According to Newton's law of universal gravitation, how do the masses of two
objects relate to the gravitational force between them?
A. As either mass increases, the gravitational force between them
increases.
B. As either mass increases, the gravitational force between them
decreases.
C. Gravitational force increases only when both masses increase.
D. Gravitational force increases only when both masses decrease.
Answers
Answer:
As either mass increases, the gravitational force between them
increases.
Explanation:
According to Newton's law of universal gravitation;
F α m1m2/r^2
That is, the force between two masses in a gravitational field is directly proportional to the product of the two masses and inversely proportional to their distance apart.
Hence, as either of the masses increase, the force of gravitation between the two masses increases. Hence the answer.
Related Questions
5. The Rf of ibuprofen was found to be 0.32 when t-butyl methyl ether was used as the development solvent. What effect would there be on the Rf of ibuprofen if acetone had been used to develop the TLC plate?
Answers
Answer:
The Rf value of ibuprofen increases
Explanation:
TLC involves the elution of a solute using a mobile phase(solvent). The stationary phase is made of an adsorbent such as silica.
The extent of interaction between the solute and the mobile phase affects the Rf value. The greater the interaction between the solute and the solvent, the greater the Rf value.
On the other hand, the polarity of the solvent and the solute also affects the Rf value. If the solvent is changed from t-butyl methyl ether to acetone, the Rf value for ibuprofen increases because ibuprofen is polar and acetone is also polar hence there is greater interaction between the solvent and solute.
g A sample of chlorine gas starting at 681 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 513.7 mL. What was the initial volume, in mL, of the chlorine gas container if the process was performed at constant temperature?
Answers
Answer:
747.5 mL
Explanation:
Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:
P₁V₁ = P₂V₂Where in this case:
P₁ = 681 mm HgV₁ = ?P₂ = 991 mm HgV₂ = 513.7 mLWe input the data given by the problem:
681 mm Hg * V₁ = 991 mm Hg * 513.7 mLAnd solve for V₁:
V₁ = 747.5 mLChloride ion is a strong nucleophile and bromide is a good leaving group. The major product of treating (S)-2-bromobutane with NaCl in CH3C(O)CH3 (acetone) is _________. (1S,2R)-1-chloro-2-bromobutane cis-2-butene (1R,2S)-1-chloro-2-bromobutane (S)-2-chlorobutane trans-2-butene (R)-2-chlorobutane
Answers
Answer:
Chloride ion is a strong nucleophile and bromide is a good leaving group. The major product of treating (S)-2-bromobutane with NaCl in CH3C(O)CH3 (acetone) is _________. (1S,2R)-1-chloro-2-bromobutane cis-2-butene (1R,2S)-1-chloro-2-bromobutane (S)-2-chlorobutane trans-2-butene (R)-2-chlorobutane
Explanation:
The reaction of (S)-2-bromobutane with NaCl in CH3C(O)CH3 (acetone) forms the following product:
The answer is (R)-2-chlorobutane.
The reaction take splace through [tex]S_{N} _2[/tex] mechansim and inversion in configuration happens.
Question 1 Points 3 23 and Louis immerses his left hand in a beaker containing cold water and immerses his right hand in a beaker containing warm water. Then, he immerses both his hands on a beaker containing water at room temperature. Which of the following statements are true? 1. The hand that was in hot water would feel cold. 2. The hand that was in cold water would feel hot. 3. His two hands will feel the same hotness. Que O2 and 3 0 1 and 2 o 1 and 3 1.2, and 3
Answers
Answer:look down below
Explanation:
The statements that are true about hands that are immersed in the water are:
1. The hand that was in hot water would feel cold.
2. The hand that was in cold water would feel hot.
The correct option is B 1. and 2.
What is temperature?
Temperature is the measurement of the hotness or coldness of any object. It is measured in Celsius or kelvin. Our body has nerves that feel the different temperatures of any object. The high temperature is called hot and the low temperature is called cold.
When Louis put his hand in the warm water and one hand in the cold water. He feels the temperature of both glasses of water. Then he put both hands in the normal water.
So the hand that is warm would feel the water as cold and the hand with cold water would feel the water as hot.
Thus, the correct option is B. 1. and 2.
Learn more about temperature, here:
https://brainly.com/question/15267055
#SPJ5
43.0 mL of 1.49 M perchloric acid is added to 14.0 mL of calcium hydroxide, and the resulting solution is found to be acidic.
29.1 mL of 0.498 M barium hydroxide is required to reach neutrality.
What is the molarity of the original calcium hydroxide solution?
Answers
Answer:
2.29 M
Explanation:
Equation of the reaction;
Ca(OH)2(aq) + 2HClO4(aq) → 2H2O(l) + Ca(ClO4)2(aq)
Concentration of acid CA = 1.49 M
Concentration of base CB= ????
Volume of acid VA= 43.0 ml
Volume of base VB= 14.0 ml
Number of moles of acid NA = 2 moles
Number of moles of base NB = 1 mole
CAVA/CBVB = NA/NB
CAVANB =CBVBNA
CB= CAVANB/VBNA
CB= 1.49 × 43.0 × 1/14.0 × 2
CB= 2.29 M
15. You are interested in separating 4-methylbenzoic acid from 1,4-dimethoxybenzene using a procedure similar to the extraction procedure we used in lab. You plan to use sodium bicarbonate instead of sodium hydroxide. a) Show the reaction between salicylic acid and sodium bicarbonate. Label the acid, base, conjugate acid, conjugate base. b) Give the pKa values of the acid and conjugate acid. c) Which base will work better, sodium hydroxide or sodium bicarbonate
Answers
Solution :
a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.
In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.
b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]
c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]
Therefore, the equilibrium lies to the right and also the reaction favors the products and the separation works.
But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.
11th grade chemistry question will mark brainliest
2.50 g of CO2 gas is confined in a rigid cylinder at a pressure
of 4.65 atm. If 0.42 g of gas is released from the cylinder,
what is the new pressure?
Answers
Answer:
3.88 atm
Explanation:
We'll begin by calculating the number of mole of CO₂ in each case. This can be obtained as follow:
For 2.50 g of CO₂:
Mass of CO₂ = 2.5 g
Molar mass of CO₂ = 12 + (2×16) = 44 g/mol
Mole of CO₂ =?
Mole = mass / molar mass
Mole of CO₂ = 2.5 / 44
Mole of CO₂ = 0.06 mole
For 0.42 g of CO₂:
Mass of CO₂ = 2.5 g
Molar mass of CO₂ = 44 g/mol
Mole of CO₂ =?
Mole = mass / molar mass
Mole of CO₂ = 0.42 / 44
Mole of CO₂ = 0.010 mole
Finally, we shall determine the new pressure. This can be obtained as follow:
Initial mole (n₁) = 0.06 mole
Initial pressure (P₁) = 4.65 atm
Final mole (n₂) = 0.06 – 0.010 = 0.05 mole
Final pressure (P₂) =?
NOTE: Temperature and volume is constant.
P₁ / n₁ = P₂ / n₂
4.65 / 0.06 = P₂ / 0.05
Cross multiply
0.06 × P₂ = 4.65 × 0.05
0.06 × P₂ = 0.2325
Divide both side by 0.06
P₂ = 0.2325 / 0.06
P₂ = 3.88 atm
Thus, the new pressure is 3.88 atm.
Whate the mass percentage of Sulphure in Na2so4 ?
Answers
Answer:
Water H2O + SULPHATE OXIDE
3)O que são políticas públicas?
Answers
Answer:
azertyuiopazertyuiiop
what does LPG stand for? mention one important source of LPG give sort answer
Answers
Answer:
liquefied petroleum gas
LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.
Which safety feature works to slow down nuclear-fission chain reactions?
A. Proliferation
B. Control rods
C. Cooling rods
D. Fuel rods
Answers
Answer:
The answer is
-control rods
Answer:
B. Control Rods.... via A P E X
In a solution, the solvent is
ANSWER:
A. always water
B. dissolved in the solute
C. present in larger amount than the solute is
D. always nonpolar
Answers
Answer:
dissolved in the solute
Explanation:
A solvent is the component that dissolves the solute and is present in larger amount. The type of solution is determined by the state of the solute and solvent. If you have NaCl, a solid, dissolved in water, a liquid, the type of solution is a solid/liquid solution.
I don’t want to fail help
I need correct answer if u don’t know I will report
When the researcher compiled information which research method did they most likely utilize?
a) documentary
b) survey
c) participant observation
d) case study
Answers
Answer:
a
Explanation:
documentary is best researcher!.
Select the statement that correctly describes an endothermic process.
a. The enthalpy change for the process is negative.
b. Heat is lost by the system, but work is done on the system.
c. The enthalpy of the products is higher than that of the reactants.
d. The temperature change of the products is greater than that of the reactants.
e. Heat is released by the system, to the surroundings.
Answers
Answer:
C. The enthalpy of the products is higher than that of the reactants
Explanation:
An endothermic process is any process with an increase in the enthalpy of the system
The enthalpy of the products is higher than that of the reactants describes an endothermic process. Therefore, option (C) is correct.
What is the endothermic process?An endothermic process can be described as any thermodynamic process with an increase in the enthalpy H of the system. In such a process, a closed system commonly absorbs thermal energy from its surroundings.
An endothermic reaction leads to an increase in the temperature of the system and a decrease temperature of the surroundings. A physical process, such as the melting of ice cubes is an endothermic process.
Whether a process can take place spontaneously depends not only on the enthalpy change but also on the entropy change and absolute temperature.
An endothermic process commonly needs a favorable entropy increase (∆S > 0) in the system. In an endothermic process, the energy of the products is higher than that of the reactants.
Learn more about the endothermic process, here:
https://brainly.com/question/13818956
#SPJ5
1.Using the absorbance of the spinach extract and the equation of the trendline, determine the concentration of the extract solution. Report the concentration in moles/L (M).
2. Calculate the number of rams of chlorophyll-a in the 25ml, spinach solution.
3. Calculate the concentration of the chloropyhll-a soultion in spinach (mg chlorophyll-a/g spinach)
Trendline: y=1609x + .0055
Absorbance spinach extract lamda max: .329
Absorbacne spinach extract, 750 nm: .023
Corrected absorbance: .306
Mass of Spinach: .1876g Total Volume of spinach: 25mL
Answers
Answer:
Explanation:
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
∴
0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
No. of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
the volume = 25ml = (25/1000) L = 0.025 L
∴
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306ChlorophyllChlorophyll is any member of the class of the green pigments involved in the photosynthesis process.
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
so 0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
2. No.of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
The volume = 25ml = (25/1000) L = 0.025 L
Therefore:
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
3. In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
Read more about chlorophyll here:
https://brainly.com/question/3529377
Aluminum hydroxide, with heat, creates____
Answers
Answer:
Water and Aluminium oxide
Explanation:
Have a nice day.
What is the difference between conjugate acid-base pair?
a. a H atom. c. a mole water
b. a H+ ion d. a OH– ion
Answers
Answer:
b. a H+ ion
Explanation:
The concept of conjugate acid-base pair is related to Bronsted-Lowry acid-base theory and according to this theory, acid is a proton acceptor.
In short,
conjugate base is formed when an acid donates a proton.
conjugate acid is formed when a base accepts a proton.
How many alkenes are formed by E2 elimination of HBr from 3-bromo -3,4-dimethylhexane using a strong base such as sodium methoxide (NOTE: draw 3,4-dimethyl as anti configuration)
Answers
Answer:
2
Explanation:
2 alkenes are formed by E2 elimination of HBr from 3-bromo -3, 4 - dimethylhexane using a strong base such as sodium methoxide
Explain why the balls representing fluorine (teal) and hydrogen (white) have only one peg, while carbon (black) has four.
Answers
Answer:
Hydrogen and fluorine form only one bond while carbon forms four bonds to other atoms.
Explanation:
This question brings us to the idea of valency. Fluorine is univalent while carbon is tetravalent.
Univalent means that fluorine can only form one bond to hydrogen while carbon forms as much as four bonds because it is tetravalent.
Hence fluorine and hydrogen have only one peg while carbon has four.
Which is NOT an indicator of a chemical change?
Answers
Answer:
The choice that is not an indicator of a chemical change is "State of matter changes". More common than not, chemical reactions produce energy in the form of light or heat. Along with energy, they also produce a new substance called the product that could be in any state of matter (solid, gas, or liquid).
Explanation:
Assign oxidation state to each atom in each element ion or compound.
a. Ag
b. Ag+
c. CaF2
d. H2S
e.CO3
f. CrO4
g. Cl2
h. Fe
i. CuCl2
j. CH4
Answers
Answer:
a. [tex]Ag^0[/tex]
b. [tex]Ag^{+}[/tex]
c. [tex]Ca^{2+}F_2^-[/tex]
d. [tex]H_2^+S^{2-}[/tex]
e. [tex](C^{4+}O_3^{2-})^{-}[/tex]
f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]
g. [tex]Cl_2^0[/tex]
h. [tex]Fe^0[/tex]
i. [tex]Cu^{2+}Cl_2^-[/tex]
j. [tex]C^{4-}H_4^+[/tex]
Explanation:
Hello there!
In this case, according to the concept of charge balance, which tell us that the overall charge is zero for any compound, except ions, it turns out possible to proceed as follows:
a. [tex]Ag^0[/tex]
b. [tex]Ag^{+}[/tex]
c. [tex]Ca^{2+}F_2^-[/tex]
d. [tex]H_2^+S^{2-}[/tex]
e. [tex](C^{4+}O_3^{2-})^{-}[/tex]
f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]
g. [tex]Cl_2^0[/tex]
h. [tex]Fe^0[/tex]
i. [tex]Cu^{2+}Cl_2^-[/tex]
j. [tex]C^{4-}H_4^+[/tex]
Keep in mind lonely elements have 0 as their oxidation state.
Regards!
Please please help help please
Answers
One student measured a spectrum and observed double yellow lines. He claimed that it must be Sodium. Please justify if he is correct. Why
Answers
Answer:
We know that the student was measuring a spectrum, and observed double yellow lines, he claimed that it was Sodium.
There are multiple elements with double yellow lines, like Mercury or Sodium, but Sodium has two bright yellow lines, so it is usually identified by them.
So when we look at a spectrum and we see a strong doublet in the yellow range, we can easily assume that it is Sodium.
Here we assume that the student only saw the yellow doublet, this would imply that the yellow doublet is way more intense than the other lines, that can't be seen (while for other elements with double yellow lines, we should see other lines with similar intensity) then we can conclude that it is Sodium.
The student is correct.
Cal is titrating 57.7 mL of 0.311 M HBr with 0.304 M Ba(OH)2. How many mL of Ba(OH)2 does Cal need to add to reach the equivalence point?
Answers
Answer:
118.06 mL
Explanation:
The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:
2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O
According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:
2 moles HBr = 1 mol Ba(OH)₂
We can replace the moles by the product of the molar concentration (M) and volume (V):
2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂
Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:
V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂
= (2 x 0.311 M x 57.7 mL)/(0.304 M)
= 118.06 mL
Therefore, 118 mL of Ba(OH)₂ are needed.
Inbox
Question 1
Flagged
III
Initial Knowledge Check
Drafts
Sent
Write the symbol for every chemical element that has atomic number less than 14 and atomic mass greater than 23.2 u.
Answers
Answer:
8 oxygen. 9 flourine. 10. Neon. 5 Boron
13. What would you expect the pH of an aqueous solution of tertiary bromide in water to be (acidic, neutral, or basic)
Answers
Answer:
oshfjidgshsjdh
Explanation:
918474828
A 250 mL sample of gas at 1.00 atm and has the temperature increased to and the volume increased to 500 mL. What is the new pressure
Answers
Answer:
0.53atm = P2
Explanation:
Gas at 1.00atm and 20°C. Temperature increased to 40°C...
We can solve this question using combined gas law:
P1*V1 / T1 = P2*V2 / T2
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state.
Compunting the values of the problem:
P1 = 1.00atm
V1 = 250mL
T1 = 20°C + 273.15 = 293.15K
P2 = ?
V2 = 500mL
T2 = 40°C + 273.15 = 313.15K
1.00atm*250mL / 293.15K = P2*500mL / 313.15K
0.53atm = P2
How many atoms are in 5.70 x 10^32 mol of Rn?
Answers
5.70x10^32 x 6.02x10^23
= 3.43x10^56 atoms
There are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.
What is atom?The basic number of matter that may be broken even without producing electrically charged molecules is the atom.
Calculation of atom:
It is given that number of mol = 5.70 x [tex]10^{32}[/tex] mol.
Then, the number of atom = 5.70 x [tex]10^{32}[/tex] mol × 6.02 × [tex]10^{23}[/tex].= 3.43 × [tex]10^{56}[/tex] atom.
Therefore, there are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.
To know more about atom.
https://brainly.com/question/1566330
#SPJ3
a. Draw 2,3-dichloro octane.
b. Write the lewis structure for H20 molecule.
Answers
Answer:
a.draw 2,3 dicholoro octane
Explanation:
mag isip ka kung paano hehe
How much carbon dioxide is released when it is fully combusted with 4Kg of ethanol with more than enough oxygen? How do you work it out?
Answers
Answer:
7.640 kg
Explanation:
Step 1: Write the balanced complete combustion equation for ethanol
C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O
Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O
The molar mass of C₂H₆O is 46.07 g/mol.
4000 g × 1 mol/46.07 g = 86.82 mol
Step 3: Calculate the moles of CO₂ released
86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂
Step 4: Calculate the mass corresponding to 173.6 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg
