An astronaut stands on the surface of an asteroid. The astronaut then jumps such that the astronaut is no longer in contact with the surface. The astronaut falls back down to the surface after a short time interval. Which of the following forces CANNOT be neglected when analyzing the motion of the astronaut?

Answer:

E) 1.27 Hz

Explanation:

       [tex]T = \frac{1}{76} min = 0.013 min = 0.79 sec. (1)[/tex]

      [tex]f = \frac{1}{T} = \frac{1}{.79sec} = 1.27 Hz (2)[/tex]

Answer:

C) 0.00026 Hz

Explanation:

       [tex]v = \lambda * f (1)[/tex]

       [tex]f = \frac{v}{\lambda} = \frac{700km/hr}{750 km} = 0.93 1/hr (2)[/tex]

       [tex]f = 0.93 \frac{1}{hr} *\frac{1 hr}{3600sec} = 2.6e-4 = 0.00026 Hz (2)[/tex]

Answer

100N on the left force

Explanation:

You have to subtract 250 - 100 and the reamaining would be 100 and that 100 would go to the left force since it was the higher number

(a) When the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed.

(b)  The region of atoms that interact in bonds is electric fields of particles with negative charge.

(c) Initial repulsion is low and increases as they approach.

(d) The force between the charges is 562.5 N.

This theory states that, the collision of particles (electrons) of matter is perfectly elastic. This implies that as the particles (electrons) collides with one another, kinetic energy is transferred from one electron to another.

ΔK.E = ΔP.E

Change in kinetic energy is equal to change in potential energy of the electrons.

Thus, when the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed. Decrease in speed implies decrease in kinetic energy and increase in potential energy.

Chemical bond is formed from the transfer or sharing of electrons between atoms. (electrons between atoms implies negative charge to negative charge)

Thus, the region of atoms that interact in bonds is electric fields of particles with negative charge.

This law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the distance between the charges.

[tex]F = \frac{kq_1q_2}{r^2}[/tex]

When the distance between the electrons are large, the repulsive force is low and the distance is small, the repulsive force is high.

The force between the charges is determined by applying Coulomb's law,

[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9\times (5 \times 10^{-5}) \times (2\times 10^{-6})}{0.04^2} \\\\F = 562.5 \ N[/tex]

Learn more about Coulomb's law here: https://brainly.com/question/24743340

Answer:

The last one

1m = 100 cm

Explanation:

If you do not trust me look it up

[tex]{\tt{\red{\underline{\underline{\huge{Answer:}}}}}}[/tex]

[tex]\longrightarrow[/tex] The rate of change of velocity per unit time is called acceleration.

[tex]\longrightarrow[/tex] Its SI unit is m/s².

[tex]\huge\boxed{\fcolorbox{blue}{red}{Thank you}} [/tex]

we have that from the Question"Which of the following is the cause of an acceleration?" it can be said that  

From the Question we are told

Which of the following is the cause of an acceleration?

Generally the equation for acceleration is mathematically given as

[tex]a=\frac{F}{m}\\\\or\\\\a=\frac{u-v}{dt}\\\\[/tex]

Therefore

So in the selection of the option consider these points of acceleration

For more information on this visit

https://brainly.com/question/22610586?referrer=searchResults

Answer:

C.

Explanation:

Return stroke

A return stroke is termed to be the most visible part of a lightning, which in itself is accompanied by a thunderstorm. Lightning causes thunder, which like I said, is a sound from the shock wave that develops like gases in the areas of the discharge. While experiencing a sudden increase in its pressure. Lightning occurs naturally and is electrically charged.

Answer: When substances are chemically combined, the properties of the new substances that are formed are often different from the properties of the original substances.

Explanation:

Answer:

a

Explanation:

If its not right choose D

Answer:

Answers at the bottom!!

Explanation:

For the first answer: Gamma ray

Gamma rays and x-rays consist of high-energy waves that can travel great distances at the speed of light and generally have a great ability to penetrate other materials. For that reason, gamma rays (such as from cobalt-60) are often used in medical applications to treat cancer and sterilize medical instruments.

For the second answer: They both have technological uses.

In my opinion I'm pretty sure it's A because we do use microwaves and x-rays as technological uses.

Hope this helps!!

Happy Holidays and Season Greeting!!

ii Feliz Navidad a todos !!

Gamma rays and x-rays consist of high-energy waves that can travel great distances at the speed of light and generally have a great ability to penetrate other materials. For that reason, gamma rays (such as from cobalt-60) are often used in medical applications to treat cancer and sterilize medical instruments.

"A gamma ray (g) is a packet of electromagnetic energy (photon) emitted by the nucleus of some radionuclides following radioactive decay." Gamma photons are the most energetic photons in the electromagnetic spectrum.

"An X-ray, or, much less commonly, X-radiation, is a penetrating form of high-energy electromagnetic radiation." Most X-rays have a wavelength ranging from 10 picometers to 10 nanometers, corresponding to frequencies in the range 30 petahertz to 30 exahertz and energies in the range 145 eV to 124 keV.

Know more about gamma rays here

https://brainly.com/question/23281551

# SPJ2

They both have technological uses.

Microwaves and x-rays have in common is all electromagnetic waves, electric and magnetic fields that oscillate together, perpendicular to each other.

"The application of practical sciences to industry or commerce." The methods, theory, and practices governing such application. a highly developed technology.  The total knowledge and skills available to any human society for industry, art, science, etc.

Microwaves are used in spacecraft communication, and much of the world's data, TV, and telephone communications are transmitted long distances by microwaves between ground stations and communications satellites. Microwaves are also employed in microwave ovens and in radar technology.

They are used on such products as aircraft and rocket parts and structures, canned and packaged foods, electronics, semiconductors and microchips, thermal insulations, and automobile tires. Material processing technologies use X-ray systems to automatically control the density or thickness of layers of substances.

Know more about microwaves and x-rays here https://brainly.com/question/15708046

#SPJ2

Answer:

4

Explanation:

The net force on the box a will be 20 N to the left and that on box b is 6 N downwards. The net force on box  c is 90 N to the left and that on box d is zero.

Force is an external agent acting on a body to change its motion or to deform it. The net force acting on a body depends on all the the forces with their magnitudes and directions.

If two same or different forces acts from the same direction they will add up and net force will be their sum. If they acts from the different directions, they will cancel each other in magnitudes.

In box a, the equal forces of 20 N opposes from each direction cancel and the net force will be 20 N to the left. I box b the 15 N cancel each other. Where the 4N and 2 N add up to have net force of 6 N downwards.

In box c, 10 N from opposite direction cancels and the 60 N and 30 N to the left add ups to have the net force of 90 N to the left. On box d, 5 N from opposite directions cancels as 12 N. Hence, net force is zero.

Find more on net force:

https://brainly.com/question/13410291

#SPJ5

Answer:

5 cm - 53 degrees

Explanation:

[tex] \sqrt{ {4}^{2} + {3}^{2} } = 5cm[/tex]

[tex] \tan ^{ - 1} (4 \div 3) [/tex] = 53°

Answer:

7.21m/s

Explanation:

Using the law of conservation of momentum expressed as;

m1u1 + m2u2 = (m1+m2)v

m1 and m2 are the mass of the man and the stone respectively

u1 and u2 are their respective initial velocities

v is their final common velocity

Given

m1 = 96kg

m2 = 75g = 0.075kg

u1 = ?

u2 = 0m/s (initial speed of the stone)

v = 7.2m/s

Substitute into the firmula and get u1

96u1 + 0.075(0) = (96 + 0.075)(7.2)

96u1 = 96.075(7.2)

u1 = 691.74/96

u1 = 7.21m/s

Hence the man acquired a speed of 7.21m/s

Answer:

50 km/h

Explanation:

200 km = 4 hours

200/4=50

50km/h

Answer:

v = 1.0 m/s

Explanation:

Answer:

b.  The objects velocity is decreasing.

Explanation:

I know this because if you read a graph left to right it will tell u whether it is increasing or decreasing.

Answer: Lightning is mostly light and electricity, this light that is hitting is going at a rate of 299,792.458 km per second (or 186,282 miles per second) this is so much compared to sound which only travels at about 761 mph (or approximately 332 meters per second). Fun fact: The lightening you are seeing is that coming back to the cloud because the process happens so fast.

Explanation:

Answer:

Light is faster than sound.

Explanation:

Answer:

newton - motion, gravity

kepler - orbital paths

brahe - the sun goes around the earth

Explanation:

im not sure about brahe but its the only one that makes sense

Answer:

The focal length is   [tex]f = -0.2 \ m[/tex]

The radius of curvature is [tex]R = -0.4 \ m[/tex]

Explanation:

From the question we are told that

       The magnification of the mirror is  [tex]m = \frac{1}{2}[/tex]

       The distance of the person from the mirror(the object distance ) is  [tex]u = - 1.0 \ m[/tex]

        The negative sign shows that it is been placed in front of the mirror

Generally the magnification of the mirror is mathematically represented as

       [tex]m = \frac{v}{u}[/tex]

=>   [tex]\frac{1}{4} = \frac{v}{-u}[/tex]

=>   [tex]v = \frac{- 1}{4}[/tex]

Generally from the lens equation we have that

        [tex]\frac{1}{f} = \frac{1}{u} + \frac{1}{v}[/tex]

=>     [tex]\frac{1}{f} = \frac{1}{-1 } + \frac{1}{-\frac{1}{4} }[/tex]

=>     [tex]f = -0.2 \ m[/tex]

Generally the radius of curvature is  mathematically represented as

         [tex]R = 2 * f[/tex]

=>      [tex]R = 2 * - 0.2[/tex]

=>      [tex]R = -0.4 \ m[/tex]

Answer:

The value is   [tex]F_L = 759200 \ N[/tex]

Explanation:

From the question we are told that

   The speed of air across the top of its wings is  [tex]v = 297 \ m/s[/tex]

   The speed of air below  its wings is [tex]u = 209 \ m/s[/tex]

    The density of air is [tex]\rho = 1.29 \ kg/m^3[/tex]

     The area of the wing is  [tex]A = 26.0 \ m^2[/tex]

Generally the lifting force is mathematically represented as

             [tex]F_L = \Delta P * A[/tex]

Here  [tex]\Delta P[/tex] is the difference in kinetic energy density between the top and the bottom  

   [tex]\Delta P = \frac{1}{2} * \rho * [v^2 - u^2 ][/tex]              

=>     [tex]\Delta P = \frac{1}{2} * 1.29 * [297^2 - 209^2 ][/tex]

=>     [tex]\Delta P = 2.92 *10^{4} \ Pa[/tex]

So  

      [tex]F_L = 2.92 *10^{4} * 26.0[/tex]

=>   [tex]F_L = 759200 \ N[/tex]

Answer: a or b can u pls give me brainlest

Explanation:A straight line is a curve with constant slope. Since slope is acceleration on a velocity-time graph, each of the objects represented on this graph is moving with a constant acceleration.

Answer:

Yes, it is easier to climb a slanted slope than a vertical or more steep slope.

Explanation:

On a vertical slope, you are climbing higher instead of farther so on each step gravity weighs you down much more than on a gentle slope

Answer:

B. Mass would be the same but its weight would be less on the Moon.

Explanation:

The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

Thus, the mass of a body is constant either on the Earth or on the Moon. But the weight would be less on the Moon because the gravitational force on the Moon is far less than that on the Earth. Therefore the weight would be less on the Moon.

The appropriate option is B.

The mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

The prime focus to solve this problem is the mass and weight of an object. The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

So, the mass of a body is constant either on the Earth or on the Moon. But the weight of an object will depend on the mass and the gravitational acceleration.

W = mg

Here, W is weight, m is mass and g is gravitational acceleration.

Weight would be less on the Moon because the gravitational force on the Moon is far less (due to lower value of g) than that on the Earth. Therefore the weight would be less on the Moon.

Thus, we can conclude that the mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

Learn more about the mass and weight here:

https://brainly.com/question/13040516

Answer: The correct answer is C

Explanation:

Answer:

An applied force, A resistive force

Explanation:

An applied force is an interaction of one object on another that causes the second object to change its velocity.

A resistive force passively resists motion and works in a direction opposite to that motion.

Answer:

true

Explanation:

Answer:

whatttttttttttttttttttttttttttt are the items we have to classify into simple machines and compound machine