An enzyme increases the reaction rate by:________. a. stabilizing of transition state. b. shifting the reaction equilibrium. c. increasing the probability of product formation. d. All of the answers are correct. e. None of the answers is correct.

Answers

Answer 1
Enzymes provide activation energy for the reactions they catalyze.

Related Questions

What type of bond is present in NBr?

Answers

Answer:

Covalent bonding and non-covalent bonding

An individual was injected with 80 mg of inulin and 960,000 counts per min (cpm) of tritium-labeled water (3H20) to determine the volume of various body fluid compartments. After equilibration a blood sample was obtained and the plasma inulin concentration was 0.5 mg% and the plasma activity (concentration) of tritium was 20 cpm/ml. The volumes of which body compartments can be determined?

Answers

The measurement of body fluid compartments can be achieved by the dilution of chemical compounds that only circulate and disperse in the region of selected areas in the body. The dilution process is dependent on how the concentration is defined.

Given that:

the concentration of plasma insulin after equilibrium = 0.5 mg %

Concentration C  = 0.5 mg/100

Concentration C = 0.005 mg/ml

The mass of insulin = 80 mg

Since the mass amount of the chemical compound(i.e. insulin) and the concentration is known.

The volume of the body fluid compartment can be calculated as:

[tex]\mathbf{volume = \dfrac{\text{mass of the marker }}{concentration }}[/tex]

[tex]Volume = \dfrac{80 \ mg}{0.005 \ mg/ml}[/tex]

Volume = 16000 ml

Thus, it is known that insulin is generally utilized for the measurement of the extracellular fluid volume and serves as a cell impermeant marker.

As a result;

The volume of the extracellular fluid compartment is 16000 ml.

However, the tritium-labeled water is a good marker for the entire body fluid compartment due to the fact that:

its diffusion occurs throughout the entire body,it is identical to water and;the equilibrium concentration is typically easy to measure due to the radioactive characteristics of tritium.

Given that:

plasma activity of tritium = 20 cpm/ml

i.e.

In 1 ml of plasma, 20 cpm of tritium is present.

As such, in 960,000 counts per min (cpm) of tritium-labeled water, the volume of the whole body compartment is:

[tex]\mathbf{= \dfrac{960000}{20} ml \plasma}[/tex]

= 48000 ml of plasma

Therefore, we can conclude that the volumes of the body compartment that can be determined are:

The volume of the extracellular fluid compartment, which is 16000 ml.The volume of the whole body compartment, which is 48000 ml

Learn more about body fluid compartments here:

https://brainly.com/question/6791522?referrer=searchResults

Which of the following will affect the rate of a chemical reaction?
solution temperature
solution color
solute mass
solution volume

Answers

Answer:

Solution temperature.

Explanation:

Hello there!

In this case, considering this question about chemical kinetics, it will be possible for us to analyze two perspectives:

1. Molecular: here, we infer that the solution temperature will provide more energy to the molecules in order to undergo more effective crashes which will make more products and therefore, increase the rate constant.

2. Mathematical: by means of the Arrhenius equation, it will be possible to tell that the increase in the temperature of the system, the negative of the exponent present in such equation will increase and therefore turn the rate constant bigger.

In such way, we infer the answer is solution temperature.

Regards!

Part A
3.75 mol of LiCl in 3.36 L of solution
Express the molarity in moles per liter to three significant figures

Answers

Answer:

1.12 mol/L.

Explanation:

From the question given above, the following data were obtained:

Mole of LiCl = 3.75 moles

Volume = 3.36 L

Molarity =?

Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:

Molarity = mole / Volume

With the above formula, we can obtain the molarity of the solution as follow:

Mole of LiCl = 3.75 moles

Volume = 3.36 L

Molarity =?

Molarity = mole /Volume

Molarity = 3.75 / 3.36

Molarity = 1.12 mol/L

Thus, the molarity of the solution is 1.12 mol/L

You have been contracted to determine how different salts affect the pH of water. Which of the solids in the following set should you test to investigate for the effects of cations on pH?

a. AlBr3
b. Rb2SO3
c. MgCl2
d. RbBrO
e. CH3NH3Br

Answers

Answer:

Hence the solids that should test to investigate the effects of cations on pH is

[tex]AlBr_{3}[/tex] (Cation is Al 3+)  

[tex]MgCl_{2}[/tex]  ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] ( Cation is NH2+).

Explanation:

The solids in the following should you test to investigate the effects of cations on pH.  

[tex]AlBr_{3}[/tex] contains (Cation is Al 3+)  

[tex]MgCl_{2}[/tex] contains ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] contains( Cation is NH2+ )

The atoms or the molecules containing the positive charge that gets attracted to the cathode are called cations. The compounds a. [tex]\rm AlBr_{3}[/tex], c. [tex]\rm MgCl_{2}[/tex] and e. [tex]\rm CH_{3}NH_{3}Br[/tex] should be investigated.

What are cations and pH?

Cations are the positive charge containing molecules and atoms that have more protons in their nucleus than the number of electrons in their shells. They are formed when they lose one or more electrons to another atom.

The addition or release of the electrons of the cations and anions affects the pH system as absorption of the cation decreases the pH and absorption of the anions increases the pH.

Hence, [tex]\rm Al^{3+}[/tex], [tex]\rm Mg^{2+}[/tex] and [tex]\rm NH^{2+}[/tex] are the cation that should be investigated. The addition of the cations will reduce the pH of the reaction.

Therefore, absorption of the cation reduces the pH.

Learn more about cations and pH here:

https://brainly.com/question/13800672

Four atoms and/or ions are sketched below in accordance with their relative atomic and/or ionic radii. Which of the following sets of species are compatible with the sketch?
Explain. (a) C,Ca2+,Cl−,Br−;
(b) Sr4, Cl,Br−,Na+

(d) Al,Ra2+,Zr2+

(c) Y,K,Ca,Na+, Mg2+;

e) Fe,Rb,Co,Cs


Answers

Answer:

Hence the correct option is an option (b) Sr4, Cl,Br−,Na+.

Explanation:    

Bromine and chlorine belong to an equivalent group. As we go down the group the dimensions increases which too there's a charge on the bromine atom. therefore the size of the Br- is going to be larger in comparison to the chlorine atom.

Sr atom is within the second group, and also it's below the above-mentioned atoms.so Sr is going to be the larger one among all the atoms.

Sodium and chlorine belong to an equivalent period .size decrease from left to right. but due to the charge on sodium its size decreases and there's an opportunity that Na+ size could be adequate for Cl.      

Here we finally assume that two atoms are of an equivalent size (Na+ and Cl) which are less in size compared to the opposite two(Sr and Br-) during which one is greater (Sr)and the opposite is smaller(Br-).

Determine what product will be produced at the negative electrode for the following reaction:
2KCl(aq) + 2H20(1) -> H2(g) + Cl2(g) + 2KOH(aq)
A. H2
B. Cl2
с. КОН
D. K

Answers

Answer:

Choice A. [tex]\rm H_{2}[/tex] would be produced at the negative electrode.

Explanation:

Ionic equation for this reaction:

[tex]2\, {\rm K^{+}} + 2\, {\rm Cl^{-}} + {2\, \rm H_{2} O} \to {\rm H_{2}} + {\rm Cl_{2}} + 2\, {\rm K^{+}} + {\rm 2\, OH^{-}}[/tex].

Net ionic equation:

[tex]2\, {\rm Cl^{-}} + 2\, \rm H_{2} O} \to {\rm H_{2}} + {\rm Cl_{2}} + 2\, {\rm OH^{-}}[/tex].

Half-equations:

[tex]2\, {\rm Cl^{-}} \to {\rm Cl_{2}} + 2\, {e^{-}}[/tex].

(Electrons travel from the solution to an electrode.)

[tex]2\, {\rm \overset{+1}{H}_{2} O} + 2\, {e^{-}} \to \overset{0}{\rm H}_{2} + 2\, {\rm O\overset{+1}{H}\!^{-}}[/tex].

(An electrode supply electrons to the solution to reduce some of the [tex]\rm H[/tex] atoms from [tex]\rm H_{2}O[/tex].)

In a DC circuit, electrons always enter the circuit from the negative terminal of the power supply and return to the power supply at the positive terminal.

The negative electrode is connected to the negative terminal of the power supply. Electrons from the power supply would flow into the solution through this electrode.  

This continuous supply of electrons at the negative electrode would drive a reduction half-reaction. In this question, that corresponds to the reduction of water: [tex]2\, {\rm \overset{+1}{H}_{2} O} + 2\, {\rm e^{-}} \to \overset{0}{\rm H}_{2} + 2\, {\rm O\overset{+1}{H}\!^{-}}[/tex]. Hence, [tex]\rm H_{2}[/tex] would be produced at the negative electrode.

Which of the following options would be the best for dissolving PbBr2(s)?
1) add to a solution of CH3COOH
2) add to a solution of NaBr
3) add to a solution of NH3
4) add to a solution of NH4Br
5) add to a solution of NaOH

Answers

The best option for dissolving PbBr₂ is option (2)

2) Add a solution of NaBr

The reason for choosing the above option is as follows;

Lead (II) bromide is an inorganic powdery substance that has a solubility in water of 0.973 g/100 mL at 20°C. It is insoluble in alcohol but is soluble in alkali, ammonia, NaBr, and KBr.

PbBr₂ is slightly soluble in ammonia, and it reacts with NaOH to produce Pb(OH)₂ and NaBr.

Taking the solubility product of PbBr₂ as [tex]K_{sp}[/tex] = 6.60 × 10⁻⁶, in a solution of 0.5 M NaBr, we have;

PbBr₂ → Pb⁺ + 2Br⁻

[tex]K_{sp}[/tex] = [Pb]·[2Br]²

Therefore, we get;

6.60 × 10⁻⁶ = [x]·[0.5]²

Where;

x = The number of moles of lead, Pb, in per liter of solution

∴ x = (6.60 × 10⁻⁶)/[(0.5 )²] = 2.64 × 10⁻⁵.

The molar solubility of PbBr₂ per liter of NaBr, x = 2.64 × 10⁻⁵ mol/L

PbBr₂ is more soluble in NaBr.

Given that ammonium ion NH₄Br  in water gives similar products to ammonia, NH₃, it is expected to be more suitable to dissolve PbBr₂ in NaBr.

Therefore, the best solution for dissolving PbBr₂(s) is NaBr, the correct option is option (2) add a solution of NaBr.

Learn more about solubility product here;

https://brainly.com/question/14300821

How many moles of tetracycline (C₂₂H₂₄N₂O₈) are in 71.9 grams

Answers

Explanation:

to find the number of moles for tetracycline you use the formula,

number of moles=mass/molar mass

the mass is given in the question which is 71.9g and the molar mass is 444.43(you find I by adding the number of atoms for each element in the compound,12×22+1×24+14×2+16×8)

n=71.9g/444.43

=0.16g/mol

I hope this helps

A substance is tested and has a pH of 7.0. How would you classify it?

Answers

You can classify it as neutral.

Tapeworm and Roundworn​

Answers

Answer:

Tapeworms and roundworms both belong to the same phylum however, their families are different from one another.

Tapeworms are flat, segmented intestinal parasites of the cat and dog and humans sometimes. They are present in the intestines of pets and depend on them, therefore, are parasites. These parasites look like tape which gives it its name.

Roundworms can also infect humans and the most common cases are among children. When not treated immediately, they can cause severe damage to a human host and can even cause blindness. Tapeworms are white in color with a long, segmented body.

What is the basic unit of chemistry?
O A. The bond
O B. The atom
O C. The sun
O D. The cell

Answers

Answer:

B. The atom

Explanation:

Cells are the most basic unit of structure and the smallest unit of matter is the atom.

Answer:

B. The atom

Explanation:

yeee it was right

11. An isotope Q has 18 neutrons a mass number of 34. (a) (i) What is an isotope? An isotope is one of two or C (b) Write its electron arrangement. Mass number=34 Number of neutrons=18 Number of Protons = 34-15-16 (c) To which period and group does Q belong? Protors - Electons - Atomic number Period - Group (d) How does Q form its ion?

Answers

An isotope is an element with the same atomic number but different mass number due to differences in number of neutrons.

electron configuration is 2,8,6.

Belongs to group 6 and period group 3.

It forms an ion by accepting 2 electrons

HBr can be added to an alkene in the presence of peroxides (ROOR). What function does the peroxide serve in this reaction

Answers

Answer:

Radical chain initiator

Explanation:

The peroxide here serves as a radical chain initiator. In the field of chemistry the radical initiatives are those substances that are used in industrial processes like polymer synthesis. These initiatives have weak bonds generally and they're mostly used to create free radicals. These radicals are atoms that have odd numbers of electrons. Peroxide is an example of such.

Part A
When the following liquids are poured into the same container, they separate as shown in the image. Based on the data
in the table below, what caused the order of the layers?
rubbing alcohol
vegetable oil
water
corn syrup
Mass
Liquid
corn syrup
water
Volume Used
95 cm
90 cm
85 cm
105 cm?
130.158
90.00 8
77.358
81.908
Density
1.37 g/cm
1 g/cm
0.91 g/cm
0.78 g/cm
vegetable oil
rubbing alcohol
I
B
X
Font Sizes
A- A -
E 3

Answers

Answer: The layers are ordered by density, with the least dense layer on top, and the densest layer on the bottom.

Explanation:

Plato

In an analysis of interhalogen reactivity, 0.350 mol ICl was placed in a 5.00 L flask and allowed to decompose at a high temperature.
2 ICl(g) I2(g) + Cl2(g)
Calculate the equilibrium concentrations of I2, Cl2, and ICl. (Kc = 0.110 at this temperature.)
I2 M
Cl2 M
ICl M

Answers

Answer:

[ICl] = 0.0420 M

[I₂]  = [Cl₂] = 0.0140 M

Explanation:

Step 1: Calculate the initial concentration of ICl

[ICl] = 0.350 mol / 5.00 L = 0.0700 M

Step 2: Make an ICE chart

        2 ICl(g) ⇄ I₂(g) + Cl₂(g)

I        0.0700     0         0

C        -2x          +x        +x

E    0.0700-2x      x          x

The concentration equilibrium constant (Kc) is:

Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²

0.332 = x/0.0700-2x

x = 0.0140

The concentrations at equilbrium are:

[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M

[I₂]  = [Cl₂] = x = 0.0140 M

Which process refers to the dissociation of Naci into Na+ and Ci+?

Answers

Answer:

dissolution is the process

Which of the following releases hormones into your bloodstream?
A. Endocrine system
B. Sympathetic nervous system
C. Lobal system
a
D. Autonomic nervous system

Answers

Answer:

answer is A. Endocrine system

Endocrine glands secrete hormones straight into the bloodstream. Hormones help to control many body functions, such as growth, repair and reproduction.

Answer:

A endocrine system

this is the answer

Chad drew a diagram to compare animal cells and bacterial cells.

Which label belongs in the area marked X?

Answers

Explanation:

Don't know wwwwmkbnkkkoo

Is Trygliceride a saturated or unsaturated molecule? Please explain.

Answers

Fats may be either saturated or unsaturated. A saturated fat is a fat that consists of triglycerides whose carbon chains consist entirely of carbon-carbon single bonds. ... An unsaturated fat is a fat that consists of triglycerides whose carbon chains contain one or more carbon-carbon double bonds.

The density of toluene (C7H8) is 0.867 and that of thiophene (C4H4S) is 1.065 g/ml. A solution is made by dissolving 10.00g thiophene in 250.00ml of toluene. a)Calculate the molarity of the solution
b)Assuming the volume are addictive ,calculate the molarity of the solution

Answers

Answer:

Calcular la molaridad de una solución que se preparó disolviendo 14 g de KOH en suficiente  

agua para obtener 250 mL de solución. (masa molar del KOH = 56 g/mol).

Resolución: de acuerdo a la definición de “molaridad” debemos calcular primero, el número de mol de soluto (KOH) que  

se han disuelto en el volumen dado, es decir, “se transforma g de soluto a mol de soluto” por medio de la masa molar,  

así:

56 g de KOH 14 g de KOH

----------------- = ------------------- X = 0,25 mol de KOH

1 mol X

Ahora, de acuerdo con la definición de molaridad, el número de mol debe estar contenido en 1000 mL (o 1 L) de  

solución, que es el volumen estándar para esta unidad de concentración, lo que se determina con el siguiente planteamiento:

0,25 mol X

----------------------- = ------------------------- X = 1 mol de KOH

250 mL de solución 1000 mL de solución

Explanation:

A Grignard reagent is prepared by reacting trans-1-bromo-1-butene with magnesium. What are the products of the reaction when this reagent is reacted with: a. Ethanol

Answers

Solution :

A Grignard compound or a Grignard reagent is defined as a chemical compound having a generic formula of  R−Mg−X.

Here, X = halogen

          R = organic group

The Grignard reagents are obtained by treating the organic halide  with a magnesium metal.

In the context, when  trans-1-bromo-1-butene is reacted with magnesium, a Grignard reagent is produced.

When this Grignard reagent is reacted with an ethanol, the following product is obtained in the attachment :

A graph of gas pressure versus the number of particles in a container is a straight line. Which other relationship will have a similar graph?​

Answers

Answer:

volume versus temperature, because they are also directly proportional.

Explanation:

Just took the test!

For centuries scientists found evidence that supports the theory of spontaneous generation. Which of the following
supported this theory?

A. The sun rising in the east and seeing in the west.
B. Maggots appearing on rotten meat.
C. The swan-next flask experiment.
D. All living things are made of cells.

Answers

Spontaneous generation theory is that living organisms can arise by non living things.

This theory follows the concept of abiogenesis where there is non living parent for a living child.

The appearance of maggots from rotten meat is the idea of abiogenesis, this creates a living organism with a dead parent.

The rotten piece of meat is a non living object but still maggots were formed from this.

Therefore the correct answer is B.

Answer:

a

Explanation:

During electrophilic aromatic substitution, a resonance-stabilized cation intermediate is formed. Groups, already present on the benzene ring, that direct ortho/para further stabilize this intermediate by participating in the resonance delocalization of the positive charge. Assume that the following group is present on a benzene ring at position 1 and that you are brominating the ring at positon 4. Draw the structure of the resonance contributor that shows this group actively participating in the charge delocalization.

-----OCH3

Answers

Answer:

See explanation and image attached

Explanation:

Aromatic compounds undergo electrophilic aromatic substitution reactions in which the aromatic ring is maintained.

Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene depending on the nature of the substituent present in the ring.

Substituents that activate the ring towards electrophilic substitution such as -OCH3 are ortho-para directing.

The major products of the bromination of anisole are p-bromoanisole and o-bromoanisole. The resonance structures leading to these products are shown in the image attached.

Convert the concentration of 0.700 M Na2SO4 to g/mol

Answers

To convert from mass concentration to molar concentration we use the formula;

Mass concentration = molar concentration * molar mass

Molar concentration of Na2SO4 = 0.700 M

Molar mass of Na2SO4  = 2(23) + 32 + 4(16) = 142 gmol-1

Hence;

Mass concentration = 0.700 M * 142 gmol-1

Mass concentration = 99.4 g/mol

To know more about concentration, see

https://brainly.com/question/23437000

why styrene undergoes and ionic polymerization at a faster rate than p methoxystyrene​

Answers

Answer:

In styrene, there is a phenyl group which is electron-withdrawing. So the electronic density in the double bonds increases, hence easy to associate as monomers. While in methoxystyrene, there is a carbonyl group which is not electron deficient. so no easy association with monomers.

Explanation:

[tex]{ \sf{styrene \: is \: phenylethene \: }} \\ { \sf{its \: polymer \: is \: polystyrene}}[/tex]

What volume of each solution contains 0.14 mol of KCl? Express your answer using two significant figures.
1.8 M KCl

Answers

Answer:

Solution given:

1 mole of KCl[tex]\rightarrow [/tex]22.4l

1 mole of KCl[tex]\rightarrow [/tex]74.55g

we have

0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g

74.55g of KCl[tex]\rightarrow [/tex]22.4l

10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

[tex]\:[/tex]

1 mole of KCl → 22.4l

1 mole of KCl → 74.55g

we have

0.14 mole of KCl → 74.55*0.14=10.347g

74.55g of KCl  → 22.4l

10.347 g of KCl → 22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

Given the following balanced reaction: 2Na(s) + F2(g) --> 2NaF(s)
a) How many moles of NaF will be made from 2.6 moles of F2?

b) How many moles of NaF will be made from 4.8 moles of Na?

Answers

Answer:

yes it is corrwect iyt is absolitle correct

Explanation:

Where do reactions in a solid generally take place?

A. At the center of the solid.
B. All throughout the solid
C. Only on opposite sides of the solid due to repelling forces.
D. On the surface of the solid.

Answers

Answer:

It's D.  On the surface of the solid.

Explanation:

If the reactant is a solid, the surface area of the solid will impact how fast the reaction goes. This is because the two types of molecule can only bump into each other at the liquid solid interface, i.e. on the surface of the solid. So the larger the surface area of the solid, the faster the reaction will be.

Other Questions
What is the area of the figure what are the evidences to support that the constitution of the kingdom of Nepal 2047 was more democratic than the constitution of the kingdom of Nepal 2015 ? list reasons . pals fast what are amplitude, period, phase shift and midline for f(x)=-4 cos (3x-pi)+2 Explain the self-correcting nature of science. HELP PLEASEEE!!!Identify the steps of the lytic cycle.The pieces made in replication areassembled to complete the new virusparticles.The new viral nucleic acid and viralproteins are replicated.The virus attaches to the host cell.The original virus releases a protein thatcauses the cell wall to burst (lysis), killingthe cell and releasing viruses.The host's DNA is disassembled and thevirus takes over the call's motoholi Which sentence uses the passive voice for the main verb?Answer:C "When we can pick our reading, mythology is most often chosen in my class." A retailer sold an electric item to a customer at a loss of 10 percent the customer purchase it for rs 25425 including 13, percent VAT calculate the cost price of the electric item to the retailer There are a lot of cells and tissues that support the developing embryo. How do you think this changes if the mother is a litter bearing animal such as cat, dog or mouse? (be sure to provide references to defend your answer complete the table of values for y=x^2-2 Naglakad si Ruben ng 900 sentimetro samantalang si Jaime ay naglakad ng 10 na metro. Gaano kalayo ang pagitan ng nalakad ni Jaime kay Ruben sa sentimetro? a. 200 cm c. 300 cm b. 100 cm d. 250 cm All of the following are basic elements to look for when determining the subject of a painting, exceptO time periodO colorO overall sceneO composition trigonometry Ration Which sentence is an example of an objective summary from Cynthia crossings a culinary wasteland? Can someone help me please ? A humanities professor assigns letter grades on a test according to the following scheme. A: Top 8% of scores B: Scores below the top 8% and above the bottom 62% C: Scores below the top 38% and above the bottom 18% D: Scores below the top 82% and above the bottom 9% E: Bottom 9% of scores Scores on the test are normally distributed with a mean of 67 and a standard deviation of 7.3. Find the numerical limits for a C grade. Hi there! please help with this. 5 = 6x2 + 24x5 = 6(x2 4x) inside the parentheses and .19 = 6(x 2)2StartFraction 19 Over 6 EndFraction = (x 2)2Plus or minus StartRoot StartFraction 19 Over 6 EndFraction EndRoot = x 2The two solutions are Plus or minus StartRoot StartFraction 19 Over 6 EndFraction EndRoot. Solve 5 to x-4 power =7 Coral Given three floating-point numbers x, y, and z, output x to the power of y, x to the power of (y to the power of z), the absolute value of x, and the square root of (x * y to the power of z). Output all results with five digits after the decimal point, which can be achieved as follows: Put result to output with 5 decimal places Ex: If the input is: 5.0 2.5 1.5 the output is: 55.90170 579.32402 5.00000 6.64787 Hint: Coral has built-in math functions (discussed elsewhere) that may be used. On April 1, 2021, Austere Corporation issued $320,000 of 15% bonds at 106. Each $1,000 bond was sold with 40 detachable stock warrants, each permitting the investor to purchase one share of common stock for $19. On that date, the market value of the common stock was $16 per share and the market value of each warrant was $3. Austere should record what amount of the proceeds from the bond issue as an increase in liabilities