Answer:
B.
Explanation:
Hope this helpssss
<33
A mixture is made of 40 ml of salt water to 200 ml of solution. What percent of the solution is salt water?
Answer:
16.7%
Explanation:
40 ml of salt water + 200 ml of solution = 240 ml
40/240 = 4/24 = 1/6=16.7%
A radioactive sample has a half life of 1 hour. If you start with 1.000 gram of it at noon, how much of it remains at 4pm
The amount of the sample remaining at 4pm is 0.0625 g
We'll begin by calculating the number of half-lives that has elapsed
Half-life (t½) = 1 hour
Time (t) = 4 hour
Number of half-lives (n) =?n = t / t½
n = 4 / 1
n = 4Finally, we shall determine the amount the sample remaining at 4pmNumber of half-lives (n) = 4
Initial amount (N₀) = 1 g
Amount remaining (N) =?[tex]N = \frac{N_0}{ {2}^{n}} \\ \\ N = \frac{1}{ {2}^{4}} \\ \\ N = \frac{1}{16} \\ \\ N = 0.0625 \: g[/tex]
Thus, the amount remaining at 4pm is 0.0625 g
Learn more: https://brainly.com/question/25750315
There are two unknowns in this problem - the mass of potassium carbonates and the mass of sodium carbonate. Let's designate the grams of potassium carbonate as our first unknown (you may want to call it gKcarb, or x, some other variable name that makes sense to you) and the grams of sodium carbonate as our second unknown(you may want to call it gNacarb, or y, some other variable name that makes sense to you). Set up an equation for the sum of your two unknowns. Starting with 'unknown' grams of potassium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the potassium carbonate. Your answer will have a variable for your unknown grams of potassium carbonate in it. Starting with 'unknown' grams of sodium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the sodium carbonate. Your answer will have a variable for your unknown grams of sodium carbonate in it. Set up an equation for what you get if you add these two quantities.
This problem, is describing two scenarios, the first one, a reaction between potassium carbonate and nitric acid, and also this very same acid with sodium carbonate. In addition, it is asked to set up two equations whereby you can get the grams of nitric acid needed to react with the unknown grams of both carbonates.
In this case, we can start off by designating the unknown mass of potassium carbonate as X and that of sodium carbonate as Y, so that we will be able to provide a reliable answer. Next, we write the corresponding chemical equations that take place:
K2CO3 + 2HNO3 --> 2KNO3 + H2O + CO2
Na2CO3 + 2HNO3 --> 2NaNO3 + H2O + CO2
After that, we can set up the conversion by considering the following calcultion track:
g Carbonate --> mol Carbonate --> mol HNO3 --> g HNO3
The conversion from grams to moles involve the carbonates' molar mass and the conversion from moles of nitric acid to grams, its molar mass well. In addition, we need the 1:2 mole ratio of the carbonates to nitric acid that it is evidenced in the reaction.
Therefore, the resulting equations that can be set up are shown as follows:
[tex]X g K_2CO_3 *\frac{1mol K_2CO_3 }{138.2 gK_2CO_3 } \frac{2molHNO_3}{1molK_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3} \\\\Y g Na_2CO_3 *\frac{1mol K_2CO_3 }{105.99 gK_2CO_3 } \frac{2molHNO_3}{1molNa_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3}[/tex]
Learn more:
https://brainly.com/question/22889208https://brainly.com/question/24384921The distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answer:
a.2.55e-7
b.6830
Explanation:
The pH of an acidic solution is 4.83. What is [H"]?
[tex]pH = -\log[H^{+}] \\\\\implies \log[H^{+}] = -pH\\\\\implies [H^{+}] = 10^{-pH}\\\\\implies [H^{+}] = 10^{-4.83} = 0.000015[/tex]
The structure of Disodium edta
Answer:
EDTA disodium salt | C10H14N2Na2O8
Explanation:
How much does a cloud weigh in pounds?
Answer:
1.1 million pounds
Explanation:
Answer:
1.1 million pounds
Explanation:
that's a lot of water above us!!
PLEASE HELPPPPPPPPPPPPPPPP
For the given reactions determine if the entropy increases or decreases.
A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)
B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O
Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.
Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.
In the reaction, 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.
Learn more: https://brainly.com/question/14281129
In this photograph, a soccer player is about to kick the ball. Use the situation to explain that when two objects interact, the force between them can cause energy to be transferred. In your response, identify the type of energy that each object has before they interact, the forces exerted when the objects interact, and the type of energy that each object has after they interact.
The explanation to the question is stated as follows:
Newton's first law of motion states that: a body will continue in its state of rest or uniform motion unless an external force acts on it. So then, the ball initially possesses potential energy because it was at rest. While the leg of the soccer player possesses kinetic energy because its in motion.
Thus, when the player hits the ball, a force known as push has been applied. This would ensure that the ball compels and moves in the direction of the applied force. Therefore after the interaction, the leg of the player now possesses potential energy, since it would come to rest after hitting the ball. While the ball would start moving, now possessing kinetic energy.
Visit: https://brainly.com/question/12099288
A 0.48-mole sample of helium gas occupies a volume of 11.7 L . What is the volume of 0.72 mol of helium gas under the same conditions
AnswerExplanation:I finsished d
Answer:
17.55L
Explanation:
0.48mol : 11.7
0.72mol : x
0.48x = 8.424
x = 17.55
You measure the absorbance of your extracted curcumin solution and realize that the solution is too concentrated. What made you realize this
If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.
Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.
Hence, if the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.
Learn more: https://brainly.com/question/13440572
You have three gases in a mixture where P1= 100 kPa, P2 = 50 kPa, and P3 = 75
kPa. What is the total pressure of the gas mixture?
A. 225 kPa
B. 25 kPa
C. 75 kPa
D. None of the above
Answer:
Ptotal=P1+P2+… +Pn. + P nExplanation:
its c
The table shows the order of the Sun and some of the planets in our solar system.
The letters represent the Earth, Neptune and the Sun, so match them up in your answer.
Explanation:
A=Sun
B=Earth
C=Neptune.
hope my answer will definitely help you out.
Write a balanced chemical equation for this reaction by completing the reaction below. Add the missing products and coefficients. Do not include phases.
To balance a chemical equation you must pay attention that the algebraic equation has the same number of element atoms in reactant and the product.
A chemical equation is a term to refer to the symbolic description of a chemical reaction, that is, the written representation of symbols. For example:
2H₂ + O₂ ---> 2H₂OThe balance of an equation can be related to the law of conservation of matter, that is, the number of atoms of each element in the reactants is in the result.
Note: This question is incomplete, because the information some information is missing.
Learn more in: https://brainly.com/question/12271256
HELP PLEASE I NEED THIS
What is the lowest point of a wave called?
Amplitude
Crest
Frequency
Trough
Answer:
the lowest point of the wave is called Trough
Answer:
Trough is the correct answer
Explanation:
The highest part of the wave is called the crest. The lowest part is called the trough.
What is it called when you have hydrogen peroxide that just eventually turns into water
Answer:
chlorine
Explanation:
Answer:chlorine reacts with hydrogen peroxide
Explanation:
please help asap!!!!!!!
Answer:
c) single bonds, double bonds, carbon atoms and hydrogen atoms
PLEASE HELP!!
ATTACHMENT BELOW
Answer:
read the story
Explanation:
read it and then you will find the answer
After spending some time in the stomach, the food is sent to the blank
Answer:
the small intestine where nutrients are absorbed.
Which choice is an element? Question 2 options: air (N2 mixed with O2 , and CO2 ) sodium chloride (NaCl) oxygen (O2 ) water (H2O )
Answer:
oxygen (O2 )
Explanation:
17.
In the reaction N2 + 3H2 → 2NH3 how many moles of ammonia will be produced from 1.30 mol
of hydrogen and excess nitrogen?
According to the equation given, we have N2 + 3H2 → 2NH3.
Therefore, to determine the moles of NH3 we have to do the following-
1.3 mol H2 × 2 mol NH3 / 3 mol H2 = 0.87 mol
Answer: .87 moles of NH3 are produced from 1.3 moles of H2.
I hope this helps!
. Nhiệt độ ban đầu của 344 g một mẫu sắt là 18,2oC. Nếu mẫu sắt này hấp thụ 2,25 kJ nhiệt lượng thì nhiệt độ cuối của mẫu sắt này là bao nhiêu? (CFe = 0,449 J/g.K).
Answer:
i can't understand the question
If you have an aqueous solution that is 13.5 % Na3PO4 by mass, what is the molality of Na3PO4 in the solution?
Considering the definition of percentage by mass and molality, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].
Percentage by mass
The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
MolalityMolality is the ratio of the number of moles of any dissolved solute to kilograms of solvent.
The Molality of a solution is determined by the expression:
[tex]molality=\frac{number of moles of solute}{kilograms of solvent}[/tex]
This caseConsidering 100 grams as a sample of the solution, then the value of the percentage of concentration given indicates that 13.5 g correspond to Na₃PO₄.
Remember that percent concentration by mass is calculated using the mass of solute and the mass of the solution, which includes both the solute and the solvent. Then:
mass solution= mass solute + mass solvent
100 g= 13.5 g + mass solvent
100 g - 13.5 g= mass solvent
86.5 g= mass solvent
Then, you know:
number of moles of solvent= [tex]13.5 gramsx\frac{1 mole}{163.94 grams} =0.082 moles[/tex] being 163.94 [tex]\frac{grams}{mole}[/tex]the molar mass of Na₃PO₄, this is the amount of mass a substance contains in one mole.mass of solvent= 86.5 grams= 0.0865 kg (being 1000 g= 1 kg)Then, replacing in the definition of molality:
[tex]molality=\frac{0.082 moles}{0.0865 kg}[/tex]
Solving:
molality= 0.948 [tex]\frac{moles}{kg}[/tex]
Finally, the molality of Na₃PO₄ in the solution is 0.948 [tex]\frac{moles}{kg}[/tex].
Learn more about:
mass percentage:brainly.com/question/19168984?referrer=searchResultsbrainly.com/question/18646836?referrer=searchResultshttps://brainly.com/question/20037730?referrer=searchResultshttps://brainly.com/question/25148948molalitybrainly.com/question/20366625?referrer=searchResultsbrainly.com/question/4580605?referrer=searchResultsWhat is the freezing point, in Celsius, of a sucrose-water solution containing 2.23g sucrose per 100g water. The molal freezing point depression constant for water is 1.86oC/m.
The freezing point of the solution is - 0.12 oC.
We know that;
ΔT = K m i
ΔT = Freezing point depression
K = Freezing constant
m = molality
i = Van't Hoff factor
Number of moles of sucrose= 2.23g/342 g/mol = 0.0065 moles
Mass of solvent in Kg = 0.1 Kg
Molality of the solution = 0.0065 moles/ 0.1 Kg = 0.065 m
Now;
ΔT = 1.86 oC/m × 0.065 m × 1
ΔT = 0.12 oC
Freezing point of pure water = 0 oC
Freezing point of solution = 0 oC - 0.12 oC = - 0.12 oC
Learn more: https://brainly.com/question/2292439
For a process Arightwards harpoon over leftwards harpoonB, at 25 °C there is 10% of A at equilibrium while at 75 °C, there is 80% of A at equilibrium. Estimate enthalpy change of this reaction in kJ/mol
This question is describing the following chemical reaction at equilibrium:
[tex]A\rightleftharpoons B[/tex]
And provides the relative amounts of both A and B at 25 °C and 75 °C, this means the equilibrium expressions and equilibrium constants can be written as:
[tex]K_1=\frac{90\%}{10\%}=9\\\\K_2=\frac{20\%}{80\%} =0.25[/tex]
Thus, by recalling the Van't Hoff's equation, we can write:
[tex]ln(K_2/K_1)=-\frac{\Delta H}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]
Hence, we solve for the enthalpy change as follows:
[tex]\Delta H=\frac{-R*ln(K_2/K_1)}{(\frac{1}{T_2} -\frac{1}{T_1} ) }[/tex]
Finally, we plug in the numbers to obtain:
[tex]\Delta H=\frac{-8.314\frac{J}{mol*K} *ln(0.25/9)}{[\frac{1}{(75+273.15)K} -\frac{1}{(25+273.15)K} ] } \\\\\\\Delta H=4,785.1\frac{J}{mol}[/tex]
Learn more:
https://brainly.com/question/10038290https://brainly.com/question/1967138440.0 g of ice cubes at 0.0°C are combined with 150. g of liquid water at 20.0°C in a coffee cup calorimeter. Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)
The final temperature of the mixture in the coffee cup calorimeter is; 19.467 °C
According to the law of energy conservation:
As such; the heat transfer in the liquid water is equal to heat gained by the ice
Heat transfer by liquid water is therefore;
DH = m × c × DTDH = 6.02 kJ/mol) = 150 × 4.18 × (T1 - T2)6020 J/mol = 627 × (20 - T2)However, since 18g of water makes one mole
6020 J/mol = 6020/18 = 334.44 J/g.334.44 = 627 × (20 - T2)0.533 = (20 - T2)T2 = 20 - 0.533T2 = 19.467°C
Read more on heat:
https://brainly.com/question/21406849
How many federal agencies are responsible for managing land resources in the United States?
2
4
ОООО
6
10
The answer would be 4.
The agencies are:
Department of Agriculture's Forest Service (AFS)
Department of the Interior's Bureau of Land Management (BLM)
Fish and Wildlife Service (FWS)
National Park Service (NPS)
These four agencies cover around 95% of the land and are the only federal agencies.
I learned about these agencies in school.
the process of breaking food is to release energy is called _____
Answer:
The process by which food is broken down to release energy is called respiration
I hope it helps.
Answer:
Respiration
Explanation:
hope this helps.
What is a solute?
substance in which another substance dissolves and mixes evenly A
a solution unable to be separated by any means B
a mixture that can easily be separated with simple tools C
the substance that dissolves into another substance D
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ D
Solute is the substance that dissolves into another substance