Answer:
When the plane is rest position it possess potential energy. But when a aeroplane is flying at the height it possess kinetic energy. No matter what height is given.
UNA MASA DE 0,5 KG ESTA SOBRE UNA PENDIENTE SUJETA MEDIANTE UNA CUERDA QUE IMPIDE UN DESLICE. ¿QUE FUERZA HACE LA CUERDA?
Answer:
Tension force acts along the inclined plane.
Explanation:
A MASS OF 0.5 KG IS ON A SLOPE FASTENED BY A ROPE THAT PREVENTS SLIDING. WHAT FORCE DOES THE ROPE MAKE?
A mass of 0.5 kg is fastened on a slope. So there are the two components of weight.
m g sin A acts along the plane in the downwards direction.
m g cos A acts perpendicular to the plane in upwards direction.
The force which acts of the rope as the mass is fastened is the tension force on the rope.
So, the tension force is there.
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
what mean by expansion effect of heat
Answer:
Explanation:
-Cambio de temperatura
Al calentar un cuerpo la temperatura aumenta
Es el efecto más inmediato del calor, el aumento de la temperatura. Al calentar un cuerpo, es habitual, aunque no siempre, que el cuerpo aumente de temperatura. El aumento dependerá de la cantidad de calor que se suministra, del tipo de sustancia y de su cantidad.
-Dilatación
Cuando un objeto se calienta, su volumen aumenta. Este fenómeno se llama dilatación térmica. Por el contrario, cuando un objeto se enfría, su volumen disminuye, debido a la contracción térmica.
Cuando se calienta un cuerpo, además de cambiar de estado o variar su temperatura, también cambia su tamaño, se dilata.
Por ejemplo, los puentes no se construyen de una única pieza, sino que suelen presentar uno o varios cortes longitudinales, las llamadas juntas de dilatación. Si no existieran esas juntas, los cambios de longitud del puente entre el invierno y el verano o entre el día y la noche acabarían por romperlo.
La dilatación de un cuerpo dependerá del aumento de temperatura que experimente, de su tamaño y de la sustancia de que esté hecho. Cuanto más aumente la temperatura más aumentará su tamaño, lo mismo que cuanto mayor sea, mayor se hará.
Todos los cuerpos, ya sean sólidos, líquidos o gaseosos, varían su tamaño cuando intercambian calor con otro cuerpo.
-Cambios de estado:
Si una sustancia modifica el estado de sólido, líquido o gaseoso, se produce un cambio de estado. Un cambio de estado es una modificación en la forma en que se disponen las partículas que constituyen una sustancia.
El estado en que se encuentre un cuerpo depende de la presión a la que está sometido y de su temperatura. Para cambiar su estado se debe modificar alguna de estas variables, o ambas. Al elevar la temperatura de una sustancia sólida, aumenta la agitación de sus partículas.
Answer:
All forms of matter (solid, liquid and gas) undergo expansion on heating. When a solid is heated, the atoms gain energy and vibrate more vigorously. This results in the expansion of the solid. For a given change in temperature, the extent of expansion is smaller in solids than in liquids and gases. This is due to the rigid nature of solids.
Explanation:
A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm
Answer:
16 cm
Explanation:
Given that,
The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.
Let the x-axis to be the +ve and on the right side and -ve on the left
Thus, displacement would be:
= 0 -3 + 7 -6
= -2 cm
This implies that the object displaces 2cm towards the left.
While the total distance covered by the object equal to,
= 0cm + 3cm + 7cm + 6cm
= 16 cm
Thus, 16 cm is the total distance.
Answer:
Its 2 to the right
Explanation:
edge :p
A small emergency generator supplies 432 000 000 J of electrical energy in twenty-four hours. What is the average power output of the generator?
Answer:
P = 5 kW
Explanation:
Given that,
Electrical energy = 432 000 000 J
Time, t = 24 h = 86400 s
We need to find the power output of the generator. We know that,
Power = work done/time
So,
[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]
or
P = 5 kW
So, the power output of the generator is 5 kW.
To make a position-time graph, you plot position relative to the starting point on the y-axis against the corresponding_______on the x-axis
Answer:
time.
Explanation:
Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.
This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.
A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.
Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, position, displacement, etc.
A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.
A position-time (x-t) graph is a graph of the position of an object against (versus) time.
To make a position-time graph, you should plot the values of the position of an object or body with respect to the starting point on the y-axis against the corresponding time on the x-axis.
Generally, the slope of the line of a position-time (x-t) graph is typically used to determine or calculate the velocity of an object.
An instantaneous velocity can be defined as the rate of change in position of an object in motion for a short-specified interval of time. Thus, an instantaneous velocity is a quantity that can be found by measuring the slope of a line that is tangent to a point on the graph.
In conclusion, the x - t graph also referred to as the position-time graph is used for determining the instantaneous velocity from the slope.
A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be
Answer:
15
Explanation:
displacement = initial position - final position
is the answer correct or wrong
Answer:
wrong answer because m=100
Explanation:
I think it is incorrect
Ah, I tried
Hellllppppppppppppp!!!!!!
forced of friction increases with increase in the weight of vehicles
A student wishes to find the average thickness . she obtain the following measurements
mass of sheet = 60.7g
lenght of sheet = 50.0cm
width of sheet = 30.0 cm
calculate the student's values for
(i) the volume of the sheet
( ii) the average thickness of the sheet
Complete Question:
The density of aluminium is 2.70g/cm³. The thickness of a rectangular sheet of aluminium foil varies, but is much less than 1 mm.
A student wishes to find the average thickness. She obtain the following measurements
Mass of sheet = 60.7g
Length of sheet = 50.0cm
Width of sheet = 30.0 cm
Calculate the student's values for
(i) the volume of the sheet
(ii) the average thickness of the sheet
Answer:
Thickness = 0.015 cm
Explanation:
Given the following data;
Mass of sheet = 60.7gLength of sheet = 50.0cmWidth of sheet = 30.0 cmDensity = 2.70g/cm³I. To find the volume of the sheet;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex] Density = \frac {mass}{volume} [/tex]
Making volume the subject of formula, we have;
[tex] Volume = \frac {mass}{density} [/tex]
Substituting into the formula, we have;
[tex] Volume = \frac {60.7}{2.70} [/tex]
Volume = 22.48 cm³
II. Volume = length * width * height
But, height = thickness
Volume = length * width * thickness
22.48 = 50 * 30 * thickness
22.48 = 1500 * thickness
[tex] Thickness = \frac {22.48}{1500} [/tex]
Thickness = 0.015 cm
Conversion:
1 mm = 0.1 cm
X mm = 0.015 cm
X = 0.015/0.1 = 0.15 mm
Therefore, the thickness of the rectangular sheet of aluminium foil is less than 1 millimetre.
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
When drawing a free-body diagram for an object on an inclined surface, which
way does the normal force point?
A. Straight down
B. Perpendicular to the surface
C. Parallel to the surface
D. Straight up
Explanation:
the answer is B normal force is always perpendicular to the surface
2. Calculate the force needed to accelerate a ball of mass 200 g by 15 m/s?
Answer:
Force = 3 Newton
Explanation:
Given the following data;
Mass = 200 g to kilograms = 200/1000 = 0.2 kg
Acceleration = 15 m/s²
To find the force;
Force = mass * acceleration
Force = 0.2 * 15
Force = 3 Newton
The speed and wavelength of coastal water waves are 4.0 m/s and 6.0 m respectively. When the waves enter a shallower region, the speed decreases to 1.7 m/s. What is the wavelength in the shallower region?
Answer:
v=4m/s
wavelength=6m
f=v/∧
f=0.67Hz
now, v= 1.7 m/s
f=0.67Hz
∧=v/f
∧=1.7/0.67
∧=2.54m
Explanation:
I HOPE THIS WILL HELP
PLEASE MARK AS BRAINLIEST
2.54m is the wavelength in the shallower region.
What is wavelength?Wavelength exists the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in the area or along a wire. In wireless systems, this length exists usually specified in meters (m), centimeters (cm), or millimeters (mm).
Wavelength can be represented as the distance between two successive crests or troughs of a wave. It exists calculated in the direction of the wave.
v=4m/s
wavelength=6m
f=v/λ
f=0.67Hz
now, v= 1.7 m/s
f=0.67Hz
λ=v/f
λ=1.7/0.67
λ=2.54m.
Hence, 2.54m is the wavelength in the shallower region.
To learn more about wavelength refer to:
https://brainly.com/question/27120701
#SPJ2
Which of the following is a mixture?
If the density of a substance is 5g/cm3 and the volume is 10cm3,
determine the mass.
Answer:
(5g/cm³)*(10cm³) = 50g
Explanation:
This is just a conversion formula. Easy to find using dimensional analysis.
(5g/cm³)*(10cm³) = 50g
Answer:
[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]
Explanation:
Density is the amount of mass per unit volume, so the formula is:
[tex]d = \frac{m}{v}[/tex]
The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.
d= 5 g/cm³ v= 10 cm³Substitute the values into the formula.
[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]
We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.
[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]
[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]
The units of cubic centimeters (cm³) cancel.
[tex]10 *5 g = m[/tex]
[tex]50 \ g=m[/tex]
The mass of the substance is 50 grams.
The compound magnesium phosphate has the chemical formula Mg3(PO4)2. In this compound, phosphorous and oxygen act together as one charged particle, which is connected to magnesium, the other charged particle.
The question is incomplete, the complete question is;
The compound magnesium phosphate has the chemical formula Mg3(PO4)2. In this compound, phosphorus and oxygen act together as one charged particle, which is connected to magnesium, the other charged particle. What does the 2 mean in the formula 5Mg3(PO4)2? A. There are two elements in magnesium phosphate. B. There are two molecules of magnesium phosphate. C. There are two magnesium ions in a molecule of magnesium phosphate. D. There are two phosphate ions in a molecule of magnesium phosphate.
Answer:
There are two phosphate ions in a molecule of magnesium phosphate.
Explanation:
The compound magnesium phosphate is an ionic compound. Ionic compounds always consists of two ions, a positive ion and a negative ion.
In this case, the positive ion is Mg^2+ while the negative ion is PO4^3-.
The subscript, 2 after the formula of the phosphate ion means that there are two phosphate ions in each formula unit of magnesium phosphate.
A ball of mass 4kg is lightly dropped into a tub with a base of 1m^2. After it sinks to the bottom, the water rises by 2.5mm. Determine the density of the ball.
a) 40 kg/L
b) 4.4 kg/L
c) 1.6 kg/L
Let h be the height of the water in the tube. Then the total volume of water is
(h m) (1 m²) = h m³
After dropping the ball into the water, the height of the water changes to
h m + 2.25 mm = (h + 0.0025) m
and so the contents of the tub take up (h + 0.0025) m³ of volume.
This means the ball displaces
(h + 0.0025) m³ - h m³ = 0.0025 m³
of water, which is to say that this is volume of the ball.
With a mass of 4 kg, you would find its density to be
(4 kg) / (0.0025 m³) = (4 kg) / (2.5 L) = 1.6 kg/L
please help asap
please
physics !!!///
Write two dimensionless constants and two variables.
Answer:
Explanation:
The dimension less constants are the constants having no dimensions and also have a constant value.
For example, 1, 2, 3... numbers, e (exponent), [tex]\pi[/tex], etc.
The dimension less variables are the variables having no dimensions.
For example, refractive index, angle, strain, etc.
In a long distance race, Michael is running at 3.8 m/s and is 75 m behind Robert, who is running at a constant velocity of 4.2 m/s. If Michael accelerates at 0.15 m/s²:
a) How much time will it take him to catch Robert?
b) How far will Michael have travelled?
Answer:
t = 2.7 seconds
Explanation:
Given that,
Initial speed, u = 3.8 m/s
Final speed, v = 4.2 m/s
Acceleration of Michael, a = 0.15 m/s²
(a) Let t is the time taken by him to catch Robert. It can be calculated as follows :
[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{4.2-3.8}{0.15}\\\\t=2.7\ s[/tex]
So, the time taken is 2.7 seconds.
If a crane worker lifts a crate with a mass of 120 kg from the ground to a
shipping container that is 30 meters off the ground, by how much has the
worker increased the gravitational potential energy of the crate? (Recall that g
= 9.8 m/s2)
A. 46,720 J
B. 35,280 J
C. 29,950 J
D. 18,180 J
SOEM
Answer:
A. 88,200 JExplanation:
Given data,
mass of the crate, m = 200 kgheight of the shipping container, h = 45 mgravitational of a body is possessed by the body due to the virtue of its position.The formula for gravitational potential energy is,
P.E = mgh joules
Substituting the values
P.E = 200 x 9.8 x 45
= 88,200 J
Hence, the gravitational potential energy of the crate is, P.E = 88,200 J
What is a truck's acceleration if the net external force on the truck is 560 N and it has a total of mass of 1000 kg?
Answer:
Acceleration of Truck = 0.56 m/s²
Explanation:
Given information:
Mass of truck = 1,000 kilogram
Net force applied by Truck = 560 N
Find:
Acceleration of Truck
Computation:
Force = Mass x Acceleration
Net force applied by Truck = Mass of truck x Acceleration of Truck
560 = 1,000 x Acceleration of Truck
Acceleration of Truck = 560 / 1,000
Acceleration of Truck = 0.56 m/s²
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
Một con lắc là xo treo thẳng đứng có độ cứng 30 N/m và vật nặng có khối lượng 320 g. Kích thích dễ cho quá nặng dao động điều hoà theo phương thẳng đứng xung quanh vị trí cân bằng với biên độ 6 cm. Lấy g = 10m/s. Độ lớn lực kéo lớn nhất của là xa liễn điểm treo trong quá trình quả nặng dao động là
Answer:
The maximum force is 1.8 N.
Explanation:
A pendulum is a vertically hanging spring with a stiffness of 30 N/m and a mass of 320 g. The excitable excitation oscillates vertically around the equilibrium position with an amplitude of 6 cm. Take g = 10m/s. The magnitude of the maximum pulling force of the distance from the suspension point during the oscillation of the weight is
stiffness, K = 30 n/m
mass, m = 320 g
amplitude, A = 6 cm = 0.06 m
g = 10 m/s^2
Let the maximum acceleration is a.
[tex]a = w^2 A\\\\a = \frac{K}{m}A\\\\Force, F = m a \\\\F = K A\\\\F = 30 \times 0.06 \\\\F = 1.8 N[/tex]
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
the units of work,energy and power are...............units
unit of work is joules
power - watt
energy - joules
Write a difference between force and work?
Answer:
force is a derived quantity
work is a fundamental quantity
2.Force is measured in Newton why work is measured in Newton per seconds (N/s)
Explanation:
no
Cual es el deporte que le da fortaleza y flexibilidad al cuerpo
Answer:
Aesthetic sports
Explanation:
Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.
In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
