Aluminum has a density of 2.70 g/mL. Calculate the mass (in grams) of a piece of aluminum having a volume of 417 mL .

Answer:

C

Explanation:

If he can't read his computer screen. Means his eyes have problem

A new member of your team is visually impaired. He's having a hard time reading his computer screen.  value diversity require computer usage. 12 Tell him that he might want to schedule an eye exam. Therefore, option C is correct.

Institutions and community members who value diversity do so in order to recognize the advantages of both their differences and commonalities. They make a deliberate effort to forge enduring connections between individuals and organizations with a broad membership.

When people's unique qualities, abilities, interests, and viewpoints are recognized and supported, they develop a stronger sense of self and health and achieve better results in their academic and professional endeavors.

Although diversity and inclusion are related ideas, they are not the same thing. Diversity has to do with representation or how something is put together. The degree to which the contributions, presence, and viewpoints of other groups of individuals are appreciated and incorporated into a setting is referred to as inclusion.

Thus, option C is correct.

To learn more about value diversity, follow the link;

https://brainly.com/question/13375809

#SPJ2

Suppose you have a material in it's liquid phase. As you give energy to that liquid, the temperature of the liquid will increase gradually, and the relation between the increase of temperature and the given energy is the specific heat.

Now, there is a point, a critical point, where the temperature stops to increase, which means that we are near a change of phase. So from this point on, the energy is not used to increase the kinetic energy of the particles (which would increase the temperature), the energy is used to break the bonds and allow a change of phase, for example, from liquid to gas.

So, we know that if you have a mol of water at 100°C, then you need to add 40.7 kJ of energy to change the phase of the water from liquid to gas phase.

This means that if you have a mol of water and you give that exact energy, the temperature will not change, instead, you now will have a mol of water at the temperature of 100°C.

Similarly with the case at 25°C (which happens for a particular pressure only)

So the heat of vaporization can not really be related to increases in temperature as you thought.

For changes in temperature, you need to use the specific heat.

We know that for water it is:

c = 4.184 J/g*°C = 76.15 J/mol*°C

So, if you want to increase the temperature from 25° to 100°

This means an increase of 75°C of one mol of water.

We just need to multiply the above number by:

1mol*(75°C)

Energy needed = (76.15 J/mol*°C)*1mol*(75°C) = 5,711.25 J

If you want to learn more, you can read:

https://brainly.com/question/11297584

Answer:

See explanation

Explanation:

The average speed of the molecules of a gas depends on the temperature of the gas and its molar mass and not on the volume of the gas.

The average velocity of a gas is given by; vrms=√3RTM

R= gas constant

T= Absolute temperature

M= molar mass of the gas

Where the temperature of the gas is held constant, the average velocity of gas molecules depends on the molar mass of the gas. Hence, if a sample of gas is slowly compressed to one-half of its original volume with no change in temperature, the average speed of the molecules in the sample of gas remains the same.

Explanation:

The given data is:

The mass of hydrogen is 6.54 kg.

The actual yield is 30.4 kg.

The balanced chemical equation of the reaction is:

[tex]N_2(g)+3H_2(g)<=>2NH_3(g)[/tex]

At first the theoretical yield should be calculated by using the balanced chemical equation:

3 mol. of hydrogen forms ---- 2 mol. of ammonia.

The molar mass of hydrogen is 2.0 g/mol.

The molar mass of ammonia is 17.0 g/mol.

Hence, the above statement can be rewritten as:

6g of hydrogen forms --- 34g of ammonia.

Then,

6.54g of hydrogen forms :

[tex]6.54 kg x 34 g / 6 g\\=37.1 kg[/tex]

% yield = (actual yield /theoretical yield )x 100

=(30.4 kg /37.1 kg )x100

=81.9

Hence, % yield is 81.9.

Explanation:

b. Bromo cyclopentane + HBr

Answer:

Have you ever touched a fish? Most fish will feel a bit rough - due to their scales. Some, like sharks, will feel like sandpaper. Even fish with small, smoother scales will feel a bit like that. Amphibians don’t have scales, and most species will be wet to some degree - they have to keep their skin moist or they’ll die. A few groups, like toads and newts, have rougher skin, which is heavier and thicker, which allows them to retain moisture better away from water.

Functionally, the big thing about amphibian skin is that it is semi-permeable. Amphibians can breathe through their skin - all amphibians can get some oxygen through their skin, but some species of salamanders get all their oxygen that way - they have no lungs or gills. The skin can also allow water in - sort of like a paper towel. The bad thing is that other chemicals can pass through the skin, too - pollutants and other chemicals tend to affect amphibians far more than they do other groups.

Amphibians also shed their skin - fish do not. People don’t tend to see frogs shedding their skin often, though, since they eat it to regain nutrients and other resources in the skin.

Finally, since amphibian skin offers no defense against predators in the way that scales do, and limited barrier against disease the way non-amphibian skin does (shedding helps), the skin of many amphibians contain toxins, and some of them have anti-fungal properties (typically due to symbiotic bacteria). Many species have evolved chemical defenses in the skin, while others have glands that produce toxins that can be secreted outside of the skin.

The skin can withstand dessication more than the fish.

They have moist skin used as respiratory surface during deep sleep / hibernation.

They have moist skin due to secretion of mucus by glands under the skin.

please mark me as brainliest

Answer:

I think its A maybe am not sure

Answer:

gamma ray

Explanation:

Answer:

gahwidsuacsgsuacayau1joagavahiq8wtw8quavakiafabajozyavqhaigavayquata

Explanation:

vahaiqgahiavavqugafayqigqvsbjsiagwyeiwvvs

Answer:

Molarity is a measure of concentration

I Hope its right if not so advance sorry :)

The molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.

Molarity is the amount or the number of moles present in per liter of the solution it is the unit to measure the concentration of the moles.

Unit of molarity will be moles per liter and the temperature does not affect the molarity of the solution. molarity can be calculated by dividing the concentration of the solution by the molar mass of the given element.

molarity = weight / mass ×  1000/ volume in liters.

With the help of this formula, we can calculate the molarity.

Therefore,  molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.

Learn more about molarity, here:

https://brainly.com/question/15532279

#SPJ2

The correct order of the substances in order of decreasing boiling point is,

KF , CH30OH , CO2 , Ne

Boiling point, the temperature at which the force exerted by the surroundings upon a liquid exists equaled by the pressure exerted by the vapor of the liquid; under this situation, the addition of heat affects the transformation of the liquid into its vapor without increasing the temperature.

The main difference between the boiling point and the melting point stands that the melting point is determined as the temperature at which solid and liquid phases exist in equilibrium, whereas the boiling point stands as the temperature at which the vapor pressure of a liquid stands equal to the external pressure.

Hence, The correct order of the substances in order of decreasing boiling point is,

KF , CH30OH , CO2 , Ne

To learn more about boiling point refer to:

https://brainly.com/question/5753603

#SPJ2

Answer:

-800 kJ/mol

Explanation:

To solve the problem, we have to express the enthalpy of combustion (ΔHc) in kJ per mole (kJ/mol).

First, we have to calculate the moles of methane (CH₄) there are in 2.50 g of substance. For this, we divide the mass into the molecular weight Mw) of CH₄:

Mw(CH₄) = 12 g/mol C + (1 g/mol H x 4) = 16 g/mol

moles CH₄ = mass CH₄/Mw(CH₄)= 2.50 g/(16 g/mol) = 0.15625 mol CH₄

Now, we divide the heat released into the moles of CH₄ to obtain the enthalpy per mole of CH₄:

ΔHc = heat/mol CH₄ = 125 kJ/(0.15625 mol) = 800 kJ/mol

Therefore, the enthalpy of combustion of methane is -800 kJ/mol (the minus sign indicated that the heat is released).

Explanation:

Hey there!

Charles law states that the volume of gas is directly proportional to the absolute temperature at constant pressure.

As the fact is, at a constant pressure the volume of fix amount of dry gas is directly proportional to absolute temperature from Charles law.

Since V and T are directly varying directly, we can write the equation using constant "k".

V/T = k

In this case the value of k depends on the pressure of gas, the amount of gas and also unit volume.

V/T = k .........(i)

Let us consider V1 and T1 the Volume and temperature of the ideal gases.

Then the equation is;

V1/T1 =k........(ii)

After this let change the temperature and volume be T2 and V2, respectively.

Then the equation is:

V2/T2 = k.......(iii)

Now; Equating equation (ii) and (iii)…

V1/T1 = V2/T2

So, this the formula. (i.e V1/T1 = V2/T2).

Hope it helps!

Answer:

21.5mL of a 0.100M HCl are required

Explanation:

The sodium phenoxide reacts with HCl to produce phenol and NaCl in a 1:1 reaction.

To solve this question we need to find the moles of sodium phenoxide. These moles = Moles of HCl required to reach equivalence point and, with the concentration, we can find the needed volume as follows:

Mass NaC6H5O:

1.000g * 25% = 0.250g NaC6H5O

Moles NaC6H5O -116.09g/mol-

0.250g NaC6H5O * (1mol/116.09g) = 2.154x10⁻³ moles = Moles of HCl required

Volume 0.100M HCl:

2.154x10⁻³ moles HCl * (1L/0.100mol) = 0.0215L =

Answer:

duw8 Wert gsi

Explanation:

pues pues y 8y1rcuecisscfjfj3eoeu xv cihskdkkd HD jekifeuifkeñ elijo eh fh FC eh SSH DJ djdvheshdhs

The mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.

Mass percent is defined as a way of expressing a concentration or describing a component in a particular mixture.

To calculate the mass percent of an element in a compound, divide the mass of the element in 1 mole of the compound by the molar mass of the compound and multiply the result by 100.

Mass percent = Mass of chemical / Total mass  of compound x 100

Mass of ore = 10 kg

% antimony in ore = 10.6%

                              = 10.6 / 100 = 0.106 g

Mass of antimony = 0.106 g

Mass percent = Mass of antimony / Mass of stibnite x 100

71.7% = 0.106 / X x 100

X = 0.106 x 1000 / 71.7 x 1000

  = 106 / 717 = 0.148 g

Thus, the mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.

To learn more about mass percent, refer to the link below:

https://brainly.com/question/5840377

#SPJ2

The compound in this reaction which is having the elemental ratio of 1:4:1 is NH₄Cl where nitrogen and chlorine are of one mole each with 4 hydrogens.

Elemental ratio of a compound is the ratio of number of atoms  of each  elements in that compound. The elemental ratio can be determined from the molecular formula of compounds.

The given reaction is a double displacement reaction. Here, the Cl group is replaced to the ammonia and OH group is replaced to the water. Thus, two species is replaced in the reaction.

In NH₄Cl, there are one nitrogen, 4 hydrogens and one chlorine atom. Therefore, the elemental ratio of the compound is 1:4:1. The elemental ratio of water is 2:1 and HCl is 1:1 and that in NH₄OH is 1:5:1. Hence, option b is correct.

To find more on elemental ratio, refer here:

https://brainly.com/question/17613193

#SPJ2

Answer:

12

Explanation:

2+8+2=12

atomic no is the No of protons

Answer:

Atomic number is 12.

Explanation:

Atomic number = electrons in filled shells + outermost electrons

= 2 + 8 +2

= 12

Your answer is CaO.I hope that my answer helped you..

In this figure, four shapes contains the same text as in the red oval. The text given in the red oval is KTKEIHLPEQMKJAPDEK.

Shape is "the form of an object or its outline, outer boundary or outer surface".

Text is "a collection of words or letters that are understandable by the reader".

Oval is a rounded and slightly elongated outline or shape like that of an egg.

Hence, four shapes contains the same text as in the red oval.

To learn more about oval here

https://brainly.com/question/24323155

#SPJ2

Answer:

catenation

Explanation:

Carbon atoms have four electrons to share in bonding environments to get to the ideal octet. To do this, it bonds with other carbon molecules, called catenation. Catenation is the ability of an atom to bond and share electrons with other atoms of its kind.

Answer:

361.4 pm is the length of the edge of the unit cell

Explanation:

First, let's calculate the average volume each atom is taking. Start with calculating how many moles of copper we have in a cubic centimeter by looking up the atomic weight. Atomic weight copper = 63.546 Now divide the mass by the atomic weight, getting 8.94 g / 63.546 g/mol = 0.140685488 mol And multiply by Avogadro's number to get the number of atoms: 0.140685488 * 6.022140857x10^23 = 8.472278233x10^22 Now examine the face-centered cubic unit cell to see how many atoms worth of space it consumes. There is 1 atom at each of the 8 corners and each of those atoms is shared between 8 unit cells for for a space consumption of 8/8 = 1 atom. And there are 6 faces, each with an atom in the center, each of which is shared between 2 unit cells for a space consumption of 6/2 = 3 atoms. So each unit cell consumes as much space as 4 atoms. Let's divide the number of atoms in that cubic centimeter by 4 to determine the number of unit cells in that volume. 8.472278233x10^22 / 4 = 2.118069558x10^22 Now calculate the volume each unit cell occupies. 1 cm^3 / 2.118069558x10^22 = 4.721280262x10^-23 cm^3 Let's get the cube root to get the length of an edge. (4.721280262x10^-23 cm^3)^(1/3) = 3.61426x10^-08 cm Now let's convert from cm to pm. 3.61426x10^-08 cm / 100 cm/m * 1x10^12 pm/m = 361.4 pm Doing an independent search for the Crystallographic Features of Copper, I see that the Lattice Parameter for copper at at 293 K is 3.6147 x 10^-10 m which is in very close agreement with the calculated amount above. And since metals expand and contract with heat and cold, I assume the slight difference in values is due to the density figure given being determined at a temperature lower than 293 K.

Answer:

43) protein

44) oxidoreductase

Answer:

I don't know What can I do.

Answer:

Cs> Ba> Pb>Si> P>O

Explanation:

Recall that atomic size decreases across a period and increases down the group.

As we move from Cs to Ba, the atomic size decreases across the period. Lead is larger than silicon since atomic size increases down the group.

Between phosphorus and oxygen, phosphorus is larger than oxygen as you move across the period.

The pressure of hydrogen gas is 607.7 mmHg

According of Dalton's law of Partial pressure, the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases in the mixture.

We can now write;

The for hydrogen collected over water, we have a mixture of hydrogen gas and water vapour.

Total pressure = pressure of hydrogen gas + vapour pressure of water

Pressure of hydrogen gas = Total pressure - vapour pressure of water

Pressure of hydrogen gas =  636 mmHg - 28.3 mmHg

Pressure of hydrogen gas = 607.7 mmHg

For more information see https://brainly.com/question/14119417

Answer:

As you know, one mole of any substance contains exactly

6.022

⋅

10

23

molecules of that substance - this is known as Avogadro's number.

Notice that you're dealing with more than

6.022

⋅

10

23

molecules of carbon dioxide, which means that you'll also be dealing with more than one mole of the compound.

More specifically, you'll have

1.5

⋅

10

26

molecules

⋅

1 mole CO

2

6.022

⋅

10

23

molecules

=

2.491

⋅

10

2

moles CO

2

Now, a substance's molar mass tells what the mass of one mole of that substance is. In carbon dioxide's case, its molar mass is equal to

44.01 g/mol

, which means that every mole of

CO

2

will have a mass of

44.01 g

.

In your case,

2.491

⋅

10

2

moles of

CO

2

would have a mass of

2.491

⋅

10

2

moles CO

2

⋅

44.01 g

1

mole CO

2

=

109.63 g

Rounded to two sig figs, the number of sig figs you have for the number of molecules of

CO

2

, the answer will be

m

C

O

2

=

110 g

Answer:

See explanation and image attached

Explanation:

The reaction of (R)-2-chloro-3-methylbutane with potassium tert-butoxide yields a monosubstituted alkene .

Since the base is bulky, the Hoffman product predominates because attack occurs at the less hindered carbon atom to yield the major product as shown.

The alkene reacts with HBr at the secondary carbon atom to yield a carbocation intermediate which is flat and planar. Attack on either face of the carbocation yields a racemic mixture of the (2R) and (2S) products.

Rearrangement of the carbocation to yield a tertiary carbocation gives the 2-bromo-2-methyl butane product as shown in the image attached.

Answer:

Sodium dihydrogenphosphate = NaH₂PO₄

Sodium monohydrogenphosphate = Na₂HPO₄

Explanation:

A buffer solution is a solution is a solution that resists changes to its oH when a little quantity of strong acid or strong base is added to it.

They are solutions of weak acids or weak bases and their salts known as conjugate base or conjugate acids respectively for the weak acids and weak bases.

For example, a solution of the weak acid ethanoic acid and its salt or conjugate base, sodium ethanoate serves as a buffer solution.

In biochemical experiments, where the pH of the reaction medium is kept as constant and as close as possible to that of the internal environment, buffer solutions are widely used. One of the commonly used buffers is the phosphate buffer. The phosphate buffer consists of the acid salts sodium dihydrogenphosphate and sodium monohydrogenphosphate. Sodium dihydrogenphosphate serves as the weak acid while sodium monohydrogenphosphate serves as the conjugate base.

The formulas of these two compounds are given below:

Sodium dihydrogenphosphate = NaH₂PO₄

Sodium monohydrogenphosphate = Na₂HPO₄