Option e; Centrioles are not part of the cytoskeleton.
A centriole is a cylindrical organelle found in cells that is primarily made of the protein tubulin. Centrioles are present in the majority of eukaryotic cells, but they are absent in conifers (Pinophyta), flowering plants (angiosperms), and the majority of fungi. They are only found in the male gametes of charophytes, bryophytes, seedless vascular plants, cycads, and ginkgo trees. A centrosome is a structure made up of a bound pair of centrioles that is encircled by a highly organized mass of dense material known as the pericentriolar material (PCM)[4]. Typically, centrioles consist of nine sets of small microtubule triplets that are organized in a cylinder shape. Crabs, Drosophila melanogaster embryos, and early Caenorhabditis elegans embryos all differ from this arrangement, having nine doublets and nine singlets, respectively. [5] [6] Other proteins are tektin, cenexin, and centrin.
Question:
Which of the following are not the components of cytoskeleton?
a)claudin b) actin c) keratin d) tubulin e)Centrioles
Learn more about Centrioles here:
https://brainly.com/question/909799
#SPJ4
Oil and methane hydrates are both physical ocean resources found beneath the seafloor. List two other similarities between oil and methane hydrates.
Crude oil is a mixture of nitrogen, sulphur, oxygen, and volatile hydrocarbons. Methane hydrate is a particular kind of clathrate made up of water and low molecular weight gases like methane.
Fossil deposits under the seafloor are what make up oil. It is an organic chemical that was created by the deposition of organisms on the seafloor. Additionally, methane hydrates are created after marine creatures deposit. Under the ocean's surface, one can find both oil and methane hydrates.
Similarities between both the Oil and methane hydrates are :
They both came from the ocean floor.They come from fossil fuels.They are created by decaying aquatic life.They are an energy source that is not renewable.They were mostly made of hydrogen and carbon.Both contribute to climate danger.Under high pressure and low temperature, they solidified.To learn more about Oil and methane hydrates refer here
https://brainly.com/question/2416366#
#SPJ4
What percentage is the smell from monomer on the Paper towel
Answer: It is the radiation of energy.
Explanation:
from each partial (valence level) orbital diagram, write the ground-state electron configuration and group number
The electron configuration and group number is 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10
What is electron configuration?Electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals. It describes the energy levels, orbitals, and the number of electrons in each of the atom's orbitals. Electron configuration provides an understanding of the atom's structure, reactivity, and the likelihood of chemical reactions to occur. It also serves as a predictor of the atom's physical and chemical properties. Electron configuration is determined by the number of protons in the nucleus and the principal quantum number of the electron.
This is the ground-state electron configuration for the element titanium, which is located in group 4 of the periodic table.
The 1s orbital is filled with two electrons, the 2s orbital is filled with two electrons, the 2p orbital is filled with six electrons, the 3s orbital is filled with two electrons, the 3p orbital is filled with six electrons, the 4s orbital is filled with two electrons, and the 3d orbital is filled with ten electrons. This configuration of electrons corresponds with titanium's position in group 4 of the periodic table, which contains elements with four valence electrons in the outermost energy level.
To learn more about electron configuration
https://brainly.com/question/29318232
#SPJ4
when applied research is conducted in settings outside the laboratory, which of the following can be a problem?
when applied research is conducted in settings outside the laboratory, the focus on a specific real world problem can be a problem.
The configuration and contents of laboratories are determined by the diverse needs of the specialists that work inside. A laboratory might have a particle accelerator or a vacuum chamber, whereas a metallurgy lab might have tools for casting, refining, or evaluating the strength of metals. A psychologist would utilise a room with one-way mirrors and covert cameras to examine behaviour in their lab, whereas a biologist or chemist might employ a wet laboratory. In laboratories, such as those where computer scientists typically operate, computers (and occasionally supercomputers) are sometimes utilised for either simulations or data processing. Scientists in other professions will continue to use a variety of labs. In laboratories, engineers build, assemble, and test technical objects.
The complete question is:
when applied research is conducted in settings outside the laboratory, which of the following can be a problem?
a. examines the basic laws of human behavior
b. is just as likely to occur in the laboratory as in the field
c. focuses on a specific real world problem
d. has no connection with theory
To learn more about laboratory click on the given link: https://brainly.com/question/28233400
#SPJ4
Suppose
17.0g
of potassium acetate is dissolved in
250.mL
of a
0.30M
aqueous solution of sodium chromate.
Calculate the final molarity of acetate anion in the solution. You can assume the volume of the solution doesn't change when the potassium acetate is dissolved in it.
Be sure your answer has the correct number of significant digits.
17.0g of potassium acetate is dissolved in 250.mL of a 0.30M aqueous solution of sodium chromate. The final molarity of acetate anion in the solution is 0.59 M.
The term "molar concentration" refers to the amount of a substance in a solution represented as a percentage of its volume. It is also used to refer to molarity, quantity concentration, or substance concentration. The most common unit used in chemistry to express molarity is the number of moles per liter, represented by the unit sign mol/L or mol/dm3 in SI units. One molar, or 1 M, of a solution's concentration is defined as one mol/L. Molarity is a unit of concentration used to describe chemical solutions (M). It is the number of moles of the solute in one liter of solution. This is not the same as the liters of solvent, to be clear (a common mistake). Despite being a useful unit, molarity has one fundamental flaw. Because temperature affects a solution's volume, it does not remain constant when it varies. Because you cannot directly measure solute in moles, you usually convert grams of solute to moles and then divide this amount by liters of solution.
To know more about molarity please refer: https://brainly.com/question/8732513
#SPJ4
At 25 °C, only 0.0140
mol of the generic salt AB is soluble in 1.00 L of water.
What is the sp
of the salt at 25 °C?
AB(s)↽−−⇀A+(aq)+B−(aq)
Correct task : At 25°C, only 0.0140 mol of the generic salt AB3 is soluble in 1.00 L of water. What is the Ksp of this salt at 25°C.
Solution:
When the salt dissolves, it dissociates as follows:
AB3 --> A3+ + 3B⁻
--S--------S-------3S--
The molar solubility (S) is the number of moles that can dissolve in 1 L of solution.
Molar solubility of salt is (0.0140 mol) / (1.00 L) = 0.0140 mol/L.
According to the dissociation equation:
Solubility of A3+ is 0.0140 mol/L and solubility of B⁻ is 3×0.0140 mol= 0.0420 mol/L.
[A3+] = 0.0140 mol/L.
[B⁻] = 0.0420 mol/L.
Ksp is the solubility product constant and calculated as follows:
Ksp(AB3) = [A3+] × [B⁻]3
Ksp(AB3) = [0.0140] × [0.0420]3
Ksp(AB3) = 10.37×10-7.
Ksp of this salt is 1.04×10-6.
Answer: 1.04×10-6 is the Ksp of this salt at 25°C.
in the dehydrohalogenation of 2-bromobutane which conformation below leads directly to thr formation of cis-2-butene
The conformation below in the dehydrohalogenation of 2-bromobutane results in the immediate production of cis-2-butene.
Dehydrohalogenation in chemistry is an elimination process that eliminates a hydrogen halide from a substrate. Although the reaction is frequently linked to the synthesis of alkenes, it has other uses as well.
A hydrogen halide is eliminated (removed) from a substrate during a dehydrohalogenation reaction. Although the reaction is frequently linked to the synthesis of alkenes, it has other uses as well.
The type of atoms or groups of atoms that leave the molecule serves as a frequent indicator of elimination reactions. Dehydrohalogenation, for instance, is the removal of a hydrogen atom along with a halogen atom; dehalogenation is the removal of two halogen atoms. Dehydration, on the other hand, is the removal of a water molecule, typically from alcohol.
Learn more about Dehydrohalogenation here:
https://brainly.com/question/7318445
#SPJ4
Which of the following compounds are the same?
Compound 1 is composed of 67 g of H and 33 g of F.
Compound 2 is composed of 29 g of Na and 71 g of Br.
Compound 3 is composed of 39 g of Na and 61 g of Br.
Compound 4 is composed of 33 g of F and 67 g of H.
A. Compounds 1 and 4
B. Compounds 2 and 3
C. Compounds 1 and 2
D. Compounds 2 and 4
The option among the given compounds that are the same compound is: Compounds 2 and 3
Th correct option is B.
What are compounds?Compounds are substances that are composed of two or more elements chemically combined together.
Compounds can be formed by the combination of two non-metals or a metal and a non-metal.
Compounds formed from the combination of two non-metals are covalent compounds.
Compounds formed from the combination of a metal and a non-metal are called ionic compounds since they form oppositely-charged ions.
Learn more about compounds at: https://brainly.com/question/26487468
#SPJ1
Which of the following cations is isoelectronic with argon? 1.potassium ion 2.calcium ion 3.scandium ion 4.All of these 5.None of these
Option 1 is correct because potassium ions in argon contain 18 electrons. Thus, there are 18 isoelectronic in all that are present in Ar for K+. The electrical arrangement of these two ions is the same as that of Ar.
K+ and Cl ions are hence isoelectronic with Ar. Argon is isoelectronic with potassium ions that have a positive charge. For an ion with a -1 charge to become isoelectronic with argon, it would only have needed to gain 1 electron. Chlorine must have been present there.
Similar to the previous element, the next one can create a monovalent cation by losing one electron and isoelectronizing with argon. These include the potassium cation, K+, the chloride anion, Cl, and the sulphide anion, S2. Isoelectronic ions are said to have the same number of protons and electrons.
To learn more about isoelectronic please click on below link
https://brainly.com/question/6807313
#SPJ4
Question 18
Identify the Type of Chemical Reaction: 2Ago - 2Ag + 02
1
Answer
F) Synthesis or Combination Reaction
G) Decomposition Reaction
H) Single Replacement Reaction
1 Double Replacement Reaction
K) Combustion Reaction
The given chemical reaction is type of decomposition reaction.
What is a decomposition reaction and how it takes place?One chemical splitting into two or more smaller molecules is known as a decomposition process. It is expressed as XY X + Y.
In this given question, the chemical reaction is:
[tex]2AgO[/tex] → [tex]2Ag + O_{2}[/tex]
Here, 2AgO decomposes into 2Ag and [tex]O_{2}[/tex]. That means a complex molecule is breaking down into two simple compounds.
A decomposition reaction is the exact opposite of a combination reaction. During decomposition, both exothermic and endothermic events can occur. One important application of decomposition processes is the extraction of metals from their ores. For instance, zinc can be recovered from calamine by subjecting it to a breakdown reaction.
Know more about types of chemical reaction at:
https://brainly.com/question/24209013
#SPJ1
curved arrows are used to illustrate the flow of electrons. follow the arrows to predict the intermediate and product of reaction nah
The arrows are used to illustrate the flow of electrons. follow the arrows to predict the intermediate and product of reaction , the product is :
CH₃ - C -CH₃ + H₂O + ⁻OCH₃
||
O
The reaction is in between the 2 methoxypropan-2-ol and the hydroxide ion. the OH⁻ ion is the strong nucleophile and contain the negative charged. the hydroxyl group acts as a proton of the compound is acidic because of the electronegativity difference. the hydroxyl ion takes protons and form the water.
The reaction is given as follows :
OH
|
CH₃ - C - OCH₃ + OH⁻ ----> CH₃ - C -CH₃ + H₂O + ⁻OCH₃
| ||
CH₃ O
To learn more about reaction here
https://brainly.com/question/14583045
#SPJ4
Benedict test is commonly done for what?
The primary application of Benedict's test is to detect the presence of simple carbohydrates in an unidentified analyte.
Answer:
!
Benedict test is commonly done to detect
Which of the following conjugated diene would not react with a dienophile in a Diels-Alder reactions?
Which of these conjugated dying's will not react are dienes that are in cisoid forn, which can react in dieals alder. In general, electron-withdrawing groups on the dienophile speed up Diels-Alder processes.
The locked trans dienes do not react in the Diels-Alder reaction, whereas the cyclic cis dienes are so reactive that they may react with one another, making these conformations two extremes. Because one molecule serves as the diene and the other as the dienophile, for instance, cyclopentadiene dimerizes. Bridged bicyclic compounds are produced by cyclic dienes. Diels-Alder reactions can only occur in conjugated dienes with the s-cis structure. A diene cannot conduct a Diels-Alder reaction if it is not conjugated or cannot be in the s-cis configuration. Ring-based dienes are incapable of rotating, hence
To learn more about conjugated please click on below link
https://brainly.com/question/29870371
#SPJ4
Design a synthesis of 2-ethyl-2-hexenoic acid from alcohols of four carbons or fewer alcohols containing 4 carbons or fewer
The enolates are the anions from the ketones. synthesis of 2-ethyl-2-hexenoic acid from alcohols of four carbons is :
butan - 1 - ol ------> 2-ethyl-2-hexenoic acid
The enolates ions will acts as a nucleophile in the SN² reaction . The alkyl group will replace the alpha hydrogen and then the carbon carbon new bond is formed . synthesis of 2-ethyl-2-hexenoic acid from alcohols of four carbons is given as :
CH₃ - CH₂ - CH₂ - CH₂ - OH + PCC --- > CH₃ - CH₂ - CH₂ - C - H
||
O
+ NaOH ----> CH₃ - CH₂ - CH₂ - CH = C - C - H
| ||
C₂H₅ O
+ H₂CrO₄ -----> CH₃ - CH₂ - CH₂ - CH = C - C - OH
| ||
C₂H₅ O
2-ethyl-2-hexenoic acid
To learn more about 2-ethyl-2-hexenoic acid here
https://brainly.com/question/15319080
#SPJ4
Which of the following is the correct Lewis structure for the molecule NH3?
N=H
Option 1
H-N-H
Option 3
-I
H
H=N:
Option 2
H-N-H
H
Option 4
The Lewis structure of ammonia, NH
3
, would be three hydrogen-bonded to a nitrogen atom in the middle, with a lone pair of electrons on top of the atom. This is the reason why ammonia acts as a Lewis base, as it can donate those electrons.
solution
OPTION 3 IS THE ANSWER
Any tips to learn the periodic table? Also what should I study (groups, numbers…)?
mechanism of action that will produce diuretic effect- increase the number of particles in the tubular fluid . True or False
True, mechanism of action that will produce diuretic effect- increase the number of particles in the tubular fluid.
When the kidneys filter too much body fluid, it is called diuresis. As a result, you produce more urine and need to use the restroom more frequently. Diuresis may be brought on by specific medical disorders or by taking drugs that boost urine production. This illness can also be caused by lifestyle choices. Water tablets or diuretics are drugs that assist the body in eliminating extra fluid. They are frequently prescribed for illnesses like high blood pressure, chronic renal disease, and heart failure.
The kidneys are told to expel more water and salt via diuretics. This lessens edema and improves blood circulation throughout the body.
To know more about diuretics, click here,
brainly.com/question/14421191
#SPJ4
Which of the following is the correct Lewis structure for the molecule NH3?
Answer:
Option 3 represents correct Lewis structure for NH3
The decomposition of a single compound at 349 K has a rate constant of 4.10 x 10-3 M s1. If the initial
concentration of the reactant is 1.304 M, what is the concentration of the reactant after 90.45 seconds?
(the answer should be entered with 3 significant figures; do not enter units; give answer in normal
notation-examples include 1.23 and 12.3 and 120. and -123)
Selected Answer:
Correct Answer:
0.933
0.933 ±1%
Answer: To solve this problem, you can use the first-order rate equation, which is given by:
[reactant] = [reactant]0 * e^(-k*t)
where [reactant] is the concentration of the reactant at time t, [reactant]0 is the initial concentration of the reactant, k is the rate constant, and t is the time.
Plugging in the given values, we get:
[reactant] = 1.304 M * e^(-4.10 x 10^-3 M s^-1 * 90.45 s)
= 1.304 M * e^(-0.0366)
= 1.304 M * 0.933
= 1.21 M
To express the answer with 3 significant figures, you can round the answer to 1.21 M. Therefore, the concentration of the reactant after 90.45 seconds is 0.933 ± 1%.
suppose of ammonium sulfate is dissolved in of a aqueous solution of sodium chromate. calculate the final molarity of ammonium cation in the solution. you can assume the volume of the solution doesn't change when the ammonium sulfate is dissolved in it. round your answer to significant digits.
The final molarity of the ammonium cation in the solution is 0.066M.
Firstly, we need to calculate the number of moles of ammonium sulfate:
No of moles = mass(g)/molar mass
No of moles = 2.57/132.14
No of moles = 0.0195 mol
When ammonium sulfate dissolves in sodium chromate, the following reaction will take place:
(NH₄)₂SO₄ + Na₂CrO₄ ------> (NH₄)₂CrO₄ + Na₂SO₄
No of Moles of sodium chromate = molarity x volume
= 66 x 0.200
No of moles of Sodium Chromate = 0.0132 mol
According to the reaction, 1 mol of sodium chromate produces 1 mol of ammonium chromate.
In this reaction, the sodium chromate amount is less than ammonium sulfate.
It can be concluded that Sodium chromate is a limiting reagent.
Therefore 0.0134 mol of ammonium cation is present in the resulting solution.
Molarity of ammonium cation = 0.0134 mol / 0.2 L
Molarity = 0.066 M
Therefore, 0.066M is the Molarity of the ammonium cation.
To know more about the concentration of compounds, click here:
https://brainly.com/question/17206790
#SPJ4
Water boils at 100 degrees Celsius. What is the boiling point for water on the Kelvin scale? K = °C + 273 and °C = K - 273
Answer:
the answer is 373
Explanation:
K=°C + 273
K=100+273=373
Define the following: Renwable energy and non-Renwable energy.
A resource can be classified as renewable or nonrenewable based on whether it can replace itself at the rate it is used up or whether it has a finite supply.
What exactly is renewable energy?Energy obtained from natural resources that are renewed more quickly than they are used up is referred to as renewable energy. Such sources that are constantly replenished include the sun and the wind, for instance. Non-renewable energy comes from energy sources that will ultimately exhaust themselves or cannot be regenerated, not even after countless ages. Fossil fuels, such as petroleum, natural gas, and coal, are the non-renewable energy sources that are most often used.A resource can be classified as renewable or nonrenewable based on whether it can replace itself at the rate it is used up or whether it has a finite supply. Timber, wind, and solar power are examples of renewable resources, whereas coal and natural gas are examples of non-renewable resources.To learn more about Renewable energy refer to:
https://brainly.com/question/7995
#SPJ1
give the number of sigma bonds and pi bonds for the molecule below: 3 sigma bonds, 6 pi bonds 6 sigma bonds, 3 pi bonds 6 sigma bonds, 6 pi bonds 12 sigma bonds, 3 pi bonds
Benzene is a carbon and hydrogen compound with aromatic properties. The chemical formula for benzoene is C6H6.To determine the number of sigma bonds in this, we can create the skeletal structure using only sigma bond representations.
Let's show the structure of benzene.
As can be seen, there are six C-H bonds and six C-C bonds.
We may therefore say that benzene has a total of 12 sigma bonds in it.
When we look at the structure of benzene, we can see that it has three C=C bonds.
There are consequently 3 pi bonds and 12 sigma bonds. As a result, benzene contains 15 covalent bonds.
Since benzene has 12 and 3 sigma and pi bonds, respectively, the correct answer is that it does.
Additional
learn more about sigma bond here:
https://brainly.com/question/27758888
#SPJ4
Which of these reactions leads to a change in the hybridization of one or more carbon atoms? oxidation of an alcohol to yield a carboxylic acid neutralization of an amine using a strong mineral substitution of an aromatic ring using a halogen free radical halogenation of an alkane hydrolysis of an ester to yield an acid and an alcohol
All of these reactions can potentially lead to a change in the hybridization of one or more carbon atoms, but the extent of the change and the specific details of the reaction will depend on the specific reaction being considered.
Oxidation of an alcohol to yield a carboxylic acid: This reaction typically involves the addition of an oxygen atom to the carbon atom that was bonded to the hydroxyl group in the alcohol, as well as the removal of two hydrogen atoms. This can result in a change in the hybridization of the carbon atom, depending on the specific alcohol being oxidized and the conditions of the reaction.
Neutralization of an amine using a strong mineral acid: This reaction typically involves the addition of a proton to the nitrogen atom in the amine, as well as the removal of a hydroxyl group. This can result in a change in the hybridization of the nitrogen atom, depending on the specific amine being neutralized and the conditions of the reaction.
Substitution of an aromatic ring using a halogen: This reaction typically involves the substitution of a hydrogen atom on the aromatic ring with a halogen atom. This can result in a change in the hybridization of the carbon atom bonded to the hydrogen atom that is replaced, depending on the specific aromatic compound and the conditions of the reaction.
Halogenation of an alkane: This reaction typically involves the substitution of one or more hydrogen atoms on an alkane with a halogen atom. This can result in a change in the hybridization of the carbon atoms bonded to the hydrogen atoms that are replaced, depending on the specific alkane and the conditions of the reaction.
Hydrolysis of an ester to yield an acid and an alcohol: This reaction typically involves the addition of a hydroxyl group to the carbon atom that was bonded to the ester group, as well as the removal of the oxygen atom that was bonded to the same carbon atom. This can result in a change in the hybridization of the carbon atom, depending on the specific ester being hydrolyzed and the conditions of the reaction.
Find more about Hybridisation
brainly.com/question/17102306
#SPJ4
Radioisotopic dating estimates the age of objects based on the fact that the half-life of any radioactive isotope is _____.a fixed value
The time it takes for one-half of the radioactive parent isotope to decay into the daughter isotope is known as the half-life.
As a result, if we begin with 1 gram of the parent isotope, there will only be 0.5 gram of the parent isotope left after 1 half-life. The fundamental idea behind radiometric dating is that by comparing an isotope's presence in a sample to its abundance on Earth and its known half-life (rate of decay), you may determine the sample's age. A radiometric dating technique is radiocarbon dating, often known as carbon-14 dating. It determines the age of carbon-bearing by using the naturally occurring radioisotope carbon-14 (14C).
Learn more about isotope here-
https://brainly.com/question/27475737
#SPJ4
Draw the Lewis structures for
the following particles. Which
one can exhibit resonance?
A. CO3-²
B. N2
C. CH₂Br2
D. CO₂
The next particles are CO2. which may have resonance
What exactly does it entail to show resonance?Resonance is a method for describing delocalized electrons inside particular molecules or polyatomic ions when the bonding cannot be captured by a single Lewis formula. Numerous resonance structures can be used to depict a molecule or an ion when the electrons are delocalized in this way.
What is the primary objective of resonance?What are resonance structures used for Resonance is a term used in valence bond theory to describe how different contributing structure (or forms, also called as resonance structures and canonical structures) come together to generate a hybrid resonance (and hybrid structure) in certain ions or molecules.
To know more about resonance visit:
https://brainly.com/question/11353835
#SPJ1
Balance the Equation
________Fe+ ______ Cl₂ → ________ FeCl₃
Answer:
2Fe+2Cl2____2FeCl3
Explanation:
Fe has positive ions and hence to balance you add two ions to each side of the equation.
The Cori cycle is a metabolic pathway that involves active muscles and the liver. fatty acids glucose → glucose glycolysis → ATP gluconeo- genesis ATP CO2 + H2O lactate lactate LIVER MUSCLE Complete the sentences about the Cori cycle. Muscles break down into , which undergoes glycolysis. The end product of glycolysis in active muscles is , which is transported in the blood. The liver uses energy from to drive The produced in the liver is transported to the muscle in the bloodstream. Answer Banklactate pyruvate fatty acid oxidation glycolysis glycogen gluconeogenesis glucose
The process of moving lactate from cells that are engaged in anaerobic metabolism to the liver, where it is used to deliver glucose back to the cells, is known as the Cori cycle.
It serves as an illustration of one of the vital functions of the liver in ensuring that the body has an adequate supply of glucose. Gluconeogenesis has examples like the Cori cycle. It is true that the Cori cycle uses the liver's gluconeogenesis to change the lactate that muscles create into glucose. To be utilized by other cells throughout the body, this freshly created glucose is discharged into the blood. The Cori cycle, which transforms lactic acid into Glycogen, which can be used as a source of energy, prevents the excessive accumulation of lactic acid.
Learn more about process here-
https://brainly.com/question/13244046
#SPJ4
Draw structural formulas for the product formed by treating each compound with propylmagnesium bromide followed by aqueous HCl.
(a) CH2O
(b) (c) (d)
The structural formulas for the product formed by treating each compound with propyl magnesium bromide followed by aqueous HCl is given as follows :
CH₃CH₂CH₂ - CH₂ - OH
butanol
The propyl magnesium bromide , the formula is given as follows :
CH₃CH₂CH₂ -MgBr
when it react with compound CH₂O , the product formed is the butan - 1 - ol. the structural formula is given as follows :
CH₃CH₂CH₂ - CH₂ - OH
butanol
The propyl magnesium bromide is acts as grinard reagent which react with CH₂O and will form the alcohol, that butanol. here the CH₂O is called as the formaldehyde.
To learn more about propyl magnesium bromide here
https://brainly.com/question/27346672
#SPJ4
The equilibrium constant for a particular reaction has been measured at different temperatures. The results are plotted below: n A I/T Determine the correct thermodynamic properties for this reaction:(Warning!: There is a maximum of 2 attempts for this question) O endothermic with Aso o O exothermic with ASo < 0 O exothermic with aso > 0 O endothermic with ASo o O more information is needed Submit AnswerIncorrect. Tries 1/2 Previous Tries
Therefore, option an is the best choice and the equilibrium constant is 0.32. The best choice is that.
The equilibrium constant's value falls as temperature rises. An rise in temperature increases the value of the equilibrium constant when the forward reaction is endothermic. As the temperature fluctuates, so does the equilibrium position. For elements in their standard condition, G0f G f 0 is taken into consideration as zero. As a result, the reaction's standard change in Gibb's free energy at 25 degrees Celsius is 98.746 kJ. Since there is no longer any free energy to fuel the process at equilibrium, G=0.
Learn more about reaction here-
https://brainly.com/question/28984750
#SPJ4
