a step down transformer has 1000 turns on the primary and 10 turns on the secondary. if 120 vac is connected across the primary, the secondary voltage is

Answer:

An induced current in a changing magnetic field will be in  such a direction as to oppose the magnetic field causing the induced current.

Thus, the current in the second loop must be increasing in a counterclockwise direction       (a)

The induced current must produce magnetic field that opposes the field producing the change or perpetual motion could occur.

The distance of center of gravity from tail. now torque balance about center of gravity 1.58m

Let the total weight be w.

Then weight carried by front leg=60% of w

=0.6w

weight carried by back leg

=w-0.6w

=0.4w

Here d is the distance of center of gravity from tail. now torque balance about center of gravity.

The torque or moment is the result of the force and the perpendicular distance from the center of gravity for an open object or from the pivot for a closed item to the pivot. In the same way that a force causes a translation, a torque, which is also a vector variable, causes a rotation.

T1=T2

F1 X L1=F2 X L2

0.40(d-0.5)=0.6w(0.5+1.8-d)

2(d-0.5)=3(2.3 - d)

2d - 1= 6.9-3d

5d=7.9

d=7.9/5=1.58m

For more such question on weight.

https://brainly.com/question/2337612

#SPJ4

It will also form a standing wave at frequency C)) 750 H:z

The frequency of a repeating event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarity. Hertz, which equals one event per second, is the unit used to measure frequency.

The formula for standing wave frequency goes with the order nf (n=1,3,5,7,....) for one end of the string fixed at one point and the other at the open end.

Here in nf, f means the fundamental frequency that is when the order, n =1 . Here given that the fundamental frequency (n=1) as 250 Hz. Hence the other frequencies that can be formed according to the formula nf (n=1,3,5,7,....) are 750 Hz (n=3) , 1250 Hz (n=5), 1750 Hz (n=7) .. and so on.

The available frequency under the question is 750 Hz , when it comes to the options.

Learn more about frequency on:

https://brainly.com/question/26146342

#SPJ1

The option that explains this observation is option E:

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (or E-field). It can also refer to a system of charged particles' physical field.

Negatively charged electrons will be diverted in the direction of the positive electrode, or (+) plate. Positively charged protons will be diverted in the direction of the negative electrode, or (-) plate.

Therefore, Magnetic lines of force in space are bent by ferromagnetic materials in a static magnetic field. The distortion impact on the static magnetic field is disturbed by the material flaws.

Learn more about electric field from

https://brainly.com/question/14372859

#SPJ1

See full question below

Current Current is moving through a copper ribbon in the direction shown. The ribbon is suspended between the poles of a magnet as indicated. When the voltage is measured between A and B, it is observed that A is at higher potential than B. Which of the following explains this observation?

A The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point A.

B The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point B.

с Electrons moving through the magnetic field experience a magnetic force to the left that deflects electrons in the ribbon toward point A.

D Electrons moving through the magnetic field experience a magnetic force to the right that deflects electrons in the ribbon toward point B.

E The electric field in the ribbon is distorted by the magnetic field. This distortion creates an electric field component directed from point A to point B that deflects electrons in the ribbon toward point B.

The acceleration of the rock would be constant as well as the velocity of the rock as it falls.

We know that the motion of the rock would be in accordance to the principles of the motion of an object under gravity. If we drop the rock, we have to know that the rock would be acted upon by a system of forces. The system of the forces that act on the rock would determine the magnitude of the acceleration of the rock.

The forces that act on the rock as it is falling are as follows;

1) Weight of the rock

2) Drag force

We know that these two forces do actually act in the opposite direction to each other as the rock is falling. The velocity of the rock would change greatly as the rock falls. The velocity of the rock would be reducing gradually and this would continue until the rock would attain a constant terminal velocity.

Learn more about terminal velocity:https://brainly.com/question/9738088

#SPJ1

An electromagnetic wave radiating from a specific 50.0-Hz AC power line has a maximum electric field strength of 13.0 kV/m. This extremely low frequency electromagnetic pulse has a wavelength of 6.00 x [tex]10^{6}[/tex]m.

A sinusoidal graph illustrates electromagnetic waves. It is made up of time-varying electric and magnetic fields that are perpendicular to each other and to the direction that waves travel.

Inverse proportionality describes the relationship between frequency and wavelength. Longer wavelengths are correlated with lower frequency, and vice versa. The fact that a wave's speed is equal to the product of its frequency and wavelength helps to explain how these two properties are related.

Briefing:

Given that,

Frequency of the power line, f = 50.0 Hz

Value of maximum electric field strength of 13.0 kV/m

The wavelength of this very low frequency electromagnetic wave is given by using relation as:

[tex]c = f[/tex]λ

λ [tex]= \frac{c}{f}[/tex]

λ [tex]= \frac{3.8 * 10^{8} m/s }{50}[/tex]

λ = 6 x [tex]10^{6}[/tex] m

To learn more about frequency visit:

brainly.com/question/14316711

#SPJ4

A chemical rocket may launch a satellite into a Hohmann transfer orbit and maintain it there until it reaches the farthest point in the orbit by performing two very powerful burns.

They would have perished if they had been in a Hohmann transfer orbit, which would have taken around 4 weeks to return to.

To know more about satellite

https://brainly.com/question/2264467

#SPJ4

The distance travelled by the car after the brake was applied is 125 m.

The distance travelled by the car is calculated by applying the following kinematic equation as shown below.

Mathematically, the distance travelled by the car at the given average speed is calculated as;

s = [ ( v + u ) / 2 ] t

where;

The distance travelled by the car is calculated as;

s = [ ( 0 + 25 m/s ) / 2 ] ( 10 s )

s = 125 m

Learn more about distance travelled here: https://brainly.com/question/24283318

#SPJ1

A customer can choose one of six speaker systems, one of five DVD players, and one of six flat-screen televisions to design a home entertainment system:

In order to determine the number of possible system configurations

A customer is a person or business that buys items or offerings from another business. clients are vital due to the fact they generate sales. without them, organizations might go out of business.

A client is commonly defined as someone who buys a terrific, product, or carrier. more, in particular, clients are human beings or agencies currently shopping, have bought, or maybe inquisitive about buying services or products from every other character or enterprise.

Learn more about customer here:

https://brainly.com/question/26313265

#SPJ4

The inner radius of a hollow metal sphere is a, and the outside radius is b.  The hollow sphere has a point charge q in the center. There will be a distribution of q charges on the inner surface.

Electric charge can be interpreted as an excess or shortage of electrons and is the amount of imbalanced electricity (either positive or negative) in a body. There are two varieties: positive (+) and negative (–).

We all studied the structure of an atom with an equal amount of protons, neutrons, and electrons in physics and chemistry. Protons are positively charged, neutrons are neutrally charged, and electrons have a negative charge.

To learn more about electric charge visit:

brainly.com/question/9194793

#SPJ4

The given question is incomplete. The complete question is:

A hollow metal sphere has inner radius 'a' and outer radius 'b'. The hollow sphere has charge +2Q. A point charge +Q sits at the center of the hollow sphere. How much charge is on the inside surface of the hollow sphere?

A) Surface temperature is the temperature at the surface.

B) The surface density in Titan's atmosphere in molecules per cubic meter is 1.17 x 10²¹ molecule/m³

C)  The density of Earth's atmosphere is  0.0012 g/cm³

A) Surface temperature is the temperature at the surface, it can be defined differently for different surfaces:

Surface air temperature, air temperature near the earth's surface.

Sea surface temperature, the temperature of water near the surface of the ocean.

Global surface temperature, the combined global average of surface air temperature and sea surface temperature.

The surface temperature of the star, often the effective temperature.

B) According to the Gas equation, PV = nRT

P: pressure = 1.5 Earth-atmospheres = 1.5 atm

R: ideal gas constant = 8.205 m^3.atm.mol^-1.K^-1

T: temperature in Titan = 94K

n: number of moles

So as to calculate no. of moles per cubic meter N = (n/v) = (P/RT)

N' = N*A = (AP/RT)

A: Avogadro's number = 6.022*109^23 molecules/mol

N': molecules per cubic meter

By putting all the values in the formula,

N' so obtained is 1.17 x 10²¹ molecule/m³

C) The density of Earth's atmosphere 0.0012 g/cm³ or 1.217 kg/m³.

To know more about Surface temperature,

https://brainly.com/question/13805773

#SPJ4

Mathematically, F is1.56 represents the resulting force of friction on the block. The Frictioval force's mathematical equation is typically represented as F is uN.

Explanation:

Mathematically, F=1.56 represents the resulting force of friction on the block.

The Frictioval force's mathematical equation is typically represented as F=uN.

u equals the friction coefficient.

N is normal force.

frictional force

As a result, the force of friction on the F=10.4*0.15 F=1.56

To learn more about Force of friction refer to:

https://brainly.com/question/24386803

#SPJ1

The general instinct hypothesis, which contends that people are physiologically predisposed to or possess inclinations for violent behaviours, is known as the instinct theory of aggression in psychology.

In an effort to understand why we become aggressive and whether that behaviours can be altered, psychologists have developed three primary theories of aggression. Although many hypotheses have been put out, these three have proven most reliable and are crucial to comprehending the origins of violence. These hypotheses comprise as,

To know more about theory of aggression

https://brainly.com/question/3197702

#SPJ4

The path taken by a light beam after passing through a mirror's focus is where it hits the mirror and reflects back in exactly the same direction as it went in.

Specular reflection is the name for this. A smooth surface allows light to bounce back at the same angle that it was incident. Rays of light that are reflected off of a smooth surface go in that same direction.

The narrow beams of light that travel in straight lines along their courses as electromagnetic waves are known as rays. Though its path might be altered by reflection or refraction, light always moves in a straight line.

To know more about path of the light ray visit :-

https://brainly.com/question/3703500

#SPJ1

Coherence is a property of a system or text that refers to its internal consistency and the logical relationships between its parts. Coherence is important in many fields and contexts, as it allows people to understand and interpret information accurately and effectively. Some specific applications of coherence include:

1.The Sun is located at one of the foci of the planets' elliptical orbits.

2.The path of the planets around the Sun is elliptical in shape. are the correct statement.

For more information on Kepler's law kindly visit to

https://brainly.com/question/12813684

#SPJ1

A fisherman has caught a fish on his pole, and to keep the pole steady he has to apply an upward force is [tex]=\quad m=(205-182.391[/tex]

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

[tex]\begin{aligned}& F_2=235 \mathrm{~N} \\& \theta=60.5^{\circ} \\& L=3.5\mathrm{~m} \\& d=0.45\mathrm{~m}\end{aligned}[/tex]

calculating torame about 'A'

For equilibrium[tex]$\sum \tau_A=0$[/tex]

$$[tex]$$\begin{aligned}& \Rightarrow \quad \vec{F} \times \vec{L}+\vec{F}_2 \times(\overrightarrow{L-d)}=0 \\& \Rightarrow \quad \vec{F}_1 \times \overrightarrow{L_1}=-\vec{F}_2(\overrightarrow{L-d}) \\& \Rightarrow \quad F_1 \cdot L \sin \theta=F_2 \cdot(L-\alpha) \sin \theta \\& \Rightarrow \quad F_1=F_2 \frac{(L-a)}{L} \\& \Rightarrow \quad F_1=235 \cdot \frac{(3.5-0.35)}{3.2} \\& F_1=182.58 \mathrm{~N} \\&\end{aligned}$$[/tex]

[tex]For equilibrium $\quad \Sigma$ fret $=0$$$\begin{aligned}& \Rightarrow \quad \overrightarrow{F_2}+\overrightarrow{F_1}+\overrightarrow{m_g}=\overrightarrow{0} \\& \Rightarrow \quad m g .=F_2-F_1 \\& \Rightarrow \quad m=\left|\frac{F_2-F_1}{g}\right| \\& \Rightarrow m=\frac{(205-182.591}{9.8} \\& m=2.288 \mathrm{~kg} \\&\end{aligned}$$[/tex]

To learn more about force visit

https://brainly.com/question/26115859

#SPJ4

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv). the particles  eventually move back together because of mutual gravitational attraction.

As depicted in the following diagram, assume that two particles are present at positions P and Q at some point in time.

Think about a point R that is y miles away from a point Q, or QR=y PR=dy.

LP=mv0+mvd=mvd is the system's angular momentum around point P.

I The system's angular momentum around point Q is given by LQ=mvd+mv0=mvd.....(ii)

System's angular momentum about point R is given by LR=mv(d, y)+mv(y, d)=mvd....(iii)

The result of comparing equations I (ii), and (iii) is L P = LQ = LR....... (iv)

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv).

All objects with mass are attracted to one another by the gravitational attraction, which has a magnitude that is directly proportional to the masses of the two objects and inversely proportional to the square of their distance from one another.

Our feet remain firmly planted on the ground thanks to gravity, which also keeps the Moon in orbit around the Earth, the Earth in orbit around the Sun, the Sun in orbit around the galactic core of our Milky Way galaxy, and the Milky Way and Andromeda galaxies orbiting each other.

Learn more about galaxy here:

https://brainly.com/question/2905713

#SPJ4

Joan is going with speed 30 m/s. Hence, option (C) is correct.

Acceleration is the rate at which a velocity changes over time. It qualifies as a vector quantity because it possesses both direction and magnitude. Meter/second^2 (m/s^2) is the SI unit of acceleration.

Given that: initial speed of the car: u = 10 m/s.

Uniform acceleration of the car: a =  4 m/s^2.

Distance travelled: s = 100 meters.

Let, the final speed is = v

Using the formula v² = u² + 2as, we get:

v = √(10² + 2×4×100) m/s.

= 30 m/s.

Hence, final speed of the car is 30 m/s.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

(a) The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c) The wavelength, in nanometers, of the light source;

                                   λ = 331.7 nm

(d) The slit width, in micrometers;

                                   d = 20.5 µm

(a) We know that Fringe width is given by,

                                  [tex]\beta =\frac{D\lambda}{d}[/tex]

Where,

           D = slit to screen distance

           λ = wavelength

           d = slit width

Given in the question,

           D = 2.05 m

           [tex]\beta =4 cm=0.04m[/tex]

Now,

          [tex]\frac{d}{D} =\frac{\lambda}{\beta } =\frac{400*10^{-9} }{0.04}[/tex]

                 d/D = 0.0001

Hence,

            The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b) Ratio of d & λ,

                            [tex]\frac{d}{\lambda} =\frac{D}{\beta }[/tex]

                            [tex]\frac{d}{\lambda}=\frac{2.05}{0.04}[/tex]

                            [tex]\frac{d}{\lambda}=51.25[/tex]

Hence,

           The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c)  The wavelength of the light source,  

                            [tex]\lambda=\frac{D\beta }{d}[/tex]

                            [tex]\lambda=\frac{17*10^{-6} *0.04}{2.05}[/tex]

                            [tex]\lambda=331.7nm[/tex]

Hence,

            The wavelength, in nanometers, of the light source;

                             λ = 331.7 nm

(d) The slit width,

                           [tex]d =\frac{D\lambda}{\beta }[/tex]

                           [tex]d=\frac{400*10^{-9} *2.05}{0.04}[/tex]

                           [tex]d=20.5 \mu m[/tex]

Hence,

           The slit width, in micrometers;

                                   d = 20.5 µm

Learn more about Diffraction here

https://brainly.com/question/16749356                            

#SPJ4

The reactive power of the branch (Qb) can be calculated from its voltage and current 676.16 VA.

Reactive power is the power in an AC circuit that is required to establish and maintain a voltage across a load. It is associated with the storage and release of energy in the form of electric and magnetic fields. Reactive power does not contribute to the actual work output of a system and is measured in Volt-amperes reactive (VARs). Power factor is a measure of reactive power relative to the total power in a system.

Source frequency = 60 Hz
Generator impedance = 0 W
Circuit:
Vg = 170 V
R1 = 10 Ω
R2 = 20 Ω
Zb = 20 + j10 Ω

The current flowing through the generator (Ig) and the branch (Ib) can be calculated from Ohm's Law:
Ig = Vg/R1 + Vg/R2 = 170/10 + 170/20 = 17 A
Ib = Ig - Vg/Zb = 17 - 170/(20 + j10) = 17 - 16.4 + j4.4 = 0.6 + j4.4 A
Since Ib is a complex number, we can find its magnitude (|Ib|) and angle (θ):
|Ib| = √(0.6² + 4.4²) = 4.46 A
θ = tan⁻¹(4.4/0.6) = 80.16°
The voltage across the branch (Vb-n) can be calculated using Ohm's Law:
Vb-n = Ib × Zb = (0.6 + j4.4) × (20 + j10) = -8.4 + j74.4 V
The apparent power of the branch (Sb) can be calculated from its voltage and current:
Sb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = -45.48 + j367.04 VA
The real power of the branch (Pb) can be calculated from its voltage and current:
Pb = Vb-n × Ib = (-8.4 + j74.4) × (0.6 + j4.4) = -45.48 - j367.04 W
The reactive power of the branch (Qb) can be calculated from its voltage and current:
Qb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = 676.16 VA

To learn more about reactive power
https://brainly.com/question/23230296
#SPJ4

Field poles are electromagnets whose polarities change as the flow of current alternates in the field windings.

An electromagnet is a sort of magnet wherein the magnetic area is produced with the aid of an electric current. Electromagnets generally encompass cord wounds into a coil. A cutting edge through the wire creates a magnetic discipline that is focused inside the hole in the middle of the coil.

Electromagnets create a magnetic discipline through the application of power. When you introduce the modern, either from a battery or any other supply of strength, it flows through the wire. This creates a magnetic discipline around the coiled cord, magnetizing the metal as though it were a permanent magnet.

Learn more about Electromagnets here:-https://brainly.com/question/1408043

#SPJ4

A inaccessible object is a dynamic variable on the free store without any pointer pointing to it.

Utilize the sextant's arc to determine the angle. By dividing the object's distance from the point of observation by the tan of the angle you calculated, you may use a scientific calculator to get the object's height.

The measuring of heights and distances that are unreachable is made easier by right-triangle trigonometry. By drawing a right triangle with the unknown height or distance as one of its sides and a known side and angle on the other, it is possible to determine the unknown height or distance.

To know more about inaccessible object visit:

https://brainly.com/question/21989844

#SPJ4

Answer:

dynamic variable

The Charge is 0.25C while the energy is 0.55 Joules

Voltage = 2.2volts

Current = 0.25 amperes

Time = 1 Seconds

We know that

I = Qt

0.25 = Q*1

Making charge subject of the formula

Q = 0.25/1

Q = 0.25C

Now let us find Energy

E = QV

E = 0.25*2.2

E = 0.55 Joules

What is the definition of charge:

A charge is a physical property that causes matter in an electromagnetic field to experience a force.

Learn more about Charge here:

https://brainly.com/question/25923373
#SPJ1

The crane is under 5120 N of force. The crane touches the rock boulder and uses mechanical force to lift it.

Force is a physical phenomenon that can change an object's shape as well as its state of motion or rest. The SI unit of force is the Newton.

Jib, gantry, and overhead cranes are the three pieces of machinery used most frequently in the industry. Depending on the type of item to be moved, either a chain or wire rope hoist will be used. In the shipbuilding sector, material handling is the main use of overhead cranes during the assembly process.

Briefing:

Mass (m) = 400kg

Acceleration (a) = 3.00 m/s^2

Gravitational acceleration (g) = 9.81 m/s^2

Force (F) = mg + ma

Force (F) = m (g + a)

Force (F) = 400 (9.81+3)

Force (F) = 5120 N

To know more about force click:

brainly.com/question/28692142

#SPJ1

The initial momentum of the girl is conserved with the equal final velocity for both of them . Hence, the momentum of the girl is 60 kg m/s.

Momentum of a moving body is the product of velocity and mass of the body. Momentum is a vector quantity and is characterized by its magnitude and direction. The unit of momentum is Kg m/s.

During collision, the total momentum of a body is conserved. Therefore, total initial momentum of the colliding bodies is equal to the final momentum where they both move in equal velocity.

Here, the boy moves in 2 m/s. The velocity of the girl will be the same.

Hence, her momentum = mass × velocity

= 30 Kg × 2 m/s = 60 Kg m/s.

Therefore, the momentum of the girl is 60 kg m/s.

To find more on momentum, refer here:

https://brainly.com/question/24030570

#SPJ1

If you are in a car with a helium balloon in the middle of the back seat and you turn left, the balloon moves towards right.

A change in the air's surrounding density causes a helium-filled balloon to move.

The balloon operates in opposition to what your body would normally do. Therefore, if the automobile stops, the balloon will move to the back. The secret is that you are composed of materials that are significantly heavier than air and that the balloon is loaded with helium (He).

Turn left, the balloon goes right. When you turn right, the balloon moves to the left; when you stop, it moves to the right.

It has to do with the motion of the air in your car. When you start moving forward while stationary, all of the air in the car rushes to the back, where it builds up an area of higher air pressure.

To know more about helium balloon:

https://brainly.com/question/14733676

#SPJ4

Answer:

decreases

Explanation:

The thermal energy of the gob decreases by heating the air around the gob and the mold in which the bottle is made

The weight of the staging is 550N.

The weight of an object, the gravitational force caused by the presence of a large second object such as the Earth or the Moon.

The unit of measurement for weight is indeed a unit of force. This unit in the International System of Units (SI) is the Newton.

Given data : Weight of the painter ([tex]W_{p}[/tex]) = 300 N

                    Left scale's weight reading [tex](W_{L} )[/tex] = 580 N

                    Right scale's weight reading [tex](W_{R} )[/tex] = 270 N

To find the weight of the staging [tex](W_{s} )[/tex], we will set all the weight in the equilibrium.

Since the force of the staging and painter's weight is going downward we will denote them as negative. The opposite will be placed for the reading of weight on the left and right scale, which is positive.

[tex]-W_{p} -W_{s} +W_{L}+W_{R} = 0[/tex]

[tex]-300N-W_{s} +580N + 270N = 0\\[/tex]

[tex]W_{s}[/tex] [tex]= -300N+580N+270N[/tex]

[tex]W_{s}[/tex] [tex]= 550N[/tex]

Learn more about Weight here :-

https://brainly.com/question/86444

#SPJ4