So directly the cell density value in a rectangle is:
[tex]5*10^{17} cells/cm^{2}[/tex]
In this exercise, we must first calculate the area of the rectangle, remembering that you need to convert from nm to cm is:
[tex]A=B*H\\A=(0.4*10^{-7})*(0.5*10^{-7})= 2*10^{-15}[/tex]
Next, let's calculate the density from the calculated area:
[tex]\frac{N}{A} = \frac{1000}{2*10^{-15} } = 5*10^{17}[/tex]
In this way, the calculation represents that there is:
[tex]5*10^{17} cells/cm^{2}[/tex]
Learn more: brainly.com/question/18320053
1. You walk along a long straight school corridor for 55
m, then you turn around and walk 30 m in the
opposite. Finally, you turn again and walk 39 m in
the original direction and stop. What is your
displacement from your starting point?
Explanation:
14 m is the displacement and towards the north
What is the mass, in kilograms, of a large dog that weighs 441 newtons?
Answer:
441 Newtons equals 44.97 kilograms.
I need help ASAP pls be right sn know what your doing
Answer: Biology
This is because the first two make no sense and physics is the study of matter and energy. Biology, however, studies the life of plants and animals, which can be used for renewable energy.
A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done
Given,
Force = 10,000 N
Distance = 30 m
Time = 40 s
Work done = force × distance
Work = 10,000 × 30
Work = 300,000 J
______
꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂
The work done on the object is equal to the power it experiences which is equal to 735 watts.
What is work done?Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.
Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.
P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40
Power = 735 watts
The power of the object is 735 watts.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ2
which chamber approves presidential nomination
Answer: The Senate provides advice and consent on presidential nominations.
Name any three things that cause soil pollution
Answer:
garbage , polluted water dam, unexpected dust particle
How much physical activity should an adult have each week?
A.
60 minutes per day, 7 days a week
B.
30 minutes per day, 7 days a week
C.
60 minutes per day, 5 days a week
D.
30 minutes per day, 5 days a week
Please select the best answer from the choices provided.
A
B
C
D
The physical activity should an adult have each week is "60 minutes per day, 5 days a week". The correct answer is option C.
What is WHO?WHO stands for the World Health Organization. It is a specialized agency of the United Nations responsible for international public health. The WHO is headquartered in Geneva, Switzerland, and works in partnership with national governments and other organizations to promote health, keep the world safe, and serve the vulnerable. The organization's primary objective is to ensure that people can enjoy the highest possible level of health, regardless of their race, religion, or socioeconomic status. The WHO's work includes providing leadership on matters critical to health, setting norms and standards, promoting health research and evidence-based practice, and providing technical support to countries.
Here in the Question,
Option A, "60 minutes per day, 7 days a week," and option B, "30 minutes per day, 7 days a week," both suggest that physical activity should be performed every day of the week. While daily physical activity is beneficial for overall health and well-being, the WHO recommendation allows for two days of rest or lighter physical activity per week, which can help prevent injury and allow for recovery.
Option D, "30 minutes per day, 5 days a week," suggests a lower amount of physical activity than the WHO recommendation. While 30 minutes of moderate-intensity aerobic physical activity per day can provide some health benefits, it may not be enough to achieve significant improvements in cardiovascular health, muscular strength, and flexibility.
Therefore, Option C, "60 minutes per day, 5 days a week," is the correct answer as it aligns with the WHO recommendation for adults to engage in at least 150 minutes of moderate-intensity aerobic physical activity per week.
To learn about exercises click:
https://brainly.com/question/13128077
#SPJ5
What electromagnetic wave is used in nuclear research and mineral exploration?.
The electromagnetic wave used in nuclear research and mineral exploration are gamma rays.
Electromagnetic waves refer to those rays that are found in the electromagnetic spectrum. They are collectively called light. Electromagnetic waves are used for different purposes.
Gamma rays are useful in nuclear research especially in identifying decaying radionuclides. Also, gamma rays are used for geologic mapping, mineral exploration, and identification of environmental contamination.
Learn more: https://brainly.com/question/17638582
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
Historia de baloncesto internacional resumen
Answer:
?
Explanation:
If an object is rolling without slipping, how is the speed of its center related to its angular velocity
Speed of its center will be directly proportional to its angular velocity in the case of rolling without slipping
What is rolling without slipping ?
Rolling without slipping is a combination of translation and rotation where the point contact is instantaneously at rest.
When an object rolls without slipping on an inclined plane , then the velocity of the center of mass will be equal to angular velocity times radius that object.
Vo = angular velocity * radius
Learn more about rolling without slipping
https://brainly.com/question/17328374?referrer=searchResults
#SPJ2
4. symbol for the gravitational force ?
Answer: G
Explanation:
A marble is launched at by dropping it through a marble launcher. The marble took 0.22s to land 0.31m from
where it was launched. Find the horizontal velocity of the marble as it rolls off the table.
A. 1.4m/s
B. 0.53m/s
C. 0.71 m/s
D. 0.07m/s
Hi there!
For projectile motion, the horizontal and vertical components are SEPARATE.
We can use the kinematic equation to solve:
dₓ = vₓt
We can rearrange to solve for vₓ:
dₓ/t = vₓ
0.31/0.22 = vₓ
vₓ = 1.4 m/s ⇒ A
A car travelled at a speed of 60 km/hr for thrice as long as it travelled at a speed of 40 km/hr. If the total distance it covered was 440 km, for how long did it travel at a speed of 60 km/hr
Answer:
it traveled 180km
Explanation:
Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?
The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N
The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.
According to Newton's second Law;
Force = (Tension) = mass × acceleration due to gravity
∴
We can say:
Tension = 4kg × 9.81 m/s²
Tension = 39.24 N
Tension = 40 N (to the nearest whole number)
Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N
Learn more about Newton's Law here:
https://brainly.com/question/3715235?referrer=searchResults
Calculate the weight of an object that displaces 3 m2 of water and exerts a pressure of 500 Pa (500 N/m ).
The weight of the object from the information provided in the question is 1500 N.
We know that pressure = Force/area. We have the following information from the question;
Pressure =500 Nm-2
Area = 3 m2
Hence;
Force = Pressure × area
Force = 500 Nm-2 × 3 m2
Force = 1500 N
Hence, the weight of the object is 1500 N
Learn more: https://brainly.com/question/8646601
how to find the latitude and longitude of an address
Answer:
To get the latitude of the address in cell B2, use the formula = GetLatitude (B2) To get the longitude of the address in cell B2, use the formula = GetLongitude (B2) To get both the latitude and longitude of the address in cell B2, use the formula = GetCoordinates (B2)
Explanation:
CAN I GET BRAINLIEST
I agree to hire you for 30 days. You can decide between two methods of payment: either (1) $1000 a day, or (2) one penny on the first day, two pennies on the second day and continue to double your daily pay each day up to day 30. Use quick estimation to make your decision, and justify it
Answer:
The second deal.
Explanation:
I had that before, if u pick the second one you will get twice as much in a year as the first one.
Help help fast please first answer gets brainiest also needs to be clearly stated
A block of mass =4.20 kg slides along a horizontal table with velocity 0=3.50 m/s . At =0 , it hits a spring with spring constant =26.00 N/m and it also begins to experience a friction force. The coefficient of friction is given by =0.250 . How far has the spring compressed by the time the block first momentarily comes to rest? Assume the positive direction is to the right.
The distance in which the spring is compressed is 1.065 m.
The given parameters;
mass of the block, m = 4.2 kgvelocity of the block, v = 3.5 m/sspring constant, k = 26 N/mcoefficient of friction, μ = 0.25Apply the principle of conservation of energy to determine the distance in which the spring is compressed.
[tex]K.E = W + U\\\\\frac{1}{2} mv^2 = \mu Fx \ + \ \frac{1}{2} kx^2\\\\\frac{1}{2}(4.2)(3.5)^2 = 0.25(4.2 \times 9.8)(x) \ + \frac{1}{2} (26)(x^2)\\\\25.725 = 10.29x \ + \ 13x^2\\\\13x^2 + 10.29x - 25.725 = 0\\\\[/tex]
solve the quadratic equation using formula method;
a = 13, b = 10.29, c = -25.725
[tex]x = \frac{-b \ \ +/- \ \sqrt{b^2 - 4ac} }{2a} \\\\x = \frac{-(10.29) \ \ +/- \ \sqrt{(10.29)^2 \ - \ 4(13\times 25.725)} }{2(13)} \\\\x = 1.065 \ m, \ \ or \ -1.86 \ m[/tex]
choose positive distance, x = 1.065 m.
Thus, the distance in which the spring is compressed is 1.065 m.
Learn more here:https://brainly.com/question/18722006
What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod
Answer:
C) 5ML^2
Explanation:
2 Spheres of mass M
Bug's mass 3M
Rod length 2L, radius L
Find Rotational Inertia I
I=Σmr^2
I=(3M+M+M)L^2
I=5ML^2
The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Rotational inertia of the systemThe rotational inertia of the system is determined by summing all the masses together and multiply with the radius.
I(t) = Σmr²
Where;
m is the massr is the radiusI(t) = Inertia of the 2 spheres + inertia of the bug
I(t) = (M + M)L² + (3M)L²
I(t) = 2ML² + 3ML²
I(t) = 5ML²
Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Complete question is below:
There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.
Learn more about rotational inertia here: https://brainly.com/question/14001220
2. What are the challenges of wind energy that causes decrease in the electrical production?
3. Give two solutions:
1. Modification in the structure of the turbine
2. Modification in the function of the turbine.
4. You must estimate the cost in each solution, and which one is more affordable and efficient for the municipality to go for.
5. You must make sure that there is minimal energy loss.
Levelized production cost is a big challenge in the production of wind energy.
The main challenge in the production of wind energy is the high production cost. It has to minimize the Levelized Production Cost (LPC) which is the ratio between energy production cost and economic lifetime. This problem can be solved by doing modification in the structure of the turbine as well as we must ensure minimal energy loss.
The modification in the structure can produce more electrical energy and reduce the energy loss also provides more profit to the company so we can conclude that levelized production cost is a big challenge in the production of wind energy.
Learn more: https://brainly.com/question/25543609
Guys plz i need those answers as soon as possible
9) a) formula = h(ρ)g by default g=9.8m/s²
Pressure = 2×1000×9.8 = 19600Pa
b)
How do energy transformations occur in a hydroelectric plant?
The potential energy of water is converted to mechanical energy by a turbine.
The kinetic energy of water is converted by a dam into potential energy.
The kinetic energy of water is converted by a generator into electric energy.
The potential energy of water is converted by a transformer into electric energy.
Answer:
The answer is #3: The kinetic energy of water is converted by a generator into electric energy.
Explanation:
Hydropower plants capture the energy of falling water to generate electricity. A turbine converts the kinetic energy of falling water into mechanical energy. Then a generator converts the mechanical energy from the turbine into electrical energy.
What happens when you want to move the boat forward? You pull the oars toward yourself.Explain why you do this.
Answer:
You pull on the oars. By the third law, the oars push back on your hands, but that’s irrelevant to the motion of the boat. The other end of each oar (the blade) pushes against the water. By the third law, the water pushes back on the oars, pushing the boat forward.
Can Hotspots can be found at the edges of tectonic plates?
Answer:
No.
Explanation:
Hot spots don't appear at the barriers of tectonic plates, instead, they originate at hot centres known as mantle plumes. Mantle plumes exist below the tectonic plates and may develop a string of volcanoes on the Earths surface.
A car starts from rest and accelerates at 2.5m/s^2 for 2s. What is the final velocity of the car
Answer:
5m/s ez
Explanation:
plz make me brainliest
Leverrier predicted that an invisible planet was pulling the planet Uranus off its predicted course around the sun. Likewise, human beings are pulled off course by the invisible forces of their ____________.
Human beings are pulled off course as a result of the invisible forces of the unconscious.
According to Leverrier, he stated that an invisible planet was pulling the planet Uranus off its predicted course around the sun.
In such a way, human beings are pulled off course by the invisible forces of their unconscious minds. The unconscious minds of people control the thoughts of people.
Read related link on:
https://brainly.com/question/25588203
5 a
What causes the pressure of air at the Earth's surface?
Answer:
Atmospheric pressure is caused by the gravitational attraction of the planet on the atmospheric gases above the surface and is a function of the mass of the planet, the radius of the surface, and the amount and composition of the gases and their vertical distribution in the atmosphere
Explanation:
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me...
Answer:
Additionally, the initial horizontal velocity may be calculated by measuring the diameter d of the ball and dividing the result by the amount of time t required for the ball to pass across the photogate. Vo = d/t is the formula.
Initial vertical velocity is the vertical component of the initial velocity: v 0 y = sin 0 sin 0 = (30.0 m/s) sin 45° = 21.2 m/s
Explanation:
Hope it helps:)
