A tow truck pulls a car 5.00 km along a horizontal roadway using a cable having a tension of 850 N. (a.) How much work does the cable do on the car if it pulls horizontally? If it pulls at 35.0° above the horizontal? (b.) How much work does the cable do on the tow truck in both cases of part (a)? (c.) How much work does gravity do on the car in part (a)?

Answers

Answer 1

I think 1980is the answer because you add???

Answer 2

Identify:

In each case the forces are constant and the displacement is along a straight line, so

[tex]$$W=F s \cos \phi \text {. }$$[/tex]

Set-Up:

In part (a), when the cable pulls horizontally [tex]$\phi=0^{\circ}$[/tex] and when it pulls  [tex]$35.0^{\circ}$[/tex] above the horizontal [tex]$\phi=35.0^{\circ}$[/tex]. In part (b), if the cable pulls horizontally[tex]$\phi=180^{\circ}$[/tex]. If the cable pulls on the car  [tex]$35.0^{\circ}$[/tex] above the horizontal it pulls on the truck at below the horizontal and [tex]$\phi=145.0^{\circ}$[/tex]. For the gravity force [tex]$\phi=90^{\circ}$[/tex], since the force is vertical and the displacement is horizontal.

Execute:

(a) When the cable is horizontal, [tex]$W=(850 \mathrm{~N})\left(5.00 \times 10^{3} \mathrm{~m}\right) \cos 0^{\circ}=4.25 \times 10^{6} \mathrm{~J}$[/tex].

When the cable is[tex]$35.0^{\circ}$[/tex] above the horizontal,[tex]$W=(850 \mathrm{~N})\left(5.00 \times 10^{3} \mathrm{~m}\right) \cos 35.0^{\circ}=3.48 \times 10^{6} \mathrm{~J}$[/tex].

(b)[tex]$\cos 180^{\circ}=-\cos 0^{\circ}$[/tex] and [tex]$\cos 145.0^{\circ}=-\cos 35.0^{\circ}$[/tex],

So the answers are [tex]$-4.26 \times 10^{6} \mathrm{~J}$[/tex] and [tex]$-3.48 \times 10^{6} \mathrm{~J}$[/tex].

(c) Since [tex]$\cos \phi=\cos 90^{\circ}=0, W=0$[/tex] in both cases.

Evaluate: If the car and truck are taken together as the system, the tension in the cable does no net wnetwork

Learn more about  horizontal reffer to

https://brainly.com/question/4138300

#SPJ2


Related Questions

5) You pull a 10.0 kg wagon along a flat road. You exert a force of 80.0 N at an angle of 30.0 degrees above the horizontal while you move the wagon 10.0 m forward. The coefficient of friction between the wagon and road is 0.500. Calculate the work down by you and the work done by friction.

Answers

Consult the attached free body diagram. The only forces doing work on the wagon are the frictional force opposing the wagon's motion and the horizontal component of the applied force.

By Newton's second law, the net vertical force is

• ∑ F [v] = n + (80.0 N) sin(30.0°) - mg = 0

where a is the acceleration of the wagon.

Solve for n (the magnitude of the normal force) :

n = (10.0 kg) g - (80.0 N) sin(30.0°) = 58.0 N

Then

f = 0.500 (58.0 N) = 29.0 N

Meanwhile, the horizontal component of the applied force has magnitude

(80.0 N) cos(30.0°) ≈ 69.3 N

Now calculate the work done by either force.

• friction: -(29.0 N) (10.0 m) = -290. J

• pull: (69.3 N) (10.0 m) = 693 J

The force of earth’s gravity is 10N downward. What us the acceleration of a 15kg backpack if lifted with a a 15N force?

Answers

Answer:

F-F(gr) = ma

a= {F-F(gr)}/m =

=(15-10)/15=0.33 m/s² (upward)

HELP ASAP!!!!! Choose all the answers that apply. Technology A)influences science
B)helps scientists observe fast phenomena
C)is the same as science
D) influences history
E)helps scientists observe slow phenomena​

Answers

A, C, D, but there’s a possible point where b and e could be up there

of the following which is the largest body?
a. the moon
b. Pluto
c. Mercury
d. Ganymede

Answers

Answer:

Ganymede is the largest body

Explanation:

it is the satellite of jupiter

Ganymede is the largest body

A wooden barrel full of water has a flat circular top of radius 25.0 cm with a small hole in it. A tube of height 8.00 m and inner radius 0.582 cm is suspended above the barrel with its lower end inserted snugly in the hole. Water is poured into the upper end of the tube until it is full. The density of water is 1.00 × 103 kg/m3.
What is the force with which the water in the barrel pushes up on the top of the barrel?

Answers

Answer:

that is all i know

Explanation:

radius= 25.0cm

height= 8m

inner radius= 0.582cm

density= 1.00 × 103kgf= m× a

The Greek root astro means "stars." Use the context clues to choose the correct definition of the word astronomer. According to the astronomer, the bigger the telescope, the more detail we can see in the images. O A. a person who studies astronauts O B. a person who studies the stars O C. a person who tells the future O D. a person who studies other people​

Answers

Answer:

b, it's a pretty easy explanation

Calculate the torque produced by a 50.0 N perpendicular force at the end of a 0.300 m long wrench.

Answers

Answer:

Torque = 50N x 0.3m = 15Nm

Explanation:

Torque = Force x length of lever arm. To obtain the torque simply multiply the two given values.

Please write a paragraph explaining the bible verse below in your own words.

Exodus 16:19-20

Answers

Answer:

Moses had told them to not keep the food till morning but some kept some anyways because they probably thought they were going to starve or not have food the next morning but what I think it means is that you have to trust in God that he will provide for you and so when the people kept the food cuz he thought they were probably going to start of the next day it got maggots

2.(01.01 LC)
Which of the following is true for gravitational force? (3 points)
Decreases with increase in mass
Increases with increase in mass
Increases with increase in distance
Decreases with decrease in distance

Answers

Answer:

Increases with increase in mass

Explanation:

gravity is proportional to mass and inversely proportional to the square of the distance between them

F = GMm/d²

Why does the sky appear red and yellow during sunsets.
1. The reds and yellows are caused by the Sun's light having to pass through dust particles near closer to the horizon than when the Sun is higher in the sky.

2. At sunset the prismatic effect of the atmosphere at low angles produces longer red and yellow wavelengths.

3. At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.

4. The red and yellows are appear at sunset because the light must pass through more atmosphere which slows down the wavelength frequency turning it to slower red and yellow frequencies.

Answers

Answer:

The answer should be 3-At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.

Answer:

3. At sunset blue light is scattered by air molecules at higher altitudes. The longer red and yellow wavelengths must travel further through the atmosphere when the Sun is near the horizon. At some point the reds and yellows finally scatter in the lower atmosphere causing the reds and yellows.

What is the effect of erosion?

A. New land forms at the mouth of a river.
B. New land forms at the top of a mountain.
C. A mountain forms.
D. A fossil is created.

Answers

The answer is A new land forms at the mouth of a river


I will mark brainlist

A wave is disturbance that transfers energy and matter.


true
false

Answers

Answer:

False

Explanation:

A wave is a disturbance that transfers energy from one place to another without transferring matter.

Answer:

I'm pretty sure it true sorry if I'm wrong

the push up is dynamic or static​

Answers

Answer:

Dynamic exercises

Explanation:

Una turbina de vapor
recibe vapor con un flujo másico de 30 kg/s a 6205 kPa, 811 K, con una velocidad a la
entrara de 10 m/s. El vapor a la entrada tiene una energía interna específica de 3150.3
kJ/kg y un volumen específico de 0.05789 m3
/kg. El vapor sale de la turbina a 9.859 kPa,
318.8 K. El vapor sale a 200 m/s con una energía interna específica de 2211.8 kJ/kg y
un volumen específico de 13.36 m3
/kg. Encuentre la potencia producida por la turbina
si ésta pierde calor a una tasa de 30 kW.

Answers

Este problema está describiendo una turbina de vapor a la que entra vapor a 30 kg/s, 6.205 kPa y 811 K con una velocidad de 10 m/s y sale a 9.859 kPa, 318.8 K y con una velocidad de 200 m/s. Adicionalmente, tanto el volumen específico como la energía interna son dados para ambas corrientes.

Con lo anterior, resulta posible escribir un balance de energía para esta turbina, despreciando todo efecto por energía potencial ya que no hay diferencia significativa entre la altura de la entrada (1) y la salida (2), pues están practicamente al mismo nivel:

[tex]mh_1+\frac{1}{2} mv^2_1=mh_2+\frac{1}{2} mv^2_2+Q_2+W_2[/tex]

Aquí vemos que la incógnita es [tex]W_2[/tex] como la potencia que produce la turbina. Ahora, el primer cáculo a realizar es el de las entalpías de las corrientes de entrada y salida, dada la energía interna, presión y volumen específico:

[tex]h_1=3150.3\frac{kJ}{kg}+6205kPa*0.05789\frac{m^3}{kg} =3509.51\frac{kJ}{kg}\\\\h_2=2211.8\frac{kJ}{kg}+9.859kPa*13.36\frac{m^3}{kg} =2342.72\frac{kJ}{kg}[/tex]

Ahora, podemos reacomodar el balance de energía con el fin de resolver [tex]W_2[/tex]:

[tex]W_2=m(h_1-h_2)+\frac{1}{2} m(v^2_1-v^2_2)-Q_2[/tex]

Finalmente, reemplazamos los valores para obtener:

[tex]W_2=10\frac{kg}{s} (3509.51-2342.72)\frac{kJ}{kg} +\frac{1}{2} *10\frac{kg}{s} [(10\frac{m}{s}) ^2-(200\frac{m}{s} )^2]*\frac{1kJ}{1000J} -30\frac{kJ}{s}\\\\W_2=11438.4 kJ/s=11438.4kW[/tex]

Es de precisar que la energía cinética como 1/2 m*v² resulta en Joules, por lo que hay que convertir a kilojoules para tener unidades consistentes de kilowatts al final.

Aprende más:

https://brainly.com/question/21902769https://brainly.com/question/24322350

A pumpkin is launched in the air and travels at a horizontal velocity of 25 meters per second for 5 seconds. How far does it travel horizontally?

Answers

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

what is translator disadvantage?​

Answers

Machine translators:

Level of accuracy can be very low.

Accuracy is also very inconsistent across different languages.

Machines can't translate context.

Mistakes are sometimes costly.

Sometimes translation simply doesn't work.

Human translators:

Turnaround time is longer.

Translators rarely work for free.

Unless you use a translation agency, with access to thousands of translators, you're limited to the languages any one translator can work with.

which of the following statements describes a perfectly inelastic collision

Answers

Answer: An ice hockey player picks up a trophy as he slides past it.

Two pool balls colliding precisely inelastically and rebounding off one another is an example. So, the correct option is A.

What is an Inelastic collision?

Inelastic collisions are those in which the total kinetic energy is lower after the impact than it was before. The stick is travelling quickly in the direction of the ball before to the contact. The stick comes to a stop following the accident. It transfers some of its kinetic energy to the cue ball, which rolls forward.

The type of collision mentioned in the given example is known as an inelastic collision is one in which the system's momentum is preserved but its kinetic energy is not. In a ballistic pendulum, an example of an inelastic collision. Dropped ball of clay is another illustration of an inelastic collision.

Thus, the correct option is A.

Learn more about Inelastic collision, here:

https://brainly.com/question/15742157

#SPJ7

Your question is incomplete, most probably the complete question is:

Which of the following statements describes a perfectly inelastic collision?

A. Two billiard balls bounce off of each other,

B. A car crashes into a tree and rebounds in the other direction,

C. A wad of chewing gum is thrown and sticks to a moving truck,

D. Two ice skaters hit each other and fall over in opposite directions,

PLZ HELPPPP!!

this question is about popping microwave popcorn:

If you turn the microwave on for two minutes, is the rate of popping always the same, or does it change? Explain.

Answers

No,the poping of microvave is not same there time is different

 A wooden box with a mass of 10.0 kg rest on a ramp that is incline at an angle of 25° to the horizontal. A rope attached to the box runs parallel to the ramp and then passes over a frictionless bully. A bucket with a mass of M hangs at the end of the rope. The coefficient of static friction between the ramp in the box is 0.50. The coefficient of Connecticut friction between the ramp in the box is 0.35.

Suppose the box remains at rest relative to the ramp. What is the maximum magnitude of the friction force exerted on the box by the ramp?

Answers

The maximum magnitude of the friction force exerted on the box by the ramp is 44.41 N.

The given parameters;

Mass of the box, m = 10 kgInclination of the ramp, θ = 25⁰Coefficient of static friction, μ = 0.5 Coefficient of kinetic friction, μk = 0.35

The normal force on the wooden box is calculated as follows;

[tex]F_n = mg \times cos(\theta)\\\\F_n = 10 \times 9.8 \times cos(25)\\\\F_n = 88.8 2 \ N[/tex]

The maximum magnitude of the friction force exerted on the box by the ramp is calculated as follows;

[tex]F_f = \mu \times F_n\\\\F_f = 0.5 \times 88.82 \\\\F_f = 44.41 \ N[/tex]

Learn more about static frictional forces here: https://brainly.com/question/4515354

There are 270 students and teachers going on a field trip to a science center. If each school bus holds 54 people, how many buses are needed?

Answers

5 buses!
270/54 is five:)

If work stays the same and the distance is increased, then less force is needed to do the work.
True
False

Answers

Not sure what “work” defines but from my understanding I’d go with false.

Answer:

False

Explanation:

This is because the work is the same so the force won't change

Ryder is testing the change in motion for an object that weighs 25 kg and an object that weighs 30 kg. He will push each object with the same force. Ryder predicts the object that weighs 25 kg will have a greater change in motion. Is this correct?

Yes, the object with the smaller mass will have a greater change in motion.
No, the change in motion for both objects will be the same.
Yes, the mass is greater, and the object will have a greater change of motion.
No, neither of the objects will have a change in motion.

Answers

Ryder is testing the change in motion for an object that weighs 25 kg and an object that weighs 30 kg. Then, the greater change in motion is due to the greater mass of the object, and the object will have a greater change of motion. Thus, the correct option is C.


What is Motion?

Motion is the phenomenon in which an object changes its position with respect to the time taken. Motion of an object is mathematically described in terms of the displacement covered by the object, the distance, velocity, acceleration, speed and the frame of reference to an observer and measurement of the change in the position of the body of an object relative to that particular frame with the change in time taken.

The motion of an object is proportional to the mass of the object. The mass is greater in this case, and therefore the objects will have a greater change of motion.

Therefore, the correct option is C.

Learn more about Motion here:

https://brainly.com/question/22810476

#SPJ1

what were your preparetion before going the different physical fitness test?​

Answers

Answer:

Avoid heavy strenuous exercise for the 24 hours prior to testing. Do not exercise at all on the day of testing to ensure you are well rested. Wear appropriate clothing for the conditions (e.g. shorts/track pants and t-shirt/singlet/sports top) and non-slip athletic footwear with laces securely fastened

PLEASE HELP ME GET THIS RIGHT

Answers

Explanation:

I'm not sure, but I would go for the more than A since its orbital speed is at its fastest and the sweep occurs in about the same period of days.

9
are things that you can achieve quickly.
O A.
Dreams
OB.
Long-term goals
O c.
Short-term goals
OD.
Plans

Answers

Answer:

d

Explanation:

A dreams

.......wkkwkwkwkwkwnwnsksk

Answer:

C. short term goal

Explanation:

took a midterm quiz on canvas, Hope this helps <3

What happened when a lobster release a claw? a. The lobster attacks with the claw. b. The lobster let the claw go. C. The lobster bites off the claw. D. The lobster eats with the claw.

Answers

Answer:b

Explanation:

Answer:

The lobster let the claw go. so, B.

Explanation:

i hope this helps.

What are the two factors that affect the frictional force between objects

Answers

Answer: The factors that affect the friction between two surfaces are the weight of the object and the coefficient of friction of the surface.

HIHIHHHHHHHHIHIHIIHIHHHHIHIHIHIHIHIHIHIHIHIHIHIHIHIIH

Answers

Lana rhoades is the best

Answer:

Ok thanks for the points though

Explanation:

Which light is most sensitive to the eyes?

Answers

Answer:

Our eyes are most sensitive to the wavelengths corresponding to the yellow and green colors of the spectrum. Flashy signs and some fire engines are painted in a yellowish-green color to attract our attention.


I will mark brainlist

If a wave’s amplitude is 2cm, then its height is equal to:



5 cm.



0 cm



4 cm.



2 cm

Answers

Answer:

4 cm

Explanation:

Amplitude is the measure from the MIDLINE to the peak of the wave....so the wave HEIGHT is twice the ampltude

2 x 2 cm = 4 cm

Other Questions
unwanted emails sent to a large number of people, as a way ofadvertising. Al2(SO3)3a. Count the number of Sulfur atomb. How many total atoms are given in the compoundPlease helppp 4 t-shirts and a hat costs 31. 00 2 t-shirts and a hat costs 17. 0. How much does a t-shirt cost? how much does a hat cost?. Select the correct text in the passage.Which three phrases describe a wireframe?Tracy uses a (pictorial summary of an entire website) in her team meeting. It is a (two-dimensional illustration) of how (each web page on a website will look.) Known as a workflow diagram, this (explains how pages in a website connect to one another.) It is a (design tool), and it (shows the overall framework of a website.) It is a (visual representation of how much space each element on a page should take.) The impeachment process is a check on the president by what branch of government?a. Judicialb. Executivec. Legislatived. Supreme Courtole in shaping Evaluate. (2a1/3)b/15 when a=4/5 and b=2.25 Enter your answer as a simplified mixed number in the box. if a- b= 2 and ab= 15 then a3-b3?a) 30 b) 98 c) 20 d) 60full explanation please I will mark brainlistA wave is disturbance that transfers energy and matter. true false Which ordered pairs in the form (x, y) are solutions to the equation 3x4y=21? select each correct answer. (1, 6) (7, 0) (11, 3) (3, 3). Write a recursive function called DigitCount() that takes a positive integer as a parameter and returns the number of digits in the integer. Hint: The number of digits increases by 1 whenever the input number is divided by 10. Ex: If the input is: what were your preparetion before going the different physical fitness test? Which of the following characters can NEVER be an adaptation? There are 22 tables in the cafeteria. Each table can seat 8 students.There are 4 lunch periods each day.How many students can the cafeteria seat each day? what word describes when tiny droplets of one liquid are finely dispersed within another liquid? how did the European contact with the Americas impact the native populations Examples of variable costs include all the following except: A. the plant manager's salary. B. direct labor costs. C. electricity used in running production machinery. D. raw materials costs. Convert 1.36x10 to standard form separating coarse particles in the ingredients by passing though a sieve Help help help help help English English HELP ASAP!!!!! Choose all the answers that apply. Technology A)influences science B)helps scientists observe fast phenomena C)is the same as scienceD) influences history E)helps scientists observe slow phenomena