According to Boyle’s law, the volume of a gas is inversely proportional to its pressure if the _____.

temperature and number of particles are constant
number of particles and temperature decreases
temperature reaches absolute zero
number of particles and temperature increases

Answer:

10 x 10⁴

I hope it's helps you

Answer:

Yes

Explanation:

Answer:

By studying.

By paying attention to what the teacher is saying.

That's the way to receive knowledge.

HAVE A GREAT DAY

Explanation:

Please give me that little crown...

AND REMEMBER TO SMILE

Answer: The mass of copper liberated is 0.196 g.

Explanation:

The oxidation half-reaction of copper follows:

[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]

Calculating the theoretical mass deposited by using Faraday's law, which is:

[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)

where,

m = actual mass deposited = ? g

M = molar mass of metal = 63 g/mol

I = average current = 2 A

t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)

n = number of electrons exchanged = 2

F = Faraday's constant = 96500 C/mol

Putting values in equation 1, we get:

[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]

Hence, the mass of copper liberated is 0.196 g.

Answer:

similar type of electric charges attract one another

I think this is a coorect staement

Answer:

C ) An electroscope is used to determine the presence of electrostatic charges

Explanation:

Advantages of physical models include accuracy, safety, visualization, education, and trying things out that would be impossible in the real world due to safety, cost, or practical concerns. You can visualize things that are extremely tiny, happened millions of years ago, or that otherwise can't be viewed directly.

Answer:

A turndra B rainforest

Explanation:

Answer:

Explanation:

To find the horizontal component, the x component specifically, use the formula:

[tex]V_x=Fcos\theta[/tex] and for the vertical component, the y component, use the formula:

[tex]V_y=Fsin\theta[/tex]

where F is the magnitude of the force and theta is the angle in degrees.

For the x-component:

[tex]V_x=6cos250[/tex] so

[tex]V_x=-2.1[/tex] and depending upon whether this is a displacement vector or a velocity vector, the label would be meters/feet or m/s, respectively.

For the y-component:

[tex]V_y=6sin250[/tex] so

[tex]V_y=-5.6[/tex]

We know

[tex]\boxed{\sf Relative\:velocity(V_{AB})=V_A-V_B}[/tex]

[tex]\\ \sf\longmapsto V_{AB}=2-2[/tex]

[tex]\\ \sf\longmapsto V_{AB}=0m/s[/tex]

The vector difference between the velocities of two bodies : the velocity of a body with respect to another regarded as being at rest  compare relative motion

[tex]Relative velocity $\left(\mathrm{V}_{\mathrm{AB}}\right)=\mathrm{V}_{\mathrm{A}}-\mathrm{V}_{\mathrm{B}}$$$\begin{aligned}&\longmapsto \mathrm{V}_{\mathrm{AB}}=2-2 \\&\longmapsto \mathrm{V}_{\mathrm{AB}}=0 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

The relative velocity of an object with respect to another is the velocity with which one object moves with respect to another object. The unit of velocity can be referred to as the ratio of unit of distance and that of time. The SI unit of Relative velocity is meter per second.

The concept of absolute velocity is mainly used in turbomachinery design and defines the velocity of a fluid particle in relation to the surrounding, stationary environment. Together with the relative velocity (w) and the circumferential speed (u), it forms the velocity triangle.

To learn more about relative velocity, refer

https://brainly.com/question/24430414

#SPJ2

Answer:

13.759 % of the initial mechanical energy is lost as thermal energy.

Explanation:

By the First Law of Thermodynamics we know that increase in internal energy of the object ([tex]U[/tex]), in joules, is equal to the lost amount of the change in gravitational potential energy ([tex]U_{g}[/tex]), in joules:

[tex]\frac{x}{100} \cdot \Delta U_{g} = \Delta U[/tex] (1)

Where [tex]x[/tex] is the percentage of the energy loss, no unit.

By definition of the gravitational potential energy and internal energy, we expand this equation:

[tex]\frac{x\cdot m \cdot g \cdot h}{100} = m\cdot c\cdot \Delta T[/tex] (1b)

Where:

[tex]m[/tex] - Mass of the object, in kilograms.

[tex]g[/tex] - Gravitational acceleration, in meters per square second.

[tex]h[/tex] - Initial height of the object above the lunar ground, in meters.

[tex]c[/tex] - Specific heat of aluminium, in joules per degree Celsius-kilogram.

[tex]\Delta T[/tex] - Temperature increase due to collision, in degree Celsius.

If we know that [tex]m = 0.95\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]h = 75\,m[/tex], [tex]c = 920\,\frac{J}{kg\cdot ^{\circ}C}[/tex] and [tex]\Delta T = 0.11\,^{\circ}C[/tex], then the percentage of energy loss due to collision is:

[tex]x = \frac{100\cdot c\cdot \Delta T}{g\cdot h}[/tex]

[tex]x = \frac{100\cdot \left(920\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (0.11\,^{\circ}C)}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (75\,m)}[/tex]

[tex]x = 13.759\,\%[/tex]

13.759 % of the initial mechanical energy is lost as thermal energy.

Explanation:

a) copper

b) olive oil

Hope it helps✌✌

Answer:

v = 2.85 m/s

Explanation:

Given that,

A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.

The distance between wave crests to be 16 m.

We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :

[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]

So, the speed of the wave is 2.85 m/s.

Answer:

why is fraction called a necessary evil

The heat for a temperature in plastic increases at the range of 50°C to 100°C then the plastic decreases its stiffness or flexural modulus.

It is given that the temperature is increased from 50°C to 100°C that means temperature is increasing.

It is required to state the effect of increase in heat on plastic.

The plastic starts to lose its stiffness or we say that it converts into a softened material as long as we increase the temperature of the material.

So if we increase the temperature too much or exceed above the limit of temperature range then it will distort.

Also there are many qualities that can be affected by increasing the temperature like mechanical property, material fatigue or chemical phenomenon.

Therefore, the heat for a temperature range of 50°C to 100°C

Plastic increases then the plastic decreases its stiffness or flexural modulus.

Learn more about the range of temperature here:

https://brainly.com/question/11316625

#SPJ5

Answer:

Momentum of system = 37.2 Kgm/s.

Explanation:

Given the following data;

To find the momentum of the system;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum = mass * velocity

For object A;

Momentum A = 5 * 6

Momentum A = 30 Kgm/s

For object B;

Momentum B = 12 * 0.6

Momentum B = 7.2 Kgm/s

Next, we would determine the momentum of this system using the formula;

Momentum of system = Momentum A + Momentum B

Substituting the values into the formula, we have;

Momentum of system = 30 + 7.2

Momentum of system = 37.2 Kgm/s.

Explanation:

because the moon has less mass than earth, the force due to gravity at the lunar surface is only about 1/6 that on earthso,the weight of a body on earth is 6×5N =30N

Answer:

A although am not seeing the cheetah

Answer:

The effect of gravitation is more in liquid than on solid because inter molecular force of attraction is less in liquid and it is weak than that of solid. ... Whereas in solid the molecule are densely packed together an the inter molecular forces are constantly acting upon one another, this results in higher forces.

Explanation:

The derivative of a constant term is always 0. So the acceleration of the body would be zero. Hence, the acceleration of a body moving with uniform velocity will always be zero.

hope it helps you

This is because of continuous usage, the wire loses its elasticity and dose not regain it original dimension

Answer:

When a spring balance has been used for a long time, the spring in the balance fatigued and there is loss of strength of the spring. In such a case, the extension in the spring is more for a given load and hence the balance gives wrong readings.

Answer:

Efficiency of a machine is 90% this means that the total energy produced to the machine only 90% is useful and given as a output.

Machines are not 100% efficient because some of the work done by a machine is used to overcome friction

Answer:

Work, in physics, measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement. ... To express this concept mathematically, the work W is equal to the force f times the distance d, or W = fd.

Gamma rays

used in radiotherapy

Answer:

16.50 m/s²

Explanation:

initial velocity(u)=45.2 m/s

final velocity(v)= 0 (it stops)

time taken(t)= 2.74 s

now,we have

acceleration(a)= (v-u)/t

= (0-45.2 m/s)/2.74s

= -45.2 m/s / 2.74s

= -16.50 m/s²

Answer:

[tex]\boxed {\boxed {\sf -16.5 \ m/s^2}}[/tex]

Explanation:

We are asked to find the acceleration of a man driving. Acceleration is the change in velocity over the change in time. Acceleration is calculated with the following formula.

[tex]a= \frac{v_f- v_i}{t}[/tex]

The driver's initial velocity is 45.2 meters per second. His final velocity is 0 meters per second because he came to a stop. He stopped in 2.74 seconds.

[tex]\bullet \ v_f= 0 \ m/s \\\bullet \ v_i= 45.2 \ m/s \\\bullet \ t= 2.74 \ s[/tex]

Substitute these values into the formula.

[tex]a= \frac{0 \ m/s - 45.2 \ m/s }{ 2.74 \ s}[/tex]

Solve the numerator by subtracting.

[tex]a= \frac{- 45.2 \ m/s }{ 2.74 \ s}[/tex]

[tex]a= -16.49635036 \ m/s^2[/tex]

The original measurements of velocity and time have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 9 in the hundredth place tells us to round the 4 in the tenths place up to a 5.

[tex]a \approx -16.5 \ m/s^2[/tex]

The acceleration is approximately -16.5 meters per second squared. The acceleration is negative because the man slowed down and came to a stop.

Answer: gravitational pull? gravity

Explanation:

Answer:

A derived unit is a SI unit of measurement comprised of a combination of the seven base units. Like SI unit of force is the derived unit, newton or N where N=s21×m×kg. There are some commonly used derived units which includes: 1. Pressure = AreaForce=m2N.

Explanation:

Answer:

.21

Explanation:

i see everyone got it wrong so ill give you the answer, good luck :)

Answer:

a)  [tex]h=25m[/tex]

b)  [tex]v=19.8m/sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=25m[/tex]

Bounce Height [tex]h'=20m[/tex]

Generally the Kinematic equation is mathematically given by

[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]

[tex]V=22.1m/sec[/tex]

Therefore Height

[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]

[tex]h=25m[/tex]

b)

Generally the Kinematic equation is mathematically given by

[tex]v^2=2ah[/tex]

[tex]v^2=2*9.8*20[/tex]

[tex]v=\sqrt{2*9.8*20}[/tex]

[tex]v=19.8m/sec[/tex]

Answer:

Distance cover in 2  hour = 6 kilometer

Explanation:

Given equation:

x = 2t - 10

where

x = kilometer

t = hour

Find:

Distance cover in 2  hour

Computation:

T = 2

So,

x = 2t - 10

x = 2(2) - 10

x = 4 - 10

x = -6

Distance cover in 2  hour = 6 kilometer

Answer:

The distance is 6 km.

Explanation:

The equation of uniform linear motion of a particle has the form: x = 2t – 10. (x: km, t: h). What is the distance traveled by the particle after 2 hours?

x = 2t - 10

distance traveled after t = 2 hours

Substitute t = 2 in the given expression

x = 2 x 2 - 10

x = 4 - 10

x = - 6 km

So, the distance is 6 km.

It’s 180 m/s^2 dude. I think I have you in my class lol.

The centripetal acceleration of an object is due to the changing velocity in a circular path and the centripetal acceleration of the bicycle is 182.85 m/s².

Centripetal acceleration of an object can be defined as the property of the motion of an object which is traversing a circular path. Any object which is moving in a circular path and has an acceleration vector pointed towards the center of that circular path is known as Centripetal acceleration.

The centripetal acceleration of an object can be calculated by the formula:

ac = v²/ r

where, ac = centripetal acceleration,

v = velocity of the object,

r = radius of the circular path

The centripetal acceleration of the object will be:

ac = (8)²/ r

radius = diameter/ 2

radius = 70/ 2

radius = 35cm or 0.35 m

ac = 64/ 0.35

ac = 182.85 m/s²

Therefore, the centripetal acceleration of the bicycle will be 182.85 m/s².

Learn more about Centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ2

Answer:

It is already balanced

Explanation:

It is already balanced