Answer:
Hazards Identification
Explanation:
A safety data sheet, SDS, is an informational document provided by the manufacturer or importer of a hazardous chemical detailing the chemical, physical, health, and environmental health hazards associated with the chemical as well as safety precautions in handling the chemical.
Some of the sections in the SDS include:
Product Information: It identifies the chemical as well as its recommended uses. The contact information of the manufacturer is also provided.
Fire fighting methods: It gives measures and guidelines necessary for fighting a fire caused by the chemical.
Physical and chemical properties: states the physical and chemical properties of the chemical substance such as: appearance, odor, pH, melting/freezing point, boiling point and boiling range, flammability, etc.
Hazards identification: states the hazards of the chemical and the necessary warnings regarding the hazards. Some of the information provided include: hazard classification of the chemical (for example flammable liquid, oxidizing gases,explosives, etc), signal word, hazard statement (for example radioactive), pictograms, precautionary statements, etc.
From the above information provided, the student should refer to the hazards identification section.
What is 9.871 x 10^-3 in standard form? *
Answer:
0.009871
Explanation:
[tex] 9.871\times 10^{-3} = 0.009871[/tex]
Answer:
.009871
Explanation:
What element is depicted by the following electron configuration:
(The electron configuration is in the image)
A. None of these
B. Oxygen
C. Chlorine
D. Sulfur
Explanation:
Your required answer is sulpher.
Hope it helps...
how much energy has your body used, in joules, if your health device indicates that 450 calories were burned during your workout
Answer:
Total energy consumed = 1,882.8 joules
Explanation:
Given:
Calories burned = 450 calories
Find:
Total energy consumed
Computation:
1 calorie = 4.184 joules
So,
450 calories = 4.184 × 450
450 calories = 1,882.8 joules
Total energy consumed = 1,882.8 joules
Apollo 17 astronauts eugene cernan and harrison schmitt collected the last samples of moon rocks to bring back to earth in 1972 The astronauts took measurements of the moon rocks using three categories not affected by gravity this is because the earth and moon have different forces of gravity which measurement did they not use?
A-Volume
B-Weight
C-Mass
D-Density
Answer:
The correct answer is B
Explanation:
This question seeks to test the difference between mass and weight.
Mass is a measurement of the amount of matter present in an object. While weight is a measurement of the force of gravity pulling (the mass of) an object. Hence, measuring the weight of the moon rocks in the moon might be a waste since the weight of the object on earth will produce a different value due to the difference in the force of gravity between the earth and the moon.
Answer:
b
Explanation:
What is the atomic number of copper
Answer:
29
Explanation:
Copper is a chemical element with the symbol Cu and atomic number is 29
Explanation:
clearly distinguish between science and technology
Answer:
The words science and technology can and often are used interchangeably. But the goal of science is the pursuit of knowledge for its own sake while the goal of technology is to create products that solve problems and improve human life. Simply put, technology is the practical application of science.
Explanation:
Check the following images
Hope it helps!!!
Please mark it as Brainliest ( the crown icon)
Identify the difference between natural and artificial dyes.
Answer:
Natural dyes, although pure from chemicals, are often times more expensive than chemical dyes.
Answer: natural dyes is dye that it is anything that grow on earth that haven't been possessed and artificial dye mean that it is good for something in your body or something else
Explanation:i search it up
Which of the following statements is true? A. Isotopes of the same element have the same number of protons and neutrons. B. Isotopes have the same physical properties as the normal atom but different chemical properties. C. Isotopes have the same chemical properties as the normal atom but different physical properties. D. If an isotope of one element has the same atomic mass as another element, they will have the same properties.
Answer:
B
Explanation:
Isotopes have the same number of protons but different number of neutrons.
The true statement is,
Isotopes have the same chemical properties as the normal atom but different physical properties.So, option C is correct one.
What is isotopes?The elements have same number of proton but different number of neutrons.Example: hydrogen, deuterium, tritiumWhy isotopes of same elements have different physical properties?The isotopes have different physical properties like freezing point , mass, melting or boiling point etc because they have different mass number .
learn about isotopes,
https://brainly.com/question/11904263
#SPJ2
how many nitrogen atoms are in 18.8 g of barium nitride
18.8gBa(NO3)2 》》》》gN 》》》》 2.016gN
Use the periodic table to determine which element the following spin diagram
represents:
(Using the image)
A. nitrogen
B. Oxygen
C. None of these
D. Boron
Answer:
B. Oxygen
Explanation:
Basically count each arrow since each arrow represents an electron. Then use the periodic table to find the element with 8 electrons, which is oxygen. Also, if you know the orbital patterns, you can identify that the 2p orbital represents an element in Group 16.
Question number 4..
Answer:
I think it's 7089 because that's my answer to your questions
If each geometric shape represents a different type of atom, and atoms that are touching have chemically bonded with each other, which best describes this model? * 1. An element 2. A compound 3. A homogeneous mixture of two compounds 4. A heterogeneous mixture of two compounds 5. A homogeneous mixture of four elements 6. A heterogeneous mixture of four elements
Answer:
The correct option is;
3. A homogeneous mixture of two compounds
Explanation:
An homogeneous mixture is one where the components of the mixture are evenly dispersed such that the individual components cannot be seen to be isolated and distinguishable and having a constant composition of the constituents
The image displays three atoms (red circle, cyan triangle, and orange rectangle). The red circle appear to be bonded in pairs while the cyan triangles are bonded to the orange rectangles making a total of two compounds
The arrangement of the compounds in the mixture appear to be very evenly distributed to suggest an homogeneous mixture
The visibility of the compounds should be for an illustrative purpose.
How many significant figures
are in this number?
107.051
Answer:
there are 6 significant figures in 107.051
Answer:
There Are 6 Significant Numbers
Explanation: But some problems stop at the . so it could 3 if im right but go with 6!
What group is calcium and sodium in?
Answer:
Calcium: Alkaline Earth
Sodium: Alkali Metal
Hope it helps!
Answer:
Calcium is in Alkaline Earth
Sodium is in Alkali Metal
Why does science need to.change its view on ideas overtime?
Explanation:
A scientific idea is an explanation for how something works, or the truth about some aspect of the world, that was figured out using the scientific process. ... Scientific ideas change over time as the evidence improves. The more experiments they do , and the more data they collect, the better the scientific ideas become.
What is the name of this compound? H single bonded to N with a pair of electron dots above and a single bond to H below, single bonded to the right to C with H above and below, and another C with H above, below, and right.
Answer:
Ethanamine (also known as ethylamine)
Explanation:
The compound that is requested by the question is ethanamine. Its trivial name is ethylamine.
It is a compound that contained the ethyl moiety (CH3CH2-) as well as the amine moiety (-NH2).
Ethanamine has a structure that can easily be determined by the statements in the question.
The structure of ethanamine is shown in the image attached.
Answer:
What is the name of this compound?
H H
│ │
H ── N ── C ── C ── H
│ │ │
H H H
❌ A) ethanal
✔️B) ethylamine❌ C) ethanoic acid
❌ D) methyl ethanoate
I Took Question Test And Have Day.
What are half reaction
Answer:
When you don't have a complete reaction.
Explanation:
Happens a lot between a solvent and a solute. The solute may not bind well with the solvent I.e. water.
which of the following is a scientific question about the cuttlefish?
Answer:
How does the cuddle fish change its colors?
Please tell me if I'm wrong.
What happens when a chlorine atom gains an electron in its outer energy shell? A. It has an increase in the number of protons B. It becomes a negative ion C. It becomes a positive ion D. It has a decrease in the number of neutrons
Answer:
When a chlorine atom gains an electron, its outermost principal energy level achieves an octet. In this case, the ion has the same outermost shell as the original atom, but now that shell has eight electrons in it. Once again, the octet rule has been satisfied.
Explanation:
how many carbon atoms are in .650 gram tablet of aspirin (C9H8O4)?
Answer:
For example, in a molecule of aspirin, C9H8O4, there are 9 carbon atoms, 8 hydrogen atoms and 4 oxygen atoms. compound.
Explanation:
The carbon atoms are in 0.650 gram tablet of aspirin (C9H8O4) is 3.24 x 10² atoms.
What are atoms?Atoms are defined as the smallest unit of matter that can be divided without releasing electrically charged particles.
After the Big Bang, the building blocks of matter were generated is known as atoms.
Molar mass of aspirin = 180.2 g
Number of carbon atoms
= 0.650 g x 1 mole aspirin / 180.2 g x 9 / 1 mole aspirin
= 3.24 x 10² atoms
Thus, the carbon atoms are in 0.650 gram tablet of aspirin (C9H8O4) is 3.24 x 10² atoms.
To learn more about atoms, refer to the link below:
https://brainly.com/question/1566330
#SPJ5
Define freezing....... Correct and detailed answers will be marked as Brainliest.
The transformation of liquid into solid when it reaches when it's temperature is below freezing point.
Answer:
Freezing:
When liquid is converted to solid, the process is called freezing.
Conditions for freezing:
1) Temperature must be lowered.
2) The temperature should be below 0 degree centigrade.
Example:
The conversion of "liquid water" into "ice".
=> We can use a "freezer" to freeze things.
1. The Tyndall Effect is most useful for distinguishing between: *
a solute and a solvent
O a suspension and a solution
a colloid and a suspension
a colloid and a solution
Answer:
a colloid and a solution
Explanation:
When solute particles completely dissolve in a solvent, a true solution is formed. The solute particles in this case are so little that they can not be seen with naked eyes. A true solution does not scatter rays of light.
In a false solution, the solute particles are larger than the solute particles in true solutions but are not large enough to be seen with naked eyes. False solutions scatter rays of light. False solutions are also called colloids.
The major difference between a solution and a colloid is that colloids scatter light rays (Tyndall effect) while a true solution does not scatter light rays.
• Calculate relative formula masses from formulae and
from balanced equations?
Answer:
Explanation:
Simple molecules have very small masses. Instead of writing their actual masses in grams or kilograms, we usually use their relative formula masses. These are calculated using the chemical formula and the relative atomic masses of the elements in it.
Relative formula mass
Relative atomic mass has the symbol Ar. The Ar for an element is a measure of the mass of its atoms compared to the mass of carbon-12 atoms. The greater the Ar value, the more mass an element's atoms have. The periodic table shows the Ar value for each element. For example, the Ar for carbon is 12, and the Ar for magnesium is 24. This means that a magnesium atom has twice the mass of a carbon atom.
Calculating relative formula mass
Relative formula mass is given the symbol Mr. To calculate the Mr for a substance:
work out how many atoms of each element there are in the chemical formula
add together the Ar values for all the atoms of each element present
For example, the formula for carbon dioxide is CO2. It consists of one carbon atom (Ar = 12) and two oxygen atoms (Ar = 16):
Mr of CO2 = 12 + 16 + 16 = 44
It could also be calculated this way:
Mr of CO2 = (1 × 12) + (2 × 16) = 12 + 32 = 44
Ar and Mr values are just numbers. They have no units because they are relative masses.
Relative formula masses of ionic compounds
Ionic compounds such as sodium chloride do not exist as molecules. However, their relative formula masses are calculated in the same way. The formulae used are their empirical formulae.
Does the wavelength of light (R.O.Y.G.B.I.V.) affect a plant’s growth?
Answer:
YES
Explanation:
If we put a plant in a room with an orange light source, then it will grow more efficiently than a plant exposed to other colors.
Yes the wavelength of light (R.O.Y.G.B.I.V.) affect a plant’s growth.
What is wavelength of light ?The wavelength of light can be defined as the distance between the two successive troughs of the light wave, and It is denoted by the Greek letter lambda (λ), simply it can be said as the distance between one crest or trough of one wave and the next wave is known as wavelength.
The Visible Light having wave length ranges from 400 nm to 700 nm and the spectrum of visible light has a number of colors having different wavelengths.
For example, The violet color have the shortest form of wavelength whereas the red color have the longest wavelength, wavelength is inversely proportional to the frequency like longer the wavelength of the light have lower is the frequency.
learn more on wavelength of light, here:
https://brainly.com/question/27557868
#SPJ2
which of the following flouride has the highest lattice energy a)NaF b)KF c)CsF d)LiF
Answer:
The correct option is;
d) LiF
Explanation:
The Lattice energy of ionic compounds can be calculated using the modified Coulomb's law as follows;
[tex]U = \dfrac{k' \cdot Q_1\cdot Q_2}{r_0}[/tex]
Where;
Q₁ and Q₂ = The ionic charges
k' = A constant depending on the ionic and valence configuration
r₀ = The distance between the two nucleus
Given the four compounds each of the metallic ions are of the same group (group one) have the same (only one) valence electron, and are combined to the same ion (fluoride ion) such that Q₂, is the same for all compounds, the factor that will influence the lattice energy more will be the r₀
The sizes of the atoms Li, Na, K and Cs increases as arranged as such Li has the least r₀, and therefore LiF the least lattice energy
From chemistry test online, we have;
The lattice energy of LiF = -1045 kJ/mole
The lattice energy of NaF = -924 kJ/mole
The lattice energy of KF = -822 kJ/mole
The lattice energy of CsF = -737 kJ/mole.
what is the scientific term for salt
Answer:
The scientific term for table salt is Sodium chloride.
Explanation:
The answer is sodium chloride.
It is composed of sodium and chloride. Like,
[tex] {na}^{ + } + {cl}^{ + } = nacl[/tex]
so, it's name is sodium chloride.
Can some of you guys give me the Hexane combustion equation?
Answer:
C6H14 + 13/2O2 -------> 6CO2 + 7H2O
Explanations
combustion means burning with excess oxygen
Difference between atomic number and atomic weight any 2 points
Answer:
According to the definitions given, atomic mass which is also called atomic weight is the measured total mass of an element's atom. Whereas, atomic number is nothing but the total number of neutrons and protons in the nucleus of an atom....
can u talk to in comment section
Three determinations were made of the following percentage of oxygen in mercuric oxide. The results were 7.40%, 7.43%, and 7.35%. What was the average percentage?
How many molecules of sodium oxide will be created if 275 grams of sodium reacts with excess oxygen? Given the equation: 4Na + O2 -> 2Na2O
Answer:
3.60 x 10^24 molecules Na2O
Explanation:
