A system failure has occurred. Which of the following restoration processes would result in the fastest restoration of all data to its most current state?Restore the full backup and the last incremental backupRestore the full backup and all differential backupsRestore the full backup and the last differential backupRestore the full backup and all incremental backups

In this scenario, it is more appropriate to set up a wireless guest network for the customers to use.

As the bookstore chain is planning to make the environment more inviting for customers to linger, adding a coffee shop to some of the stores, it is likely that customers will want to use their laptops, tablets or smartphones to access the internet. A wireless network would allow customers to connect to the internet using their own devices, without the need for additional hardware or cables.

In addition, setting up a wireless guest network would provide greater flexibility for the store locations, as customers can connect from anywhere within the store, rather than being limited to a specific location with a wired connection.

Note that the security is a critical consideration for any wireless guest network. It is important to ensure that the guest network is completely separate from the main business network, with appropriate access controls in place to prevent unauthorized access to business resources.

Read more about network here:

https://brainly.com/question/1027666

#SPJ1

See full question below

You've been hired as an IT consultant by a company that runs a moderately sized bookstore chain in a tri-state area. The owners want to upgrade their information systems at all six store locations to improve inventory tracking between stores. They also want to add some new IT-related services for employees and customers. The owners are doing additional, moderate building renovations to increase the space available for seating areas as well as adding a small coffee shop to four of the stores. They want to make the environment more inviting for customers to linger while improving the overall customer experience.

Your first target for improvements is to upgrade the networking infrastructure at each store, and you need to make some decisions about how to design the guest network portion for customers to use.to begin, will the guest network be wired or wireless?

Answer:

Design a for loop that gets 6 integer numbers from a user, accumulates the total of them, then displays the accumulated total to the user. Just write the code segment to show what is asked, not a complete program. however, declare any variables that you need to use. Use a semicolon (;) at the end of each line of code so I can tell when you use a new line in your code.

In bash shell script, please.

Explanation:

Here is an example of how to write a bash shell script that uses a for loop to get 6 integer numbers from the user, accumulate their total, and display the accumulated total to the user:

#!/bin/bash

# declare a variable to store the total

total=0

# use a for loop to get 6 integer numbers from the user

for (( i=1; i<=6; i++ ))

do

   echo "Enter integer number $i:"

   read num

   # add the number to the total

   total=$(( total + num ))

done

# display the accumulated total to the user

echo "The total of the 6 numbers is: $total"

This script initializes the variable total to 0, and then uses a for loop to get 6 integer numbers from the user. Each number is added to the total variable using the += operator. Finally, the script displays the accumulated total to the user using the echo command.

Indeed, the hexadecimal digits 0xB105F00D and 0xAAA8400A represent base-16 values and are often used in computer programming.The value of 0xB105F00D is2,869,542,925.supposed

Hexadecimal integers with the values 0xB105F00D and 0xAAA8400A, which are often used in computer programming, stand in for base-16 values. When translated to decimal form, 0xB105F00D equals supposed 2,869,542,925 and 0xAAA8400A equals 2,817,977,354. It is challenging to ascertain what these numbers stand for or what the primary keyword could be without more details about the context in which they are being utilised. Hexadecimal numbers are used in computers for a variety of things, such as memory locations, constant numbers, and encryption keys, among others. They may represent a broadvalues.supposed

Learn more about supposed here:

https://brainly.com/question/959138

#SPJ4

To create a File object and prompt the user to enter a file name until one that does not throw a FileNotFoundException is entered, you can use the following code:

import java.io.File;

import java.util.Scanner;

import java.io.FileNotFoundException;

class Main {

 public static void main(String[] args) throws FileNotFoundException {

   createFile();

   Scanner input = new Scanner(System.in);

   while (true) {

     System.out.print("Enter a file name: ");

     String fileName = input.next();

     File file = new File(fileName);

     String url = file.getAbsolutePath();

     boolean exist = file.exists();

     if (exist) {

       System.out.println("File found in " + url);

       break;

     } else {

       System.out.

       println("File not found, please enter a valid file name.");}}}

 public static void createFile() {

   File File1 = new File("anyname");

   try {

     File1.createNewFile();

   } catch (Exception e) {

     e.getStackTrace();}}}

This method will continually prompt the user for a file name until a valid one is entered, and then it will return the File object.

For more information on  File object see: brainly.com/question/19706610

#SPJ11

The correct option is to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies.

Given int totalPennies, int numDimes, int numNickels, and int numPennies.

We have to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies. The number of pennies in the totalPennies variable will be divided by 10, and the quotient will be the number of dimes. The number of pennies in the totalPennies variable will be divided by 5, and the quotient will be the number of nickels. The number of pennies in the totalPennies variable will be subtracted from the totalPennies variable after multiplying the dimes and nickels by their respective value in pennies, and the result will be the number of pennies.

int totalPennies; int numDimes; int numNickels; int numPennies; cin >> totalPennies; numDimes = totalPennies / 10; numNickels = (totalPennies % 10) / 5; numPennies = (totalPennies % 10) % 5; cout << "Dimes: " << numDimes << endl; cout << "Nickels: " << numNickels << endl; cout << "Pennies: " << numPennies << endl;

Therefore, the code to perform the required operation is:

int totalPennies;int numDimes;int numNickels;int numPennies;cin >> totalPennies;numDimes = totalPennies / 10;numNickels = (totalPennies % 10) / 5;numPennies = (totalPennies % 10) % 5;cout << "Dimes: " << numDimes << endl;cout << "Nickels: " << numNickels << endl;cout << "Pennies: " << numPennies << endl;

Learn more about Conversion factor here:

https://brainly.com/question/97386

#SPJ11

C++ Code:

c

// Author: Your Name

// Date: March 15, 2023

// Purpose: To print "Hello, World!" in C++

#include <iostream>

int main() {

   std::cout << "Hello, World!" << std::endl;

   return 0;

}

Java Code:

typescript

Copy code

// Author: Your Name

// Date: March 15, 2023

// Purpose: To print "Hello, World!" in Java

public class HelloWorld {

   public static void main(String[] args) {

       System.out.println("Hello, World!");

   }

Benefits and drawbacks of using C++ and Visual Studio in a coding project:

Benefits:

Drawbacks:

C++ can be more difficult to learn and write compared to other programming languages due to its complexity.

Manual memory management can lead to memory leaks and other errors.

C++ code can be less portable between different platforms.

Benefits and drawbacks of using Java and Eclipse or Python and PyCharm in a coding project:

Java:

Benefits:

Drawbacks:

Python:

Benefits:

Drawbacks:

Advantages of being able to code in multiple coding languages and compilers:

Read more about Python here:

https://brainly.com/question/26497128

#SPJ1

The TCP function that controls the amount of unacknowledged outstanding data segments is D) flow control.

Flow control is a critical function in data communication to prevent data loss and overload in the network. TCP flow control regulates the rate of data transmission, ensuring that the receiving device can manage the data transmission effectively. The following are some of the features of TCP flow control:

Learn more about Flow control visit:

https://brainly.com/question/13267163

#SPJ11

It lowers the network's administrative overhead. However, it is not recommended for large networks KW.

What is DHCPv6?

DHCPv6 refers to Dynamic Host Configuration Protocol for IPv6 (Internet Protocol version 6), which is used to assign IPv6 addresses to network devices automatically. When it comes to IPv6, DHCPv6 is a good replacement for IPv4 since it includes functionality for granting IPv6 addresses, IPv6 prefix delegation, and other options. DHCPv6 provides several advantages over IPv6, including flexibility, adaptability, and automated host configuration.

How to diagnose the problem?

Stateless DHCPv6 operation implementation for the firm has failed. IPv6 addresses are being configured by clients as expected. However, clients are not obtaining DNS server address and domain name data from the DHCP pool. The GigabitEthernet interface is turned on, the DNS server address is on the same network as the clients, and clients can talk to the DHCPv6 server.The issue is caused by the router being configured for SLAAC (Stateless Address Autoconfiguration) operation. Stateful DHCPv6 operation, in which the DHCPv6 server provides addresses and options to the client, is required for DNS and domain name data to be assigned to the clients. DHCPv6 server is assigned the role of providing the DNS server address and domain name information to the clients.

What is Stateless Address Autoconfiguration?

Stateless Address Autoconfiguration (SLAAC) is a protocol in which the router sends the prefix to the host, and the host creates its address using that prefix. The host will generate an EUI-64 (Extended Unique Identifier 64) that will be used as the interface ID. SLAAC eliminates the need for DHCPv6 (Dynamic Host Configuration Protocol version 6) servers by enabling hosts to generate their own IP addresses.

Learn more about GigabitEthernet

brainly.com/question/3816001

#SPJ11

When Ron turns on his computer, he hears one beep. However, there is no image on the screen. The monitor indicator is not on. The first thing Ron should consider when he troubleshoots this video issue is to check the connections to the monitor to make sure they are secure.

Here are the troubleshooting steps Ron can follow:

Step 1: Check the connections of the monitor to ensure they are securely connected.

Step 2: Check the monitor's power source.

Step 3: Check the video cable to make sure it's working.

Step 4: Ensure the video card is seated correctly in its slot.

Step 5: Restart the computer and check whether the problem has been resolved.

If not, it may be a hardware problem. In this case, Ron should contact a technician for assistance.

Learn more about SQL here:

brainly.com/question/24540334

#SPJ11

Answer:

B

Explanation:

I just recently learned a bunch of coding and programming skills but don't remember if this is the correct answer or not...

I used Khan Academy.

"Methodologies for implementing controls change"is a key difference in controls when changing from a manual system to a computer system. The correct answer is B.

When changing from a manual system to a computer system, the key difference in controls is the methodology for implementing those controls. In a manual system, controls may be implemented through procedures, forms, and physical security measures. In a computer system, controls may involve access controls, authentication, encryption, backups, and audit trails, which are implemented using software and hardware controls.

While the internal control objectives and principles remain the same, the specific controls needed to achieve those objectives and principles may differ when transitioning to a computer system. Additionally, control objectives may become more challenging to achieve due to the increased complexity and potential for errors in computer systems.

The correct answer is B.

You can learn more about computer system at

https://brainly.com/question/22946942

#SPJ11

When presenting text or pictures copied from someone else's Web page, you should be sure to credit the source by including a citation.

What is a citation?

A citation is a reference to a source that a researcher has used in an academic paper or written work. A citation is a brief reference that allows the reader to locate the source of information. Citation of sources is a critical component of academic writing since it allows the reader to distinguish between your work and the work of others.

Citation is important because it allows you to:

The different styles of citation include the APA (American Psychological Association) style, the MLA (Modern Language Association) style, the Chicago Manual of Style, and the Turabian style. The citation styles are determined by the type of writing being done and the discipline in which the research is being conducted.

Learn more about  citation:https://brainly.com/question/8130130

#SPJ11

HTTPS is a standard security technology used to establish a secure, encrypted connection between a web server and a web browser.

To know more about SSL certificates:https://brainly.com/question/8985851

#SPJ11

The code to complete the following method for checking whether a string is a palindrome is isPalindrome(s, low + 1, high - 1).

Let's understand what is a palindrome! A palindrome is a sequence of characters that is spelled the same way backward and forward. For instance, "racecar" is a palindrome, but "race car" is not. Palindromes can be phrases or sentences as well as single words. Using recursion, the given code checks whether a string is a palindrome or not. The first function is called from the second function. The second function is named isPalindrome and takes three arguments: a string s, a low integer, and a high integer. A boolean value is returned by this function. A recursive call to the same method is made to check whether the input string is a palindrome. The base case is if high is less than or equal to low. If it is true, the method returns true. If not, then the string is checked, and if it is equal, the method calls itself again for the next set of characters. So, the code to complete the given method is 'isPalindrome(s, low + 1, high - 1)'. The method 'isPalindrome(String s, int low, int high)' should be completed by the given code.

Learn more about palindrome visit:

https://brainly.com/question/24304125

#SPJ11

The two examples of owned media from the list are the company blog and website.

Technically, SEO is not earned media. You may improve the performance of your media by using SEO. But, with your optimization efforts, you can "earn" organic traffic. As a result, even if the content is owned media, organic traffic is a type of earned media.

The three types of media, commonly known as news media, social media, and digital media, can also be referred to by the phrases earned media, shared media, and owned media.

To know more about website visit:-

https://brainly.com/question/19459381

#SPJ1

The operating system services that do not debugging errors.

An operating system is a collection of services that an operating system provides to users and programs that run on a computer. An operating system service is a collection of system functions that are made available to programs via system calls.

The operating system provides several services to its users, including the following: User interface .Process management. File management. Device management. Memory management. Security. Error detection and handling. Network and communications. Network and communications. Input and output. Services that are not included in the group of answer choices are debugging errors.

Debugging is a process in which bugs, glitches, or faults are detected and fixed in software applications, computer systems, or microprocessor-based electronic devices.

Learn more about  debugging errors:https://brainly.com/question/28159811

#SPJ11

The given statement "a composite data flow on one level can be split into component data flows at the next level, but no new data can be added and all data in the composite must be accounted for in one or more subflows." is genreally true because when decomposing a composite data flow into component data flows at a lower level, it is important to ensure that all the data in the composite data flow is accounted for in the subflows.

This means that no new data can be introduced, and all the data present in the composite data flow must be split into the subflows. The subflows should collectively represent the same information that was originally conveyed by the composite data flow. This approach helps in breaking down complex systems into manageable parts and enables efficient communication of information across different levels.

You can learn more about composite data flow at

https://brainly.com/question/15049112

#SPJ11

Answer:

1.It tends to settle in the rumen of the stomach

2.Quickly passes through the forestomachs of the ruminants

please like me

On StatKey, under two quantitative variables, identify the cases, the explanatory variables, and the response variable for the cars (highway mpg vs city mpg). Indicate whether each variable is categorical or quantitative.

The response variable is the dependent variable in a regression model, whereas the explanatory variable is the independent variable. The two variables being compared in a regression analysis are the response variable and the explanatory variable.In this example, we are comparing the highway mpg and city mpg of cars, therefore:Cases: CarsExplanatory Variable: City MPGResponse Variable: Highway MPGBoth City MPG and Highway MPG are quantitative variables. Variables will save the memory.

Learn more about variables: https://brainly.com/question/28248724

#SPJ11

The "SMB/CIFS" profile for Windows is the one to choose if you want to share data with Unix-based machines as quickly as possible. A network protocol called SMB (Server Message Block) is used.

You need to make a new DNS record specifically for the new cluster. So that network users can access the cluster by name, you need map the cluster name to the IP address.

Snap two or more open programmes or windows together to form a snap group when working on a particular task.

To know more about Windows visit:-

https://brainly.com/question/13502522

#SPJ1

The SMB (Server Message Block) profile is the best choice for quickly sharing files with Unix-based computers.

To create a share, you want to use a profile using the new share wizard. To share files with Unix-based computers in the quickest way, use the Unix (NFS) profile.

Here is how to do it:

1. In the 'Create a Share' window, select the "Unix (NFS)" option.

2. You can also pick NFSv4, but NFSv3 is the default.

3. Click the Next button. Select the server path where the files are kept or click the Browse button to look for a directory.

4. Click the Next button, and type the share name, description, and the users or groups you want to give access to.

5. You can choose Read or Read/Write access for each user or group.

6. Click the Next button, check the configuration details, and then click the Finish button.

The share will be created now. You can access the share on any Unix-based system by entering the server's name or IP address and the share name in a file browser.

To learn more about Unix from here:

brainly.com/question/13044551

#SPJ11

The amount of bytes allocated in memory when the following line of code is executed is 72 bytes.

The circle[] myCircleList is an array of circles. The brackets [] represent the array of circles. An array is a sequence of memory spaces of similar types. It can be viewed as a group of boxes that share the same size and shape.In this case, circle[] myCircleList is an array of circles that occupy 64 bytes each. A reference variable occupies 8 bytes in memory.

Therefore, the array needs 64 * n bytes in memory (where n is the number of circles in the array), and the reference variable needs 8 bytes in memory. Hence, the total memory allocation would be the sum of the bytes required by the array and the reference variable.

Therefore, 8 bytes are used for the reference variable and 64 bytes are used for each circle object in the array. Since there are no circles yet in the array, the total memory allocation for the array and the circle object would be 8 bytes (for the reference variable).

In general, the total number of bytes allocated in memory when a line of code is executed can be determined by calculating the sum of the size of all objects created by the code, including any required overhead or padding, and any space required for any dynamic memory allocation.

Learn more about line of code here:

https://brainly.com/question/20212221

#SPJ11

The following are the steps to diagnose and correct the problems after replacing the power supply in the computer: Step 1: The first thing you should do is turn on the computer to see what happens.

Step 2: If the computer turns on but doesn't boot into the operating system, you should enter the BIOS to verify that all components are correctly recognized. This can typically be done by pressing the F2 or Delete key when the computer starts up.

Step 3: If all components are not correctly recognized, check that all power connectors are properly attached to the motherboard and components.

Step 4: Check that the hard drives are correctly connected and properly detected in the BIOS. If the hard drives are not detected, make sure that they are properly connected to the motherboard and power supply.

Step 5: Check that the memory is correctly detected in the BIOS. If the memory is not detected, make sure that the RAM is properly seated in the motherboard.

Step 6: Check that the optical drive is correctly detected in the BIOS. If the optical drive is not detected, make sure that it is properly connected to the motherboard and power supply.

Step 7: If everything is correctly detected in the BIOS, try booting into Windows. If the computer boots into Windows and all drives are shown in Explorer, you have successfully corrected all the problems. If not, further troubleshooting may be required.

To learn more about "operating system", visit:  https://brainly.com/question/30225416

#SPJ11

Answer:

6. 5 Code Practice

Instructions

You should see the following code in your programming environment:

import simplegui

def draw_handler(canvas):

# your code goes here

frame = simplegui. Create_frame('Testing', 600, 600)

frame. Set_canvas_background("Black")

frame. Set_draw_handler(draw_handler)

frame. Start()

Using the house program we started in Lesson 6. 5 as a foundation, modify the code to add to the house drawing. Make additions to your house such as windows, doors, and a roof to personalize it

Explanation:

def draw_handler(canvas):

# draw the house

canvas.draw_polygon([(100, 300), (100, 200), (200, 150), (300, 200), (300, 300)], 2, "White", "Brown")

# draw the windows

canvas.draw_polygon([(130, 250), (130, 220), (160, 220), (160, 250)], 2, "White", "White")

canvas.draw_polygon([(240, 250), (240, 220), (270, 220), (270, 250)], 2, "White", "White")

# draw the door

canvas.draw_polygon([(175, 300), (175, 240), (225, 240), (225, 300)], 2, "White", "Red")

# draw the roof

canvas.draw_polygon([(100, 200), (200, 150), (300, 200)], 2, "White", "Gray")

frame = simplegui.create_frame('Testing', 600, 600)

frame.set_canvas_background("Black")

frame.set_draw_handler(draw_handler)

frame.start()

Here's an example Python program that processes a set of integers entered by the user and determines if each integer is positive/negative and divisible by 2 or not, using functions:

def check_positive_negative(number, positive_sum, positive_count, negative_sum, negative_count):

   if number > 0:

       positive_sum += number

       positive_count += 1

   elif number < 0:

       negative_sum += number

       negative_count += 1

   return positive_sum, positive_count, negative_sum, negative_count

def check_divisible_by_2(number, divby2_count, not_divby2_count):

   if number % 2 == 0:

       divby2_count += 1

   else:

       not_divby2_count += 1

   return divby2_count, not_divby2_count

def main():

   positive_sum = 0

   positive_count = 0

   negative_sum = 0

   negative_count = 0

   divby2_count = 0

   not_divby2_count = 0

   while True:

       number = int(input("Enter an integer: "))

       positive_sum, positive_count, negative_sum, negative_count = check_positive_negative(

           number, positive_sum, positive_count, negative_sum, negative_count)

       divby2_count, not_divby2_count = check_divisible_by_2(number, divby2_count, not_divby2_count)

       if number == 0:

           break

  print("Positive count:", positive_count)

   print("Positive sum:", positive_sum)

   print("Negative count:", negative_count)

   print("Negative sum:", negative_sum)

   print("Divisible by 2 count:", divby2_count)

   print("Not divisible by 2 count:", not_divby2_count)

if __name__ == "__main__":

   main()

The check_positive_negative() function takes the current integer, and the sum and count of positive and negative integers seen so far, and returns updated values of the positive and negative sums and counts based on whether the current integer is positive or negative.

The check_divisible_by_2() function takes the current integer and the count of numbers seen so far that are divisible by 2 or not, and returns updated counts of numbers divisible by 2 and not divisible by 2.

The main() function initializes the counters for positive and negative integers and for numbers divisible by 2 or not, and then loops indefinitely, prompting the user for integers until a 0 is entered. For each integer entered, it calls the check_positive_negative() and check_divisible_by_2() functions to update the counters appropriately. Once a 0 is entered, it prints out the final counts and sums for positive and negative integers, and for numbers divisible by 2 or not.

Read more about python programs here:

https://brainly.com/question/26497128

#SPJ1

To see if there is at least one matching row in the Orders table for each customer, use the EXISTS operator. For any matching row, the subquery inside the EXISTS operator returns a single result (1), which is enough to meet the requirement.

Yes, here is a Task 5 sample query that makes use of the EXISTS operator:

sql SELECT Customers, c.CustomerName, and o.OrderID (SELECT 1 FROM Orders) WHERE EXISTS WHERE, o (o.CustomerID = c.CustomerID AND (o.ShipCountry) = "Germany"

All customers who have at least one order with the shipping country of "Germany" will have their name and order ID selected by this query. To see if there is at least one matching row in the Orders table for each customer, use the EXISTS operator. For any matching row, the subquery inside the EXISTS operator returns a single result (1), which is enough to meet the requirement.

Learn more about EXISTS operator here:

https://brainly.com/question/25211092

#SPJ4

The crime of obtaining goods, services, or property through deception or trickery is known as Fraud.

What is Fraud?

Fraud is a legal term that refers to a wide range of criminal offenses, including obtaining money or services by lying, cheating, or stealing. Fraud is frequently committed using financial transactions, particularly credit cards and other financial accounts. Fraud can also be committed in a variety of other settings, including real estate and insurance.In order to constitute fraud, certain elements must be present. First and foremost, there must be an intent to deceive or mislead someone else.

Additionally, there must be some sort of misrepresentation, such as a false statement or a misleading fact, and the victim must have relied on that misrepresentation in some way. Finally, the victim must have suffered some sort of loss or harm as a result of the fraud.

Learn more about  Fraud:https://brainly.com/question/23294592

#SPJ11

Excel's text formatting style is applied to the selected cell or cells when you underline cell content. To highlight or call attention to certain content inside a cell, underline it.

A cell is a rectangular box used to store data in a spreadsheet or table. It is the fundamental component of a spreadsheet and is used to arrange, work with, and examine data. The unique column letter and row number assigned to each cell in a spreadsheet can be used to refer to that cell in formulas and calculations. To make cells more aesthetically pleasing or to draw attention to certain data, multiple colour schemes, font styles, border designs, and alignment options can be applied. They may also include text, numbers, calculations, photos, charts, and other sorts of data.

Learn more about A cell here:

https://brainly.com/question/1675645

#SPJ4

Cross-sectional and longitudinal design elements are combined in cross-sequential designs. They are also referred to as accelerated, mixed, and sequential longitudinal designs.

The reason longitudinal designs are multivariate is because they actually test four variables overall, even if they only examine the bare minimum of two variables to check for correlation.

In longitudinal studies, a sort of correlational research, researchers watch and gather information on numerous factors without attempting to change them. There are a range of different types of longitudinal studies: cohort studies, panel studies, record linkage studies.

To know more about longitudinal design visit:-

brainly.com/question/29740624

#SPJ1

In this code, the while loop condition checks if the value of the value variable is not equal to 'q'. If the condition is true, the loop body executes, which outputs the character and then reads the next character from input using cin >> value.

Here's an example of how the while loop can be executed until the character 'q' is read:

#include <iostream>

using namespace std;

int main() {

   char value;

   cin >> value;

   while (value != 'q') {

       cout << "Character is " << value << endl;

       cin >> value;

   }

   cout << "Done" << endl;

   return 0;

}

This process repeats until the condition becomes false (i.e., the 'q' character is read). Once the loop exits, the program outputs "Done" to indicate that the loop has finished executing.

Learn more about while loop visit:

https://brainly.com/question/30494342

#SPJ11

The effect of the following command chage -m 60 -w 10 jsmith is: It sets the password for user jsmith to expire after 60 days and gives a warning 10 days before expiration.

The chage command in Linux is used to change the user's password expiry information. The -m option sets the minimum number of days required between password changes, and the -w option sets the number of days in advance a user will be warned before their password expires. In this case, the command chage -m 60 -w 10 jsmith sets the minimum password age to 60 days and the warning period to 10 days for the user jsmith. This means that jsmith will not be allowed to change their password before 60 days have passed since the last password change, and will receive a warning 10 days before the password expires.

Learn more about password visit:

https://brainly.com/question/28114889

#SPJ11