A young sumo wrestler decided to go on a special high-protein diet to gain weight rapidly. When he started his diet, he weighed 79.5 kilograms. He gained weight at a rate of 5.5 kilograms per month. Let y represent the sumo wrestler's weight (in kilograms) after x months. Which of the following could be the graph of the relationship? graph of an increasing linear function in quadrant 1 with a positive y-intercept (Choice B) B graph of an increasing linear function in quadrants 1 and 4 with a positive x-intercept and negative y-intercept (Choice C) C graph of a decreasing linear function in quadrants 1 and 4 with a positive x-intercept and positive y-intercept (Choice D) D graph of a decreasing linear function in quadrant 4 with a negative y-intercept

Answer:

Step-by-step explanation:

Given the system of equation;

kx - y = 2 ------------------- 1

6x - 2y = 3 -------------------- 2

Rewriting the equations in the format ax+by+c = 0

Equation 1 becomes kx - y - 2 = 0

Equation 2 becomes 6x - 2y - 3 = 0

where a₁ = k, b₁ = -1 and c₁ = -2  and a₂ = 6, b₂ = -2 and c₂ = -3

For the system of equation to have a unique solution the following must be true;

a₁/a₂ ≠ b₁/b₁

Substituting the coefficients into the condition, we will have;

k/6 ≠ -1/-2

k/6 ≠ 1/2

Cross multiplying we will have;

2k ≠ 6

k ≠ 6/2

k ≠ 3

This means that k can be any other real values except 3 for the system of equation to have a unique solution.

Answer:

Step-by-step explanation:

You have the right numbers, but the wrong accounts.

__

Let x represent the amount invested at 8% (the highest rate). Then the total interest is ...

  .08x +.03(3000 -x) = .04(3000)

  .05x = .01(3000) . . . . subtract .03(3000)

  x = 3000/5 = 600

Matthew invested $600 at 8%, $2400 at 3%.

_____

Comment on checking your answer

You may notice that the overall interest rate is 4%, closer to 3% than to 8%. That means more of the money must be invested at 3% than at 8%.

Answer:

AE = 7.5

Step-by-step explanation:

Since <BAC = [tex]90^{0}[/tex], then;

<BAD = <DAE = <CAE = [tex]30^{0}[/tex] (complementary angles)

From ΔABC, applying the Pythagoras theorem to determine the length of side AC;

[tex]/BC/^{2}[/tex] = [tex]/AC/^{2}[/tex] + [tex]/AB/^{2}[/tex]

[tex]/10/^{2}[/tex] = [tex]/AC/^{2}[/tex] + [tex]/5/^{2}[/tex]

100 = [tex]/AC/^{2}[/tex] + 25

[tex]/AC/^{2}[/tex] = 100 - 25

[tex]/AC/^{2}[/tex] = 75

AC = [tex]\sqrt{75}[/tex]

Applying trigonometric function to ΔCAE,

Cos [tex]30^{0}[/tex] = [tex]\frac{AE}{\sqrt{75} }[/tex]

AE = [tex]\sqrt{75}[/tex] × Cos [tex]30^{0}[/tex]

    = 7.5

Therefore, AE = 7.5

10 units squared. Hope this helped.

The area of the triangle is 10 square units.

The given coordinates are A(2,0), B(6,0), and C(8,5).

The formula of area of triangle formula in coordinate geometry is the area of the triangle in the coordinate geometry is:  [tex]A=\frac{1}{2} |x_{1} (y_{2}-y_{3})+x_{2} (y_{3}-y_{1})+x_{3} (y_{1}-y_{2})|[/tex]

Now, Area=1/2|2(0-5)+6(5-0)+8(0-0)|=0.5|20|

=10 square units

Therefore, the area of the triangle is 10 square units.

To learn more about the area of the triangle visit:

https://brainly.com/question/11952845.

#SPJ2

Answer:

1+5.3=6.3

Step-by-step explanation:

not sure what your asking for with the 2

explain what your looking for with the 2 and maybe we can help you further

(I have to do it the way I did it because the 2 in the question is confusing)

Answer:

For expression 1 + 5.32: 6.32

For expression 1 + 5.3 × 2: 11.6

Step-by-step explanation:

If the expression is 1 + 5.32:

If the expression is 1 + 5.3 × 2:

Answer:

x = 34° and y = 62°

Step-by-step explanation:

Complementary angles sum to 90°, therefore 90 = 56 + x which means that x = 34°. The angles formed by an angle bisector are congruent and so are vertical angles; this means that ∠SOR = ∠POU = 56° and ∠POQ = ∠QOR = y. Since POS is a straight line, straight lines have a measure of 180° and because ∠POS = ∠POQ + ∠QOR + ∠SOR, we know that 180 = y + y + 56 → 180 = 2y + 56 → 180 → 2y = 124 → y = 62°.

Answer:

i) [tex]\frac38\pi[/tex]

ii) n = 33

Step-by-step explanation:

For this question you can actually focus on the sine, and forget about the e power. The x-coordinates of the extremes of the curve will be the same as for y=sin(4x)

i) equivalent to solving sin(4x) = -1, so 4x = 3/2 pi, x=3/8 pi

ii) The Tn values are at x = (n·π - π/2)/4

solving  (n·π - π/2)/4 > 25 gives:

n > 1/2 + 100/π, so n > 32.331, but n must be integer, so we get n=33

Answer:

10 9/20

Step-by-step explanation:

Hey there!

If Hillsboro to Campbell is 16 2/20 and Hillsboro to Oxford is 5 13/20,

we’ll do

16 2/20 - 5 13/20

Imrpoper form

322/20 - 113/20

322 - 113

209/20

10 9/20 miles from Oxford to Campbell.

Hope this helps :)

[tex] \LARGE{ \boxed{ \purple{ \rm{Answers;)}}}}[/tex]

☃️ Degree of the polynomial- The highest degree of any term in a polynomial. Here the highest degree is 5.

⇛ 4x⁴ + 5 + 6x⁵ - 2x(° of polynomial = 5)

☃️ Leading coefficient- The coefficient of the term having the highest degree of the polynomial. Here, the highest degree is 5 and the term is 6x⁵

⇛ 4x⁴ + 5 + 6x⁵ - 2x (Leading coeff. = 6)

☃️ Constant term- It is the term having no coefficients, only a fixed real number. This remains constant in any value of polynomial.

⇛ 4x⁴ + 5 + 6x⁵ - 2x (Constant term = 5)

━━━━━━━━━━━━━━━━━━━━

[tex]_6C_3=\dfrac{6!}{3!3!}=\dfrac{4\cdot5\cdot6}{2\cdot3}=20[/tex]

Answer: The value of (f*g)(7) is 66.

Step-by-step explanation:

Given functions: [tex]f(x)= 4x-6\text{ and } g(x)=\sqrt{x+2}[/tex]

Since, product of two functions: [tex](u*v)(x)=u(x)\times v(x)[/tex]

[tex](f*g)(x)=f(x)\times g(x)\\\\=4x-6\times \sqrt{x+2}\\\\\Rightarrow\ (f*g)(x)=(4x-6) \sqrt{x+2}[/tex]

[tex](f*g)(7)=(4(7)-6)\sqrt{7+2}\\\\=(28-6)\sqrt{9}\\\\=22\times 3=66[/tex]

Hence, the value of (f*g)(7) is 66.

Answer:

the answer is 18

Step-by-step explanation:

8 is the answer

Answer:

x=nπ3, n∈I

Step-by-step explanation:

sin x + sin 5x = sin 2x + sin 4x

⇒⇒   2 sin 3x cos 2x = 2 sin 3x cos x

⇒⇒   2 sin 3x(cos 2x - cos x) = 0

⇒    sin 3x=0 ⇒ 3x=nπ ⇒ x=nπ3⇒    sin 3x=0 ⇒ 3x=nπ ⇒ x=nπ3 , n∈I, n∈I

or    cos 2x−cos x=0 ⇒ cos 2x=cos xcos 2x-cos x=0 ⇒ cos 2x=cos x

⇒   2x=2nπ±x  ⇒  x=2nπ, 2nπ3⇒   2x=2nπ±x  ⇒  x=2nπ, 2nπ3 , n∈I, n∈I

But solutions obtained by x=2nπx=2nπ , n∈I, n∈I or x=2nπ3x=2nπ3 , n∈I, n∈I are all involved in x=nπ3x=nπ3 , n∈I

Answer:

B

Step-by-step explanation:

3x = 2y

One way to solve this is to simply plug in values. If we say the following:

x = 2

y = 3

Then, we can start testing.

A: [tex]x/y = 3/2[/tex]

by plugging 2 and 3 in, we see that A doesn't work.

B: x/2 = y/3

This works! First we should look at the other equations.

C: x/3 = y/2

Nope.

D: x/2 = 3/y

This also works, but only with certain numbers. If we were to make x = 4, and y = 6, this wouldn't work.

You could also find out all of this using algebra. so, our anwser is B.

Answer:

  log(1/10) = -1

Step-by-step explanation:

Use the law of exponents and the meaning of logarithm.

  1/10 = 10^-1

  log(10^x) = x

So, you have ...

  log(1/10) = log(10^-1)

  log(1/10) = -1

Answer:

I know the answer

Step-by-step explanation:

If we use 150 the answer would be 6(150) - 200 = 700. The answer is 200.

Brooklyn Burn sold 150 bottles of hot sauce every month, 700 is the profit they make eachmonth.

Complete question :

Anand needs to hire a plumber. He's considering a plumber that charges an initial fee of $65 along with an

hourly rate of $28. The plumber only charges for a whole number of hours. Anand would like to spend no more than $250, and he wonders how many hours of work he can afford.

Let H represent the whole number of hours that the plumber works.

1) Which inequality describes this scenario?

Choose 1 answer:

A. 28 + 65H < 250

B. 28 + 65H > 250

C. 65 + 28H < 250

D. 65 +28H > 250

2) What is the largest whole number of hours that Anand can afford?​

Answer:

65 + 28H < 250

Number of hours Anand can afford = 6 hours

Step-by-step explanation:

Given the following information :

Initial hourly rate = $65

Hourly rate = $28

Number of hours worked (whole number) = H

Maximum budgeted amount to spend = $250

Therefore ;

(Initial charge + total charge in hours) should not be more than $250

$65 + ($28*H) < $250

65 + 28H < 250

Number of hours Anand can afford :

65 + 28H < 250

28H < 250 - 65

28H < 185

H < (185 / 28)

H < 6.61

Sinve H is a whole number, the number of hours he can afford is 6 hours

Answer:

65 + 28H < 250

6
Step-by-step explanation:

tried it, it worked.
the other answer is correct but hard to understand so give them thanks and 4 star :)

Answer:

0.56 is the required probability.

Step-by-step explanation:

Time for which signal shows green light = 4 minutes

Time for which signal shows yellow light = 10 seconds

Time for which signal shows red light = 3 minutes

To find:

Probability that the signal will show green light when you reach the destination = ?

Solution:

First of all, let us convert each time to same unit before doing any calculations.

Time for which signal shows green light = 4 minutes = 4 [tex]\times[/tex] 60 seconds = 240 seconds

Time for which signal shows yellow light = 10 seconds

Time for which signal shows red light = 3 minutes = 3 [tex]\times[/tex] 60 seconds = 180 seconds

Now, let us have a look at the formula for probability of an event E:

[tex]P(E) = \dfrac{\text{Number of favorable cases}}{\text {Total number of cases}}[/tex]

Here, E is the event that green light is shown by the signal.

Number of favorable cases mean the time for which green light is shown and Total number of cases is the total time (Time for which green light is shown + Time for which Yellow light is shown + Time for which red light is shown)

So, the required probability is:

[tex]P(E) = \dfrac{240}{240+10+180}\\\Rightarrow P(E) = \dfrac{240}{430}\\\Rightarrow \bold{P(E) \approx 0.56 }[/tex]

Answer:

x=-2/3 and 1

Step-by-step explanation:

3x^2-x-2=0

(3x+2)(x-1)

3x=-2

x=-2/3

x=1

Answer:

The equation of circle is [tex](x-8)^2+(y-4)^2=5[/tex]

(D) is correct option.

Step-by-step explanation:

Given that,

Points (6,5), (7,2), (9,6) and (10,3) are vertices of an inscribed square.

We need to calculate the distance between (7,2) and (9,6)

Using formula of distance

[tex]d=\sqrt{(x_{2}-x_{1})^2+(y_{2}-y_{1})^2}[/tex]

Put the value into the formula

[tex]d^2=(9-7)^2+(6-2)^2[/tex]

[tex]d^2=20\ m[/tex]

The radius will be

[tex]r^2=\dfrac{20}{4}[/tex]

[tex]r^2=5[/tex]

We need to calculate the center of the point (7,2) and (9,6)

Using formula of center point

For x axis,

[tex]h=\dfrac{x_{2}+x_{1}}{2}[/tex]

Put the value into the formula

[tex]h=\dfrac{9+7}{2}[/tex]

[tex]h=\dfrac{16}{2}[/tex]

[tex]h=8[/tex]

For y axis,

[tex]k=\dfrac{y_{2}+y_{1}}{2}[/tex]

Put the value into the formula

[tex]k=\dfrac{6+2}{2}[/tex]

[tex]k=\dfrac{8}{2}[/tex]

[tex]k=4[/tex]

We need to find the equation for the circle

Using formula of equation of circle

[tex](x-h)^2+(y-k)^2=r^2[/tex]

Put the value into the formula

[tex](x-8)^2+(y-4)^2=5[/tex]

Hence, The equation of circle is [tex](x-8)^2+(y-4)^2=5[/tex]

(D) is correct option.

Answer:

Population Size

Step-by-step explanation:

When sampling with replacement, we can expect that the population size will remain the same. Sampling with replacement occurs when a unit or subject for research is chosen from a population at random. This chosen unit can be returned to the population and another random selection done with the possibility that a unit that was chosen before could be chosen again. So in applying this system of selection, the population size is not taken into consideration. When samples are chosen in this form, it can be referred to as a simple random sample.

So, when determining the sample size necessary for estimating the true population mean, using the sampling with replacement method, the population size is not considered.

Answer:

B. 36 square units

Step-by-step explanation:

This is a triangle and to calculate the area of a triangle we multiply height with base and that divided by two

The height of this triangle is 8 units and the base is 9 units

9 × 8 ÷ 2 = 36 square units

The arc length is

[tex]S=\displaystyle\int_C\mathrm ds[/tex]

where C is the given curve and ds is the line element. C is defined on 0 ≤ t ≤ 3π by the vector function,

[tex]\mathbf r(t)=(t\cos t,t\sin t)[/tex]

so the line element is

[tex]\mathrm ds=\left\|\dfrac{\mathrm d\mathbf r(t)}{\mathrm dt}\right\|\,\mathrm dt[/tex]

[tex]\mathrm ds=\sqrt{\left(\dfrac{\mathrm d(t\cos t)}{\mathrm dt}\right)^2+\left(\dfrac{\mathrm d(t\sin t)}{\mathrm dt}\right)^2}\,\mathrm dt[/tex]

[tex]\mathrm ds=\sqrt{1+t^2}\,\mathrm dt[/tex]

So we have

[tex]S=\displaystyle\int_0^{3\pi}\sqrt{1+t^2}\,\mathrm dt\approx46.132[/tex]

Answer:

1284 m^2

Step-by-step explanation:

Front face and back face:

2 * [28 m * 5 m + (22 m - 5 m) * 6 m] = 484 m^2

Left face and right face:

2 * 22 m * 8 m = 352 m^2

Bottom face and top face:

2 * 28 m * 8 m = 448 m^2

total surface area = 484 m^2 + 352 m^2 + 448 m^2 = 1284 m^2

Answer:

estimated error=±0.725

Step-by-step explanation:

Side of the triangle= 12cm

Opposite of triangle x= 30

h= hypotenose side

Error= =±1

From trigonometry

Sin(x)=opposite/hypotenose

hypotenose=opposite/sin(x)

h=12/sin(x)

h=12Csc(x)

dh=-12Csc(x)Cot(x) dx...............eqn(1)

dx is the possible error in angle measurements

So we need to convert to radius

dx=±1°× (π/180)

=±1°(π/180)

Substitute x and dx into equation (1)

dh= - 12Csc30°Cot30°×[±(π/180)]

= -12(2)(√3)(±(π/180)

==±0.725

Therefore, estimated error=±0.725

Answer:

A. True

Step-by-step explanation:

Stepwise regression is a variable-selection method for independent variables.

Stepwise regression  helps us to recognize and choose the most handy descriptive variables from a list of several reasonable independent variables.

It entails a series of steps that is drafted to locate the most handy X-variable to incorporate in a regression model. During each step of the course of action or method, each X - variable is estimated by applying a set criterion to determine if it is meant to exist in the model.

The basis for selection can be choosing a variable which satisfies the stipulated criterion or removing a variable that least satisfies the criterion. A typical illustration of such criterion is the t value.

Answer:

The cumulative frequency plot is also attached below.

Step-by-step explanation:

The data provided is as follows:

Age Group Frequency

   0 - 9             34.9

  10 - 19             35.7

20 - 29             36.8

30 - 39             38.1

40 - 49             37.8

50 - 59             37.8

60 - 69             34.5

70 - 79             27.2

80 - 89             18.8

90 - 99               7.7

100 - 109       1.7

Consider the Excel output attached.

The cumulative frequency are computed in the Excel sheet.

The cumulative frequency plot is also attached below.

From the cumulative frequency plot it can be seen that in the future most people will belong to a higher age group rather then the lower ones.

Answer:

160 liters of 25%, 20 liters of 40%, 60 liters of 60%

Step-by-step explanation:

x + y + z = 240

0.25x + 0.4y + 0.6z = 0.35*240 = 84

z = 3y

x = 160

y = 20

z = 60

Step-by-step explanation:

a. The mean can be found using the AVERAGE() function.

x = 272.7

b. The standard deviation can be found with the STDEV() function.

s = 39.9

c. The t-score can be found with the T.INV.2T() function.  The confidence level is 0.04, and the degrees of freedom is 26.

t = 2.162

d. Find the lower and upper ends of the confidence interval.

Lower = 272.7 − 2.162 × 39.9 = 186.5

Upper = 272.7 + 2.162 × 39.9 = 358.9

Answer:

15.5846.>

Step-by-step explanation: