinetic energy will not change because the equation doesn't depend on the angle.
C) As seen in B above,
ΔKE = ΔPE
Thus;
½mv² - ½mv_o² = mgh
Where final kinetic energy, K2 = ½mv²
And initial kinetic energy = ½mv_o²
Thus;
K2 = mgh + ½mv_o²
Similar to a and B above, this will not change even if initial angle is changed
D) All of the answers wouldn't change because their equations don't depend on the angle.
Part A
Calculate the work done when a force of 6.0 N moves a book 2.0 m
Express your answer with the appropriate units.
Answer:
Work done applied = 12 newton-meter
Explanation:
Given examples:
Force applied = 6 newton
Distance of book = 2 meter
Find from the given data:
Work done
Computation:
The equation can be used to compute work.
Work done applied = Force applied x Distance of book
Work done applied = Force x Distance
Work done applied = 6 x 2
Work done applied = 12 newton-meter
two factor of a number are 5 and 6 .what is the number show working
Answer:
30
Explanation:
since [tex]\frac{30}{5}[/tex]=6
[tex]\frac{30}{6}[/tex]=5
then both 5 and 6 are factors of 30
Have a nice day
When the Glen Canyon hydroelectric power plant in Arizona is running at capacity, 690 m3m3 of water flows through the dam each second. The water is released 220 mm below the top of the reservoir. If the generators that the dam employs are 90% efficient, what is the maximum possible electric power output?
Answer:
The output electric power is 1338876 W.
Explanation:
Volume, V = 690 cubic meter
height, h = 220 mm = 0.22 m
efficiency = 90 %
time , t = 1 s
Let the mass is m.
m = volume x density
m = 690 x 1000 = 690000 kg
The input power is
P = m g h = 690000 x 9.8 x 0.22 = 1497640 W
The electric power out put is
[tex]P' = 90 % of 1487640\\\\\\P' = 1338876 W[/tex]
A major artery with a 1.3 cm^2 cross-sectional area branches into 18 smaller arteries, each with an average cross-sectional area of 0.6 cm^2. By what factor is the average velocity of the blood reduced when it passes into these branches?
Answer:
When the blood passes into the smaller branches, its average velocity reduces by a factor of 0.12
Explanation:
Given;
initial area of the artery, A₁ = 1.3 cm²
Area of each smaller 18 arteries, a₂ = 0.6 cm²
Total area of the smaller 18 arteries, A₂ = 18 x 0.6 cm²
Apply flow rate equation;
Q = AV
where;
Q is the flow rate of the blood
V is the average velocity of the blood
If the flow rate is constant, then;
A₁V₁ = A₂V₂
[tex]V_2 = \frac{A_1V_1}{A_2} = \frac{1.3\times V_1}{18\times 0.6} \\\\V_2 = 0.12 \ V_1[/tex]
When the blood passes into the smaller branches, its average velocity reduces by a factor of 0.12
The number 0.00325 × 10-8 cm can be expressed in millimeters as A) 3.25 × 10-11 mm. B) 3.25 × 10-10 mm. C) 3.25 × 10-12 mm. D) 3.25 × 10-9 mm.
Answer:
Option B. 3.25×10¯¹⁰ mm.
Explanation:
Measurement (cm) = 0.00325×10⁻⁸ cm
Measurement (mm) =?
The measurement in mm can be obtained as follow:
1 cm = 10 mm
Therefore,
0.00325×10⁻⁸ cm = 0.00325×10⁻⁸ cm × 10 mm / 1 cm
0.00325×10⁻⁸ cm = 3.25×10¯¹⁰ mm
Thus, 0.00325×10⁻⁸ cm is equivalent to 3.25×10¯¹⁰ mm.
The conversion from centimeter to millimeter of the number 0.00325*10^-8cm is 3.25*10^-10mm
The number given is in standard form and can be written as 3.25*10^-11 cm.
To convert this from centimeter to millimeter, we have to multiply this value by 10.
Conversion Units1 cm - 10mm100cm = 1m1000m = 1kmSo, let's 3.25*10^-11 by 10 and get our value in mm
[tex]3.25*10^-^1^1 * 10 = 3.25*10^-^1^0[/tex]
From the calculation above, we can see that option B is the right answer since it carries [tex]3.25*10^-^1^0mm[/tex]
Learn more about conversion of units here;
https://brainly.com/question/8426032
A car is travelling at a speed of 30m/s on a straight road. what would be the speed of the car in km
Answer:
[tex] = \frac{30 \times {10}^{ - 3} }{1} \\ = 0.03 \: km \: per \: second[/tex]
Answer:
108 km/hr or 0.03 km/s
Explanation:
conversion factor for m/s to km/hr is 5/18
conversion factor for m/s to km/s is 1/1000
In electronic circuits:______.
a. the power used by a circuit is the resistance times the current squared.
b. electric and magnetic fields are transporting the energy.
c. electrons are transporting the energy.
d. the power used by a circuit is the voltage times the current squared.
e. the power used by a circuit is the current times the voltage.
Answer:
(a), (c) and (e) s correct.
Explanation:
a. the power used by a circuit is the resistance times the current squared.
The power is given by P = I^2 R, so the statement is correct.
b. electric and magnetic fields are transporting the energy.
false
c. electrons are transporting the energy.
The energy is transferred by flow of electrons. It is correct.
d. the power used by a circuit is the voltage times the current squared.
The power is given by P = V I, the statement is wrong.
e. the power used by a circuit is the current times the voltage.
The power is given by P = V I, the statement is correct.
equations of kinematics new dimensions
Answer:
Δx Displacement
t Time interval
v0 Initial velocity
v Final velocity
a Constant acceleration
Explanation:
I dont know if this helps because these are kinda like, examples... hope it helps tho :)
Có bao nhiêu đặc trưng sinh lý của âm
Answer:
Ba đặc trưng sinh lí của âm là độ cao, độ to và âm sắc.
Explanation:
A dipole placed in an electric field will... Try to align along the direction of the field. Try to align antiparallel to the direction of the field. try to align perpendicular to the field. none of these choices.
Answer:
The dipole always tries to align in the direction of electric field so that the net torque is zero.
Explanation:
When a dipole placed in an electric field at any arbitrary angle, it experiences a torque.
Let the dipole moment is p, electric field is E and the angle is A.
The torque is given by
Torque = p E sin A
where, A is the angle between the electric field and dipole moment.
So, the dipole always tries to align in the direction of electric field so that the net torque is zero.
plsss help me
thank you very much
Charlotte throws a paper airplane into the air, and it lands on the ground. Which best explains why this is an example of projectile motion? The paper airplane’s motion is due to horizontal inertia and the vertical pull of gravity. A force other than gravity is acting on the paper airplane. The paper airplane’s motion can be described using only one dimension. A push and a pull are the primary forces acting on the paper airplane.
highschool physics, not college physics
Answer:
Answer:
A). The paper airplane’s motion is due to horizontal inertia and the vertical pull of gravity.
Explanation:
Edge.
Answer:
The motion of the paper airplane is best explained by horizontal inertia and vertical pull of gravity.
Explanation:
What is horizontal inertia and vertical pull of gravity?Inertia is the property by which the body wants to remain in its position unless any external for is applied. Here horizontal inertia is inertia of motion which is acting horizontally .
While vertical pull is due to the earth .
In a paper airplane , four forces act .these forces provide it flight.These forces are horizontal inertia , vertical pull downwards , lift by air and drag.Hence horizontal inertia and vertical pull best explain the projectile motion of paper airplane.
Also read it;
https://brainly.com/question/11049671
#SPJ2
A string of length 3m and total mass of 12g is under a tension of 160N. A transverse harmonic wave with wavelength 25cm and amplitude 2cm travels to the right along the string. It is observed that the displacement at x=0 at t=0 is 0.87cm.
a) What is the wave?
b) Wrote the wave function, y(x,t)
c) Find the particle velocity at position x=0 at time t=10s. What is the maximum particle velocity?
Answer:
Explanation:wave=wavelength×frequency,
Two skaters, both of mass 75 kg, are on skates on a frictionless ice pond. One skater throws a 0.4-kg ball at 6 m/s to his friend, who catches it and throws it back at 6.0 m/s. When the first skater has caught the returned ball, what is the velocity of each of the two skaters
Answer:
v = 0.064 m/s
Explanation:
Given that,
The mass of two skaters = 75 kg
The mass of a ball = 0.4 kg
The speed of the ball = 6 m/s
The speed of skater = 6 m/s
We need to find the velocity of each of the two skaters.
Under the values given the moment with respect to the ball and which is subsequently transmitted to people it would be given by:
[tex]P=0.4(6)+0.4(6)\\\\=4.8\ kg-m/s[/tex]
We know that,
P = mv
Where
v is the velocity of each skater.
[tex]v=\dfrac{p}{m}\\\\v=\dfrac{4.8}{75}\\\\=0.064\ m/s[/tex]
So, the velocity of each of the skaters is 0.064 m/s.
Use a variation model to solve for the unknown value. Use as the constant of variation. The stopping distance of a car is directly proportional to the square of the speed of the car. (a) If a car travelling has a stopping distance of , find the stopping distance of a car that is travelling . (b) If it takes for a car to stop, how fast was it travelling before the brakes were applied
Complete question is;
Use a variation model to solve for the unknown value.
The stopping distance of a car is directly proportional to the square of the speed of the car.
a. If a car traveling 50 mph has a stopping distance of 170 ft, find the stopping distance of a car that is traveling 70 mph.
b. If it takes 244.8 ft for a car to stop, how fast was it traveling before the brakes were applied?
Answer:
A) d = 333.2 ft
B) 60 mph
Explanation:
Let the stopping distance be d
Let the speed of the car be v
We are told that the stopping distance is directly proportional to the square of the speed of the car. Thus;
d ∝ v²
Therefore, d = kv²
Where k is constant of variation.
A) Speed is 50 mph and stopping distance of 170 ft.
v = 50 mph
d = 170 ft = 0.032197 miles
Thus,from d = kv², we have;
0.032197 = k(50²)
0.032197 = 2500k
k = 0.032197/2500
k = 0.0000128788
If the car is now travelling at 70 mph, then;
d = 0.0000128788 × 70²
d = 0.06310612 miles
Converting to ft gives;
d = 333.2 ft
B) stopping distance is now 244.8 ft
Converting to miles = 0.046363636 miles
Thus from d = kv², we have;
0.046363636 = 0.0000128788(v²)
v² = 0.046363636/0.0000128788
v² = 3599.99658
v = √3599.99658
v ≈ 60 mph
Can someone write this question clearly and send it to me? Don't just say the answer. Draw and write clearly please
Explanation:
acceleration is weight*gravity
tension is the weight In Newtons
How does the magnitude of the normal force exerted by the ramp in the figure compare to the weight of the static block? The normal force is:______ a. greater than the weight of the block. b. possibly greater than or less than the weight of the block, depending on whether or not the ramp surface is smooth. c. equal to the weight of the block. d. possibly greater than or equal to the weight of the block, depending on whether or not the ramp surface is smooth. less than the weight of the block.
Answer:
less than the weight of the block.
Explanation:
From the free body diagram, we get.
The normal force is N = Mg cosθ
The tension in the string is T = Mg sinθ
Wight of the block when the block is static, W = Mg
Now since the magnitude of cosθ is in the range of : 0 < cosθ < 1,
therefore, the normal force is less than the weight of the static block.
don't answer for points you will be reported
Explanation:
Glasses or Contacts. You might not realize it, but if you wear glasses or contact lenses, this is light refraction at play. ...
Human Eyes. Human eyes have a lens. ...
Prism. ...
Pickle Jar. ...
Ice Crystals. ...
Glass. ...
Twinkling Stars. ...
Microscope or Telescope.
You have been hired to design a spring-launched roller coaster that will carry two passengers per car. The car goes up a 13-m-high hill, then descends 20 m to the track's lowest point. You've determined that the spring can be compressed a maximum of 2.4 m and that a loaded car will have a maximum mass of 430 kg. For safety reasons, the spring constant should be 13 % larger than the minimum needed for the car to just make it over the top. Part A What spring constant should you specify
Answer:
22.15 N/m
Explanation:
As we know potential energy = m*g*h
Potential energy of spring = (1/2)kx^2
m*g*h = (1/2)kx^2
Substituting the given values, we get -
(400)*(9.8)*(10) = (0.5)*(k)*(2.0^2)
k = 39200/2.645
k = 19600 N/m
For safety reasons, this spring constant is increased by 13 % So the new spring constant is
k = 19600 * 1.13 = 22148 N/m = 22.15 N/m
The first and second coils have the same length, and the third and fourth coils have the same length. They differ only in the cross-sectional area. According to theory, what should be the ratio of the resistance of the second coil to the first coil and the fourth coil to the third
Answer:
The ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
Explanation:
The resistance of the coil is directly proportional to the length of the coil and inversely proportional to the area of coil and hence inversely proportional to the square of radius of the coil.
So, the ratio of the resistances of second coil to the first coil is the ratio of square of radius of the first coil to the square of radius of second coil.
And
The ratio of the resistances of fourth coil to the third coil is the ratio of square of radius of the third coil to the square of radius of fourth coil.
Mỗi giây có 2,1.1018 ion+
2 và 1,8.1018
electron chạy qua tiết diện đèn ống.
Đường kính tiết diện của đèn ống là 2,0
cm. Mật độ dòng điện trung bình qua
đèn là bao nhiêu
Phát biểu nào sau đây là SAI?
A. Cường độ điện trường là đại lượng
đặc trưng cho điện trường về phương
diện tác dụng lực.
B. Điện trường tĩnh là điện trường có
cường độ E không đổi tại mọi điểm.
C. Đơn vị đo cường độ điện trường là
vôn trên mét (V/m).
D. Trong môi trường đẳng hướng,
cường độ điện trường giảm lần so với
trong chân không
Answer:
B.
Explanation:
sana makatulong sayo
A 97.6-kg baseball player slides into second base. The coefficient of kinetic friction between the player and the ground is μk = 0.555.
(a) What is the magnitude of the frictional force?
(b) If the player comes to rest after 1.22 s, what is his initial speed?
Answer:
[tex]v=6.65m/sec[/tex]
Explanation:
From the Question we are told that:
Mass [tex]m=97.6[/tex]
Coefficient of kinetic friction [tex]\mu k=0.555[/tex]
Generally the equation for Frictional force is mathematically given by
[tex]F=\mu mg[/tex]
[tex]F=0.555*97.6*9.8[/tex]
[tex]F=531.388N[/tex]
Generally the Newton's equation for Acceleration due to Friction force is mathematically given by
[tex]a_f=-\mu g[/tex]
[tex]a_f=-0.555 *9.81[/tex]
[tex]a_f=-54455m/sec^2[/tex]
Therefore
[tex]v=u-at[/tex]
[tex]v=0+5.45*1.22[/tex]
[tex]v=6.65m/sec[/tex]
How do solar panels work with conduction, convection and radiation?
Answer:
In the case of a solar thermal panel we are trying to heat above the ambient temperature so conduction and convection will work against us by taking heat from the panel to the out- side world. ... The sun (at 6000 C surface temperature) is hotter than the solar panel so the panel will get hot due to the solar radiation.
Explanation:
Can someone help me
Btw the last one say current
what is the meanjng of laritude ??
I’m assuming you meant latitude:
The angular distance north or south of the earth's equator, measured in degrees along a meridian, as on a map or globe.
a region based on its distance to the equator uses latitude measurements
basically: up and down , north to south from a certain point
Question 9 of 10
What causes the different seasons on Earth?
A. The angles at which the suns rays strike the Earth
Ο Ο Ο
B. The distance between Earth and the sun
C. The speed at which the Earth rotates on its axis
O
D. Increasing levels of carbon dioxide in the atmosphere.
SUBMIT
Answer:
B
Explanation:
The seasons are measured in how far or close the earth is to the sun.
A ball rolls over the edge of a platform with only a horizontal velocity. The height of the platform is 1.6 m and the horizontal range of the ball from the base of the platform is 20 m. What is the horizontal velocity of the ball just before it touches the ground?
Explanation:
the answer is in the above image
