a.in which portion of the curve,
1. is the velocity uniform.
2.is the velocity increasing.
3.is velocity decreasing.
4.is acceleration zero.

B. at which point does the body start to move and stop.
________________________


I will mark as brainlist​

Answer:

To find the height the following formula should be used:  

v 2 = u 2 + 2aH

Explanation:

Assuming this occurs on earth,  a= 9.8 ms -2

 -2        2

12=0+2 x9.8 x H

144

_______ =H

2 x 9.8

H= 7.35m

Answer:

-29.9907

Explanation:

c = Q / (mΔT)

You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)

then you would solve

Answer:

products would appear after the raw materials

Explanation:

raw material + raw material = product (anything deriving from combining two materials)

Answer:

2.89 hours

Explanation:

given :

Vo = 72 km/h

Vt = 90 km/h

S = 234 km

find : the time taken (t) = ?

solution :

2.a.s = Vt² - Vo²

2.a.(234) = 90²- 72²

468.a = 8100 - 5184

= 2916

a = 2916/468 = 6.23 km/h²

so,

t = (Vt-Vo) /a

= (90-72)/ 6.23

= 18/ 6.23

= 2.89 hours

Answer:

The angle is 18.3 degree.

Explanation:

A uniformly charged infinite plane, density σ = 4 x 10^-9 C/cm^2, is placed vertically in air. A small ball of mass 8 g, with charge q = 10^-8 C, hangs close to the plane, so that the string is initially parallel to the plane. Take g = 9.8m/s2. When in equilibrium, by what angle is the string hanging the ball to the plane?

surface charge density, σ = 4 x 10^-5 C/m^2

Charge, q = 10^-8 C

mass, m = 0.008 kg

Let the angle is A and the tension in the string is T.

The electric field due to a plane is

[tex]E =\frac{\varepsilon \sigma }{2\varepsilon o}\\\\E =\frac{4\times 10^{-5}}{2\times 8.85\times 10^{-12}}\\\\E = 2.26\times 10^6 V/m \\[/tex]

Now equate the forces,

[tex]T sin A = q E.... (1)\\\\T cos A = m g ..... (2)\\\\divide (1) by (2)\\\\tan A = \frac{10^{-8}\times 2.6\times 10^6}{0.008\times 9.8}\\\\tan A = 0.33\\\\ A = 18.3 degree[/tex]

Answer:

Explanation:

The formula for centripetal acceleration is

[tex]a_c=\frac{v^2}{r}[/tex] . Filling in:

[tex]2.5=\frac{v^2}{15}[/tex] and

[tex]v=\sqrt{2.5(15)}[/tex] so

v = 6.1 m/s

Answer:

ME= 196.2 J

KE= 136.2

Explanation:

potential energy=mgh 2*9.81*10

Our ME is quivalent to PE as that is the toal amount of energy in the system

Kinetic energy= 1/2 m[tex]v^{2}[/tex]

to solve for kinetic enrgy we need to use a kinaetmtic equation that help us find velocity

vf= vi+at

but we need to find time first

d=vi+1/2(accelretaion)[tex]t^{2}[/tex]

7=0+1/2(9.81)[tex]t^{2}[/tex]

t= 1.19 s

vf= 0+ 9.81*1.19

vf= 11.67 m/s

Now

1/2 m[tex]v^{2}[/tex]

1/2*2*[tex]11.67^{2}[/tex]

= 136. 2

or we could just (PE/10)*7

so (196.2/10)*7

Answer:

0.2

Explanation:

The given parameters are;

The acceleration of the train, a = 0.2·g

The mass of the person standing on the train = m

Let μ represent the coefficient of static friction, we have;

The force acting on the person, F = m × a = m × 0.2·g

The force of friction acting between the feet and the floor, [tex]F_f[/tex] = m·g·μ

For the person not to slide we have;

The force acting on the person = The force of friction acting between the feet and the floor

F = [tex]F_f[/tex]

∴ m × 0.2·g = m·g·μ

From which we get;

0.2 = μ

The coefficient of static friction that must exist between the feet and the floor if the person is not to slide, μ = 0.2.

Answer:

[tex]N_B-W_B = 0[/tex]

Explanation:

There are two forces acting on object B. If we consider the law of equilibrium, then the two forces must be equal in magnitude, for the object to remain in equilibrium position:

[tex]N_B = W_B\\\\N_B-W_B = 0[/tex]

Therefore, the correct answer of the given question, from the given choices, is:

[tex]N_B-W_B = 0[/tex]

Answer:

The direction of friction force is toards north.

Explanation:

A tool box is at rest on the back of a track. The truck is accelerating towards north.

As the frame of reference is acceleratinf so it is a non inertial frame  of reference.

Thus, teh toolkit experineces a pseudo force towards the south direction.

According to the question, the toolbox is at rest so the fiction force is balances by teh psheudoforce, and thus teh friction force is acting toards north.

Answer:

[tex]v_y = 5\ m/s[/tex]

Explanation:

The vertical downward component of the speed of the bike can be simply found out by using the following geometric formula:

[tex]v_y = vSin\theta[/tex]

where,

[tex]v_y[/tex] = vertical downward component of speed = ?

v = speed = 10 m/s

θ = angle of slope = 30°

Therefore,

[tex]v_y = (10\ m/s)Sin\ 30^o\\v_y = 5\ m/s[/tex]

Answer:

The definition of acceleration is a change in the rate of motion, speed or action.

Acceleration is the rate of change of velocity.

[tex]acceleration = \frac{(final \: velocity - initial \: velocity)}{time} \\ or \\ a = \frac{(v - u)}{t} \\ \\ The \: S.I. \: unit \: of \: acceleration \: is \: \frac{m}{ {s}^{2} } \: or \: m {s}^{ - 2} [/tex].

My last year's notes on acceleration is attached. Hope it helps you!!

Answer:

1. 45 m

2. 50 m/s

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 20 m/s

Time (t) = 3 s

1. Determination of the position (i.e height)

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Height (h) =?

h = ½gt²

h = ½ × 10 × 3²

h = 5 × 9

h = 45 m

2. Determination of the velocity.

Initial velocity (u) = 20 m/s

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Velocity (v) =?

v = u + gt

v = 20 + (10 × 3)

v = 20 + 30

v = 50 m/s

Answer:6.26*10^-4

Explanation:

The magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

The number of magnetic field lines passing through a cross-section area defines the magnetic flux. It is denoted by ∅.

∅ = BAcosθ

Given is the magnetic field B = 0.152T, radius r = 0.04m and the angle of orientation θ=35.0 degrees

Area of cross- section A = πr² = 3.14 x ( 0.04)² = 5.024 x 10⁻³ m²

Magnetic flux, ∅ =  0.152 x  5.024 x 10⁻³ x cos 35°

∅ = 6.255 x 10⁻⁴ Weber

Thus, the magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

Learn more about magnetic flux.

https://brainly.com/question/24214683

#SPJ2

Answer:

A. New problem or discovery Engineering solution Development Research Explanation:

A possible  sequence of steps in the research and development cycle are  A. New problem or discovery Engineering solution Development Research​. In the  research and development cycle, the first step is the problem that a scientist observe. After that we have discover a solution for that problem through many research so the above materials are the possible sequence of steps in the research and development cycle.

Answer:

HEY THERE!

Explanation:

The temperature tells us the average speeds of the gas particles, which are held in the cluster by gravity, so we can use these speeds to determine the cluster mass

HAVE A GOOD DAY!

Answer:

This happens because the tin is made of estañum, and the estañum is denser than the water.

Remember the relation:

density = mass/volume

The general rule is that if an object is denser than water, it will sink

If an object is less dense than water, like a piece of wood, it will float.

And if an object has the same (or nearly the same) density as water, it will float, but fully submerged.

Based on that, we can conclude that the tin will sink because it's density is larger than the density of the water.

Answer:

All the sides and inner angles of a regular form must be equal. The sides and angles of an irregular form aren't the same. An equilateral triangle, for example, is a regular form because all of its sides and angles are the same length.

OAmalOHopeO

Answer:

Explanation:

This is a First Law of thermodynamics problem. We have to remember that the total energy available to a system is constant throughout the whole problem and that energy cannot be created or destroyed. So we need to find the total energy available right at the start. Well it just so happens that we are told that the total energy is 1000J and that it is all potential energy when the sphere is at rest and is 25 m off the ground. If the object isn't moving, all the energy is potential until it starts moving and the energy begins to convert from potential to kinetic a little bit at a time. The thing that we don't know is the mass of the shpere. Begin with the fact that the PE = 1000 (I'm going to se 2 sig fig's since there's only 1 in 1000). If

PE = 1000 and PE = mgh, then

1000 = m(9.8)(25) so

m = 4.1 kg

We also need the height at which this sphere has a PE of 600. Again, if

PE = 600 and PE = mgh, then

600 = (4.1)(9.8)h so

h = 15 Filling in the total energy equation now, using the fact that the total energy available to the system is 1000J:

TE = PE + KE and

1000 = (4.1)(9.8)(15) + [tex]\frac{1}{2}(4.1)v^2[/tex] and we are looking for v.

1000 = 6.0 × 10² + 2.1v² so

[tex]v=\sqrt{\frac{1000-6.0*10^2}{2.1} }[/tex] and

[tex]v=\sqrt{\frac{4.0*10^2}{2.1} }[/tex] gives us

v = 14 m/s

Answer:

39 m/s²

Explanation:

initial Velocity (u) = 9m/s

acceleration (a) = 1.5m/s²

time(t) = 20s

V=u + at

V=9 + 1.5(20)

V=9 + 30

V=39m/s

Answer:

0.25s

Explanation:

5/20 = 0.25s

This might be correct

Complete question is;

A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10m/s in 15 s, the car reaches a speed of 15 m/s in 55 s. which has the greater acceleration the car or the bicycle.

Answer:

The bicycle has the greater acceleration.

Explanation:

Cyclist reaches a top speed of 10m/s in 15 s.

Formula for acceleration here is;

a = v/t

a = 10/15

a = 0.67 m/s²

Car reaches a speed of 15 m/s in 55 s.

Thus;

a = 15/55

a = 0.27 m/s²

From the 2 acceleration values gotten, we can say that;

The bicycle has the greater acceleration.

Answer:

Explanation:

1)Melting:

Melting is the process by which a substance changes from the solid phase to the liquid phase. ... Melting occurs when the internal energy of a solid increases, usually through the application of heat or pressure, such that the molecules become less ordered.

2) liquefication:

In physics and chemistry, the phase transitions from solid and gas to liquid (melting and condensation, respectively) may be referred to as liquefaction. The melting point (sometimes called liquefaction point) is the temperature and pressure at which a solid becomes a liquid.

3) vaporization:

Vaporization, conversion of a substance from the liquid or solid phase into the gaseous (vapour) phase. If conditions allow the formation of vapour bubbles within a liquid, the vaporization process is called boiling. Direct conversion from solid to vapour is called sublimation.

4) Sublimation occurs as molecules of a substance in the solid state go to the vapor state directly, rather than through the liquid state. ... ⭕In terms of the kinetic molecular theory, we know that molecules are in constant random motion, even when the substance is below the melting point.

Answer:

Hence, the height of the ceiling at the center is 44.72 feet.

Explanation:

Consider that a whispering gallery has a length of 120 feet, and the foci are located 40 feet from the center.

Assume that the shape is a horizontal semi-ellipse with a center (0,0) and has the equation,

[tex]\frac{x^{2} }{ a^{2} } + \frac{y^{2} }{b^{2} } =1[/tex]  where a>b,

so,

2a = 120

a = 60

and

c = 40

Therefore, the equation of the ellipse is,

[tex]c^{2} = a^{2} -b^{2} \\\\40^{2} = 60^{2} -b^{2}\\\\b^{2} =2000\\\\b= 44.72.[/tex]

Answer:

Gravity

Explanation:

There's no gravity on space so you're floating

Answer:

Explanation:

Mass doesn't matter here because when something is falling, gravity plays fairly; an elephant falls at the same rate of acceleration as does a feather. What DOES matter is everything pertinent to the y-dimension of free-fall:

a = -9.8 m/s/s

v₀ = 0 (since the ball was held before it was dropped)

v = ??

Δx = -8 m (negative because the ball drops this far below the point from which it was released).

Putting all this together in one equation:

v² = v₀² + 2aΔx and filling in this equation:

v² = (0)² + 2(-9.8)(-8) and

v² = 156.8 so

v = 12.5 which rounds to 13 if you're using 2 sig figs, and rounds to 10 if you're only using 1 (which you should be, according to the way the numbers have been given in this problem)

Answer:

The answer is "planetesimals".

Explanation:

The uncountable little corpses of the accreted gas and dust were supposed to orbit the Sun while the planets were formed. The theory explaining the creation of the solar system as a whole is termed the quark-gluon plasma hypothesis.

An object produced by dust, rock, and other materials is called a planetesimal. This word is rooted throughout the microscopic idea, which shows that an object is too small to observe or quantify. Everywhere from many meters to hundreds of kilometers asteroids may acquire size.

Answer:

The dark lines in absorption spectrum of light is due capacity of atoms to absorb light of a specific energy. The absorption of light by atoms occurs when the atom transitions from a lower energy or ground state to an excited high energy state, and it appears in the emission spectrum of the element as dark lines located in the same position as the bright lines

Explanation: