Answer:
The geometric average return for this stock was 8.64%.
Explanation:
Geometric average return refers to the return which will result in the correct compounded dollars at the end of the time period.
Geometric average return can be computed using the following formula:
Geometric average return = {[(1 + r1)(1 + r2) ... (1 + rn)]^(1/n)} - 1 ......... (1)
Where r is returns from year 1 to year n.
For the stock in the question, we have:
r1 = 9.62%, 0.0962
r2 = -14.65%, or -0.1465
r3 = 19.85%, or 0.1985
r4 = 25.35%, or 0.2535
r5 = 7.65%, or 0.0765
n = 5
Substituting the values into equation (1), we have:
Geometric average return = {[(1 + 0.0962)(1 - 0.1465)(1 + 0.1985)(1 + 0.2535)(1 + 0.0765)]^(1/5)} - 1
Geometric average return = {1.51310732605096^0.20} - 1
Geometric average return = 0.0864, or 8.64%
Therefore, the geometric average return for this stock was 8.64%.
All-Mart Discount Stores Corporation contracts to buy ten acres from Suburban Enterprises, Inc., as a site for a new store. The contract calls for a "warranty deed." According to a survey that All-Mart commissions, one corner of an adjacent, enclosed parking lot is on part of the property that Suburban is attempting to convey. Can All-Mart avoid the contract? If so, on what basis? If not, why not?
Answer:
All-Mart can avoid the contract since it didn't meet their specification for the siting of their new store which they planned for. The warranty deed which they called for was to ensure that, all land purchased has guarantee that it would not become an issue for them in the future.
Since one part is an enclosed parking lot which is a public property that Suburban is trying to sell to them, the best would be to avoid it.
Explanation:
You purchased a share of stock for $120. One year later you received $1.82 as a dividend and sold the share for $136. What was your holding-period return
Answer:
Holding period return =14.85 %
Explanation:
The return on stock is the sum of the dividends earned and capital gains made during the holding period of the investment.
Dividend is the proportion of the profit made by a company which is paid to shareholders.
Capital gains is another type of the return made on an equity investment as a result of increase in the value of the shares. It is difference between the cost of the share and the value at the time of disposal.
Therefore, we can can compute the return on the investment as follows:
Holding period return = (Dividend + capital gain)/Begin Price of stock × 100
Dividend = $1.82
Capital gains= 136 - 120 = 16
Total dollar return on Investment = 1.82 + 16= $ 17.82
= 17.82/120 × 100 = 14.85 %
Holding period return =14.85 %
A sole proprietor owned an office building with a cost of $300,000 and accumulated depreciation of $40,000, using modified accelerated cost recovery system (MACRS) straight-line depreciation. In the current year, she sold the building for $320,000. What is the unrecaptured Section 1250 gain from this sale, if any
Answer:
The Correct Answer:
$40,000
Explanation:
IRC Section 1250 requires that excess depreciation (actual depreciation in excess of straight-line depreciation) be recaptured as ordinary income. Since the property has sold for more than the adjusted basis ($300,000 − $40,000 = $260,000 adjusted basis), the initial gains are recaptured based on the original purchase price of $300,000.
This makes the first $40,000 of the profit subject to the unrecaptured Section 1250 gain while the remaining $20,000 is considered regular long-term capital gains.
Cost recovery. Richardses' Tree Farm, Inc. purchased a new aerial tree trimmer for $. It is classified in the property class category of a single-purpose agricultural and horticultural structure. Then the company sold the tree trimmer after four years of service. If a seven-year life and MACRS, LOADING..., was used for the depreciation schedule, what is the after-tax cash flow from the sale of the trimmer (use a % tax rate) if a. the sales price was $? b. the sales price was $? c. the sales price was $? a. If the sales price is $, what is the after-tax cash flow?
Answer:
after tax cash flow = $29,512.32
Explanation:
the numbers are missing in this question:
purchase cost = $82,000
tax rate = 40%
selling price at end of year 4 = $32,000
MACRS 7 year depreciation schedule:
year % depreciation expense carrying value
1 14.29% $11,717.80 $70,282.20
2 24.29% $19,917.80 $50,364.40
3 17.49% $14,341.80 $36,022.60
4 12.49% $10,241.80 $25,780.80
after tax cash flow = $32,000 - [($32,000 - $25,780.80) x 40%] = $32,000 - $2,487.68 = $29,512.32
Choose the statement that is incorrect.
A. In the long run, a rise in the foreign price level brings dollar appreciation and a rise in the U.S. price level brings dollar depreciation.
B. In the long run, a change in the nominal exchange rate brings an equivalent change in the real exchange rate.
C. In the long run, the nominal exchange rate is a monetary phenomenon.
D. In the long run, the nominal exchange rate is determined by the quantities of money in two countries.
Answer:
B. In the long run, a change in the nominal exchange rate brings an equivalent change in the real exchange rate.
Explanation:
As we know that in the short run there is a decline in the nominal exchange that results in a decrease of real exchange rate due to which there is a reduction of the import and the export is risen.
But in the case of the long run, if there is a change in the nominal exchange rate so the real exchange rate would remain the same
This results that if there is a change in the nominal exchange rate so it would not bring the equal change in the real exchange rate
Hence, option B is incorrect
The Bathtub Division of Kirk Plumbing Corporation has recently approached the Faucet Division with a proposal. The Bathtub Division would like to make a special "ivory" tub with gold-plated fixtures for the company's 50-year anniversary. It would make only 5,000 of these units. It would like the Faucet Division to make the fixtures and provide them to the Bathtub Division at a transfer price of $160. If sold externally, the estimated variable cost per unit would be $140. However, by selling internally, the Faucet Division would save $6 per unit on variable selling expenses. The Faucet Division is currently operating at full capacity. Its standard unit sells for $43 per unit and has variable costs of $25.
Required:
Compute the minimum transfer price that the Faucet Division should be willing to accept, and discuss whether it should accept this offer.
Answer:
Minimum transfer price = $152
Explanation:
The minimum transfer price can be calculated by Adding variable cost and the contribution margin lost
Minimum transfer price = Variable cost + Contribution margin lost
Minimum transfer price = $134 + $18
Minimum transfer price = $152
Working
Variable cost = $140 -$6(saving) = $134
Contribution margin lost = Selling price - variable cost per unit
Contribution margin lost = $43 - $25
Contribution margin lost = $18
Decision: The offer should be accepted because the minimum transfer price of $152 is less than $160
The following information pertains to J Company's outstanding stock for 2021:
Common stock, $1 par
Shares outstanding, 1/1/2021 10,000
2 for 1 stock split, 4/1/2021 10,000
Shares issued, 7/1/2021 5,000
Preferred stock, $100 par, 7% cumulative
Shares outstanding, 1/1/2021 4,000
What is the number of shares J should use to calculate 2018 basic earnings per share?
a. 20,000.
b. 22,500.
c. 25,000 .
d. 27,000.
Answer: b. 22,500
Explanation:
J should use the total number of outstanding common stock at end of year to calculate 2018 basic earnings.
As a result of the Stock-split, the shares are split into 2 for 1.
There were 10,000 shares split so;
= 10,000 * 2
= 20,000
On the 1st of July, 5,000 shares were issued. This means that up till December 2021, the stock was outstanding for 6 months.
This will reflected by;
= 5,000 * 6/12
= 2,500 shares
Total shares = 20,000 + 2,500
= 22,500 shares
In Macroland autonomous consumption equals 100, the marginal propensity to consume equals 0.75, net taxes are fixed at 40, planned investment is fixed at 50, government purchases are fixed at 150, and net exports are fixed at 20. Planned aggregate expenditure equals:________a.1,000. b.1,160. c.1,280. d.1,440.
Answer:
b) $1,160
Explanation:
From the above information,
I=Investment = 50
G=Government expenditure = 150
X=Net export = 20
a=autonomous consumption = 100
b=Marginal propensity to consume = 0.75
Y=Equilibrium GDP
C = consumption ;
C = 100 + 0.75Y (Y income - 40 taxes)
Planned aggregate expenditure (PAE)
PAE = C + l +G +X
Substituting for C in the above equation,
PAE = 100 + 0.75 (Y - 40) + 50 + 150+ 20
= 100 + 0.75Y -30 + 50 + 150 + 20
= 290 + 0.75Y
Since short run exists when Y = PAE
Therefore,
Y = 290 + 0.75Y
Collect like terms
Y - 0.75Y = 290
0.25Y =290
Y = 290/0.25
Y = 1,160
A Missouri job shop has four departments machining (M), dipping in a chemical bath (D), finishing (F), and plating (P) assigned to four work areas. The operations manager, Mary Marrs, has gathered the following data for the movement of material. The number of workpieces moved yearly between work areas are:
M D F P
M - 800 2,000 200
D - - 400 400
F - - - 2,000
P - - - -
It costs $0.75 to move 1 workpiece 1 foot in the job shop. For the layout design of the job shop,
LAYOUT PLAN A:
Distance between work areas (departments) in feet:
M D F P
M - 21 12 8
D - - 5 10
F - - - 4
P - - - -
The yearly total material handling cost of the current layout presented in PLAN A_____________.
Answer: Find the answer in the attached file
Explanation:
Polly Khan is trying to calculate the current market rate given the following information: Investor’s have been requiring a 12% annual return on Builtrite’s stock which has a beta of 2.0 and the current risk-free rate is 4%. What is the current market rate?
Answer:
The current market rate is 8%
Explanation:
The market rate is the return on market or the market portfolio. To calculate the market rate (rM) we will use the CAPM equation which is used to calculate the required rate of return on a stock or portfolio. The formula for required rate of return under CAPM is,
r = rRF + Beta * (rM - rRF)
Where,
rRF is the risk free raterM is the market rateWe already know the value of r, rRF and Beta. We will input these values in the above equation to calculate the market rate.
0.12 = 0.04 + 2 * (rM - 0.04)
0.12 - 0.04 = 2 * rM - 0.08
0.08 + 0.08 = 2 * rM
0.16 / 2 = rM
rM = 0.08 or 8%
2. Using semiannual compounding, what is the value to you of a 9% coupon bond with a par value of $10,000 that matures in 10 years if you require a 7% return
Answer:
The Value of the Bond, PV is $10.962.65
Explanation:
The Value of the Bond (PV) can be determined as follows :
PMT = ($10,000 × 9%) ÷ 2 = $450
P/YR = 2
N = 10
Required Return (YTM) = 7 %
FV = $10,000
PV = ?
Using a Financial Calculator, the Value of the Bond, PV is $10.962.65
Busch Company has these obligations at December 31. For each obligation, indicate whether it should be classified as a current liability, long-term liability, or both. (a) A note payable for $100,000 due in 2 years. select a balance sheet section (b) A 10-year mortgage payable of $200,000 payable in ten $20,000 annual payments. select a balance sheet section (c) Interest payable of $15,000 on the mortgage. select a balance sheet section (d) Accounts payable of $60,000. select a balance sheet section
Answer:
Busch Company
Indication of whether the obligation be classified as a current liability, long-term liability, or both:
(a) A note payable for $100,000 due in 2 years. Long-term Liability
(b) A 10-year mortgage payable of $200,000 payable in ten $20,000 annual payments. Both.
Every year, $20,000 would be classified as Current Liability while the remaining balance is long-term liabilities.
(c) Interest payable of $15,000 on the mortgage. Both
If the interest payable is to be settled at the end of the mortgage, then it is classified as only long-term.
(d) Accounts payable of $60,000. Current Liability
Explanation:
Busch's current liabilities are financial obligations that are due for settlement within the next accounting period of 12 months or less.
The long-term liabilities of Busch Company are those financial obligations that are not due for settlement within the next accounting period.
For some long-term liabilities, Busch may settle some part within 12 months. That part that can be settled within the accounting period are classified as current while the other parts are non-current.
According to the producer price index database maintained by the Bureau of Labor Statistics, the average cost of computer equipment fell 3.8 percent between January and December 2016. Let's see whether these changes are reflected in the income statement of Computer Tycoon Inc. for the year ended December 31, 2016.
2016 2015
Sales Revenue $ 109,000 $ 133,500
Cost of Goods Sold 64,500 75,100
Gross Profit 44,500 58,400
Selling, General, and Administrative Expenses 36,900 38,800
Interest Expense 590 520
Income before Income Tax Expense 7,010 19,080
Income Tax Expense 1,500 5,900
Net Income $ 5,510 $ 13,180
Required:
1. Compute the times interest earned ratios for 2016 and 2015. (Round your answers to 1 decimal place.) Times Interest Earned 2015 2016
2. Does Computer Tycoon generate sufficient net income in both years before taxes and interest) to cover the cost of debt financing?
a. Yes
b. No
Answer:
A.
2015 37.7
2016 12.9
B. Yes
Explanation:
Computation of the times interest earned ratios for 2016 and 2015
First step is to find the EBIT
EBIT: 2016 $ 2015 $
Gross profit 44,500 58,400
Less Selling, General and Administrative expenses (36,900) (38,800)
EBIT 7,600 19,600
Second step is to compute the times interest earned ratios for 2016 and 2015 using this formula
Time interest earned = EBIT / Interest expense
Let plug in the formula
Time interest earned 2016 2015
EBIT $7,600 $19,600
÷Interest expense $590 $520
=Time interest earned 12.9 37.7
Therefore the Time interest earned will be :
2015 37.7
2016 12.9
2. Yes Computer Tycoon generate sufficient net income in both 2015 and 2016 before taxes and interest in order to cover the cost of debt financing.
"ABC corporation is trading in the market for $51. The corporation declares a 25% stock dividend. After the ex date, the holder of 1 ABC Jan 50 Call will have:"
Answer:
1 ABC Jan 50 call
Explanation:
Based on the information given we were told that the Corporation was trading for the amount of $51 with a declare stock dividend of 25 percent, this means that After the ex date which is the day in which the stock will begin to trade without the monetary worth of the following dividend payment , which means that the holder of the 1 ABC Jan 50 call will have still have 1 ABC Jan 50 call.
On January 1, Parson Freight Company issues 9.0%, 10-year bonds with a par value of $3,400,000. The bonds pay interest semiannually. The market rate of interest is 10.0% and the bond selling price was $3,168,967. The bond issuance should be recorded as:
Answer:
January 1
Cash $3168967 Dr
Discount on Bonds Payable $231033
Bonds Payable $3400000 Cr
Explanation:
The issuance of bond on January 1 is at a discount as the coupon rate paid by the bond is less than the market interest rate. In such case the bond is issued at a lower value than its par/face value. The discount on bonds payable is the difference between the face value and the cash received on issuance.
The entry to record the issues include a debit to cash account as cash is received, a debit to the discount on bonds payable account for the amount of discount and a credit to bonds payable account as liability is created as a result of the issuance of the bonds.
Discount = 3400000 - 3168967 = 231033
Child Play Inc. manufactures electronic toys within a relevant range of 20,000 to 150,000 toys per year. Within this range, the following partially completed manufacturing cost schedule has been prepared: Complete the cost schedule. When computing the cost per unit, round to two decimal places.
Toys produced 40,000 80,000 120,000
Total costs:
Total variable costs $720,000 d. $ j. $
Total fixed costs 600,000 e. k.
Total costs $1,320,000 f. $ l. $
Cost per Unit
Variable cost per unit a. $ g. $ m. $
Fixed cost per unit b. h. n.
Total cost per unit c. $ i. $ o. $
Answer:
Toys produced 40,000 80,000 120,000
Total costs:
Total variable costs $720,000 $1,440,000 $2,160,000
Total fixed costs $600,000 $600,000 $600,000
Total costs $1,320,000 $2,040,000 $2,760,000
Cost per Unit
Variable cost $18 $18 $18
Fixed cost $15 $7.50 $5
Total cost $33 $25.50 $23
Fixed costs do not change with total output, they are the same regardless so the number of units produced. Variable costs change proportionally to any change in total output. If total output increases, variable costs will increase.
The Securities and Exchange Commission requires companies listing on the New York Stock Exchange and the Nasdaq Stock Market to have codes of ethics. A code of ethics is
Answer:
A Code of Ethics are a set of guidelines that helps the member in distinguishing right and wrong and always following the guidelines that protects the interest of profession and stakeholders.
Explanation:
Basically these Ethical codes are set of guidelines that helps the entities and professionals to acknowledge what is expected from them and what are their responsibilities. Usually every reputable profession and organizations adopt code of ethics to encourage and enforce ethical practices in decision making process.
Answer:
Answer:
A Code of Ethics are a set of guidelines that helps the member in distinguishing right and wrong and always following the guidelines that protects the interest of profession and stakeholders.
Explanation:
Basically these Ethical codes are set of guidelines that helps the entities and professionals to acknowledge what is expected from them and what are their responsibilities. Usually every reputable profession and organizations adopt code of ethics to encourage and enforce ethical practices in decision making process.
Explanation:
Sue Helms Appliances wants to establish an assembly line to manufacture its new product, the Micro Popcorn Popper. The goal is to produce five poppers per hour. The tasks, task times, and immediate predecessors for producing one Micro Popcorn Popper are as follows:
Task Performance time(minutes) Predecessor
A 8 -
B 10 A
C 8 A,B
D 10 B,C
E 8 C
F 4 D,E
a. The theoretical minimum number of workstations is:___________
b. The assignment of tasks to workstations should be:________
Were you able to assign all the activities to workstations equivalent to the theoretical minimum workstation ?
c. The efficiency of the assembly line is:________
Answer:
Please see explanation below.
Explanation:
a. Cycle time = Production time available per hour / Units required per hour
= 60 / 5
= 12minutes
Minimum number of workstations = Sum of the task time / Cycle time
Sum of task time
= 8 + 10 + 8 + 10 + 8 + 4
= 48
The theoretical minimum number of work stations is
= 48 / 12
= 4
b. In order to assign the tasks to the work station, events that precede the task must be considered together with the time taken to complete each task.
°Task A This task is assigned to work station 1 and no task would further be assigned to work station 1, otherwise it will exceed the cycle time.
°Task B. This next task will be assigned to work station 2, no additional task will be assigned to station 2.
Task C is assigned to workstation 3, hence can no longer accept any other assigned task.
°Task D is the next task and will be assigned to work station 4, and we cannot assign any more task to work station 4.
°Task E and F will not be assigned as there are no more available stations.
Task Time Workstation
A. 8 1
B. 10 2
C. 8 3
D. 10 4
E. 8 -
F. 4 -
Please note that due to the theoretical minimum number of work station, which is 4, it will not be possible to assign task to all the workstations hence task E and F remains unassigned.
C. Efficiency of the assembly line
Efficiency ;
= Sum of task times / Actual number of work stations × cycle time
Although the actual number of required workstation is 5 but we cannot assign task E and F due to the theoretical minimum number of workstation. Therefore, additional work station will be required and there are 5 work stations in total.
= 48 ÷ (5 × 12) × 100
= 80%
The theoretical minimum should be = 4
The efficiency of the assembly line should be 80 percent
The production time = 60
The units that are required per hour = 5
[tex]cycle time = \frac{minutes in one hour}{units needed in a day} \\\\cycle time=\frac{60}{5}[/tex]
= 12
The workstation = 8+10+8+10+8+4
= 48
[tex]The minimum number = \frac{48}{12} \\\\= 4[/tex]
The efficiency of the assembly line
[tex]\frac{48}{5*60} \\\\= 0.8\\\\0.8*100 = \\\\80percent[/tex]
Read more on https://brainly.com/question/15558413?referrer=searchResults
George Bailey purchased equipment from M. Potter for $450,000, paying $35,000 cash as a down payment and financing the remainder. The correct journal entry to record this event is:
Answer:
Equipment $450,000 (debit)
Cash $35,000 (credit)
Suppliers Loan $415,000 (credit)
Explanation:
George Bailey must recognize the Asset of Equipment, de-recognize the Assets of Cash and recognize the Suppliers Loan as above.
A regulated Natural Monopoly is more likely to advertise freely under which of the following types of regulation?
a) price regulation
b) profit regulation
c) output regulation
d) social regulation
Answer:
A
I took the quiz
Explanation:
A customer buys a variable annuity and elects a payout option of Life Income with a 20 year period certain. This means that payments will continue for:
Answer:
the annuitant's life, but if he dies before 20 years elapse, payments continue to his heir(s)
Explanation:
An annuity life payment is a financial option that continues until the annuitant dies. a lump sum payment is made by this annuitant which he uses in securing a payout option of Life Income with a 20 year period certain . This annuity would continues for as long as the customer or annuitant is alive, but if he dies before that certain period, Someone else, that is a beneficiary or heir would be entitled to the payment until that period of 20 years elapses.
When recording journal entries for production costs using a standard cost accounting system, the debit to Work in Process Inventory account is for the ______ amount.
Answer: Actual amount
Explanation:
Standard Costing deviates from traditional accounting in that it is not based on historical costs of a good. In standard cost accounting, the actual costs are put in place of standard costs and then the variance between the two will be recorded and used for analysis.
The debit to the Work in Process Inventory account under a standard cost accounting system will be the actual amount.
Union Local School District has bonds outstanding with a coupon rate of 4.5 percent paid semiannually and 20 years to maturity. The yield to maturity on these bonds is 3.8 percent and the bonds have a par value of $10,000. What is the dollar price of the bond? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
Answer:
$10,974.45
Explanation:
coupon rate 4.5%, semiannual = 2.25%
20 years until maturity = 40 periods
market rate 3.8%, semiannual = 1.9%
par value $10,000
market price of the bonds = PV of par value + PV of coupon payments
PV of par value = $10,000 / (1 + 1.9%)⁴⁰ = $4,710.13
PV of coupon payments = $225 x 27.84144 (PV annuity factor, 1.9%, 40 periods) = $6,264.32
market value = $4,710.13 + $6,264.32 = $10,974.45
Answer:
The dollar price of the bond is $10,974.45.
Explanation:
The dollar price of the bond, PV, can be determined as follows :
N = 20 × 2 = 40
PMT = ($10,000 × 4.5%) ÷ 2 = $225
P/YR = 2
YTM = 3.80 %
FV = $10,000
PV = ?
Using a Financial Calculator, the dollar price of the bond, PV is $10,974.45.
Lott Company uses a job order cost system and applies overhead to production on the basis of direct labor costs. On January 1, 2020, Job 50 was the only job in process. The costs incurred prior to January 1 on this job were as follows: direct materials $21,200, direct labor $12,720, and manufacturing overhead $16,960. As of January 1, Job 49 had been completed at a cost of $95,400 and was part of finished goods inventory. There was a $15,900 balance in the Raw Materials Inventory account.
During the month of January, Lott Company began production on Jobs 51 and 52, and completed Jobs 50 and 51. Jobs 49 and 50 were also sold on account during the month for $129,320 and $167,480, respectively. The following additional events occurred during the month.
1. Purchased additional raw materials of $95,400 on account.
2. Incurred factory labor costs of $74,200. Of this amount $16,960 related to employer payroll taxes.
3. Incurred manufacturing overhead costs as follows:
Indirect materials $18,020
Indirect labor $21,200
Depreciation expense on equipment $12,720
Various other manufacturing overhead costs on account $16,960.
4. Assigned direct materials and direct labor to jobs as follows.
Job No. Direct Materials Direct Labor
50 $10,600 $5,300
51 41,340 26,500
52 31,800 21,200
Calculate the predetermined overhead rate for 2020, assuming Lott Company estimates total manufacturing overhead costs of $ 882,000, direct labor costs of $735,000, and direct labor hours of 21,000 for the year.
Answer:
Predetermined manufacturing overhead rate= $1.2 per direct labor dollar
Explanation:
Giving the following information:
Company estimates total manufacturing overhead costs of $882,000 and, direct labor costs of $735,000
To calculate the predetermined overhead rate, we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 882,000/735,000
Predetermined manufacturing overhead rate= $1.2 per direct labor dollar
An exchange-rate policy in which the government usually allows the exchange rate to be set by the market, but sometimes intervenes is called a __________________ exchange rate system.
Answer: Managed Float
Explanation:
Also called "Dirty Float", the Managed float is an exchange rate system that allows for the currency of a country to be set by the forces of demand and supply in the market.
However, unlike in a clean float, the Central bank will occasionally intervene in the market to influence the how fast the currency is changing value or to control the direction it is going.
This is usually done to protect the domestic economy from sudden shocks in the global economy.
Tyler Company applies manufacturing overhead to production at the rate of $4.9 per direct labor hour and ended August with $12,900 underapplied overhead. Actual manufacturing overhead incurred for August amounted to $110,410.
How many direct labor hours did Tyler Company incur during August?
Answer: 19,900 hours
Explanation:
Direct Labor hours = Applied Manufacturing Overhead/ Applied Overhead rate per hour
Applied Manufacturing Overhead
When the overhead is said to be under-applied, the Applied overhead is less than the Actual Overhead.
To find the Applied overhead therefore;
= Actual Overhead - Under-applied amount
= 110,410 - 12,900
= $97,510
Direct Labor hours = Applied Manufacturing Overhead/ Applied Overhead rate per hour
= 97,510/4.9
= 19,900 hours
Key facts and assumptions concerning Kroger Company, at December 12, 2007, appear below. Using this information, answer the questions following.
Facts and Assumptions
Yield to maturity on long-term government bonds 4.54%
Yield to maturity on company long-term bonds 6.32%
Coupon rate on company long-term bonds 7.50%
Market price of risk, or risk premium 6.30%
Estimated company equity beta 1.05
Stock price per share $ 25.97
Number of shares outstanding 681.2 million
Book value of equity $ 4,965 million
Book value of interest-bearing debt $ 6,674 million
Tax rate 35.0%
a. Estimate Kroger's cost of equity capital.
b. Estimate Kroger's weighted-average cost of capital. Prepare a spreadsheet or table showing the relevant variables.
Answer:
a. 11.16 %
b. 7.56 %
Explanation:
Cost of equity capital is the return that is required by Common Stockholders.
This can be determined as follows :
1. Growth Model
Cost of equity = Recent dividend / Market Price of Share + Expected Growth Rate
or
2. Capital Asset Pricing Model (CAPM)
Cost of equity = Return on Risk Free Security + Beta × Return on Market Portfolio Security
= 4.54% + 1.05 × 6.30%
= 11.16 %
WACC = Ke × (E/V) + Kd × (D/V) +Kp × (P/V)
Explanation and value of Variables
Ke = Cost of Equity
= 11.16 %
E/V = Weight of Equity
= $ 4,965 ÷ ( $ 4,965 + $ 6,674)
= 42.66 %
Kd = Cost of Debt :
= Interest × (1 - tax rate)
= 7.50% × ( 1 - 0.35)
= 4.875 or 4.88 %
D/V = Weight of Debt
= $ 6,674 ÷ ( $ 4,965 + $ 6,674)
= 57.34 %
Therefore,
WACC = 11.16 % × 42.66 % + 4.88 % × 57.34 %
= 7.56 %
MicroTech Corporation maintains a capital structure of 40 percent debt and 60 percent common equity. To finance its capital budget for next year, the firm will sell 11% coupon bonds at par value (assume no flotation costs). The firm will finance the rest of its capital expenditures with retained earnings. MicroTech expects next year's dividend to be $1.30 per share. Dividends are expected to grow at 7% per year for the foreseeable future. The current market value of MicroTech's common stock is $30 per share. If the firm has a corporate tax rate of 21%, what is its weighted cost of capital for next year?
Answer:
weighted cost of capital for next year is 10.27 %.
Explanation:
Weighted cost of capital = Ke × (E/V) + Kd × (D/V)
Ke = Cost of Equity
= Dividend Yield + Expected growth rate
= $1.30 / $30.00 + 0.07
= 0.11333 or 11.33 %
Kd = Cost of Debt
= Interest × (1 - tax rate)
= 11% × ( 1 - 0.21)
= 8.69 %
Weighted cost of capital = 11.33 % × 60% + 8.69 % × 40%
= 10.27 %
Masterson, Inc., has 3.6 million shares of common stock outstanding. The current share price is $85.50, and the book value per share is $9.25. The company also has two bond issues outstanding. The first bond issue has a face value of $73 million, a coupon rate of 5.3 percent, and sells for 95.7 percent of par. The second issue has a face value of $45 million, a coupon rate of 5.9 percent, and sells for 104.9 percent of par. The first issue matures in 23 years, the second in 11 years. The most recent dividend was $4.04 and the dividend growth rate is 4.3 percent. Assume that the overall cost of debt is the weighted average of that implied by the two outstanding debt issues. Both bonds make semiannual payments. The tax rate is 23 percent.
1. What is the company's cost of equity?
2. What is the company's aftertax cost of debt?
3. What is the company's weight of equity?
4. What is the company's weight of debt?
5. What is the company's WACC?
Answer:
1. 9.03 %
2. 7.56 %
3. 72.45 %
4. 27.55 %
5. 8.63 %
Explanation:
Cost of equity is the return that is required by holders of Common Stocks
Cost of equity = Recent year`s dividend / Current Market Price + Expected Growth Rate
= $4.04 / $85.50 + 0.043
= 0.0903 or 9.03 %
1st bond issue
PV = $69,861,000
Pmt = ($73,000,000 × 5.30%) ÷ 2 = - $1,934,500
p/y = 2
n = 23 × 2 = 46
Fv = 0
i = ?
Cost of the 1st Bond Issue, i is : 2.1571 %
After tax cost = 2.1571 % × 77 %
= 1.66%
2nd Bond Issue
PV = $47,205,000
Pmt = ($45,000,000 × 5.90%) ÷ 2 = - $1,327,500
p/y = 2
n = 11 × 2 = 22
Fv = 0
i = ?
Cost of the 2nd Bond Issue, i is : 7,6681 %
After tax cost = 7,6681 % × 77 %
= 5.90%
Total Cost of Debt = 1.66% + 5.90%
= 7.56 %
Market Values :
Market Value of Equity = 3,600,000 shares × $85.50
= $307,800,000
Market Value of Bonds
1st Issues = $69,861,000
2nd Issue = $47,205,000
Total = $117,066,000
Weight of equity = Market Value of Equity ÷ Total Market Value
= $307,800,000 ÷ ($307,800,000 + $117,066,000)
= 72.45 %
Weight of debt = Market Value of Bonds ÷ Total Market Value
= $117,066,000 ÷ ($307,800,000 + $117,066,000)
= 27.55 %
WACC = Weighted Cost of Debt + Weighted Cost of Equity
= 27.55 % × 7.56 % + 72.45 % × 9.03 %
= 8.63 %
Messing Company has their own credit card and makes a credit sale on February 1 to one of its customers for $5,000. Prepare the February 1 journal entry for Messing Company by selecting the account names from the drop-down menus and entering the dollar amounts in the debit or credit columns.
Answer:
February 1
DR Accounts Receivable.......................................$5,000
CR Sales........................................................................................$5,000
(To record sales on credit)
The credit card was that of Messing company itself.
