Where ageList and gradeList contain information about students in a classroom. A programmer has already written the following code with that information. The program that will result in filteredNames only containing the names of students who are 17 or older is:
B- for var i=0 i<ages, length, i++) age=ages [i] if (age<17) appendItem filtered names , age (17 and names).
Who is a programmer?A programmer is a person who writes computer code. Computer code is a set of instructions that tell a computer what to do. Programmers use a variety of programming languages and tools to create computer programs, which are sets of code that can perform specific tasks or solve problems.
Programmers often work as part of a team to design, develop, and test new software applications or to maintain and improve existing ones.
They may work on a variety of projects, including creating websites, building computer games, designing mobile apps, or developing software for businesses.
Learn more about programmers:
https://brainly.com/question/11345571
#SPJ1
Answer:
D. "Analise", "Ricardo", "Tanya"
Explanation:
Determine the disruptive critical voltage, The visual corona inception voltage and
the power loss in a line due to corona, both under fair weather condition as well as
stormy weather condition for a 200km long 3 phase, 132kv line consisting of
conductors of diameter 1.04cm arranged in an equilateral triangle configuration with
4m spacing. The temperature of the surroundings is 50°c and the pressure is 750torr.
The operating frequency is 60Hz.
Take [The irregularity factor Mo-0.85, Mv-0.72]
The lowest phase-to-neutral voltage at which corona forms is known as the critical disruptive voltage. Vc represents it. Consider the following two parallel conductors with a distance d between them and a radius of r. Let V represent the voltage at the neutral phase.
In transmission lines, what is the visual critical voltage?Accordingly, the visual critical voltage is the lowest phase-neutral voltage at which the visual corona, or the development of the faint light glow of violet color all along the transmission line conductors, commences.
Corona's impact on conductor performance?Electrical surface gradients and performance of a conductor are influenced by its voltage, diameter, and shape, as well as by contaminants like dust and water drops and surface abnormalities like scratches.
To know more about voltage visit :-
https://brainly.com/question/13521443
#SPJ1
a 24-tooth gear has agma standard full-depth involute teeth with diametral pitch of 5. calculate the pitch diameter, circular pitch, addendum, dedendum, tooth thickness, and clearance.
A 24-tooth gear has full-depth involute teeth that are agma standard and have a diametral pitch of 5. Its circular pitch is 0.618 inches, addendum is 0.8333 inches, dedendum is 0.10417 inches, and diametrical pitch is 12.
What is a gear?A gear is a spinning, circular machine element with teeth that mesh with another toothed component to transmit torque. The teeth can be cut or inserted (called cogs in the case of a cogwheel or gearwheel). A gear's teeth prevent slippage, which is a benefit.
Diametrical pitch is what?Therefore, the diameter of the gear's pitch circle determines the gear's diametrical pitch. Depending on the measuring system employed, it is equivalent to the number of gear teeth per inch or per centimetre of its diameter.
Briefing:Tooth Number, N = 24
Diametral pitch pd = 12
Pitch diameter, d = N/pd = 24/12 = 2 inches
Circular pitch, pc = π/pd = 3.142/12 = 0.2618 inches
Addendum, a = 1/pd = 1/12 =0.08333 inches
Dedendum, b = 1.25/pd = 0.10417 inches
Tooth thickness, t = 0.5pc = 0,5 * 0.2618 = 0.1309 inches
Clearance, c = 0.25/pd = 0.25/12 = 0.02083 inches
To learn more about gears visit:
brainly.com/question/14455728
#SPJ4
while cleaning loose-tube fiber-optic cables, a technician gets some of the cleaning solvent near his eyes. which of the following should the technician check to see how to deal with the problem?
while cleaning loose-tube fiber-optic cables, a technician gets some of the cleaning solvent near his eyes. The technician check to see how to deal with the problem MSDS.
What is fiber-optic cables?An assembly comparable to an electrical cable that also contains one or more optical fibres that are used to convey light is referred to as a fiber-optic cable, also known as an optical-fiber cable.Typically, each optical fibre element is individually covered in plastic layers and housed in a protective tube appropriate for the location where the cable will be utilised. For example, long distance communications or delivering a high-speed data link between various portions of a building, different types of cable are utilised for different applications.Due to the difference in their refractive indices, the core and cladding layers of optical fibre are chosen for complete internal reflection. Practical fibres often have a layer of acrylate polymer or polyimides applied to the cladding.To learn more about fiber-optic cables refer to:
https://brainly.com/question/28902486
#SPJ4
In selecting a production facility location, labor supply would be most important to which of the following?
Jewelry manufacturer
Paper mill
Software designer
Steel manufacturer
In selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.
What is Labor supply?Labor supply may be defined as the number of persons willing to work at different wage rates. It depends upon the existing wage rate and is measured in terms of man-days.
Manufacturing or production refers to the process of turning raw materials or parts into finished goods through the use of tools, human labor, machinery, and chemical processing. It requires a regular labor supply in terms of production.
Therefore, in selecting a production facility location, labor supply would be most important to the software designer. Thus, the correct option for this question is C.
To learn more about Software designer, refer to the link:
https://brainly.com/question/26135704
#SPJ1
Confidentiality
deals with ensuring that data is protected against unauthorized access, and if the data are accessed by an authorized user, that the data are used only for an authorized purpose.
Yes, confidentiality is a key aspect of data security that involves protecting data against unauthorized access and ensuring that it is used only for authorized purposes.
Why is Confidentiality important?Confidentiality is important because it helps to prevent unauthorized individuals or organizations from gaining access to sensitive or confidential information, which could potentially be used for malicious purposes or to cause harm.
There are several ways to protect the confidentiality of data, including implementing strong access controls, encrypting data at rest and in transit, and regularly updating and patching software to prevent vulnerabilities that could be exploited by unauthorized users.
It is also important to have clear policies and procedures in place to govern how data can be accessed and used, and to ensure that authorized users understand and adhere to these policies.
To Know More About Encryption, Check Out
https://brainly.com/question/28283722
#SPJ4
an audio engineer recorded a sound and digitized the recording. he noticed that the sound quality deteriorated significantly after the recording was digitized. which of the following changes should he make in the digitizing process if he wants to ensure that the quality of recordings are better preserved when converting to a digital format in the future?
The audio engineer should increase the sampling rate to ensure that the quality of recordings are better preserved .
What is a sampling rate?The number of samples taken from a continuous signal per second or per other unit, to create a discrete or digital signal is known as the sampling rate or sampling frequency. Frequencies are measured in hertz (Hz) or cycles per second for time-domain signals such as sound waveforms and other types of audio-visual content. The Nyquist principle asserts that when the sampling frequency is larger than twice the maximum frequency of the signal being sampled, perfect reconstruction of the signal is feasible. The sound frequency range that can be represented by the digital waveform depends on the sampling rate and corresponds to pitch.A waveform's bandwidth is the spectrum of frequencies that it may represent.To learn more about sampling rate, refer:
https://brainly.com/question/29519477
#SPJ4
determine the internal normal force at point c , which is located just to the left of the 60- lb concentrated load. express your answer to three significant figures and include the appropriate units.
130.5 kN is internal normal force at point c.
What is internal normal force?The algebraic sum of the axial forces operating on either side of any segment of a structure is known as the normal force.
Support Reactions.a,
a+ΣMA = 0; By(60) - 1
Supporting Responses. Using the FBD of the full beam in Fig. an as a reference, a+MA = 0; By(6) - 1 2 (6)(6)(2) = 0 By = 6.00 kN
S+ ΣFx = 0; Bx = 0
Loadings within. Using Fig. b as an example, consider the FBD of the right segment of the beam sectioned via C.
S+ Σ Fx = 0; NC = 0 Ans. + cFy = 0; VC + 60.00 - 1. 2 (3)(3) = 0 VC
= -1.50 kN Ans. a+MC =
0; 60.00(3) - 1. 2 (3)(3)(1) - MC = 0
MC = 130.5
130.5 kN is internal normal force at point c.
To learn more about internal normal force refer to:
https://brainly.com/question/18724171
#SPJ4
Write a program that reads a list of integers from input into a vector and modifies the vector by shifting each element to the right one position and by shifting the last element to the first position. The input begins with an integer indicating the number of values that follow. Output the modified vector and end with a newline. Ex. If the input is \begin{tabular}{l|l|l} 4 & 6 & 8 \\ 12 \end{tabular} the output is:
12296−10
For coding simplicity, follow every output value by a space, including the last one. Run your program as often as you'd like, before submiting for grading Below, type any needed input values in the first box, then click Run program and observe the program's output in the second box 5.9.1: LAB. Shift right 2 main.cpp Load default template for () ( A... Shift oll elements to the right 1... Output updated list for Q 1 l.... ceturn 0 Run your program as often as you'd like, before submitting for grading. Below, type any needed input values in the first box, then click Run program and observe the program's output in the second box.
To use this program, you can enter the input values in the first box and click "Run program" to see the output in the second box.
How to write the C++ program?Here is an example of a C++ program that reads a list of integers from input into a vector and modifies the vector by shifting each element to the right one position and by shifting the last element to the first position:
#include <iostream>
#include <vector>
using namespace std;
int main()
{
// Read the number of values from input
int n;
cin >> n;
Program:
// Read the values into a vector
vector<int> v;
for (int i = 0; i < n; i++)
{
int x;
cin >> x;
v.push_back(x);
}
// Shift the elements to the right one position
for (int i = n - 1; i > 0; i--)
{
v[i] = v[i - 1];
}
// Shift the last element to the first position
v[0] = v[n - 1];
// Output the modified vector
for (int i = 0; i < n; i++)
{
cout << v[i] << " ";
}
// End with a newline
cout << endl;
return 0;
For example, if you enter "4 6 8 12" in the first box, the program will output "12 6 8 4" in the second box.
To Know More About C++, Check Out
https://brainly.com/question/13567178
#SPJ4
SIMD is a Computing architecture for common set of instructions across multiple datasets assigned to different processes in a parallel computing environment. When a parallel program is executed in 2 processors
(A) Both processors get same instructions and same data
(B) Both processors use same instruction but different parts of the data
(C) All processors are treated identical in terms of their performance
(D) Only one processor does all the work no matter how many processors are allocated in a parallel programming environment
options:
A. All the above
B. A and D
C. B and C
D. A and C
The Correct answer is C) B and C
Both processors use same instruction but different parts of the dataAll processors are treated identical in terms of their performanceWhat is SIMD?The taxonomy of Flynn's parallel processing includes single instruction, multiple data (SIMD) as a subtype. SIMD should not be confused with an instruction set architecture (ISA), which can be external (part of the software design) or internal (part of the hardware design). Computers with numerous processing components that execute the same action on numerous data points concurrently are referred to as SIMD.These machines take advantage of data level parallelism, but not concurrency: there are concurrent (parallel) computations, but each unit executes the same instruction at any one time (just with different data). Adjusting the contrast of a digital image or the volume of digital audio are two common tasks that SIMD is particularly useful for. SIMD instructions are a common feature of contemporary CPU designs, which boosts performance.To learn more about SIMD refer to:
https://brainly.com/question/29760610
#SPJ4
Which scientist developed the planetary model that stated electrons were found in specific energy levels around the nucleus?
engineered triply orthogonal pyrrolysyl-trna synthetase/trna pairs enable the genetic encoding of three distinct non-canonical amino acids.
Triply orthogonal pyrrolysyl-tRNA synthetase/tRNA pairs are a type of engineered genetic tool that can be used to encode three distinct non-canonical amino acids into proteins.
More about Amino acids :
These tools consist of three components: a pyrrolysyl-tRNA synthetase (PylRS) enzyme, a tRNA carrying a non-canonical pyrrolysyl amino acid, and a modified tRNA carrying a canonical amino acid. Together, these components enable the addition of the non-canonical amino acids in place of the canonical amino acids, thus allowing the creation of proteins with novel sequences and properties. These tools have been used to study protein function and to create synthetic proteins with novel properties, such as increased stability or enhanced binding affinity.
To know more about Amino acids
https://brainly.com/question/28409615
#SPJ4
Interior exit stairway doors must be able to open on ______ without any special knowledge, effort, or key.
Interior exit stairway doors must be able to open on Both sides without any special knowledge, effort, or key.
What is an exit access stairway?"An exit element that serves to meet one or more means of egress design requirements, such as the required number of departures or exit access travel distance, and is open to yards, courts, or public ways," is the definition of an outdoor exit stairway.
In Here, a building's design can incorporate an interior stairway that leads to the first floor. The pathway leads to a hallway that opens to the outside. Additionally, this corridor must maintain the same level of fire protection.
Therefore, Exit access refers to the section of a route leading to an exit. One instance of an exit access is a hallway on the fifth floor of an office building that connects to an enclosed stairway with a two-hour fire resistance rating and must remain open on all sides.
Learn more about exit stairway doors from
https://brainly.com/question/15020213
#SPJ1
When A Goal (Question) Unifies With A Rule Conclusion :- Condition. The Goal Needs To Unify With The O Condition
Answer:
For example, if the goal is to achieve financial independence and the rule is to save 10% of all income, then the condition would be to save 10% of all income in order to achieve financial independence.
Explanation:
objective in this assignment you will use the data definition language (ddl) component of sql to recreate the ms access flight school database in sql server and populate the tables with data. then you will use the data manipulation language (dml) component of sql to retrieve data from the database.
Note that to complete the assignment, you will need to follow these steps:
Create the database structure using DDL commands, such as CREATE TABLE and ALTER TABLE.Populate the tables with data using DML commands, such as INSERT INTO and UPDATE.Use DML commands, such as SELECT and WHERE, to retrieve data from the database.Test your queries to ensure that they are working correctly and returning the expected results.What is a Database?It is to be noted that a database is an organized collection of data stored and accessed electronically.
It typically includes tables of data and allows users to search, query, and manipulate the data in various ways. Databases are often used to store and manage large amounts of structured or semi-structured data, such as customer information, sales records, and inventory data.
They can be used to support a wide range of applications, including business, scientific, and government purposes.
Learn more database:
https://brainly.com/question/29412324
#SPJ1
Sketch the final shape of the crystal if the dislocations show below glide all the way across the crystal from one surface to the opposite one on the plane and in the direction indicated. a. Moves from left to right b. Moves from bottom to top c. Moves from left to right d. Moves from left to right The burgers vector is in the glide plane (as it must be!) and oriented at 45° to the line.
Edge dislocations can be attributed to the termination of an atom plane in the crystal's center.
An atom is what?Each chemical element is distinguished from the others by atoms, which are tiny particles of matter. An atom is composed of a core nucleus that is negatively charged and one or more electrons in orbit. The protons and neutrons that make up the nucleus are positively charged and moderately heavy.
What elements make up atoms?Quarks and electrons are the two main subatomic kinds that make up an atom. Around the atom's nucleus is a zone of electrons. The electrical charge on every electron is negative. The protons and neutrons that comprise the atom's nucleus are made up of quarks.
To know more about atom visit:
https://brainly.com/question/12231872
#SPJ4
The Bakken Formation in the western U.S. is reported to hold billions of barrels of oil. Assuming that 8 billion barrels of this oil is fully recoverable, is this a significant source of oil for the U.S.? (For this question, you can assume that the U.S. consumes 20 million barrels of oil per day.)
Group of answer choices
A. Yes, the 8 billion barrels is large enough for more than a decade of total U.S. oil needs
B. Yes, the 8 billion barrels is enough to significantly offset U.S. reliance on foreign oil
C. No, the 8 billion barrels is only enough to supply the U.S. for just over one year at present total consumption rates
D. None of the above
According to reports, the Bakken Formation in the western United States has billions of barrels of oil. Is this a major supply of oil for the U.S. if 8 billion barrels of this oil are fully recoverable? No, at the current total consumption rates, the 8 billion barrels will only be able to serve the United States for slightly over a year.
The United States of America, usually known as the US or America, is a country that may be found primarily in North America. It consists of 50 states, 9 Minor Outlying Islands, 5 Significant Unincorporated Territories, and 326 Indian Reservations. In terms of overall area and land, it is the third-largest country on the planet. The United States shares its land borders with Canada and Mexico, respectively, in its north and south. Its marine borders are shared by several nations, including Russia, Cuba, and the Bahamas. With a population of more than 333 million, it is the most populous country in the Americas and the third most populous country overall. The largest city in the nation and its financial centre is Washington, D.C.
Learn more about United State from
brainly.com/question/25713078
#SPJ4
aluminum metal undergoes the same basic corrosion process that iron does yet it does not decompose as rapidly. why?
Aluminum metal corrodes in the same way that iron does, but it does not decompose as quickly because aluminum oxide does not flake off just like rust and serves as a protective layer.
What is Rusting?
Rust is the chemical reaction that occurs when iron reacts with oxygen and water. However, the term "rust" is poorly defined in chemistry because many chemicals can be formed when iron is left exposed. However, the red, flaky appearance caused by certain chemicals is commonly referred to as rust.
In normal environmental conditions, corroding iron or steel produces a wide range of compounds. Depending on what molecules they pick up from the environment while rusting, some of these chemicals will be black, blue, yellow, gray, or brown. Acid rain, for example, can combine with iron to form molecules of pyrite, the yellow mineral known as "fool's gold". These minerals are not at all what we think of as rust. What we usually mean is an iron oxide (III) with a red or red-brown appearance.
To learn more about Aluminum metal, visit: https://brainly.com/question/27128704
#SPJ4
Locate the center of gravity of the volume generated by revolving the shaded area about the z axis. The material is homogeneous. Z^overBar = 2.50 ft Z^overBar = 3.00 ft Z^overBar = 2.80 ft Z^overBar = 2.67 ft
The location of the volume's center of gravity by rotating the shaded region around the z axis. The substance is homogeneous. Z=2.50 feet for ZoverBar.
Where does the volume's center lie?A body's geometric center is known as the centroid of volume. If the body's density is constant throughout, the centroid of volume serves as both the center of mass and the center of gravity. The ratios of integrals over the volume of the body are used to define the centroid of volume.
The volume center is it the same as the mass center?The center of mass is the same as the centroid of the volume if a continuous mass distribution has uniform density, which implies that is constant.
To know more about center of gravity visit :-
https://brainly.com/question/20662119
#SPJ4
. be familiar and be able to distinguish between wave summation and tetanus [complete/incomplete]). how do they differ from one another in terms of their contraction/relaxation properties at the level of percentage of cross-bridges formed and regulatory elements (ca2 )?
Multiple stimuli can be combined to produce a stronger muscle contraction through summation. Tetanus is the term for when multiple contractions are combined into a single, ongoing contraction.
Why does recovery from tetanus take longer?While recovery as rest interval increases indicates the return to Ca2+-free parvalbumin, relaxation slows as tetanus duration increases due to the increased saturation of parvalbumin by Ca2+. The relaxation rate in WT muscles remained somewhat faster during all tetanus durations.
Why did the tetanus muscle reaction differ from the summation muscle response?Tetanus is more tense because the buildup of calcium ions and newly created cross-bridges will make the contraction stronger over time.
To know more about contraction visit:-
https://brainly.com/question/2669219
#SPJ4
Consider the following delays for computation in each of the pipeline stages in a MIPS processor: IF:150psID:250psEX: 200 ps MEM:250psWB: 100 ps Given this, what is the latency of a load instruction in a five stage pipelined implementation of this MIPS processor?1000ps1250ps85025010 points Caches exploit and locality to reduce the overall time spent by processors in accessing data from the memory. 10 points Which of the following performance metrics does pipelining improve? Instruction execution time Instruction throughput Both of the above options None of the above
a. The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is given as follows: 950 ps.
b. The metrics improved by pipelining are given as follows:
Both of the above options. (execution time and throughput).
How to calculate the latency?The latency of a load instruction in a five stage pipelined implementation of this MIPS processor is calculated as the sum of the delays for each part.
The delays are given as follows:
150 ps, 250 ps, 200 ps, 250 ps, 100 ps.
Then the latency of the load instruction is calculated as follows:
150 + 250 + 200 + 250 + 100 = 950 ps.
What is pipelining?Pipelining is when a sequence of instructions can be executed concurrently, thus reducing the execution time and increasing the amount of instructions that can be executed in a period of time (improving the throughput).
This means that both the execution time and the throughput are improved through pipeling.
More can be learned about pipelining at https://brainly.com/question/13684647
#SPJ1
the double gear rolls on the stationary left rack r. the rack on the right has a constant velocity of 3 ft/s.
The angular velocity of the gear is 2.40 rad/s.
What is angular velocity?Angular velocity is the rate of change in the angle between two bodies or the rate at which an object revolves or rotates around an axis. This displacement in the figure is shown as the angle between a line on one body and a line on the other.
Angles or angular displacements are often expressed in engineering terms as degrees or revolutions (of 360°), and angular velocities as revolutions per minute (rpm). Typically, angles and angular velocities in mathematics and physics are expressed in radians and radians per second, respectively.
Through the following conversion factors, these measurements are related: One radian equals 1/180 (or 0.0175) of a degree, while one revolution per minute (or rpm) equals 1/30 (or 0.0105) of a radian.
Learn more about Angular velocity
https://brainly.com/question/1452612
#SPJ4
is it possible to assign logic levels so that a device with the transfer characteristics shown would serve as an inverter?
Is it possible to apply logic levels to a device with the transfer properties listed so that it can function as an inverter? If so, what are the input, output, low, high, and noise margins (VIL, VOL, VIH, and VOH)? (NML and NMH)
The exact same number of elements from Y are assigned to each element of X via a mathematical function from a set X to a set Y. Two Persian mathematicians named Al-Biruni and Sharaf al-Din al-Tusi are credited with providing the first known treatment of the idea of function. Functions were first used to describe the idealized relationship between two varying quantities. For instance, time affects a planet's position. Historical development of the concept coincided with the invention of infinitesimal calculus at the end of the 17th century, and the functions taken into account were differentiable until the 19th century.
Learn more about functions from
brainly.com/question/11624077
#SPJ4
Thinking Critically and Solving Problems
Posttest
Which step comes first in the decision making process?
A) Analyze the actions.
B) Collect information.
C) List all possible actions.
D) Identify the problem.
G
Submit
D) Identify the problem step comes first in the decision-making process.
What is decision-making?In psychology, decision-making (also spelled decision making and decisionmaking) is regarded as the cognitive process resulting in the selection of a belief or a course of action among several possible alternative options. It could be either rational or irrational. The decision-making process is a reasoning process based on assumptions of values, preferences and beliefs of the decision-maker. Every decision-making process produces a final choice, which may or may not prompt action. Research about decision-making is also published under the label problem solving, particularly in European psychological research. Decision-making can be regarded as a problem-solving activity yielding a solution deemed to be optimal, or at least satisfactory. It is therefore a process which can be more or less rational or irrational and can be based on explicit or tacit knowledge and beliefs. Problem solving and critical thinking refers to the ability to use knowledge, facts, and data to effectively solve problems.
To know more about decision-making visit:
https://brainly.com/question/16407152
#SPJ1
The pistons in an engine show how gas behavior can be applied to everyday events. Volume, temperature, and pressure of a gas are all involved in the working pistons. How are these factors related in pistons according to the Boyle's law?
According to Boyle's law, the piston rises, and these two factors—increasing pressure and decreasing volume—are associated in pistons.
Boyle's law, also known as the Boyle-Mariotte law or Mariotte's law, describes the relationship between the volume and pressure of a confined gas (especially in France). Boyle's law states that in a closed system with constant temperature and gas volume, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it fills. PV = k is the algebraic expression for Boyle's law. Volume times pressure equals some constant, which is identical to some constant k, where k is a constant, P is the gas's pressure, and V is the gas's volume. According to Boyle's Law,
Learn more about Boyle's law from
brainly.com/question/1696010
#SPJ4
During the synthesis of Indanthrene scarlet several sequential reactions take place in the same reaction flask. In the space provided below draw out the sequential reactions and list the name of the functional group formed at each step.
Sequential reactions are a series of linked reactions in which the output of one reaction serves as the starting material for another.
What is sequential mechanism?Sequential reactions are series of connected reactions where the outcome of the first reaction serves as the starting material for the second reaction. In crucial industrial processes like the chlorination of methane, sequential reactions take place.
The times when each chemical species reaches its peak were calculated using an analysis of a generalized sequence of three sequential reactions. Each species' differential rate laws were solved in order to ascertain the concentration of each species as a function of time.
Each solution produced the chemical species' concentration curve. Through slope-analysis, it was discovered that the concentration curves of species A1 and A2 had distinct maxima.
The concentration curve of the final product, A3, was approaching a limit but lacked a clear maximum.
To learn more about sequential reaction refer to:
https://brainly.com/question/934753
#SPJ4
Two tanks of the same volume are connected by a pipe containing a valve. Initially, the valve is closed, one tank is evacuated, and the other tank contains 40 g of steam at 15 bars and 280 C. The valve is opened and the steam flows into the evacuated tank until pressure equilibrium is reached. If the steam temperature at the end of the process is 440C in both tanks,determine
a. the final equilibrium pressure, in bars
b. the heat transfer, in kj
c. the entropy change, in kj / K, of the steam
d. the total entropy change, in kj / K
(a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K
(d) The total entropy change, in kj/K
How to Calculate the equilibrium and Entropy change?We should understand that insulated tanks deal with systems that has change with respect to the amount of heat transferred through its surroundings.
The given parameters are
h₁=2993.4KJ/kg
S₁=6.8402KJ/kh.K
V₁=0.163cm³/kg
All these values are drawn from the steam table
The tank volume can be determined first using the formula
V=mx
Volume = 0.00652m³ while the mass balance = 0.5m₁=mₙ
This implies that the specific balance is V₂=V/mₙ
V₂=0.3350KJ/kg
S₂=7.59KJ/kg.k
(a) The final equilibrium pressure in bars = P₂=10 bars
(b) The heat transfer, in kj is
m₂h₁+Q=m₂h₂
This implies that Q when made the subject is 14.264KJ
(c) The entropy change in kj/K of the steam is
Δs=0.03KJ/K
(d) The total entropy change, in kj/k steam is determined by
Δs=m(s₂-s₁) +Q/T
This implies that Δs=0.05KJ/K
In conclusion, (a) The final equilibrium pressure in bars = 10 bars (b) The heat transfer in Kj=14.264 KJ (c) The entropy change inkj/k of the steam = 0.03KJ/K
(d) The total entropy change, in kj/K
Learn more about equilibrium and entropy change on https://brainly.com/question/29696569
#SPJ1
Consider a system that has multiple processors in which each processor has its own cache, but main memory is shared among all processors.Which cache write policy would you use?With regard to this system, what problems are caused if a processor has a copy of memory block A in its cache and a second processor, also having a copy of A in its cache, then updates main memory block A? Can you think of a way (perhaps more than one) of preventing this situation, or at least of lessening its effects?
The Level 2 cache is lastly connected to the CPU but is external to it. The cache memory is made up of static random-access memory (SRAM).
What results does using a processor with a larger cache produce?CPU 2. 11. What results does using a processor with a larger cache produce? More room for frequently used data and instructions, more storage for extremely quick access, and faster instruction and data retrieval all result in faster processing.
Why do we place a cache between the CPU and main memory?A buffer between RAM and the CPU, cache memory is a very quick sort of memory. It stores data and instructions that are regularly requested so that the CPU can access them right away when necessary.
To know more about cache memory visit:-
https://brainly.com/question/16091648
#SPJ1
Consider the following set of processes, with the length of the CPU burst time given in milliseconds: The processes are assumed to have arrived in the order P1, P2, P3 P4, P5, all at time 0. a. Draw four Gantt charts that illustrate the execution of these processes using the following scheduling algorithms: FCFS, SJF, non-preemptive priority (a larger priority number implies a higher priority), and RR (quantum = 2). b. What is the turnaround time of each process for each of the scheduling algorithms in part a? c. What is the waiting time of each process for each of these scheduling algorithms? d. Which of the algorithms results in the minimum average waiting time (over all processes)?
A Gantt chart is a graphical representation of the tasks involved in a project and their corresponding deadlines.
How to get the Gantt charts and turnaround time?Here are the Gantt charts for the four scheduling algorithms, along with the turnaround time and waiting time for each process:
CFS:
Gantt chart:
|---P1---|---P2---|---P3---|---P4---|---P5---|
Turnaround time:
P1: 20
P2: 35
P3: 45
P4: 55
P5: 65
SJF:
Gantt chart:
|---P4---|---P3---|---P5---|---P2---|---P1---|
Turnaround time:
P4: 5
P3: 15
P5: 25
P2: 35
P1: 45
Non-preemptive priority:
Gantt chart:
|---P1---|---P2---|---P3---|---P4---|---P5---|
Turnaround time:
P1: 20
P2: 35
P3: 45
P4: 55
P5: 65
RR (quantum = 2):
Gantt chart:
|---P1---|---P1---|---P2---|---P2---|---P3---|---P3---|---P4---|---P4---|---P5---|---P5---|
Turnaround time:
P1: 18
P2: 34
P3: 50
P4: 66
P5: 82
Gantt Chart is commonly used to show the progress of tasks over time and to identify dependencies between tasks. In a Gantt chart, tasks are represented by horizontal bars that are plotted on a timeline.
The scheduling algorithm that results in the minimum average waiting time is SJF.
To Know More About SJF, Check Out
https://brainly.com/question/2567298
#SPJ4
Guidelines, forms, checklists, standards are:
Select the correct option(s) and click submit.
Guiding Principle, Mandates
What to do?
How to do?
Enablers/ Aids / Help
Answer:
What to do?
Explanation:
Guidelines, forms, checklists, standards are: What to do?
The correct options are:
Guiding PrincipleEnablers/ Aids / HelpWhat is a Guiding Principle?A guiding principle is a statement or a belief that provides guidance or direction for an organization or an individual's actions and decision-making. Guiding principles serve as a foundation for values, vision, and mission, and provide a framework for achieving specific goals and objectives.
In organizations, guiding principles can help establish a common understanding of what is expected of employees, how they should conduct themselves, and what their priorities should be. They can also help guide decision-making at all levels of the organization, from strategic planning to day-to-day operations.
Examples of guiding principles in an organization might include a commitment to customer satisfaction, a focus on continuous improvement, or a dedication to ethical behavior. These principles can help ensure that an organization operates in a consistent and purposeful manner, and can serve as a basis for measuring success and progress towards goals.
Learn more about Guiding Principle, here:
https://brainly.com/question/29775579
#SPJ2
In lab 2, assignment 2, you implemented a smoothing system using convolution with a box of length N and height 1/N: h1n=(un-un-N)/N. Find the coefficients {a, b} of the linear constant coefficient difference equation (LCCDE) describing this system for N=10. Find the coefficients for the system h1n=0.8nun
The smoothing system using convolution with a box of length N and height 1/N can be described by the following equation:
h1n=(un-un-N)/N
Step-by-step explanation:
To find the coefficients {a, b} of the linear constant coefficient difference equation (LCCDE) for this system, we can rewrite the equation as follows:
h1n = un/N - un-N/N
If we let a = 1/N and b = -1/N, we can express this equation as an LCCDE:
a * un + b * un-N = h1n
For N=10, the coefficients {a, b} are:
a = 1/10 = 0.1
b = -1/10 = -0.1
The coefficients for the system h1n=0.8nun can be found in a similar manner. If we let a = 0.8 and b = 0, we can express this equation as an LCCDE:
a * un + b * un-N = h1n
The coefficients for this system are:
a = 0.8
b = 0
Note that the LCCDE for the smoothing system using convolution with a box of length N and height 1/N is a first-order difference equation, as it depends on the current and previous values of the input signal (un and un-N). The LCCDE for the system h1n=0.8nun is also a first-order difference equation, as it depends only on the current value of the input signal (un).
To know more about System, visit: https://brainly.com/question/22946942
#SPJ4
