An acceleration of 2m/s^2 is produced on a body by applying an effort of 50N. calculate mass of the body​

Answer:

Because of the interstellar dust and interior location of the solar system.

Explanation:

We will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal if we point a large optical telescope to the region because, the interstellar dust obscures the location of the spiral arm of the Milky way galaxy and this makes neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

Also, the interior location of the solar system also makes the neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

So, the interstellar dust and the interior location of the solar system makes it difficult to detect the neutral hydrogen that gives rise to the 21-cm radio signal with a large optical telescope.

Answer:

13.33 g/cm3

Explanation:

density = mass/volume

mass of irregular body = 800 grams

new volume = 60 cube cm

= density = 800/60  = 13.333 g/cm3

Answer:

7.894 MJ

Explanation:

Given that:

The mass of the saturated water vapor = 3.7 kg

The pressure of the saturated water vapor = 0.4 MPa

From saturated properties of steam tables when the pressure is at 0.4 Mpa

The enthalpy in (kJ/kg);

hf = 604.7 kJ/kg

hg = 2738.1 kJ/kg

The rejected heat during this process is:

Q = m(hg - hf)

Q = 3.7(2738.1 - 604.7) kJ/kg

Q = 3.7(2133.4) kJ/kg

Q = 7893.58 kJ/kg

Q = 7.894 MJ

The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.

The speed of the ambulance (source) is "6517 m/s"

The equation of Doppler's Effect is given as follows:

[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]

where,

[tex]f_o\\[/tex] = frequency of sound measure by observer  = 100 Hz

v = speed of sound = 343 m/s

[tex]v_o[/tex] = speed of observer = 0 m/s

[tex]v_s[/tex] = speed of ambulance (source) = ?

[tex]f_s[/tex] = actual frequency = 2000 Hz

Therefore, using the values, we get:

[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]

v_s = 6517 m/s

Learn more about Doppler's Effect here:

https://brainly.com/question/1330077?referrer=searchResults

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

Answer:

The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids

Answer:

The laws of liquid pressure:

The pressure that is inside the liquid rises with the intensity from the surface of a liquid.

The term fluid:

Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.

Every particle of mass is attracted to every other particle of mass.  The magnitude of the force between two objects is proportional to the product of their masses, and inversely proportional to the square of the distance between them.  The direction of the force is along the line between their centers.

(NOTE:  Newton's 3rd law of motion tells us that gravitational forces always come in pairs.  Between two objects, there are two forces ... one in each direction.  Their strengths are equal ... Your weight on Earth is exactly equal to the Earth's weight on YOU.)

Answer:

20m in 2 secs

Explanation:

t=2s

s=20m

hence the maximum height reached by stone is 20m in 2 s

Answer:

Mass = 0.04 Kg

Explanation:

Given the following data;

Density = 800 kg/m³

Volume = 5 * 10^{-5} m³

To find the mass of the object;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making mass the subject of formula, we have;

[tex] Mass = density * volume [/tex]

Substituting the values into the formula, we have;

[tex] Mass = 800 * 5 * 10^{-5} [/tex]

Mass = 0.04 Kg

perpose of lab is to store apparatus and do some experiment

Helps someone to know the exert lengh of something

Answer:

a)water is turning into ice it is changing it's state from liquid to solid

b)B to C  ice is melting and it  is changing  it's state from solid to liquid

C to D water is boiling and it is changing it's state from liquid to vapours(steam)

c) temperature

At A 0

At B 0

At C 100

At D 100

Explanation: The temperature will remain 0 degrees Celsius until all the ice becomes water and the temperature will remain 100 degrees Celsius until all the  water changes into steam.

Answer:

40 cm

Explanation:

We are given that

Load=800 N

Effort=200 N

Load  distance=10 cm

We have to find the effort distance.

We know that

[tex]load\times load\;distance=Effort\times effort\;distance[/tex]

Using the formula

[tex]800\times 10=200\times effort\;distance[/tex]

Effort distance=[tex]\frac{800\times 10}{200}[/tex]

Effort distance=[tex]\frac{8000}{200}[/tex]

Effort distance=40 cm

Hence,  the effort distance will be 40 cm.

Answer:

a. there is a pH gradient that parallels the electric field gradient.

Explanation:

Gel electrophoresis is a technique used to separate DNA fragments according to their size. DNA samples are loaded in the wells and then electric current is applied to pull the DNA fragments out from the gel. Isoelectric gel electrophoresis is a process in which negatively charged DNA fragments are separated from the gel.

Answer:

5.4

Explanation:

900/10=90 and 90(60)=5400 meters. 5400/100=5.4

Answer:

Diameter of wire = 0.00021 meters

Explanation:

Given the following data;

Number of windings = 30

Length of windings = 6.3 mm to meters = 0.0063 meters

To find the diameter of the wire, we would use this mathematical expression;

Length of windings = number of windings * diameter of wire

Substituting the values into the expression, we have;

0.0063 = 30 * diameter of wire

Diameter of wire = 0.0063/30

Diameter of wire = 0.00021 meters

answer is

Explanation:

A manometer is a device that measures air pressure using a container with a "U"-shaped tube open at one or both ends. In a closed manometer, a sample of gas is introduced into one end, which is then capped. ... This pressure represents the positive or negative difference between the gas pressure and atmospheric pressure

Answer:

2. In addition, the other end of the tube is left open to the atmosphere and it will be subjected to the pressure of approximately 1 atmosphere (atm).

3. Besides, the test pressure is greater than the pressure of 1 atm (atmosphere) the liquid in the column will be forced down by the pressure.

4. Furthermore, it will cause the liquid of the reference column to rise by an equal amount.

Answer:

Many difficulties would arise if there was a lack of uniformity in the measurement of various weights and measures between business, industry, individuals and countries. The biggest implications for a lack of uniformity are in health and safety, equity and sustainability.

Explanation:

palike nlng po

Answer:

6× 10¹⁰ metres

Explanation:

F=(G×M1×M2)/r²

(6.67×10¹⁶)=((6.67×10^-11)(6×10²⁴)(6×10²³))/r²

r²=3.6×10²¹

Therefore r=6×10¹⁰ metres

Answer:

A simple siphon raises water over a crest and discharges it at a lower level.It works coninueasly due to pull of gravity.

Explanation:

Siphons are tubes which draw fluid over the rim of a tank to a lower point. After an initial pressure change to initiate the flow, siphons operate continuously due to the pull of gravity.

Working:

A simple siphon raises water over a crest and discharges it at a lower level. As water flows through a siphon, energy due to pressure and elevation is either lost to pipe friction or converted to velocity energy.

Answer: C

Explanation:

Since bulb B is burnt out, the wires can't transfer to bulb A, so that's why bulb A will burn out.

If I get it wrong, sorry. Im still learning.

Answer:

no

Explanation:

they are metal and there property is strong and hard

Answer:

The result of pressure within a confined aquifer that creates a potentiometric surface

Explanation:

There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous  rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

Answer:

D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Explanation:

Newton's third law of motion states that for every action, there is an equal and opposite reaction. This speaks of equality in magnitude of force applied but in an opposite direction to one another.

According to this reaction, a car's tires exert a force on the track, this means that in accordance to Newton's third law, the track must exert an equal but opposite force on the car's tires. This causes the car to accelerate forward.

Answer:

57

Explanation:

Answer:

Wave-cut cliff, sea arch, sea stacks

Explanation:

The effect of a wave erosion is made obvious by the structures formed by the wave action.

The high areas of land adjacent to the incoming wave develop the early features or the formation of wave action, which includes the wave-cut cliff

The continuous undercutting of the cliff by the wave results in the formation of the wave cut platform

The effect of the wave further on a cliff, results in the formation of a sea arch and finally a sea stack

Therefore, the correct sequence is the wave-cut cliff, sea arch, sea stacks

Answer:

The new force will be 4times the original

Answer:

A submarine uses tanks that are filled with compressed air and when it is needed the air is released and takes on water which increase the density making it sink but when the water is pushed out the sub marine density is decreased making it float